Deskjet 3000 printer problem

Similar Questions

• Deskjet 960C printer problem

  This printer worked perfectly with my Windows 7 system until a few days ago.  Now, it takes about 15 minutes to print a page - even time if black and white or color.  I don't know where to start troubleshooting.  Would it be a of the automatic updates of the system which is at the origin of the printing problem?

  Thanks for any help.

  Try printing a test page by pressing the button resume 5 seconds. If this page is slow to, it might be a cartridge problem. Get out them of the printer and check the date on the cartridges.

• advantage of ink HP deskjet 2545: printing problem

  Sometimes when I print or copy, the result is correct, but sometimes it copies and prints only like 1/3 of the page. I tried to uninstall and reinstall, stopped, but the problem always arises. Is the quality of the influential paper on the print job? Sometimes, when I want to print something, pptx pdf or doc, it will print only 1 page then it stops, as he finished. But when I see the impression of doc, it is said made when in reality it is not

  Hi @maleyhalim

  paper and/or the quality of the paper can certainly affect print quality. Please use the following document to solve the problem; Fixing the problems of print quality for the printer HP Deskjet 2540 and Deskjet Ink Advantage 2545 all-in-One Printer Series.

  If the problem persists, I suggest that we call. Do not hesitate to call, even if the printer is out of warranty maybe, cartridges could be as collateral; so, it would probably be a fee for telephone assistance. We will, at our discretion, either replace products under warranty proved to be defective or refund the purchase price.

  We could even determine after the troubleshooting that it's a problem with the printer, in which case they may offer you a discount on a newer model.

  The number to call is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

  To find the 'End of warranty' date, look in the following table for the location of the date on each product. The date follows the YYYY/MM/DD or YYYY/MM, where YYYY is the year, MM shows the month and DD specifies the day.

• HP Deskjet 3000: Prints but no ink on paper

  Have had problems with connectivity since the upgrade to Windows 10. Have not used printer in a few months. This am I able to restore connectivity and downloaded the new software. Now the printer 'prints' but nothing is on paper. Checked ink supply-says that's enough. Tried to "clean" - still nothing on paper.

  Because if the printer had not been used at the month, cartridges are dried up.

• DeskJet 5650 printing problems

  Good evening everyone,

  I have a Deskjet 5650 which do not print on the computer. When I click on 'Print' nothing happens - no flashing lights, no noise, no movement of cartridge nothing! I tried to print a page of test and configuration (now the power button / stop & pressing 4 times "down arrow"). Prints fine, but at the bottom of the test page it reade "error Code: 0402 905D.

  Anyone has any ideas on this?  Thanks in advance.

  PP

  Hello again,

  Disregard the previous post, I solved it. And I feel about as dumb as a rock in the desert. I have 2 of these printers installed and I got the wrong one pulled up in the print dialog box. Well - live, learn and laugh at yourself.

  PP

• Establishment of a used HP Deskjet D1460 printer problems

  Downloaded 140 MB of software and drivers for Windows 7, 64 bit, HP.

  Software downloaded, installed and run OK but when an attempt is made to print the test page, the printer loaded paper then the printhead moved only once all the minutes and paper moved no further.  When the power supply to the printer has been removed and reconnected, the paper was ejected empty.

  Downloaded and run HP printer install wizard for Windows.  It says that the right software and the driver was already installed. When the test page has printed, the printer running at normal speed but only the position line was printed and it had a big drag in the middle where the ink was absent.

  Downloaded and run printing HP and doctor Scan. This correctly the printer as '1400 series printer' but the only listed diagnostic test was "Fix scanning problem" (I also have a HP scanner, but it was not connected to the computer).  The next window is a list of links.  By clicking on one of the 3 links regarding a specific product, provided information about the wrong product: envy 20-d090 TouchSmart all-in - one desktop PC.

  Run the utility from Windows 'clean ink cartridges.  Cartridges moved at normal speed during the cleaning operation, but when an attempt is made to print the test page, the printer loads the paper then the printhead moved only once all the minutes and paper moved no further.

  What should I try next?

  Power off the day the next day and restarted PC, it the next morning. Print a page of a web site map.  The printer worked fine.

• Deskjet D2680 printing problems

  I have a D2680 connected by a USB cable to a laptop Toshiba under Win 7. In devices and printers, the printer is usually listed as offline. By doing a hard reset or by pressing the power button, I can finally get the printer online, but when I send a document to print, nothing happens. If I then press the power button, I get a printer error message. Sometimes when I restart my computer prints a document. I haved used several USB cables, without change. For the black cartridge light is flashing. I tried everything I read HP (cleaqning the contacts of the cartridge, restart the Print Spooler Service), but the printer is not reliable. Sometimes the power button flashes, but nothing prints ever.

  Although it seems that you have a few different problems, it looks more like a paper jam or a jam of transport.

  -Flashing lights-

  Would you say that the ink is flashing quickly or slowly?  I've seen printers to 'disconnect' due to a blockage of this nature.  You can try to clean the wheels or looking for a small piece of paper stuck in the gears or another inside the printer.

  When you get these sets of problems, can hold you down the power button and the Cancel (red X) button and at the same time to get the printer to print a test page?

  I understand that it can print when you restart the PC, but what about when you perform a hard reset on the printer (unplug the power cord from the rear while it is in use)?

  Answer these questions for me please, and I'll be happy to help you.

• DeskJet 2544: Printing problem

  My printer prints a Word document, but does not print not an email or anything on the web.  Print pop up option appears out of the box where the print preview is supposed to show just has three dots jumping around and preview impression just never came up, so it will not display.  It worked fine until last week.  The printer is relatively new.

  Can I have an answer in simple terms please, because I'm not seriously HE read and write.

  Thank you very much.

  Yes, that's perfectly fine.

  While searching on the web for similar problems with Google Chrome, many report such a reason of a lack of Net Framework 3.5 on the computer.

  Download and save the linl below and then close Chrome:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21

  Once installation is complete open Chrome and try to print, and then search for any difference.

  If it persists, can print you web pages of other browsers such as Internet Explorer or Firefox?

• HP Deskjet 3000 printer - J310a

  Printer only works with USB for laptop.  Have a wireless network using an Airport Extreme, connected to a router from Verizon.

  Printer is 'offline' and I don't know how to get "on line".

  Find the disk for the installation of the printer.  Uninstalled same and then re-installed.  Worked beautifully!

  It was the simplest and most direct way to solve the problem.

  Thanks for your help.

• HP Deskjet 5940 printing problem.

  When displaying newly print document the ends of the tail of such characters as 'y' and 'g' which protrude below the line are missing. Can anyone help?

  This happens with each printed line or only on the last line of the page?

  If you change the print quality of the 'best' that up clearly the question?

  If the answer to either is "Yes" then try cleaning the contacts of cartrdige as shown here.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• DeskJet 3055a: printing problem

  I have connected my wireless printer and it will not let me print without the help of the usb cable and when I use the lead I get blank pages when my ink cartridges are fine. Can you please help?

  Hi @Stacey1993,

  Have you tried to make a copy and print on white?

  Also, try to print a status report of the. printer

  1. Load plain white paper in the input tray.

• Driver HP Deskjet 3000 for windows 2000?

  Hello, I tried to install my HP Deskjet 3000 printer on a Windows 2000 system and I can not find a suitable driver to make it work. Can anyone help?

  Hello

  The deskjet 3000 printer is not compatible with Windows 2000, you will find listed by the operating system specified below:

  http://support.HP.com/us-en/document/c02231304

  I fear you can find no workaround possible as there are no drivers for the device that is compatible with Windows 2000.

  Kind regards

  Shlomi

• Cannot print in Win 8 and Excel 2013 Deskjet 3000 USB plugged - resolved

  Hello

  Newly installed computer running win 8/64-bit and Office 2013.  Have Deskjet 3000 USB printers.  Last driver HP and the latest installed MSFT.

  Searched for this problem and most seem to be reoslved by changing the print quality settings, I tried all project photo and same result.

  When I print from Excel, I see my spreadsheet in the Preview Print print area is correct.  I click on print and if I quickly change the status of pinter I see document number go from zero to 1 and then back to zero what any windows spooler.  I also changed printer for any coil.

  I have no problem printing form other applications Office Word and PPT, or Adobe Reader or my browsers.  Just in Excel.

  Don't know where to go from here? I ran the HP diagnostic tools and they work very well and that you can get test pages printed on them as well as Windows itself.  No error messages at all when the problem occurs, the print file seems to disappear.  I can print in a file from Excel and then print this file if its PDF without problem.

  Very mysterious!

  Thank you

  OK update:

  I removed the HP software and driver and simply use the native Windows 8 driver and everything is wonderful.  Seems strange that doesht mfg driver work but the Windows version only.  All that I know is just remove any HP software and the driver and just take the default of WIndows and life is perfect!

  Hi rich, happy to hear that the problem is now resolved, thanks for posting back with update

  

  Ciara

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• hp deskjet 1000 printer: hp deskjet 1000 problems

  hp deskjet 1000 printer is about 5 years old and has been under the back seat of my truck. I printed about 25 pages when it was new and not the have not used since then. out of the printer and now I have a dell inspiron laptop computer m531r. connected the printer hp with a usb cord and downloaded the latest update from hp. When selecting "print test page", the printer works perfectly as if it is printing, but paper comes out of the Virgin. I have cleaned the ink cartridges with paper towels soaked in alcohol, to run each test and head cleanning hp offered on the troubleshooting section. ink level indicators show the ink to about 80% full. and I updated all the parameters. I rebooted the printer and the computer. I checked and any document, when selected for printing, the printer thinks it is printing. He's even going the correct speed with spacing appropriate, etc. just comes out blank. There is nowhere any dried ink on the print cartridge heads they are clean!   the printer receives data and think it's printing. Therefore, the system does not give messages of any problem. I am concidering buying new cartridges of hp61, but it is a risk not knowing not if the problem is in the cartridge.   TS

  @tomcat056,

  You are right that there is a risk to replace the ink cartridges. In all likelihood, the cartridges are dried up and the sensor is defective. New cartridges may not solve all your problems of printer. Honestly, printers are not designed to roll the shotgun in your truck. Personally, I would take the money spend you on the new cartridges and buy a new printer.