Relocation of skylights to Vista ser pk 2...

Similar Questions

• Satellite P with Vista series load very slow on start up

  My computer takes 4-5 minutes to load completely when I swiftch on, the office immediately loads but then seems to doing nothing for a few minutes then taskbar and sidebar start charging.

  Is this normal on Vista?

  Tried to stop unnecessary programs from startup in the taskbar but makes no difference.

  Anyone have any suggestions or help.

  Thank you

  Hello

  I assume you are using the Vista operating system. Am I wrong?
  Well, the Vista operating system needs a lot of material resources like OS first, that is to say XP.

  This is why all computers work slower with Vista for another OS that is XP but I think it is nothing exceptional, due to the fact that the Vista eat resources of the computer due to new features such as Aero, new photo and video files, Direct10X, etc..

  What you could do is update the memory which allows for slightly better performance, but you shouldn't t expect a big difference.

  Greetings

• reinstall using vista basic vista Home premium cd?

  I have more the cd of vista basic who came (or maybe not) with my computer dell laptop.  I have a vista Home premium 'upgrade', what I install and I have no base activation of vista series.  Can this work? I could probably find a family oem premium (not an upgrade) maybe that might work?

  Note: it will not start and I have a blank hard drive.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• WMP visualizations do not work even after reinstalling WMP11

  I had to replace the disc my laptop Acer Aspire 6920 a TOUGH couple of years and the technician at Staples [where I bought original] was not able to get the Vista Acer's OEM software and since the hidden partition has been lost on the original HARD disk, it just reinstalled Vista Home Premium from a DVD he had. I started to reload my music library in WMP11 and for awhile the visualizations worked very well. Once I tried to download and install a third party on the web visualization, my visualizations stops working. I just reinstalled WMP11 after downloading and running MS difficulty It Center on this laptop and I have still no visualizations, although the software of difficulty he fixed some corruptions that existed in the program files WMP11 BEFORE that I was prompted to reinstall WMP11 Centre. Is there a solution to this problem in addition to the relocation of the entire Vista operating system [I can't do anyway because Acer don't me supply the OEM DVD for Vista Home Premium]? Thanks in advance for any help you can give me...

  Hello

  Thank you for giving me some solutions to start with, but they don't solve the problem. BUT I found a solution via MS Fixit Center Online. He addressed the issue of

  "Player Windows Media stops responding after you install a third-party product that registers its own version of the Wmp.dll file"

  I downloaded the Fixit file and run the application and it solved my problem and now I have visualizations again!

  The name of the file to download and install is Microsoft difficulty he 50200...

• unidentified local network only linksys

  I have a vista ser pk 2, no problem connecting to the wireless network from the purchase in 2005, on a computer dell laptop. A few weeks ago the message appeared after having taken a booster dose, linksys, computer laptop, which provided excellent service to the pole (all bars), but when I went to connect, the error message is "unidentified network local only.»  is there a fix please?  Thank you very much, karen

  Hi KVeRost,

  Check to see if the following is useful.

  Method 1: Reset the modem and check if it helps. You can try to check for the firewall of the router and see if there are parameters that are the cause of the problem.

  Method 2: Log on to the router's Web site and update drivers.

  See also:

  The problems of Internet connection

  In Windows network connection issues

• Laptop series dv9410us - Vista repair after replacing motherboard - instead of relocation?

  Laptop series dv9410us. Black screen. No startup. HP agreed to repair free of charge.

  I have a question. I tried to save my personal data, on the eve of the blackout, but received a message that the backup failed. So no backup of some important files seriously.

  My questions are:

  1. when the motherboard is replaced, it is necessary to do a full install of the operating system?

  2. I found a Microsoft article which suggests after installation of the motherboard, the necessary changes to the system to be back compatible with the operating system can be done by following the instructions in the article: that is to do a "repair" as opposed to a complete reinstallation of the operating system. Here is the article:

  http://support.Microsoft.com/kb/824125/en-us

  3. I know, he approaches the situation from the point of view of a repair of XP, but if a similar process can be done with Vista, personal data would not be eradicated for the sake of a complete reinstallation of the operating system. If the amendments could be made when the computer is in safe mode, could the personal data left intact?

  4. it is possible at the time of the repair of motherboard - when the laptop is being repaired?

  My information from all of its activities and thousands of product photographs hang in the balance.

  The MS article refers to a modification of the sheet material... for example if someone updated their motherboard with a Chipset, Audio, etc. Your motherboard will be replaced by another which is the same, maybe a more recent revision.

  You must be aware that sometimes Service HP work recovery and restore the machine back to the form of the plant, and no, they don't back up your files first. It is always recommended to back up important files before sendin a notebook.

  If you have things that you need, I would choose a hard drive USB enclosure or an adapter to fix the hard drive on another pc and copy them.

• Cannot activate Vista using the Portégé R500 series key

  Hello

  I have a Portege R500 with Windows Vista (Business I think).
  After a system crash I had to change the hard drive.
  I didn't have a Toshiba Vista DVD so I reinstalled Vista from a DVD of Vista Business I found in the office.

  Once a few days windows now asks for activation, in the application process for the series.

  When I have the serial number on her that I found on the botton of the laptop it says is not correct figures.

  What can I do? How to make toshiba Vista DVD?

  Best regards

  Domenico Ciccopiedi

  I totally agree with kody.

  Serial number, placed at the bottom of the device belongs to the Vista preinstalled on your laptop.
  It s version an OEM and, generally, the serial key does not work with other versions of Vista operating system.

  If you want to install and use a different Vista operating system on your laptop, you will need to use the key supplied with the installation disc.

  But in your case, I would order a new collection of Toshiba of the ASP or from this site:
  https://backupmedia.Toshiba.EU/landing.aspx

  By the way; Vista on Toshiba Recovery DVD is already activated!

• Vista drivers for Satellite A200 PSAE6E series required

  Hello

  Please can someone tell me where I can download my pc drivers (all) that is
  Satellite A200 - 1 t 8 PSAE6E 05W032IT for Vista

  Thank you to

  Come see the European driver toshiba page.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Choose here:
  -Archives
  -Satellite
  -Satellite a series
  -Satellite A200 PSAE6
  -PSAE6
  -Vista 32 bit

  All that s

• Series VI of operation to help on Windows VISTA

  Hello world

  Series VI Labview 6.1 use on Windows XP is fine, but their use on the Windows VISTA operating system is a problem. LV6.1 rest features are very good.

  I used USB-RS232 converter to connect to external device where LV6.1 has been loaded on XP. I select the COM port assigned number on behalf of VISA resource for the Serial VISA block function. The number of COM Port has been selected since the device manager that recognizes my USB-RS232 converter once I connect to one of the PC's USB port that has been loaded with XP. The feature COM & LPT Port in Device Manager provides example COM7 or COM9 etc. COM port number. Select the COM port number and Labview communicates as a regular RS232 Serial Port.

  Above the feature works very well with Windows XP and windows VISTA Home Premium does not work. I can't select the COM port number to VISA VISA's Serial function block name resource. This selection of resource VISA name gets freezes and gets stuck at ASRL2::INSTR. How to make the VISA series to work? Is this a problem with VISTA operating system?

  In addition, this version of NI-VISA does not support LabVIEW 6.1. The first version of NI-VISA which supports Vista is 4.1, but that version of NI-VISA does not support the LabVIEW 6.1. You need to upgrade from LabVIEW, or use XP.

• Vista Patch Duplex for Photosmart 8100 and 8400 Series

  Some models of printer with automatic duplexer print incorrectly on the back in Vista.  In these models on the back is printed updside down regardless of the driver configuration.

  The attached zip file has a patch and instructions to fix this problem for the Photosmart 8100 and 8400 as the Photosmart 8150 and Photosmart 8450 series printers.

  Patches for other models can be found here.

  The zip file contains two files:

  PS8400.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpp8x00t. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the PS8400.pdf file and follow the instructions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

  Placeholder for updates.

• Vista Patch Duplex for Photosmart 8200 series

  Some models of printer with automatic duplexer print incorrectly on the back in Vista.  In these models on the back is printed updside down regardless of the driver configuration.

  The attached zip file has a patch and instructions to fix this problem for printers Photosmart 8200 series as the Photosmart 8250.

  Patches for other models can be found here.

  The zip file contains two files:

  PS8200.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpp8200t. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the PS8200.pdf file and follow the instructions.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

  Placeholder for updates.

• Windows vista and the air combat Simulator series World War II Europe.

  We have home edition of Windows Vista 64-bit, have loaded Microsoft CombatFlight Simulator WWII Euope series while running as "administrator."  No problem with loading.  Have a Logitech extreme 3d pro. In the development of the game, allows to calibrate the joystick very well, but when you go to missions, nothing works.  If you return together to the top, we get message asking if we want to re - calibrate the device and there a lot of symbols not words in the name of the device of the message window. Anyway to get the game to work with the joystick. We also have the Combat Flight simulator 2, Pacific Therater, and the joystick works very well with it.  Any suggestions to get the game to work?

  Hello Debicin,

  Welcome to the Microsoft Answers Forum!

  First of all, I suggest to uninstall and reinstall the drivers of joystick from Device Manager and check if it works very well. To do this, please follow the steps below:

  Click Start > type devmgmt.msc > right click on the joystick device in the list > click on uninstall > then restart the computer.

  You can also check out the link on how to troubleshoot the problems of gamepad on Combat Flight Simulator 3 (battle for Europe) and follow the steps to check if it helps solve the problem below.

  http://support.Microsoft.com/kb/811463

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• PCMCIA-CAN/2 Series 2 works on Vista soundcards?

  Hey,.

  We use the PCMCIA-CAN/2 Series 2 CAN card for our application. We head to Windows Vista very soon. I didn't know if I can use the same CAN map to the vista operating system?

  I saw some post on DAQ PCMCIA does not not on Vista? did the same thing with CAN card too? Details of the map below BOX.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1332

  Thank you

  Vandenplas - Arnaud

  Hey Proulx,.

  Thanks for the information. Do we even know if there will be new versions of the NI-CAN for the PCMCIA-CAN Support drivers on the 64 bit version of Windows Vista? There will be something that allows us to use the same PCMCIA-CAN cards?

  Thank you

  -Vandenplas

• Update security for Windows Media Encoder 9 Series for Windows Vista... Error details: Code 6B9__

  I tried several times to install the security update for Windows Media Encoder 9 Series for Windows Vista. It downloaded, but everytime I try to install it about half way through the installation it is said that it was cancelled and I got 6 b 9 error Code.  I can download and install other updates without any problem.

  Hi Ms. Morrill,

  Welcome to Microsoft Windows Vista Forums.

  You can use the tool it Fix to reset Windows Update components using the link below:

  http://support.Microsoft.com/kb/971058/en-us

  After this step, try to install the update and if you get an error and then try to install mode safe

  To enter in safe mode follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the click the button Start the arrow next to the button lock , and then restart.

  2. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  For more information follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can try to install the update mode without failure and the link is the following:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=99beebc4-553a-46f8-8245-e3d932306c93&displaylang=en

  Hope this information is useful.

  Suresh G

  Support Microsoft Answers

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my Vista operating system will not support a lexmark Printer series s600?

  I spent the last two hours trying to set up my 'Wireless' Lexmark S605 so I can print from my laptop 32 bit Windows Vista. I followed the instructions given in the installation process and used the installation cd, but was still unable to print from my laptop. Then, I downloaded the software and complete drivers (which was the last updated February 2013) from the manufacturer's website. The first error message that I got was one of the pilots be found / had failed to install. The second error message I got was:

  "Your operating system cannot support a lexmark s600 series printer. Installation cannot continue. »

  What can I do to solve this problem, if anything? (in addition to buying a new laptop which doesn't have Vista)

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  We will try to set up the printer using the tool of Lexmark.
  All the drivers and software for Setup, configuration, and usage of your device with 32-bit Windows.

  http://support.Lexmark.com/index?docLocale=en_US&page=content&ID=DR15867&locale=en&UserLocale=en_CA

  How to reconfigure your inkjet printer to join Your Wireless Network by using the http://support.lexmark.com/index?page=content&id=HO3161&locale=EN&userlocale=EN_CA wireless configuration utility

  If the problem persists, I suggest you contact Lexmark support using this link

  http://support.Lexmark.com/share/index_ca_en.html

  Thank you