Reminders do not persist beyond the date of end in lightning. Error or design?

Reminders do not reappear after having reached the date of "END". Other programs of the calendar, I used keep reminding until the user manually terminates it.

This is a mistake of lightning or this is normal behavior?

Currently using:
TB 31.0b2
3.3B1
Vista

You set the repeat appropriately? In lightning, you will need to define an event to repeat to infinity and ending.

It seems quite reasonable to me; I guess it's mostly a matter of terminology.

My calendar is full of repeat events; reminders to change passwords, take out the trash, attend renewals, anniversaries, birthdays etc. So yes, he can do events that recur indefinitely.

Why you run a beta version?

Tags: Thunderbird

Similar Questions

  • calendar of the prints beyond the dates requested printing - how to fix this?

    calendar of the prints beyond the dates requested printing - how to fix this?  Because that's the impression beyond the date of my request she also shows not all of my regular appointments for each date.

    Hi Sherrie,

    Thanks for posting your question in the Microsoft Community.

    Of the information, you are facing problems to print issues with the calendar.

    It would be useful that you could answer this question to help you further.

    1. what calendar you want to print?

    2. This occurs when you print by using a calendar of specific application?

    3. are you able to print other documents without any problems?

    4. have you made a recent software or hardware changes to the system?

    Please provide us with more information on the issue, so that we can help you solve the problem.

    Suggestions for a question on the help forums

    If you need further assistance, please answer and we will be happy to help you.

  • Satellite L500 will not load beyond the screen "Welcome".

    Hello

    My Toshiba Satellite L500 laptop will not load beyond the screen "Welcome". The right slider thing keeps going around and around, but won't on my desk.

    Last night, he went into a temporary profile and he got a message saying "another profile cannot load at this time please try again later".

    Any help would be greatly appreciated.
    Thank you
    Kara

    The error message is not known to me and also looking in google didn t get advice.
    Maybe your Windows operating system is confusing upward.

    Have you tried to boot Win 7 in safe mode?
    Try this. Restart your laptop, press the F8 key.
    In advanced startup options, select the option called Mode without failure.

    If the laptop does not start Safe Mode, try the last good known Configuration option.

    If this n t help, try to fix my computer. Here, you can choose between different settings.
    Who could solve that problem is HARD drive recovery that helps you define the notebook to factory settings. But it also means that your disk should be formatted!

    So be aware of this!

  • update date and time for 3.6 numbers does not show the time and does not automatically update the date

    The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

    Hi david,

    where do you find ' update of the date and time.

    Quinn

  • Repair Windows installation will not continue beyond the mark of 26 min during fill the stage of installation

    Hi there all your PC gurus

    PC fails to complete a repair of Windows XP installation. It does not go beyond the mark of 26 min during the installation phase ends. You can still move the mouse around, however installation is not continue beyond this point.

    The 2 following errors are received:
    Error installing com +.
    "of the subcomponent com + threw an exception during the processing of the OC_complete_installation Setup message.
    d:/xpsp/com/com1x/src/complussetup/Comsetup/csetuputil.cpp (line 3429)
    Error code = 0x8000ffff
    Castastrophic failure
    Cannot run the function ' DllRegisterserverc)' in
    c:/Windows/System32/clbcatq.dll ".

    Corrupted file Unregmp2.exe
    The file or the directory c:/documents and settings by default/user/start menu/programs/windows Media.lnk is damaged and unreadable. Please run the chkdsk utility. »

    PC is a Dell Vostro 1510, it is only a couple of years.

    Can someone please?

    The initial problem was that the PC did not go beyond the page of Windows to start upward. So I had to do an installation of the Dell windows XP disk repair. But I couldn't boot from the CD, (even after changing in the system BIOS boot order) to work around this problem, so I had to disable the boot on the other upward options being - HDD, USB etc. so only if it start from the disc.

    After completing the first part of the repair facility, the PC restarted to complete the second part of the installation, however I got an error message "the Kernel32.dll file is possibly corrupt. The header checksum does not match the checksum calculated.

    After some research, I solved this problem by using the windows recovery console to extract a new copy of the kernel32.dll from the windows XP disc. It seemed to work. The second part of the window repair facility restarted successfully, but now the problem is it will not complete installation, it gets stuck/not will not go beyond the 26 minute mark during the phase of "complete installation."

    It has been full of hiccups. I'm not a person of computer tech at all, but have managed to get so far at this stage.  Can someone please please help, very much appreciated.
    Thanks :)

    Hello

    Follow the steps from the link: you receive the error message "UNREGMP2." EXE - Entry Point not found"when you upgrade or repair Windows XP: http://support.microsoft.com/kb/889288

    You can also try the steps from the link which is very useful for troubleshooting Windows XP startup problems:

    How do I recover from a corrupted registry that prevents http://support.microsoft.com/kb/307545 of Windows XP startup

  • TDSB import error "does not exist in the data store."

    I have a problem when you import a relative definition, do not know if it is to have a focus in the name.

    When I run the command on the server,

    Java com.fatwire.csdt.client.main.CSDT $WCS_CONTENT username = password CS_USER $= $CS_PASS resources = ImagePD:876f1718-06e7-40bd-bbc3-cea02d07d1f1 cmd = listds

    I have the answer,

    No such resource (s).

    But the file exists in the directory,

    sites\export\envision\cs_workspace\src\_metadata\ASSET\ImagePD\73\10\(876f1718-06e7-40bd-bbc3-cea02d07d1f1) of notícia. main.xml

    When I run the command to import,

    Java com.fatwire.csdt.client.main.CSDT $WCS_CONTENT username = password CS_USER $= $CS_PASS resources = ImagePD:876f1718-06e7-40bd-bbc3-cea02d07d1f1 cmd = import

    I get this error message,

    [2015-05-27 19:16:50, 883 UTC] [ERROR] [.kernel. [Default (self-adjusting)'] [com.fatwire.csdt] error on import: import error: import error: resource DSKEY:ImageP-876f1718-06e7-40bd-bbc3-cea02d07d1f1 does not exist in the data store.

    com.fatwire.cs.core.realtime.DataException: import error: resource DSKEY:ImageP-876f1718-06e7-40bd-bbc3-cea02d07d1f1 does not exist in the data store.

    at com.fatwire.realtime.packager.CSDTUtil._import(CSDTUtil.java:422)

    at com.fatwire.realtime.packager.CSDTUtil._import(CSDTUtil.java:455)

    at com.fatwire.realtime.packager.CSDTUtil.Import(CSDTUtil.java:360)

    at com.fatwire.csdt.service.impl.ImportService.importData(ImportService.java:227)

    at com.fatwire.csdt.service.impl.ImportService.execute(ImportService.java:88)

    at jsp_servlet._jsp._cs_deployed._openmarket._xcelerate._prologactions._publish._csdt.__csdtservice._jspService(__csdtservice.java:223)

    at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)

    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:185)

    at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)

    at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:447)

    to com FutureTense.Servlet.ServletRequest.include(ServletRequest.java:1411)

    to com FutureTense.Servlet.FRequestObj.include(FRequestObj.java:1429)

    to com FutureTense.Servlet.JSPServices.runJSP(JSPServices.java:111)

    to com FutureTense.Platform.FileSystem.FILESYSTEMJSPManager.runJSP(FILESYSTEMJSPManager.java:463)

    to com FutureTense.Servlet.JSPServices.runJSPObject(JSPServices.java:50)

    to com FutureTense.Platform.FileSystem.FILESYSTEMJSPManager$ JSPDataFile.run (FILESYSTEMJSPManager.java:190)

    at COM.FutureTense.Common.ContentServer.jspExecute (ContentServer.java:3027)

    at COM.FutureTense.Common.ContentServer.evalTemplate (ContentServer.java:2621)

    at COM.FutureTense.Common.ContentServer.generatePage (ContentServer.java:1640)

    at COM.FutureTense.Common.ContentServer.evalPage (ContentServer.java:1276)

    at COM.FutureTense.Common.ContentServer.execute (ContentServer.java:465)

    to com FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)

    to com FutureTense.Servlet.FTServlet.doPost(FTServlet.java:62)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)

    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    at com.fatwire.auth.RequestAuthenticationFilter.doFilter(RequestAuthenticationFilter.java:193)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:701)

    at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    at com.fatwire.cs.ui.framework.UIFilter.doFilter(UIFilter.java:109)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    I think that it is not recognizing the file because the name has an accent. But I have another server that recognizes, but can not find the differences.

    Can anyone help?

    I took care of my problem.

    At the beginning of WebLogic has been set the different LANG of enconding placed in the CLASSPATH.

  • My desktop with W7 home premium HP computer does not start beyond the initial screen of HP.

    I had been doing "Master Boot Record error press any key."  for the latest two boots.  Press any key boot the computer and initialized in W7.  But, when I tried to start the computer again, he did not get beyond the initial HP screen with choice... F10, esc, F11, F12, and F9.  By pressing the keys are not going anywhere.  When I pressed ESC, I got "Loading Boot Menu... ', , but does not load the start menu. I tried to boot from a DVD, but the DVD/burner burner did not run.

    When the computer is turned on, the fire HD came a few seconds... .but then nothing.

    Solution?

    Thanks again, Hanspuppa.

    I found the problem.  I removed the CMOS battery and reinstalled.  It seems to work OK now.

  • I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

    I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

    Adobe Audition: For Macintosh

  • Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

    People,

    I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

    Here's the context:

    We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

    We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

    VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

    Here's the problem:

    I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

    The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

    I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

    "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

    After searching around, I found the following hotfixes to the U2 release notes

    • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

    • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

    I've made these changes, and I still get the same error.

    When I dig in the newspaper, I see these entries in the journal of vmkwarning:

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

    (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

    At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

    Any help would be greatly appreciated...

    Thanks in advance.

    Alvin

    The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

    See if that helps the issue.

    Mike

  • Intelligent barcode fonts does not not to merge the data?

    Intelligent barcode fonts does not not to merge the data?

    When you use the data merge, I get only a pink box where the code is supposed to go. If I cut and paste the same info in place the bar works very well. Has anyone had this problem?

    It seems you work with InDesign, correct? I'll try to post your question in the general forum of InDesign: help http://forums.adobe.com/community/indesign people there will be able to provide you with more specialized expert

  • What is the date of end of support for Firefox version 19?

    I wish to confirm the date of end of support for version 19, February 2013?

    Security updates support ends when the next version of Firefox is released, so while Firefox 20 was released 6 weeks ago and 21 Firefox will be available Tuesday, May 14, that means that Firefox 19 is is no longer officially supported.

    I see that you are still running Firefox 17.

    Is there a special reason why you don't have not updated to the current version?

    The version of Firefox Firefox 17 that you are currently running is no longer compatible with security updates

    Please upgrade to the latest version of Firefox 20.0.x.

    • Help > about Firefox

  • PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

    Hello

    I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

    I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

    I have disabled the firewall on the PC and MAC

    I tried over ethernet and direct connections

    When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

    When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

    He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

    After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

    Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

    I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

    LOGS *.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

    2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

    2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

    2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

    2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

    2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

    2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

    2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

    2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

    2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

    Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

  • get all the date of end of months between two dates

    Hi all, I'll try to find together the date of end of months between two dates.
    I have the following data in a table

    WITH AS's Data1
    (
    SELECT To_Date('4/30/2009','mm/dd/yyyy') dt, 'TEST' lname FROM dual UNION ALL
    SELECT To_Date('5/01/2009','mm/dd/yyyy') dt, "TEST2" lname FROM dual UNION all
    SELECT To_Date('5/02/2009','mm/dd/yyyy') dt, "TEST3" lname FROM dual UNION all
    SELECT To_Date('5/03/2009','mm/dd/yyyy') dt, "TEST4" lname FROM dual UNION all
    SELECT To_Date('5/04/2009','mm/dd/yyyy') dt, "TEST5" lname FROM dual UNION all
    SELECT To_Date('5/05/2009','mm/dd/yyyy') dt, "TEST6" lname FROM dual UNION ALL
    SELECT To_Date('5/31/2009','mm/dd/yyyy') dt, 'TEST7' lname FROM dual UNION all
    SELECT To_Date('6/01/2009','mm/dd/yyyy') dt, 'TEST' lname FROM dual

    )

    I would like to write an application that gives you all the end date for months between two dates
    for example, if you give the date 9/1/4 and 5/6/9, the output should be
    DT          LNAME
-------------------
4/30/2009   TEST
    IF I give you the dates 01/04/09 AND 01/06/09, THEN output should be
    DT          LNAME
-------------------
4/30/2009   TEST
5/31/2009   TEST7
    as you can see, I want all the end dates of months between two dates by giving the output.

    If I give you 06/05/09 and 05/06/09, and then does so no output because there is no end of month between these two dates.
    Similarly, if I give you 30/04/09 and 30/04/09 then output should be 30/04/09 because it is an end of month date

    anyone can help to write a query. Thank you very much

    Jin
    Not sure if you need subquery, analytical functions for this.
    According to me, which should solve your purpose.

    WITH data1 AS
(
SELECT To_Date('4/30/2009','mm/dd/yyyy') dt, 'TEST' lname FROM dual UNION ALL
SELECT To_Date('5/01/2009','mm/dd/yyyy') dt, 'TEST2' lname FROM dual UNION all
SELECT To_Date('5/02/2009','mm/dd/yyyy') dt, 'TEST3' lname FROM dual UNION all
SELECT To_Date('5/03/2009','mm/dd/yyyy') dt, 'TEST4' lname FROM dual UNION all
SELECT To_Date('5/04/2009','mm/dd/yyyy') dt, 'TEST5' lname FROM dual UNION all
SELECT To_Date('5/05/2009','mm/dd/yyyy') dt, 'TEST6' lname FROM dual UNION ALL
SELECT To_Date('5/31/2009','mm/dd/yyyy') dt, 'TEST7' lname FROM dual UNION all
SELECT To_Date('6/01/2009','mm/dd/yyyy') dt, 'TEST' lname FROM dual 

)
select distinct last_day(dt) dt,lname
  from data1
 where dt between &start_date and &end_date
   and last_day(dt) <= &end_date

    also, i have another request. how would i do this without using the data i provided. lets say,
 i tell you, give me alll the months end between two dates using dual in the from clause of a query.
how would you do this in a query or pl/sql? thanks again

    Can be like that

    with data1 as(
select &start_date+level-1 dt from dual
connect by level <= &end_date-&start_date+1)
select distinct last_day(dt)
  from data1
 where dt between &start_date and &end_date
   and last_day(dt) <= &end_date
 order by last_day(dt)

    See you soon!
    Bobin

    Published by: Buga added query for updated the need

  • What is the date of end SQL server 2008 SP2 support?

    What is the date of end SQL server 2008 SP2 support?

    Have you tried Google? or:

    ASK THE QUESTION IN THE SQL SERVER FORUM:
    http://social.msdn.Microsoft.com/forums/en/category/SQLServer

  • Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

    Original title: ntdll.dll error at boot fruity loops.

    get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

    Hello
    I suggest you contact support FL. I couldn't find all of the resources for this program.
    Eddie B.

Maybe you are looking for