Relocation error report gives cs6

Similar Questions

• MCA error report

  Hello

  I had problems a couple of days where my macbook pro would freeze and I had to manually force to close. I thought that the problem has been resolved, but last night he was going to close down without warning. When I restart the macbook pro, I get an error message stating:

  MCA error report *.

  CPU Machine Check Architecture error Dump (CPU: Intel (r) Core i5-5257U CPU @ 2.70 GHz, CPUID: 0x306D4)

  Core: 0

  IA32_MC3_STATUS = 0XBE00000000800400

  IA32_MC3_CTL = 0X0

  IA32_MC3_ADDR = 0XFFFFFF7F9B014736

  IA32_MC3_MISC = 0XFFFFFF7F9B014736

  Core: 0

  IA32_MC4_STATUS = 0XBE00000000800400

  IA32_MC4_CTL = 0X0

  IA32_MC4_ADDR = 0XFFFFFF7F9B014736

  IA32_MC4_MISC = 0XFFFFFF7F9B014736

  Core: 0

  IA32_MC5_STATUS = 0XEE0000000040110B

  IA32_MC5_CTL = 0X0

  IA32_MC5_ADDR = 0XFF7075C0

  IA32_MC5_MISC = 0 X 13880000086

  Core: 0

  IA32_MC6_STATUS = 0XEE0000000040110B

  IA32_MC6_CTL = 0X0

  IA32_MC6_ADDR = 0XFF70FBC0

  IA32_MC6_MISC = 0 X 3880000086

  Model: MacBookPro12, 1, MBP121.0167.B16 of BootROM, 2 processors, Intel Core i5, 2.7 GHz, 16 GB, MSC 2.28f7

  Graphics card: Intel Graphics Iris 6100 6100, integrated Intel Iris graphics card

  Memory module: DIMM0/0, 8 GB DDR3, BANK 1867 MHz, 0x80CE, 0x4B3445424533303445422D45474346202020

  Memory module: DIMM0/1, 8 GB DDR3, BANK 1867 MHz, 0x80CE, 0x4B3445424533303445422D45474346202020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 133), Broadcom BCM43xx 1.0 (7.21.95.175.1a6)

  Bluetooth: Version 4.4.5f3 17904, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SM0256G, 251 GB SSD

  USB device: USB 3.0 Bus

  USB Device: USB Bluetooth host controller

  USB device: USB Flash Drive

  Bus crush: MacBook Pro, Apple Inc., 27.1

  I don't know what means this error message and I hope that someone could point me in the right direction to find out what to do?

  Thank you

  Hello

  Download and run EtreCheck > http://etrecheck.com

  Then copy and paste the results in your response.

  It's free and will give us a better idea of what is the problem. No personal data is shared in the report.

• Microsoft never takes a look at the error reports I send?... it doesn't seem that you do because nothing is solved and I get the same error reports!

  I've been having problems with my computer, I continue to send error reports, but apparently, no one throws a look at them at the other end, because I keep having the same problems.  Is there really someone in Microsoft who take a look at the reports we submit?  I would really like to know!

  If you see messages like this:

  Please inform Microsoft this problem

  We have created an error report that you can send to help us improve Generic Host Process for Win32 Services.
  We will treat this report as confidential and anonymous.

  Send error report do not send

  I wouldn't count on return all useful 'response' of MS because allegedly they do not have any of your information (so how would then be able to communicate with you?) if they do not have your information, they say they will definitely preserve confidentiality, but maybe one day your contribution will help the best ways to handle errors and respond in a way that actually works to understand.

  If you choose to send things, don't forget to give long enough the process — sometimes several minutes and you will get a message back that may or may not be interesting to read, but they are usually generic "Thank you for your comments" type messages.  Sound familiar?

  If it is a known problem with a solution, you can be lucky and get some tips on how to solve this problem, but I wouldn't count on it and have never actually seen it work out that way, but I could at least give the error notification mechanism a chance and see what he has to say.  You can also find out more about works XP when you are finished.

  Some people feel that potentially sending your system information (and who knows what else) Microsoft is an intrusion into their privacy and choose to disable the function of «»  Who knows what information you send to Microsoft when you click send error report.

  If you want to know how to disable this feature, let us know and I'll tell you how.

  You probably better to solve your problem in the system the old fashioned way... by yourself (and with the help if you need it), I would like to ask a new question in the appropriate forum.

• Error report followed closely by scam phone call.__04 June 2010

  Error followed by phone call report scam. (£79 for a new Microsoft license request). I'm in the United Kingdom.

  June 4, 2010

  I, also, have just received a phone call from scam shortly after the presentation of a microsoft error report. The appellant was Asian, as if the others were and he claimed he was from Microsoft. I had downloaded a rogue file that was causing my computer works more slowly and asked me to click on the Start button and open the "run" command, he said. He asked me to type "eventvwr", this brought an observer called window events. He asked me to click on the app and got my attention to the error and warning symbols in the open list. He then asked me to click on system and see the symbols contained in this list. He then said he would connect on a technician who would correct the mistakes on my computer but my license has expired and I had to buy another before PayPal mistakes could be corrected. He quoted £79 when asked. He would tell me how to send money via Paypal when I told him that I wasn't going to send money to anyone. I said, 'as far as I know, you could be a criminal trying to pull a scam. "Anyone can phone up and say these things."  Oops, I had caught. "YOU CALL ME A CRIMINAL. "Well WELL YOU GO COME AND PASS 200 lbs ON A TECHNINICIAN BLAH, BLAH RANT, rant", and then he slammed the phone down. There, he, he. ****.

   

  Hello

  It seems that you had a telemarketing call or what we call a call of the scam. Do not provide a personal information in your.

  If you are in the United Kingdom and the appellant made an offer to help a royalty payment, you should contact the national fraud authority.  Details are on their website at:http://www.actionfraud.org.uk/

  The NFA has pledged to track down and eliminate these criminals, but they need all the help they can get to identify scams, if they do not speak that they can act.

  If you can at least get a website URL, which could be useful in a report.

  Avoid scams that use the Microsoft name fraudulently

  Cybercriminals often use the names of well-known companies, such as ours, in their scams. They think it will convince you to give them money or your personal information. While they usually use email to deceive you, they sometimes use the phone instead.

  Common scams that use the Microsoft name

  • A person of "Microsoft Support" calls to fix your computer
  • "You have won the Microsoft Lottery"
  • Microsoft "requires credit card information to validate your copy of Windows.
  • "Microsoft" send unsolicited e-mail with attached security updates

   

  Avoid these dangerous hoaxes

  We do not send unsolicited e-mail messages or make phone calls unsolicited request personal or financial information or repair your computer.

  If you receive an unsolicited e-mail or phone call which is supposed to be from Microsoft, and request that you send personal information or click on the links, delete the message or hang up the phone.

  Microsoft has none of the unsolicited telephone calls to help you fix your computer

  In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.

  Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.

  Treat all unsolicited sceptically telephone calls. Don't provide personal information.

  If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.

  If you think you might be a victim of fraud, you can report it. For more information, see: what to do if you think you've been scammed.

  You did not win the "Microsoft Lottery".

  Microsoft customers are often the target of a scam that uses messages falsely promise money. Victims receive messages saying 'You won the Microsoft Lottery!' There is no Microsoft Lottery. Delete the message.

  If you have lost money to this scam, report it. You can also send the police report to Microsoft, and we will use it to help the security forces to catch criminals who send these e-mail messages.

  To protect yourself against these e-mail hoaxes, you can use the same general orientation you use to protect yourself against phishing scams.

  Microsoft do not ask for credit card information to validate your copy of Windows

  We require that your copy of Windows is legitimate before you can obtain programs from the Microsoft Download Center or receive software updates from Microsoft Update. Our online process that performs this validation is called the Genuine Advantage Program. at no time during the validation process we request your credit card information.

  In fact, we collect any information that can be used to identify you, such as your name, e-mail address or other personal information.

  For more information, read the Microsoft Genuine software privacy statement program.

  To learn more about the program in general, see Genuine Windows: frequently asked questions.

  Microsoft sends no communication unsolicited on security updates

  When we publish information about a security software update or security incident, we send e-mail messages only to subscribers of our security communication program.

  Unfortunately, Cybercriminals have operated this program by sending fake security messages that appear to come from Microsoft. Some messages to attract the recipients to Web sites to download spyware or other malicious software. Others include an attachment that contains a virus. Delete the message. Do not open the attachment.

  Legitimate security communications from Microsoft

  • Legitimate communications do not include software updates as attachments. We never attach software updates to our security communications. On the contrary, we refer customers to our site for more information on the update or the software security incident.
  • Legitimate communications are also on our websites. If we provide information about a security update, you can also find this information on our Web sites.

  concerning

   

  Paul

• IE8 and it just started with a lot of error reports and custom back to the home page

  Well for a reason my first thread is not here so Im start again, I have IE8 and it just started with a lot of error reports and custom back to the homepage it just on the same page of the article, I was reading and said that this tab was recovered, I end up having to close on restarting the program n also since I reloaded my xp cd my sound got rough n jumps, it was well before I did this if Im not sure what to do. Im not exactly smart pc and am afraid of doing something wrong then Im left to do very limited things, any help would be appreciated

  Hello mikegrimesWQ,

  Because it looks like you have reinstalled Windows XP, what happens when you turn on your computer?  Windows loads correctly and allow you to connect with success?  Have you completed all the updates of Windows since the relocation?  Do you get errors at any time?

  What version of Windows XP you are using and which service pack is currently installed?  I would say confirming all your drivers are recognized and updated.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  Please let us know status.

  Thank you

  James

• Stop codes that are resolved by the response of error reports

  Original title: Can I get help with a miserable Tablet?

  My Windows XP Tablet has some odd features and I think that some problem. For example, I used it just with Outlook 2003 and IE 8 open and when I clicked on the X in the corner of IE to close, my PC just stopped and restarted. Now he just start up and I got this box of Signature of Microsoft Windows error saying it is error sig

  BCCode: 1000008e BCP1:C0000005 BCP2:BF84C8DE BCP3: 9AEC1C44

  BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_0

  And a Microsoft Windows box pops up telling me that the system has recovered from a serious error. I clicked on the link to see what contains the error report and it would not display until I closed this error of Lerna with BCCode on this box... whatever it is?

  But before I close this error BCCode box, I clicked on the link give me to see what contains the error report. Fortunately, I could Ctrl-C to copy it so I could paste here:

  C:\DOCUME~1\Jeff\LOCALS~1\Temp\WER8d98.dir00\Mini100411-01.dmp

  C:\DOCUME~1\Jeff\LOCALS~1\Temp\WER8d98.dir00\sysdata. XML

  Then I close the box and report the error signature box so I could click on the link on the other box to view technical information about the error report! He now seemed to burst this same darn box I pasted on it so I closed it. Now, she appeared a box offering me to send an error report to Microsoft. So I did. I saw this box before recently several times and sometimes I send and sometimes I don't send it.

  Now, after some delay, she appeared a reply box to report error with the URL http://wer.microsoft.com/responses/Response.aspx/854/en-us/5.1.2600.2.00010100.3.0?SGD=41f801ad-eaa8-4b7a-90b0-c3b9393df933 telling me

  A problem with

  has stopped working properly.

  An update tool is available from Iomega Corporation that will help solve this problem.

  And offering me a link http://download.iomega.com/beta/english/appservicespatch-w32-x86-2454.zip

  What the hell is that all about? Do I click on this link and download it? Help!

  I have an Iomega external CD - RW / DVD ROM connected via a USB cable.

  And PLEASE don't someone jump in and start accusing malware. Please just read about me.

  It is legitimate (probably for a updated driver). If you have any questions about this, contact Iomega:

  http://www.Iomega.com/support/contact/nas_phone.html

• What happens when you disable the service "Windows Error Reporting Service" in order to avoid an annoying and misleading popup error message?

  I kept getting annoying "authentication failure.  Please check your user name and password of the account '... xyz. "" error every 30 seconds. "

  I tried to restore my system and antivirus running - even to reinstall my anti-virus.  I deleted the accounts in question and kept still getting the error message.  Note, receive emails has never been a problem.

  I finally disabled the element of the system of "Windows Error Reporting Service" MS configuration and now the error pop ups have disappeared.  Is it correct to keep this function disabled?

  Thank you.

  To check the event logs, go to start / Control Panel / administrative tools / event handler.

  To achieve the reliability and performance monitor, go to start / search and type in reliability, and then double-click the program icon that appears.

  I hope this helps.  You can always check these sites periodically and do not need WER to warn you of a problem (even if it is perhaps faster) - you can check manually.  WER serves a purpose and he gives notification of a problem (which is good), but not in the circumstances that you knew.  This is a "nice to have" feature - not absolutely necessary.  We can try testing again to see if we can find the problem with WER if you're at it - or you can simply leave it off and make periodic checks of manual (decision is yours).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem connecting to Windows Error Reporting Service

  Some reports may not be uploaded to the "Windows Error Reporting Service". Please try again later.

  How much later?

  Hi Bob,

  Welcome to the Microsoft community.

  According to the application, you experience problems connecting to the Windows Error Reporting Service.

  To help solve your problem better, could you give us the following information?

  1. Since when are you facing this problem?
  2. Do you receive an error message when you connect to the Windows Error Reporting Service?

  Method 1: check if Windows Error Reporting Service is started or not.

  1. click on start

  2. in the start search box, type Services

  3. click right on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Windows Error Reporting Service started Automatic\Manual.

  Also check the dependency services that are required for Windows Error Reporting Service to run.

  To verify that double-click the service, and click the Dependencies tab.

  Method 2: I suggest you run the checker system (SFC) analysis files and check if it helps.

  See the Microsoft support Article to start the scanning of the SFC.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Method 3: use the cleanup utility disk and check if it helps.

  See the Microsoft Help Article on how to perform a disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  For any future reference.

  https://TechNet.Microsoft.com/en-us/library/bb490841.aspx

  Try these steps and let us know the results for assistance.

  Thank you

• Call phone-received a phone call from a technician who said my system was sending error reports

  Today, I received a phone call from an Indian man who claims to be a technician. He said that my laptop has been sending error reports for the last 3 months. I had to call b - s because I had just my cell phone last month and it worked perfectly fine. He said that he was with universal Tech Support and when I asked him if he works with Microsoft somehow he said that his company works with Microsoft. I was really curious so I let the call and he told me to go to ammyy.com and run the software. I did and I let him have some light control on my laptop and I noticed that it wasn't really something that just move the mouse around the screen and he was not clicking on anything. He then said that my uTorrent was the question and I still called b - s. I installed it there, but I still have to download torrents. He said that my laptop has 4000 + error messages and they have been displayed on my screen. He decided to transfer me to his manager and that's when I hung up and restarted my laptop and run a full scan once more. What caught my attention, he was actually the registration # from my laptop and he repeated to me. The first time, they called the caller ID said "unknown name, unknown number." The second time they called a number actually popped up. (516-515-7279), I decided to give the number a call, and I didn't get any answer. I searched all over the internet and Ammyy scams pop up but all scammers are pretending be Microsoft certified technicians and I heard again scammers claim that they work with universal Tech Support. Now, I'm very curious to know whether or not Microsoft is doing a collaboration with this company.

  Hello NahDeeUhh,

  That's all just a scam

  Your PC regularly send error reports to Microsoft. This helps Microsoft determine what issues affect most users. During the transfer of these technical error reports information are transferred between your computer and the Microsoft server. NO personal data are transferred, so ask yourself "How did get my information?

  Any company (or individual) can get a database of potential customers, providing that they are willing to pay for this information. It may just be a voters list that could include your address and telephone number. Whatever list it's this list gives this company/individual details that they need to cold call you.

  Unless you have a contract to support prepaid with Microsoft, then Microsoft 'never' will call you about a problem with your machine. Yes there are Microsoft Certified Software engineers out there, but they do not work to make them work for companies that are independent of Microsoft.

  If you receive a similar appeal to new everything simply replace the telephone receiver and have no more to do with the appellant. Under no circumstances should allow you remote access to your PC. This is fatal. All they are after is your personal data such as password, coordinated and banking passwords etc.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• "Reading DMA Ext" SMART error reported for a 27 "Mac (model end 2013)

  Hello

  I have experienced a strange behavior in last week, where my iMac starts upward normally, but directly obtained subsequently very slow and lazy. Each program showed the wait mouse cursor und switch between programs by using the Task Manager did not work. If available, I could click through the mouse on a different program of an application window, but only to bring in the und before then the wait cursor shown here as well.

  I had to reboot several times, until all behaved as usual.

  I checked the State of the disk hard und SMART monitor indicated failures during the power on unit (UNC at LBA). And it seemed that this error has occurred several times (once at the start of the iMac, I retried several times).

  I installed the tool console smartctl to get more detailed information and it reported an error count of 534 where were the last 4 errors of this type (history does not seem to store more errors). The last error reported was of type READ FPDMA queued (global error at LBA UNC).

  I ran a SMART long test, which passed without error.

  And if the system boots properly, there is no indication that the hard disk has a problem.

  Someone knows something similar and has a suggestion, what to do? Is there something wrong with the hard drive, controller, plugging in the cable?

  I really appreciate your thought and suggestions about this strange behavior.

  Thank you for your support in advance!

  Best regards

  René

  Here some information copied from the smartctl journal:

  ----------------------------------------------------------

  = START OF SECTION INFORMATION =.

  Phone model: APPLE disk HARD ST1000DM003

  Serial number: S1DCF1AX

  LU WWN device ID: 5 000c 50 061b9b612

  Firmware version: AP18

  [User capability: 1,000,204,886,016 1.00 TB bytes]

  Sector size: 512 byte logical, physical 4 096 bytes

  Rotation speed: 7200 RPM

  Form factor: 3.5 inches

  Device is: not in smartctl database [for details: showall - P]

  ATA Version is: DCC-2, 3-ACS T13 / 2161 - D revision 3B

  SATA version: SATA 3.1, 6.0 GB/s (current: 3.0 Gb/s)

  Local time is: Sun Jul 10 12:04:36 CEST 2016

  SMART support is: available - device has SMART capability.

  SMART support is: enabled

  = START OF SECTION ERROR =.

  Error 534 to disk works to life: 6143 hours (255 days + 23)

  When the command that caused the error occurred, the aircraft was active or inactive.

  After the completion of the order has occurred, the registers were:

  ST ST SC SN CL CH DH

  -- -- -- -- -- -- --

  40 51 00 70 b4 76 01 error: UNC at LBA = 0x0176b470 = 24556656

  Orders, leading to the command that caused the error were:

  CR EN SC SN CL CH DH DC Powered_Up_Time command/Feature_Name

  -- -- -- -- -- -- -- --  ----------------  --------------------

  25 00 20 70 76 41 00 00:27:49.218 LU DMA EXT b4

  25 00 20 70 76 41 00 00:27:45.476 LU DMA EXT b4

  25 00 20 70 76 41 00 00:27:41.811 LU DMA EXT b4

  25 00 20 70 76 41 00 00:27:38.207 LU DMA EXT b4

  25 00 10 88 08 40 00 00:27:38.204 LU DMA EXT c6

  ...

  Error 530 to disk works to life: 6143 hours (255 days + 23)

  When the command that caused the error occurred, the aircraft was active or inactive.

  After the completion of the order has occurred, the registers were:

  ST ST SC SN CL CH DH

  -- -- -- -- -- -- --

  40 51 00 70 b4 76 01 error: UNC at LBA = 0x0176b470 = 24556656

  Orders, leading to the command that caused the error were:

  CR EN SC SN CL CH DH DC Powered_Up_Time command/Feature_Name

  -- -- -- -- -- -- -- --  ----------------  --------------------

  60 00 20 70 76 41 00 00:27:34.254 LU FPDMA queued b4

  60 00 10 88 08 40 00 00:27:34.254 LU FPDMA queued c6

  60 00 10 18 22 20 40 00 00:27:34.254 READ FPDMA QUEUED

  60 00 10 a8 c7 1 d 40 00 00:27:34.254 READ FPDMA queued

  60 00 08 ff ff ff 4f 00 00:27:34.150 READ FPDMA queued

  It's a lot of information that virtually no one knows what to do with... but my guess is that everything points to a failing hard drive.

• From Firefox I get the popup "send error report". It says "firefox.exe has encountered a problem and needs to close."

  This just started today. Everything seems fine. I have just push out of the pop-up window on the side and continue to use the browser. If I click on the 'send error report' or the 'do not send' buttons Firefox then just closed!

  Strangest thing, trying to figure out!

  Oh, I tried to reboot it without Add-ons! Even I did reinstall it, still the same?

  It is best to be careful with software security extensions adds to Firefox that these tend to be buggy and it also usually takes time to get updates that work with future versions of Firefox (Firefox 32 will be published next Tuesday).

• Vista operating system. I get an error report "can't find printable HTML article.

  Firefox returns the error report, "Could not find printable html section" when you click on the printer friendly button. The printer friendly option work in Internet Explorer. Vista operating system.

  The developer of the page made a typo: the button is pressed by a script that seeks the printable element, but on the page, this item is marked printable - and JavaScript required an exact match.

  As a solution, you might set the font using the web console of Firefox. However, it would be wise to complain on the site if they did this on every page.

  To open the web console: Ctrl + Shift + k

  To correct the fault of typing, type or paste the following text at the side of the > and press ENTER:

  document.getElementById("printready").id = 'print ';

  Then click the printable version button to bring up the page in print.

  You can close the web console using the X on the toolbar or by pressing Ctrl + Shift + k new

  I hope this helps.

• When I try to attach files in hotmail, I get a message that silverlight plugin crashed and error report error on plugin - container.exe. I have the latest silverlight plugin. What should do?

  • I work on windows XP

  I have latest fire fox and silver light plugin

  • 'Silver plugin light crashed', that's what I get when I try to attach files in hotmail
  • error report on plugin - container.exe.
  • where to find the plugin - container.exe. to install and try

  Hello

  Please also try to disable the Silverlight Add-on in Tools (Alt + T) > Add-on > Plugins before you open Hotmail. You may still be able to attach files.

• install only a winxp.trying so that i receive bluescreen error.please give the solution

  I'm already installed win vista for my compaq cq60-104tu laptop.now I install only a winxp.trying so that i receive bluescreen error.please give the solution

  Hello

  It would be better if you provide the exact error message, but you can try the following procedure:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=ob-54270-1 & CC = US & LC = on & DLC = in & DLC = in & lang =

  Kind regards

  Mohammed Mukram