removal of several default profiles and backup.

Similar Questions

• Which component creates by default profile and order objects?

  Hi all

  As we know that whenever we visit the shopping page online, a default profile object and the Order object are created. Can you please tell me what component creates these objects?

  These objects even though the home page is a static page?

  Creation of ATG profile:

  Only the profile will be created whenever we visit any page in Application of ATG.

  ProfileCreation enters the servlet pipeline "ProfileRequestServlet", so for any request if the profile does not exist, it will create the profile.

  But it is also possible to avoid the creation of profile by registering only not in the servlet pipeline string. Execution of the servlet pipeline coming with the help of pagefilter for jsp.

  So using the page filter you can avoid him. IE not let all the jsps through PageFilter.

  Page filters are defined in the web.xml file.

  PageFilter

  atg.filter.dspjsp.PageFilter

  PageFilter

  *.jsp

  Order of creation in the ATG

  There may be several points of outbreak of the order is first created.

  • When we add point to order using OOTB form of management methods, if the order is not output, ATG will create an order object and add this item in the agenda.
  • At any time, if one refers to the ShoppingCart component, if there is no order, ATG will create an order.

  Kind regards

  Nitin.

• How to get the old default profile and delete the new default profile?

  Due to the power cut, I was not able to shut down my PC (windows 7). When I started it again once I started it in safe mode as i had dialogue"Windows has not stopped correctly chosen what mode to boot your PC... »

  I chose safe mode and then restarted the PC normally. But when I started FF, he behaved as if it were the first time installed and all my settings were gone.

  Open the Profile Manager and he showed only 1 default profile where, as I have 2 (default and another profile). This new default profile is completely new.

  I found my profile folder. It contains 3 profiles. My previous default and the other that I had created. And the third profile is new default. How do you take the 2 earlier

  Hello! You can copy your old information in your profile again (and since you had two old profiles to be restored, you can also create a new another profile for the second). It's all about copy - paste between folders, more information here: recovery of data from an old profile.

  Information on how to create a new profile here: use the Profile Manager to create and delete profiles Firefox.

• I just edit the default profile and no longer see IMAOP files even if they are in the profile. How can I access these

  Hello

  I add to change the settings of an account email (server name has changed) and mail flows always to and from the account. But all mail in the IMAP folder is no longer displayed in Thunderbird just mail that came in since the change. How to restore access to the IMAP folder, the account always uses the IMAP protocol.

  Nigel

  With IMAP, all mail is handled on the server. Therefore, you must not modify the server to an existing account.
  Restore the original server setting. Then create a new IMAP account for the new server.

• How to customize the default profile Win7

  Hello

  I was hoping someone could help me; I'm trying to customize my Windows 7 default profile.  The way I used to do in the past with WinXP was to:

  1. Create a local user account that have no administrator rights
  2. With this local user logon and tweak the desktop and applications like I wanted
  3. Reboot and a map than the machines of local disk to another computer
  4. Make a copy of the original default profile and name it "Profile by default (Original)"
  5. Copy the contents of the local user profile account I logged in earlier and paste it into the default user profile

  It worked like a charm and all connected users subsequently received the twisted user profile that I created.  With Windows 7, I use a lot of permission issues (even if I am logged in as a domain administrator or a Local administrator).  Also, I have granted local administrator rights 'Owner' on the default profile and it is still impossible to copy.  Unfortunately, I do not have a specific error.

  Any help would be greatly appreciated that makes me crazy.  It's something that I used to be able to do so simply with XP.

  Thanks in advance,

  Rob

  Hi Rob,

  Here is a good KB article to help you get started. Let us know if you have any questions:

  'How to customize default user profiles in Windows 7 and Windows Server 2008 R2'

  http://support.Microsoft.com/kb/973289

  Steve <> Microsoft Partner

• How to remove auto set the profile of the vcloud Director of storage

  Hello

  I would like to delete the free storage set the vcloud Director profile. But have no corresponding button, anyone has idea?

  I already removed "self storage defined profile" and "storage cap" vcenter.

  Thank you

  Simon

  Oh ~ ~
  Sorry about that, found that it remove the provider vDC.

  Thank you

• Windows 7 crashes my profile, leaving me with the "default" profile. Even if I wipe my laptop and re-install.

  Hello

  First: I have two identical laptops purchased from Dell with the same hardware configuration - both delivered with Vista. I upgraded to W7 as soon as possible, and since then, one of the laptops does not load my profile several times.

  I use to work as a system administrator, so of course, at the beginning, I didn't much attention to the mistake thinking it was just an incident. I formatted the computer, reinstall W7 and, of course, the error occurred again - constantly even if I wiped it and re-install.

  What is happening is that the computer starts, I connect Windows crashes for the moment very loong and then all of a sudden he says "preparing your desktop". When that happens I know its load under the 'default user profile', it's 'welcome '.

  This error occurs about two to three times in about 7 days. But not all the time - it's like periods. I usually get through this by organizing the closure for 4 seconds, restart, and then, if I'm lucky, gets through my office.

  A few times that I had no chance - restart of 6 times in a row without luck somehow shows that the profile files are really damaged, and then I created a new migration profile all my old files. This process takes time - not simply copy my files but also the settings of my program.

  Last week, I deleted my user just to create a new one-8 it recharges without success.

  I looked in eventvwr.msc and found that everything begins with six fouls in a row. I don't really know what do - the error log says error but it seems not very well describe it.

  It goes like:

  1 error:

  Windows could not load the registry. This problem is often caused by insufficient security rights or insufficient memory.

  DETAIL - the process cannot access the file because it is being used by another process.
  for C:\Users\[my account] \ntuser.dat

  EVENT ID: 1508
  TIMESTAMP: 2010-12-30 10:03:46

  2nd error:

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile.

  DETAIL - the process cannot access the file because it is being used by another process.
  EVENTID: 1503
  TIMESTAMP: 2010-12-30 10:03:46

  3rd error:

  Windows has backed up this user's profile. Windows tries to use the backup profile the next time this user connects automatically.
  EVENTID: 1515
  TIMESTAMP: 2010-12-30 10:03:46

  error 4:

  Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
  EVENT ID: 1511
  TIMESTAMP: 2010-12-30 10:03:46

  error 5 (a warning):

  Windows cannot copy file C:\Users\Default\NTUSER. DAT to the C:\Users\TEMP location. [Name]. 000\NTUSER. DAT my PC. This error can be caused by network problems or insufficient security rights.

  DETAIL - the process cannot access the file because it is being used by another process.
  EVENT ID: 1509
  TIMESTAMP: 10:03:47

  error 6:

  Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.
  EVENTID: 1505
  TIMESTAMP: 2010-12-30 10:03:48

  I don't know what it is. I can only say that reinstall W7 does not help. And lately, after creating the new profile, W7 began to start the default new desktop computer.

  So my question is: can I fix? If its not repairable can at least save files like ntuser.dat to crush the ntuser.dat file damaged W7 start sleeping?

  On the comp: 3 GB RAM, Core Duo2. The computer is used only for navigation on the internet, written for my studies and other reports not _ none of the weird stuff and no games at all.

  p

  Software properly written (as opposed to malware, viruses, and poorly written stuff) has similarly on day 1 after installation on 30 days. So you can go ahead with your driver and software installation as fast as you want, as long as you create a new file image at strategic points and keep notes dates when you installed this component.

  Given your experience, you will need to proceed cautiously with the automatic updates. First disable them, and then put the installation in Manual Mode so that you can install in small batches, again take notes.

  If you use Acronis image to create images, then you will need only half of space compared to the native tool. And if divide you your drive and put your personal files on the D: drive then you will not lose them during a restoration of the image.

  Be sure to keep your Windows Firewall active at all times and use a router. Make an Internet connection without a router (which is a hardware firewall) request in trouble. If you use a wireless network, make sure you use a WEP or WPA or MAC address screening encoding.

• computer may have been hacked. I have 2 eponymous profiles and one is status = backup

  I tried to use the following text:

  http://support.Microsoft.com/kb/555473

  The problem is when I search for the profile I want to copy, there are 2 profiles with the same name. We have the following text:

  Size = 24 MB Type = Local status = modified backup = 1/17 (several days ago)

  The other reads as follows:

  Size = 4 MB Type = Local status = changed Temp = 1/20 (current date)

  When I created a new Admin profile and tried to copy the profile (24 MB) more GREAT in the new Admin profile, I get an error of copy... something to do with the cyclic redundancy check.

  While I would not lose the files on my machine, if I have to I will eradicate the disk and reinstall everything... even though I would have preferred to be able to get the largest profile off backup status so I can get it all back.

  Help?

  Hello

  What is the full error message that you receive?

  (a) you can run a check disk full on your machine.

  For more information, please visit this link: How to perform disk error in Windows XP check

  (b) thereafter, try to copy the data from the old account to the new account.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I change the drive and directory that uses default profiles 3.6?

  My C:\ drive is getting overloaded. Can I switch my Firefox 3.6 default profile to another drive and directory? If so, I guess that profile management and Backing Up Your Info sections apply.

  You can use the Profile Manager to create a new profile on the other disk (choose location).
  
  Be sure to specify a new, empty folder for the profile.

  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Moving_your_profile_folder
  • https://support.Mozilla.com/kb/backing+up+your+information

• Firefox running error with several profiles and - no.-remote set

  I created two profiles. One turn firefox 4 and one for firefox 3. I run both for test purposes in an environment of websolution. The profiles are called respectivally firefox4 and firefox3 and these are the only profiles. I changed the shortcuts to read
  Path/to/firefox4/Firefox.exe Pei firefox4-no-remote
  and
  Firefox3 Pei Path/to/Firefox3/Firefox.exe-aucun-distant

  Now I can start two versions of shortcut there at the same time. But when firefox 4 is open (I want to use it as default browser) and I clicked on a link in another program (i.e. a link in an email open in thunderbird or from a twitter app) I get an error:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  I thought that with you-no-in case of problems of distance options like this. Is there something I'm missing or is there a fix for this problem?

  You cannot use the -no-remote command for a profile that is the ' default browser / profile ".

• I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names.

  * Original title: file names of photos of Deletig Windows after emptying the file

  I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names. How can I delete the file names?

  Right-click on the name of the image file, then choose 'delete '.

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• Is it possible to change the default location where Firefox stores its profiles and browsing history

  Normally the profiles and browsing history stores in %APPDATA%\Mozilla\Firefox

  Now, I want to change the location somewhere ("like in the office"), even during installation or after the installation of Firefox.

  Can someone help me...

  Thanks in advance...

  Mickael Kuramala.

  Hello Michael, you can use the Profile Manager to create a new profile in a custom location. more information is available to use the Profile Manager to create and delete profiles Firefox.

• How to remove an administrator user profile in windows vista?

  My computer has 2 Administrator profiles. One of them is here over the years and one of them was recently created accidentally. I am trying to remove this accidental profile but when I go into control panel > user accounts > add or remove user accounts and click the appropriate profile, it doesn't have an option "Delete account" as do all other accounts. So I tried the signature on the account I wanted to remove and remove it from there again once, the option 'Remove account' is not there, but he is there for all accounts - same Director of another one. How can I remove this unwanted profile?

  Hello

  By default in OS 4 coming
  Default administrator, guest, help support.ms / remote,.
  You cannot delete default admin, you can remove accidental created admin
  Instead of delete, you can DΘsactiver this admin account, log in as a lead Director
  Press win + r > run > lusrmgr.msc > double click on the administrator to find user folder > click right properties > check account disable > fact
  If you want to disable admin created accidentally do disable same.but only, before taking off to disable that represent files and backup files

• Is it possible to fix a corrupted by default profile

  After you fix a corrupted profile, I noticed that most of my programs to "all programs" was missing, but they still exist in program files/program (x 86).  I decided to save my information and the profile to remove completely.  I let the system to create a temporary profile, but he has always had the same problem.  I created a new profile has always had the same problem.  I came to the conclusion that the default profile on the system is corrupt, and I'm at a loss to know what to do.  As a last ditch effort, I copied the last known copy of my regback registry files with no luck.

  I am running Windows 7 Home Premium 64-bit.  Any ideas on how to solve the problem at hand would be very appreciated.

  Hello

  If you have used the methods in this last link and they don't work there is not much else
  You can do it from your registry database has changed. Recreate these changes would be
  a nightmare. Easier to re - install all programs.

  --------------------------------------------------------------------------------------------------

  Not sure I will try this in your case, but it might work if the backups
  are viable Start jobs or Windows Explorer to check the
  before proceeding. Also have good backups of your data in case where.

  There are backups in the folder C:\Windows\System32\Config\Regback.

  These methods replace the registry with a backup.

  Start with a Windows 7 disc. Both the complete following restoration
  a backup of the registry.

  How do I recover from a corrupted registry that prevents Windows XP
  startup ( Vista and Windows 7 also using the instructions in the manual)
  http://support.Microsoft.com/kb/307545/

  Check this thread - you can use the command to a startup or recovery disk prompt.
  (It's Vista and Windows 7 is the same)

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  I hope this helps.