Cannot read file .mp4

Similar Questions

• Satellite L850-b409 - cannot listen files mp4 video

  I have proplem in audio list in files mp4 video

  I have used all the video player - multimedia player - klite Player cannot play audio files mp4 vedio
  Help, please

  My laptop is Toshiba Satellite L850-b409
  part no: pskg8v

  I have 8 64-bit windows

  Please
  heelllllllllllllllllpppppppppppppppp

  Maybe you don t have installed audio codec supporting the mp4 file format.

  You have two options:
  (1) you would be to convert mp4 files into other formats like mp3
  (2) you must install an audio codec supporting mp4.

  By the way: the * VLC player * is a freeware player that supports mp4.
  So, you should try this player too.

• Cannot read files Flac

  Hello

  I have Sansa Clip Firmware version 02.01.32A and I am not able to read files flac. I have read most of the posts about this but still cannot load on my 2G clip. They are normal flac files with the extension .flac and play fine on my hard drive.

  Any suggestions?

  I found the solution by searching in the posts more carefully.

  I had the USB setting to auto and I changed it to 'MASTER '.

  Thank you.

• cannot read files on disk or source file

  Old computer crashed and had to buy a new one. All files from the old pc photo copied from a cd/rw for transfer to the new pc. The new cd/rw pc drive will read and copy only half of the files on the disk, but the other half continue to flow upward "cannot read from source file or disk. The op Player stops and is more bed drive when I get to these files. Suggestions are greatly appreciated. Thank you.

  Hi modelkit,.

  Welcome to the Microsoft Answers site.

  It seems that the problem is related to your support. To check if the media is corrupted or not, you can follow one of the following methods:

  Method 1: Try to copy the files to another computer.

  If you are not able to copy the files in another computer, then we certainly know that the CD has bad sectors which prevent copy of file.

  Method 2: Run Xcopy to check if the disc is damaged or not:
  
  1. click on start, principally made programs, click Accessories and then right-click on command prompt, click run as administrator.

  2. type the following command line and press ENTER. In the command line, drive is the letter of the CD drive or DVD drive.
  xcopy drive:-*. * /s > c:\test1
  If the XCopy process is not successful, the CD is damaged. Therefore, the CD or DVD drive cannot read it.

  The corrupt media, you can try manually copy each file. This will ensure that most of the files is copied leaving only the files in the area of corruption.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• LR has started to refuse to import my photos from sd card. They appear in the display of the grid, all verified and ready to import, but I get the error messages. 'Cannot read file', (it of funny, since LR is SHOWING files full resolution), or "unable to

  Cannot import photos into LR. On my other computer, it works fine. With the help of LRCC 2015. Get the error message can't read files, or can not copy to the location.

  How can I simply wipe the slate clean and reinstall or re-import everything? I'm really happy with this, as I am now prevented from using the program.

  Can I reinstall LR and keep the catalog?

  Hello

  Please check what is the Destination defined in the right panel in the import window

  The error means the destination that you copy the files to is invalid or read-only.

  Change the Destination to another location and see if you can import

  Concerning

  Assani

• Photoshop Elements 12 cannot read files from Sony A7Mk2 ARW

  Hello

  My Photoshop elements program 12 (v12.1) cannot read riles gross a Sony A7Mk2 ILÇE - 7 M 2.  I've updated to the latest Adobe Camera Raw plugin (8.5.0.236) that apparently supports the raw files of the device, but it does not work.

  The error returned is "Could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw."

  I tried all the troubleshooting steps on pages using Adobe including uninstalling and reinstalling the software from Adobe.

  One of the possible reasons for the problem: on cameras supported list of page, Camera Raw plugin | Compatible cameras, the A7Mk2 appear amongst the 'Sony ILÇE -has7 M 2 "which seems to be a mistake, as the correct model is 'Sony ILÇE - 7 M 2' (i.e. without 'A'). .

  Very frustrating since I bought items for this purpose!

  Any help would be greatly appreciated.  Given the amount of photos that I take, convert to DNG isn't really a viable option.

  I think that says Sony A7Mk2 ILÇE-7 M 2 (adobe calls Sony ILÇE-A7M2) has at least camera raw 8.7.1, need so you can use the converter 8.8 adobe dng or upgrade to pse 13, that would open these files directly without the need of the dng converter.

  (you need to use help > updates in the PES editor 13 to get the plugin camera raw 8.7.1)

• Cannot read file rules

  Hello

  I loaded data successfully on another server with the same data and the same rules file and ceteris parabus the same file / rule fails with. "Cannot read the file rules ' in the error log and"unexpected error Essbase 1007083' on load results screen data.

  I tried refreshing and save the rules file as if it was a problem caused by differences on the original version of the server, it makes no difference, but does not prove that EAS has the right to write rules file in the directory it is more later saying he can't read?

  I was also on the data file with a fine for special characters tooth comb and can't find any problem, AND, as previously noted, the same file load perfectly on another server.

  I've also limited the load file down to a single line to exclude the possibility of this being caused by memory, although the original file is of modest size, a few hundred lines time columns 3, parent / child / alias.

  This is a new installation of Essbase, which does not seem to work correctly, but now that will not seem to load some files.

  I tried to restart Essbase, but the problem remains.

  My version of EAS is 11.1.2.3

  Someone at - it help please?

  Thank you

  Robert.

  Hello

  I found my own difficulty and I'm posting for the recording, so any that come after that run into the same issue...

  Save my rules file for the directory of the Essbase server rather than the file system, ceteris parabus, works perfectly.

  If someone can tell me why I would be interested.

  Kind regards

  Robert.

• Cannot read file backupset with RMAN cloning

  Hello
  
  I'm performing cloning on windows for windows operation. On the target, I took via rman backup using the recovery catalog. I got fresh backup of database as well as any archivelogs and delete the obsolete using the rman recovery catalog repository.
  
  When I connect to target, Recovery catalog and the auxiliary instance after that running some RMAN commands gives the error that it is impossible to read file backupset. What could be the reason for this. I write the list error part of RMAN please see and tell me what could be the reasons I took fresh backups and it seems that it is impossible to read this particular backup.
  channel ORA_AUX_DISK_1: reading from the backup C:\ORACLEBASE\PRODUCT\10.2.0\F piece
  LASH_RECOVERY_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M
  6YLD_. BKP
  ORA-19870: error reading backup total C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVER
  Y_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_. BKP
  ORA-19505: impossible to identify the file 'C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVERY_ '.
  AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_. BKP ".
  ORA-27041: could not open the file
  04002 - OSD: could not open the file
  S/O-error: (OS 3) the system cannot find the path specified
  switch to the previous backup
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 2010-09-27 13:17:22
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 6 to restore
  RMAN-06023: no backup or copy of datafile 5 found to restore
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  
  RMAN >
  
  
  Please help me in this matter.
  
  Kind regards
  
  Abgrall

  If your RMAN backup exists on the target server path.

  Target server: C:\Oracle\RMAN_BACKUP\

  Put on the same location on the auxiliary server.

  Auxiliary server: C:\Oracle\RMAN_BACKUP\

  When cloning also connect with your catalog of recovery that you use the catalog of recovery for the server target.

  Concerning
  Asif Kabir

  Published by: asifkabirdba on 27 Sep, 2010 14:51

• Error: cannot read file, Protocol not supported while watching a video

  Original title: can't access a video

  I try to watch a video and I get a message, can't read file, Protocol not supported, this is something new? never seen this happen until today.   I'm not good with computer, so I have no idea what to do now? I hope someone can help me

  Hello

  You can read the following article and check if it helps:

  Error message when you try to use Windows Media Player to stream audio or video from Windows Media Services: «the specified protocol is not supported»

  http://support.Microsoft.com/kb/940029

  Also check out the following link and check if it helps:

  http://social.answers.Microsoft.com/forums/en-us/xppictures/thread/02a93593-F483-4B50-836C-391acfbe8b83

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot read file on Windows 8 .mp4

  (Original title: what codec is used to convert a mp4 video?)

  A video taken with my Samsung non-puce phone seems to be in mp4 format.  After the electrician get the video from my media player on my Windows 8 tablet phone indicates it can not play the video because of the existing codec

  Hi Lou,

  I understand that you are unable to read Windows tablet 8.1 .mp4 files.

  As you have mentioned that you can not play because the necessary codec to play the file, I suggest you to use Windows Media Player to play the file and see if the problem persists.

  Alternatively, you can check the link below for more information on codecs:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8

  Hope this helps, get back to us if you need further assistance for Windows.

• Cannot read file .flv

  Original title: I installed all media players, but he does not play .flv files, why?

  I try all software like vlc Media Player, real one etc. but I not play the .flv file. Please, does anyone have the solution?

  Hello

  I suggest you use the preferred search engine to download the software or the drive to read .flv files.

  NOTE: THIRD PARTY SOFTWARE WARNING

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Cannot read file wav hearing recorded in the Android device

  Hello

  I use hearing CS6 version5.0 to edit wav files and play in an Android device to test. I have a wav file that can be played with an android device, I only use my Audiotion CS6 to open and save as another file, so this file cannot be read with the same device.

  Bad feedback:

  HDR.fmt_sz 18 hdr.bits_per_sample = 16hdr.audio_format = 1

  Aplay:aplay: ' / data/media/Spk_R_Bot.wav' is not in the pcm format

  Good feedback:

  HDR.fmt_sz 16 hdr.bits_per_sample = 16hdr.audio_format = 1

  aplay: play ' /data/media/Spk_R_Bot.wav':Signed 16-bit Little Endian

  aplay: Samplerate channels [44100] [2]

  Aplay: Plays

  It seems that the main format of wav file went from 16 hdr.fmt_sz to hdr.fmt_sz 18, how config my hearing that save the wav even as the right file and can be played with android device.

  You use Libsndfile .wav option to save the file, by chance? That gives endian options and all sorts of other possibilities for wav files. That could cause all sorts of problems!

  Use the Windows PCM option at the bottom of the list only - what is almost certainly the only one that will work correctly.

• Cannot read file

  Dear friends,
  
  I've renamed 2 of my file of data, and when I run a select statement
  

  ORA-00376: file 14 cannot be read at this time
  ORA-01110: data file 14: 'D:\ORACLE\DATA\UAT\CONV_03.ORA'

  How can I handle this?

  You can verify that the status is online or not this dba_data_Files data file.

• Cannot read file .wmv

  Quick time is unable to read the present - which is available as a player to watch what I think is a video file .wmv?

  If it does not DRM, use VLC.

  If so, no Mac OS X software can play or convert.

  (144618)

• Satellite L505D-GS6000 cannot read files on recovery CD

  Hello

  Ive been trying to reset my Toshiba SATELLITE L505D-GS6000 and I get to the wizzard of recovery and he said: copying files.

  After about a half hour it it comes up with an error message saying: he can't read the files on the Cd.
  Is there another way to restore? or I have to pay for the new recovery cd?

  Hello

  Perhaps the disc is scratched or the CD/DVD drive laser lens is dirty.
  Try to clean the lens of alcohol or cotton tip.

  If this is not enough, try to copy the recovery to another disk disc using other computers.
  Then try to restore the Toshiba laptop using the new disk created.

  If this is not enough, order a new disc.
  For Toshiba notebooks US, check this:
  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF