Relocation of Snow Leopard on an iMac Mid-2011

Similar Questions

• Sierra on an iMac mid-2011

  What advantage is there to install OS X Sierra on an iMac mid-2011?

  Have the last what OS X installed in order to run the latest versions of applications such as Safari.

  macOS - how updated - Apple

  Before upgrade you, be sure to back up all your important data.

  And check your third-party software, IE., the printer drivers to ensure that they are compatible with macOS Sierra 10.12.

• Clone HD on SSD (Imac mid-2011)

  Hi, I have an iMac mid-2011 with 1 TB of hard drive and I'll install a SSD 1 TB as a second drive. I think I will clone the HD on the SSD with Carbon Copy Cloner. My question is: can do the clone operation after installing the SSD inside the iMac to speed up the process or I clone the HD before the opening of the iMac with the SSD connected via USB? I have only USB 2.0, I think is going to be very slow in this way... Thank you, Francesco

  Install the internal SSD if that's your plan. Start the computer from the HARD disk, and then use disk utility to partition and format the SSD drive as follows:

  Clone El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command - R until the Apple logo and progress bar appear.
  2. When the Utility Menu appears, select disk utility and click on the continue button.
  3. When disk utility loads select the SSD (generally, the entry Out-bumpy) in the list aside.
  4. Click the Partition tab in the main window of disk utility. A panel will fall.
  5. Set the GUID partition scheme.
  6. Define the type of Format Mac OS extended (journaled).
  7. Click on the apply button, then click the fact when it is active.
  8. Select the new SSD, then select restore in the menu editing of disk utility.
  9. In the drop-down menu select the volume that you want to clone - your HARD drive.
  10. Click the apply button to start the process.

  This can take some time depending on the amount of data is transferred. Disk utility also automatically clones Recovery HD from the HDD to the SSD.

• The last version/update of iTunes hangs / crashes whenever I try to open it.  It also freezes my iMac mid-2011.

  Hello!

  The latest version of iTunes hangs / crashes whenever I try to open it.  It also freezes my iMac mid 2011 and I have to force a stop to the bottom of the power button.  I have disabled all programs that I used to have to start etc (he was one of them).  Like a fool, I have not time machine my camera until I installed the update.  With iTunes left completely alone, my camera works exactly as before.

  If all goes well, thank you for your help!

  What version of iTunes installed on your Machine id?

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• Can I set up a secondary monitor to the HD on my iMac mid 2011

  Can I set up a secondary monitor to the HD on my iMac mid-2011 with no problems. I cannot afford to upgrade to the new iMac 27-inch and wanted to update my monitor.

  Is this possible on the Mid 2011 iMac?

  Yes.

  Your best option is to choose a good monitor that has Display Port or DVI input and shy away from those who only have HDMI and VGA input.

  For a display Port monitor you will need a Mini Display Port to Display Port cable if it is not provided with the monitor.

  For a DVI monitor you will need to a Mini DisplayPort to DVI adapter and a DVI cable.

• Cable Thunderbolt does not fit into the Thunderbolt ports in my iMac mid-2011

  I have a Mac Mini (purchased in early 2015) I want to fix it up to use at work. I need to reformat home using my iMac (mid 2011) as screen and then copy all files and applications from the iMac to the Mac Mini. Both have ports Thunderbolt. So I bought a Thunderbolt cable from a third party (!) and I'm baffled... the cable, both ends, is part of the Mac Mini but does not fit (either end, either the port, there are 2) in the iMac, no matter how hard I jiggle it. It is not the cable... but I'm confused as to how the TWO ports on my iMac could be wasted. Believe it or not, I have never tried to use before. PS., they are certainly the Thunderbolt ports, with the lightning bolt symbol bit.

  1A everyone has ever encountered this? All my other ports work fine.

  2. is there another way to target display mode in addition to crush on both machines? I found this article: use your iMac as a display with the target - Apple Support Display Mode and it seems that I can use only Thunderbolt, but I wanted to make sure.

  Have you tried to return to the end of the cable? Don't be offended, it's happened.

• iMac mid 2011, gray screen of death!

  Hi all! (Sorry my spelling Im Danish)

  I have an iMac mid 2011, 2 TB HD, 16 GB of Ram and a video card AMD Radeon HD 6970 M 2 GB. My problem is the gray screen of death! After starting, I see the Apple logo and progress bar. When the progress bar stops, the screen goes gray and stops loading. I tried the following.

  1. Reset the PRAM og MSC
  2. Boot in single-user mode and fsck - fy
  3. Internet starts form Apple Hardware Test - no error at all!
  4. I tried starting in safe mode, I see the logo and progress bar, but it ends with the grey screen of death
  5. Tried to start with only the original RAM
  6. Tried to start without anny perihperal eqiptment (keyboard, mouse, ect.)
  7. Tried to start mode of recovery and a USB stick and an installation DVD, I see the logo and progress bar, but it ends with the grey screen of death
  8. Tried to do an internet restotre of Apple, I see the logo and progress bar, but it ends with the grey screen of death
  9. Began the iMac in target disk mode and got access to another iMac. A ran the disc utilities and first aid, always on the go!
  10. Started the iMac in target disk mode and made a full HARD disk cloth! Make new partitions tree and a clean install of the other iMac. And after that, the iMac problem still won't start!
  11. I can boot from HARD drive of the problem (in the mode of target diks) iMac via another iMac, so I guess the drive in the iMac problem is in working condition
  12. I also assume that the screen (video card) on the iMacis problem at work order due to the fact, that I see the Apple Start logo and progressbar. As well as the Apple Hardware Test run via the Internet (no video error)

  Anny surgestions what to do? My iMac is dead?

  The very best regards Dan

  Although this program has expired may want to investigate on the iMac (27-inch): AMD Radeon 6970 M video card replacement - Apple Support program

• Lightroom cc will work on an iMac mid-2011?

  Lightroom cc will work on an iMac mid-2011?

  Ok. Yosemite is also quite common to hunger; generally not recommended for old Mac

• How to partition Snow Leopard on an iMac running El Capitan

  Hello

  I would like to ask if anyone knows the best way to go about adding Snow Leopard as a partition to an end i7 model 2015 iMac. I need to run Photoshop CS3 and use an Epson R2400 printer. None of them are compatible with El Capitan.

  I read that the partitioning may be an option, but I'm not very computer savvy so I'm having a hard time with google search information that seems contradictory. Ideally, I would like to be able to access the Snow Leopard or El Cap without having to restart. I have a copy of Snow Leopard if a partition is going to work, but some internet advice leads me to believe that I might need to buy Snow Leopard Server and run VMware Fusion, which I'm not familiar with. Any advice would be greatly appreciated. If I left out any information that would be useful to determine the best route, please let me know. Thank you very much!

  On the model of Mac, you must run the Snow Leopard Server emulation; It is too recent to boot Snow Leopard.

  (138271)

• I need to buy new RAM for my iMac mid-2011. What are the specific specifications?

  I have a mid-2011 iMac, 21.5 inches, with an Intel Core i5 to 2.7 GHz and 4 GB 1333 MHz DDR3 processor. What RAM memory should I buy? There are a lot of options with different specifications listed on Amazon, and none seems correct. Help, please! Thank you

  Jbdammarell,

  I used OWC computer for my needs memory. Here is their recommendation for your computer.

  

• Cannot install windows via bootcamp (Imac Mid 2011)

  Hi, I struggled for the last 2 days and can't seem to find how to create a windows partition and installed it.

  Note: I have a 27 inch mid 2011 Imac and run MacOS Sierra 10.12.

  I have problems with bootcamp especially at the stage of the process USB drive.

  1. I do not understand why Bootcamp assistant 2 display only tasks being #1 download the windows software and #2 install windows 10 when all apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016http ://

  

  2. I prefer to install windows 7 on my partition, bootcamp, however 'install windows 10', which means that I can't install an older version on my partition? I tried to install windows 7 via a win7 .iso file AND a win10 .iso but none of them works.

  3. whenever I try to install windows, the system do not recognize my USB (it would be with .iso win10 associated drivers or Win7 .iso. + drivers associated) and constantly asking for a disc to be inserted.

  

  My USB has been formatted through disk as MS-DOS (FAT32) volume and all utility used .iso comes from Microsoft. I don't understand why I can't have my. ISO recognized by the system.

  Help please :)

  Damien Kitsune wrote:

  1. I do not understand why Bootcamp assistant appear only the 2 tasks being #1 and #2 install windows 10 download windows software when apple support pages show 3 different tasks available as here https://support.apple.com/en-us/HT205016

  This is normal and expected behavior. Your 2011 Mac does not support the USB Windows installation. You must use a physical DVD burned ISO. Your Mac does not officially support Windows 10. The ISO files are available at https://www.microsoft.com/en-us/software-download/home .

  Documentation on Apple's site shows not all models. Please visit https://help.apple.com/bootcamp/mac/5.0/help/ for an older version (FC5).

• What is the problem with my iMac mid-2011

  Hello

  Need help find out what is the problem with my iMac to mid-2011.

  Yesterday during a reboot it just never came to life.

  On turning the power on, I get the RINGTONE to start and that's it. The screen is totally black. Nothing behind tried with a torch.

  VRAM rearmament so far I tried repeatedly, unplug and plug, all kinds of combinations of keys in the carillon and nothing.

  Connected to an external monitor and shows nothing of too - no signal.

  Any way that I can know what is wrong with it before sending it to the service tech? I suspect bad graphics card but how do you ensure?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• Bootcamp errors during the installation of the USB on iMac mid-2011

  I tried to install Windows 8.1 on my iMac for mid-2011. The problem is that my optical drive is not working properly.

  I created a USB bootable via Bootcamp Assistant on my MBPr and have tried my iMac HARD drive partitioning, using OSX disk utility and disk in recovery mode utility. I tried to leave the space as free and formatted as ExFat and fat.

  At the start of the usb drive and try to install on the bootcamp partition, I get the error that it is a MBR and not on a GPT partition.

  In addition, do not know if it's important, but it is a secondary internal drive. My main drive of OSX is an SSD. I have no problem accessing the drive in question under OSX.

  Help please!

  Mac 2011 (and more) have challenges with no DVD installs due to optical drive problems. Changes to the file info.plist Bootcamp to allow creating install USB works only partially because of start-up problems. Only two solutions that work with a high degree of success are

  1. replace the optical drive, or,

  2 http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... .

  Following two discussions have some installs successfully, but they usually lead to broken drivers or not functional Apple hardware.

  Re: Bootcamp without optical drive

  Re: Activate Bootcamp install USB for OSX 10.9 * ŒUVRES *.

• Update the iMac MID 2011 to work in FCPX with 4K

  Hi all

  I think to upgrade my iMac like mine is a MID 2011 but research on the Apple site, I don't think OMG that tilt for £2800!  My current system is an i7 3.4 GHz with 12 GB 1333 MHz RAM and AMD R HD6970M 2048 MB.
  I also installed an SSD as boot drive a few years so he tried there to justify going to the iMAC for 5K.

  Do you think I'll get a decent performance gain in FCPX edition 4K since the new iMAC
  4.0 GHz quad-core Intel Core i7, Turbo Boost up to 4.2 GHz
  32GB 1867 MHz DDR3
  2 TB disk Fusion
  AMD Radeon R9 M395X with 4 GB of video memory

  Thank you very much

  Lee

  ID to avoid the car of Fusion. Rather get a smaller SSD and use an external RAID Thunderbolt.

• My Ethernet port is not running iMac mid 2011. Pls help me.

  Hi, I have an iMac 21.5 "mid-2011. My Ethernet port is not working. Is this a software problem? Pls help me.

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  Try another ethernet cable.

  He still does not? A report with the information more wrote an effective communities of Apple Support question