Reminder Menu Templates Not found

Similar Questions

• Reminder of control not found in the DLL

  I write a DLL for use in TestStand using panels in a .uir file. Callbacks for controls are in the source file for the DLL. In another DLL function, I call LoadPanel to put the Panel in memory and I get an error saying: he cannot find the callback function to the controls on the Panel.

  I am at a loss as to why this is happening. The prototype of the function is in the header generated from the .uir file. This file is included in my DLL source file and callbacks for all controls are also in the DLL source file. Everything compiles fine, it fails at run time.

  Am I missing something here? I used the UI stuff in DLLs before and don't remember ever having this problem.

  I use CVI 7.1.1 and TestStand 3.1 (mandated by Government subscriber).

  
  

• T60p w / no BT not found, no access I/O port menu!

  Hello

  I have a T60p w / bluetooth factory, no BT option (under preload Xp or another drive of W7, in that I was going to Exchange).

  installed all the updates, update BIOS giving, nada.  No BT device not found, no radio BT under FN + F5, all the usual stuff fails.

  strange thing is that I have NO menu 'I/o port access' to all security BIOS.  That's where I would allow BT (if it is installed and not dead).

  as in this post: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Does-the-ThinkPad-have-Bluetooth/ta-p/49160... even if there is no BT, there are other products covered by this I/O menu, such as wireless, USB, etc.  How do I have an I/O menu and how to fix this?

  it sucks.  I have a 2nd T60p machine (this one without BT option), and that there is no menu access I/O port security BIOS either.  What is going on?

  Thanks in advance.

  problem solved.  It was in the bios, had to scroll down, not before, see active hidden past.

  has had a lot of work to get the stupid TP BT laser mouse to connect, but there finally.  Windows Update stopped working, gave service does not no error message.  tried everything on the net without success.  Finally fixed by the Assembly of updated Storage Manager intel of all things.  Looks like everything works now.  W7 was not a transparent installation on this machine.

• Drive 1 not found, cannot enter the bios or boot menu.

  I hope you guys can help me with a problem. I have a workstation t5400. A few days ago it stopped booting. I get a disk 0 not found: Serial ATA, Sata 0. On the bios boot screen, I can hit f2 and it says its set of entry towards the top but just goes back to the drive not found error. I tried to change the cables, tried plugging the drive into another port (which I do not know is actually activated because I can't get on the bios). I know for a fact that the drive works. I replaced the motherboard battery. I wouldn't be able to get into the bios without any installed readers?

  Any help would be a life saver. Thank you

  Morgan.

  Thank you. I unplugged all readers but that did not work at first. It took me ten minutes to realize I should probably remove the battery for a second. I finally had no error! messages and means able to enter setup. All disks have been disabled. That makes sense to me because 0 is enabled by default and it wouldn't give me a not found error if the port has not been activated and that I should still be able to access at least bott settings.

  Anyway, problem solved. Thanks for the help. I still want to know why he messed up.

• What deployed form template in the oracle applications menu is not

  I'm new to the development of the form.
  I've renamed the model form to delete the following objects.
  • blocks: BLOCKNAME, DETAILBLOCK
  • window: BLOCKNAME
  • canvas-view: BLOCKNAME
  and then
  deploy the form model oracle apps.
  
  The form is coming with the calendar and menu is not the features of narrow shape and to come are also not working.
  
  May I know what will be the issue.
  
  I also want to create a user interface in this form of model and deploy what I would do. Can someone direct me.
  
  Thanks and greetings

  for General Discussion EBS applications

  BTW
  are you sure that you have all the changes and all the libraries?

  for
  >
  Close the form feature also does not work.
  >
  You must change close_window procedure (programs-> app_custom unit) app_custom

  >
  /*
  YOU MUST EDIT THE CODE NEXT to take into account specific behaviors of your
  form, including:
  1. the "first window" of the form of identification and treatment
  a narrow window on that window as a closure of the form.
  2 see relations master / detail for detail which blocks
  There are in other windows.
  3 closing another thematic windows.
  The default code at the end of this procedure, in fact the window close.
  If you do that yourself in the present code, issue a "return;" at the end of
  your logic for your specific windows.
  */

  If (wnd = "") then
  app_window.close_first_window;
  elsif (wnd = "") then

• OPM get a "this file is not found error" but the document opens without plugin

  I'm under 64-bit Windows 7, Word 2010, OP 10.4.4.21.

  The scenario is strange.  Everything has been fine until today.  Something has changed, and now I am unable to open all the OPM Word documents (or compile compile all).  When I try, the error message ' Oracle Policy Modeling could not open document, such that an error has occurred in Microsoft Word: this file was not found ".". "  The document opens, however, but the plugin is not displayed.  I tried to reinstall OPM several times without success.  Indeed, during install it first a couple I'd always get the error message, but CERTAIN documents open with the active plugin and I could compile in the document - and some wouldn't have the plugin.  After another reinstall, OPM still throws the error, and documents open always in the background, but without the plugin active or exposed.

  I also tried to Repair Word, but do not want to reinstall office.   Excel seems to work very well.  I don't really know what was the triggering event.  The project has been using subversion when he arrived, but now all the projects on my machine, subversion or not, are concerned.  I think it's just my machine and others do not see this problem.

  Has anyone seen this?  Something corrupt?  It's almost like the word invocation simply does not work properly.

  Help!

  Thank you very much.

  OH - I found and fixed it.  Word has disabled the "Add-in".

  1. Click the File tab, click options.  A popup options will appear and then click Add-Ins.
  2. In the box macros complementary , if you see that policy modeling Word 2010 Template.dotm is disabled, you will need to enable it.  Downstairs, choose from the menu drop-down handle and click on the button 'Go '.
  3. Select the type of "Disabled" in the Management area, and then click OK.
  4. Select the item to activate, and then click the button 'Activate'.

  
  

  It was something that should have been easy.  We have a couple of experts of the Oracle takeover bid on the site and they didn't, and R & D in Australia has yet to respond to us.
  

• Host shows as "Not found" in custom webview.

  I'm running a problem with the launch of the workflows of a webview custom since the vCO to vCO 5.1 4.2.1.  When start a workflow and selecting an object (host, network, data store, etc.), the selected item will change to "not found".  I am able to select with the help of another applicant (treeview or list) or by typing the name of and by selecting in the menu dropdown.

  

  For my case of test as in the photo above, I deployed a new vCO device 5.1 (vCO configured and installed vCenter plugin only) and a new default template webview.  The only change I made to the template add the following link to default.html in the tag of the vco.

  <a jwcid="@vco:WorkflowLink" workflow="newVm" isDialog="true">New VM</a>
  

  The Web mode attribute 'newVm' is of type workflow and designates the workflow of library "Create simple virtual machine."  I logged in the Web using an ID mode who is a Director of vCO.  The screenshot above is after the launch of the workflow and the selection of a host for the "Host" field on which to create... ».  The really strange thing is that this problem will not occur when you use the Web webview!  The section spans server.log attached connection time to the webview just after the problem occurs.  Any ideas as to why this is happening?

  Found this: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2048629

  That looks like you can be on the right track to solve this problem.

• Assignment of a model of Muse to the 404 Page not found page

  I recently create a template for my blog by following these steps:

  1. I created a template in Muse
  2. I have added the {tag_pagecontent} tag on a page of Muse and assigned the page model.
  3. Then, I upload this page to Business Catalyst.
  4. BC looked the page I created in Muse as a template. I guess that's because he had the {tag_pagecontent} tag.
  5. Then I assigned the page on the blog and everything worked perfectly.

  I will now assign the main template on my website to the error page 404 Page not found so that the pages are compatible. How can I do this?

  How can I get BC to recognize a page created in Muse as a model of BC? Or simply, how can I assign a model created in Muse on 404 pages without adding a {tag_pagecontent} or similar floor in Muse? I currently don't see any models that I created in Muse as an option to select.

  Hi Rick,

  In order to access all the menu items in British Colombia, please follow the steps below: -.

  (1) on the dashboard of BC, expand the drop-down list on the upper right side that has your name.

  

  (2) select "my details".

  (3) scroll down and check the box 'enable editing of content online.

  (4) save the details.

  (5), it will ask for the password, enter it and click on continue.

  (6) controls the site again Manager menu. It must contain all the submenus.

  Kind regards

  Neha

• When I select print for a message preview mode, I get an error "the selected printer is not found." I can print the message, but I can't preview the output. I have

  I found that someone else has had this problem, but solution of Matt necessary use of the configuration editor. I followed the instructions, but by clicking on the Advanced tab, there was no Config Editor tab in order to execute the next step of the solution. BTW, I look in the console error log and see what: couldn't read the chrome manifest ' queue: / / / C:/Program % program % 20Thunderbird 20(x86) /Mozilla % 20Files / chrome.manifest'. The error itself is small box with Print Preview error as the label and The selected printer is not found as the contents of the box. Any help much appreciated.

  You look under Tools | Options | Advanced | General? In the main menu, which is the traditional one that spans the top of Thunderbird?

• Why does Firefox Mac returns 'Server not found' for a website but Safari on Mac same load site without any problems?

  The financial company Web site www.gmo.com will not appear in Firefox 32.0.02. Server not found is the only result. Safari loads Web site without any problem and Firefox for Windows computer in the House support the site without problem. All the other sites I have access, including banks, Amazon, etc. loads normally.

  What/why the Mac of Firefox version would not be able to to connect/load this site?

  The company of people told me that no one else has reported this problem and other people in my company can access the site. And they cannot reproduce the problem.

  My ISP provider could not see anything from their point of view. And access all computers to the modem/router in the House everything without any problems.

  Anyone have any ideas on what would cause this or how to go about troubleshooting?

  Thank you for your time.

  Looks like it's something on the computer. There are cookies that must be removed individually from the Firefox profile.

  To do this, go to the Firefox Menu, tap Preferences, then tap privacy and then delete cookies or cookies see the. You can search the sites that gives you problems and remove them. Restart Firefox.

  It could also be that you add a DNS server for your connection. 8.8.8.8 is google, but I don't know if this would affect given that the server is not found, not that there is no link, that's why it does not sound like a connection problem, but a cache problem. Use the Profile Manager to create and delete profiles Firefox

• go to a web page, firefox will pass it to a "file not found" but arrow to the left shows the page then goes back to 'file not found' again.

  for example. Google 'bc spca', choose www.spca.bc.ca and go. Firefox gives me this...

  File not found
  Sorry, the page you requested was not found. Please try again.

  Original URI: /assets/tab_advocate_mo.jpg

  But if I hit the arrow to the left, it shows me the page I searched for a fraction of a second, then goes back to the file not found again. This does not happen with Chrome or Internet Explorer. They go to the appropriate page.

  I am running windows 8.1 and uninstalled and reinstalled Firefox. NO GO. Help, please.

  Generally if an image on a page can not be found, Firefox does not redirect the entire page with an error message. the area of the image is just left in white. If this is not normal.

  On the error page, what do you see in the address bar, if anything?

  To check if one of your extensions could be the culprit, could test some pages from Firefox Safe Mode problem? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• Pavilion: Boot Device not found install an operating system from hard disk (3F0) hit administrator 69599233

  Device not found Boot Install an operating system press F10 to reset factory and she request password have my pw does not give me the code 69599233

  Hello

  Thanks for posting in the HP Support forum. Welcome Onbord!

  Regarding the admin code you have give, please keep the power button hold for a while until that the PC stops. Repeat using the power button and

  as soon as you do, keep hitting the key Esc (as tap-tap-tap) - you will enter boot HP like this menu:

  

  Press F10 to enter the BIOS and when it asks for password, please enter this code 76491815 to ENTER.

  Follow the on-screen instructions to change the password or delete.

• Said file not found when I try to open my mail yahoo or other sites

  page says file not found: the path that you are trying to access is invalid or inaccessible - verify the path. This happens when I want to open mail from yahoo, msn or any other site.

  Sometimes the site page will be displayed in the address bar but the page is empty and have to "Refresh" page.

  I don't like the new Firefox, can I go back to the previous?

  Press F10, or press the Alt key to bring up the 'Menu Bar' temporarily if the menu bar is hidden.

  Use "Firefox > Options" instead of "tools > Options" If the menu bar is hidden.

• I get a Debug error message: [Exception... "No node is not found" code: "8" nsresult: "0 x 80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js line: 366"] using Vista. "." I do not understand how to remove t

  Whenever I try to use google for a search, I get the error msg following Debug error: [Exception... ["No node is not found" code: "8" nsresult: "0 x 80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js line: 366"]. I saw the solution proposed to MS XP, but not for Vista. In addition, while I saw the solution, I need more explicit instructions on how to "remove the ebay extension.

  This has happened

  Each time Firefox opened

  == When I try to load google Firefox, I get the error error Debug message: [Exception... ["No node is not found" code: "8" nsresult: "0 x 80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js line: 366"]

  Tools-> Add-ons-> Extensions

  At the top of the Firefox window, click the Tools menu and select Add-ons. Modules window appears.
  In the window modules, select the Extensions Panel.
  Select the module you want to uninstall.
  Click on the button uninstall. When you are prompted, click on uninstall to confirm.
  Then restart Firefox.

  Read here:
  #How uninstall the extensions and themes | Uninstall the extensions

• ProBook 450 G2, core-i5: operating system not found

  Hello

  I expanded the partition of my C drive with force to upgrade to windows 10 since an iso file... then after restarting, I am facing the problem "an operating system is not found. Please remove storage external use... »

  I tried to boot from the start menu by pressing F9 while restarting, but no solution met! I also tried to boot from EFI file, but does not because no options that are there found.

  The disc is also OK, checked the BIOS settings option.
  
  Now what to do?

  Spoiler (Highlight to read)

  Asif_Ahmed_Joy

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the operating system not found since the Win10 Upgrade failed and tried to help.
  
  One of the things that happened during the upgrade:

  (1) it mostly completed but failed in the writing of the new boot loader files

  (2) it failed early in the upgrade, screw up your PC as well

  Allows to process 1) first - by recreating the bootloader files.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If this does not work, then we are on option 2) - which is not good news.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.

  What will work restores your computer to its original factory state using HP recovery media.
  
  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================