reminder stopped working, does not?

Similar Questions

• Display driver stopped working, does not recover...

  HP Pavilion dv7-6015tx

  Windows 7 32 bit

  ATI Radeon HD 6770 m

  Hello

  I thought I had solved this problem before, but it persists today.

  A while back my pc would freeze and then recover, with pop - up saying dialogue

  "display driver has stopped working and recovered."

  Now, it does not recover, it remains just frozen.

  This does not happen when I come back to the graphics card Mobile Intel.

  It freezes when I use AMD ATI Radeon.

  My PC freezes when I lead average graph low load.

  (I watch YouTube videos via the media player and internet browsing)

  This means that I'm not hardcore gaming, however when I'm hardcore gaming my pc does NOT freeze.

  I have the latest software/driver graphic HP provides me with.

  I can't install ATI, because everything I download from there, says it's not compatible with my device.

  I also think that sometimes my pc is overheating.

  I have HP CoolSense set for maximum cooling, however I think that this is not enough. (blue screen of death)

  I tried SpeedFan software of third party temperature sensor that automatically adjusts the fan speed.

  However, I don't think that the software is compatible with my motherboard because it can read my fan RPM speed.

  I think it's the GPU causing overheating because the CPU is 50 degrees celcius at an acceptable (?).

  This is a new laptop, so there is no collection of dust or debris in the exhaust gas.

  I would like to update my graphics driver, there were no update driver since the: 2011-05-06

  Also, I would like a method to increase the speed of the fan, preferably both GPU and CPU

  to lower the temperature and components

  Even as I write this, now I got force restart the computer because it froze. (driver has stopped working)

  I realize that the graphics driver may not be the only problem

  or it may be another problem, disguised as a problem of the graphics driver.

  I am willing and pledged to use all means, (with the exception of a full recovery of my pc)

  to fix my current misadventures with my laptop.

  Kind regards

  John

  You must first update the latest version of the BIOS of your laptop.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-96635-1&CC=US&DLC=en&LC=en&os=4063&Product=5085756&sw_lang=

  Once you update to the latest version of the BIOS download and install the following softpaq and this should solve the problem:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-95106-1

  This should solve the problem.

• Stop(); Action does not work in AS3?

  I am a designer and usually work in AS2.

  But I created a movie in as3 (to use the function of the BONE), and now my actions to stop do not work.

  What I usually do for my movies, it's breaking down the film in some parts of the main timeline (content, start, end), place stops on each of these frameworks.

  And in the clips that play on these labels, I put a call:

  Stop();

  _root.gotoAndPlay ('content') etc...

  in any case none fixed this in AS3?

  I use CS4 if it matters.

  The stop() command works as well in AS3 as it does in AS1/2.  What does work is to use AS2 terms such as "_root".  In general, if a stop() command does not is because another code's fault or otherwise of the substitution of the stop().

• the stop button does not respond when I needed to stop a program

  I want my labview program to stop when I press the stop button, but this isn't the case... stop button does not work... I have used a loop in which there is event structure n structures case... I have attached my file... so please help me...

  Hello

  In your code, this can be done by using the new event on "Stop" button when press it it will give a true

  Like this

  

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Adobe flash player not working does not or does not appear as an application under Tools, options

  Adobe flash player not working does not or does not appear as an application under Tools, options

  If you can't Flash 11.3 to work and need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

• The Stop button does not appear except when I am customization settings

  I just upgraded to FF 3.6 to 8 FF. The button Stop (X) does not appear between the buttons reload and home.

  However, if I click with the right button on the menu bar and select Customize..., the X appears as it should be, then disappears again when I close customize it... box.

  Thanks for your help. This may be related to another error that I get:

  TypeError opening FF 8

  Firefox 4 and newer versions, go, Stop and reload buttons are combined into a single button at the right end of the toolbar URL or address. The button changes depending on the type of activity:

  • green arrow GB when you type in the address bar
  • Red Stop ("X") button while the page is loading
  • Reload (circular arrow) to gray when the page is finished loading.

  Separate buttons are possible (nadia: carefully read the step 3 "ball" below):

  1. Open the Customize the toolbar by clicking the Firefox button > Option > toolbars OR by clicking View > toolbars > customize if using the menu OR bar right click in an empty space on a toolbar and select Customize
  2. While customizing the window is open, Stop and reload buttons will show separate from the address bar and the search bar
  3. While customizing the window is open, drag the buttons anywhere on the Navigation toolbar
     • order Reload-Stop will bring together into a single button
     • order Stop-Reload will remain in separate keys
     • or drag a "separator" in the window customize between Reload-Stop and that they remain separated
  4. Click done at the bottom right of the window customize to finish

  See: https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• my microsoft work does not work error message that I need to reinstall, but I don't have a disck because it was already installed when I bought at walmart

  I bought my dell computer 2009 Wal-Mart, that he has is already set up with windows vista basic... and now my microsoft works does not work it says I have to reinstall.  However, he is not come with a disc. so, how can I do without having to buy a disc

  Go here: https://smartsource.dell.com

  This is where you go to download programs that have been installed on your computer that you do not have a CD for.

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Active state with menu manual not working does not with child pages

  I created a horizontal menu manual on my master page with two links (at WORK and about me). I did them manually as it was the only way I could work out how the style and the menu items to distance as I wanted. I created an active state that works for the main page WORK and the about me page.

  However, I have four child pages under the work, but when you click on one of them that the active State for labor (a green line under work) does not appear. When I return to the menu options to try to "solve" the problem and choose "All pages" all child pages appear in the main menu I want and does not solve the problem. I chose manual that I could put the line to show that under the term of WORK and not all field.

  Here is my Web site to demonstrate the problem: www.robertgreens.com

  Any help to fix this would be appreciated with gratitude!

  I managed to solve this problem (with the help of Live Chat Support). I needed to create an autour work and provide a 'normal' State which resembled the active state, so when you click on the pages of the child, it looked like work page parent menu (with a green line) below. This meant that I had to duplicate master page and do the same (deletion of the green line in the menu of work) for the words Me page. And now, everything looks the same: www.robertgreens.com

• I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I'm bitterly briv

  I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I bitterly regret it.  Help, please!

  Open the Adobe Creative Cloud application then go to preferences then sign out and then sign back with the same Adobe ID that you used to purchase the subscription photographers, that is to say the same e-mail address and password.

  Then open Lightroom and go to the Help menu and make sure that it is signed in with that Adobe ID email address.