Removal of specific blocks of text without fill color

Similar Questions

• I created a pdf with blocks of text to fill out form. Is it possible to add a record button instead of having someone go to produce and record?

  I created a pdf with blocks of text to fill out form. Is it possible to add a record button instead of having someone go to produce and record?

  You can add a save button slot for your file, but not a button Save.

• Blocks of text overlapping fill Uni transparent look in the press

  Hi all

  Looks like I need help again once.

  I have three blocks of text overlapping (to some extent) (all 100% opacity, red background fill, fill black middle and above no fill). They look good on the monitor to identity card, but they show a transparent way when printing. I can clearly see the Red bottom showing through the average black person (in the region of overlap) and the top white text looks a little red tinted (in the same region overlapping). What I am doing wrong?

  Thank you for your help.

  The preference of the appearance of Black allows you to set whether the default [Black] swatch overprinted automatically.

  Offset inks are normally transparent and the precision with which a black overprint ink display is managed by assigned with the document CMYK profile. The degree of transparency depends on the situation of the press, so overlay would be most obvious on a no bed sheet and this is reflected in the allocation of profile during separation overprint preview is on.

  This is Euroscale Coated followed SWOP bed

  

  

  Older profiles did not show the effect of black overprint, so if you have turned off the color management you wouldn't see overprinting of black.

  

• InDesign: how tilt blocks of text without distorting the text?

  I want to put in place several large blocks of copy to these requirements:

  -the basic lines of the text are at an angle on the page

  -the left and right edges of the text block are shot-on horizontal (aligned with the guides in the screenshot below)

  -the block of text can be enlarged or reduced without changing the angle of the left and right edges

  -forms of the letters themselves are not distorted

  

  This screenshot shows what I'm after.

  

  This screenshot shows the real bounding box for the text block.

  

  This screenshot shows how the angle of the text box changes when I change its size.

  I think Illustrator is a kind of function that allows you to "zero" (reset the transformations of a grid of 90 degrees) an object after it is transformed. Not finding anything like that in InDesign. And I find no way to set a custom angle constraint that would allow me to use the direct Selection (white arrow) tool to change the height or width with confidence.

  I'd appreciate some tips! Thank you for your attention.

  I do so with the example of shooting. Tilt works the same way.

  1. draw your rectangle, I applied a text frame reference grid (textframe options)

  

  2. with the Selection tool or the transform tool turn the frame in one direction, you can also do this with the entrance of the value in the transform Panel, what I would recommend.

  

  3. now, select the direct Selection (white arrow) tool and hold the ALT key and click on the frame. Now, only the frame is selected. Turn the other way, or insert the value in the transform Panel.

  

  I also have another method to offer:

  1. Draw the main frame with the text tool.
  2. Draw a small box above, it must be much smaller than the main frame.
  3. Turn the small frame in the direction that where you want to go the text.
  4. Select the two images.
  5. Go to the Pathfinder > Add.

  Now, you can add text or select a text based frame reference grid. He will do the same as above. May be simpler.

• Add style to large block of text without affecting existing styles within this text

  Hello! First post here.

  I have a long text document which for the most part, has no attached text styles (it was a mistake). However, there are a large number of stylized breast text boxes.

  Is there a way to select all of the text and apply a style to the text without style without affecting the existing styles?

  Doing so by hand by text block text block would take a very long time.

  Any help is greatly appreciated.

  THX!

  Ian

  What do you mean by "text without style? There must be a definition, anyway.

  Like others, [no paragraph Style] and [standard paragraph] are available, too.

  

• CS3/4 question, Amateur of JS: how to remove all the blocks of text empty?

  I am an amateur and thought it would be a simple matter to write a script that simply deletes all empty all text blocks in all stories of a document. Here is my second attempt:

  myDocument var = app.activeDocument;

  var myStories = myDocument.stories;

  for (i = 0; i < myStories.length; i ++) {}

  var monarticle = myStories [i];

  var myTextFrames = myStory.textContainers;

  for (j = myTextFrames.length - 1; j > = 0; j-) {}

  If (.silence myTextFrames [j] == ' ') myTextFrames [j] .remove ();

  }

  }

  The problem is sometimes it works as intended, but sometimes with multiple stories, it must be executed many times. Can someone explain why this is?

  Thank you - Jeremy

  Your problem is that you treat the stories forward, but are

  removal of the stories completely empty, then the script will skip the

  stories after that removed.

  You must do one of the following:

  (1) do not remove the first picture on any topic.

  (2) use a loop for the stories

  (3) convert the stories collection into an array:

  var myStories = myDocument.stories.everyItem () .getElements)

  Substances

• Text field - fill color

  I develop a form with a drop-down list and several text fields. Based on the user select on the drop down, other fields will change as mandatory or read-only

  To improve ease of use, I want to grey out those not required / only fields in reading.

  I'm doing it with the following script:

  this.resolveNode("textField1").fillColor = "195,195,195";

  However, legend and input area are gray out.

  Is there any script which will be gray on the box only?

  Hey Elvis Giff,

  Stefan cameron shared some good examples on this.

  http://Forms.stefcameron.com/2008/06/13/shading-the-caption-not-the-entire-field/

  http://Forms.stefcameron.com/2008/03/14/field-background-color-fill/

  Kind regards

  Rous

• How to remove hyperlinks from copied text without deleting the text in the pages 08

  How to remove hyperlinks out of copied text without deleting the text in the pages 08

  One post is enough.

  I do not have Pages ' 08, but in Pages ' 09, you select the text with the hyperlink, click the link Inspector, and deselect the option enable as a hyperlink check box.

  Otherwise, rely on the search tool in your Pages ' 08 Help menu. Search for "remove link" without quotes.

• Deleting all the blocks of text hidden unexpectedly removes blocks of text embedded (but visible). Why?

  I try to use the code below to remove all the blocks of text hidden in a document. It is works quite well, BUT for some reason, removes the visible anchor text blocks.

  (the argument currentTextFrame.length is to prevent it remove hidden text blocks if the content is threaded, in which case the text is redéroule then in blocks of text that is visible.) I need to find a solution to this, but it's tomorrow problem.)
  

  I have a similar function to allGraphics and does not remove the anchored frames.

  Can someone point me in the right direction? I can add a check to see if the text block is anchored, but I fear that I might get bored the biggest problem.

  var myDocument = app.activeDocument;
  var myTextFrames = myDocument.stories.everyItem().textContainers.reverse();
  var myTextFramesLength = myTextFrames.length;
  for ( i = 0; i < myTextFramesLength; i++ ){
       var currentTextFrame = myTextFrames[i];
       if ((!currentTextFrame.visable) && (currentTextFrame.length ===1)){
            currentTextFrame[0].remove();
       }
  }
  
  

  

  Edit: What is happening in 2014.0 and 2015.1, OS x 10.10 CC

  Post edited by: Naomi Kennedy

  Hi Naomi,

  and there is an array of arrays with:

  myDocument.stories.everyItem().textContainers
  

  Try this:

  var a = app.documents[0].stories.everyItem().textContainers;
  for(var n=0;n
  I suggest the following, which should work:
  var doc = app.documents[0];
  var myStoriesArray = doc.stories.everyItem().getElements();
  var storiesLength = myStoriesArray.length;
  
  var textContainersToRemoveIDs = [];
  
  for(var n=0;n
  Uwe
  		   

• Change the fill color of button in Captivate 7?

  I'm sure that when I used 6 Captivate and I created a button, there is an option in the properties pane to allow me to change the fill color of the button. I use 7 Captivate now, and I don't see this option. Under the 'Général' tab, it allows me to change the type of button, caption, make transparent, or allows me to see the button widgets. They remove the possibility of simply changing the fill color of a button?

  

  Change the default Transparent button Style Style.

  Anthony

• How to remove the numbers on blank lines without fully justify above the text?

  Hello everyone.
  
  I have a problem with my numbering.  I would like to delete the line numbers where there is no text.  But when I back off the line of text without deleting the number, then shift + return to add a paragraph break 'justifies all lines'.  He said that it's always "justify the last line aligned to the left", but is not, and I can't change it back. I tried to manually change the justification, but it is so hard to do with all the paragraphs, and it looks like not equal. I have attached a few screenshots to illustrate my problem.
  
  Anyone know how I can remove the numbers of the lines without text without manually clicking the line line, ranging from 'bullets and numbers' and clicking on 'none' for each line?
  
  Or if I can't do that, do you know how I can stop the above paragraph that justify completely once I deleted the number of rollback?

  
  

  Thank you very much in advance, I really appreciate all the help you can give.  It's great that forums like this are there to help.
  
  
  

  

  Above is the screenshot where you can see that there are a number (25) on the empty text line.
  This is when I removed by backspacing of the line and then shift + return to add a new line, but her line above is fully justified, and not justified with the last line aligned to the left.

  

  Thanks for your help!  Natasha, a user of InDesign beginner.
  
  

  Return shift is a forced line break, so you now a last blank line, and is the one who remains aligned. ID does exactly what it's supposed to.

  Instead of trying to use blank lines to separate paragraphs you should use space after or front of the space.

• Photoshop CS6. How to jump to a text block to another without going through the toolbar. Is this possible?

  Photoshop CS6. How to jump to a text block to another without going through the toolbar. Is this possible?

  

  Choose the (circled) T will isolate and stack layers of text to make it from one to the other just about choosing a distinctly named layer

• Resize the text without scale text block

  Hi people,

  Is it possible to resize a text frame without scaling the text in the 2014 AI CC SDK?

  I'm working on an AI CC 2014 plug-in and need to resize a text frame without scaling of the text. However, I'm not having a bit of luck to find how to do this. Is what I want to resize the text block in the Type area Options Panel makes, but I'm not able to understand how what classes/methods it uses, or whether they are still exposed in the SDK of.

  I tried to use sAITransformArt->TransformArt(), but I can't find a way to stop the text to scale with the text block. I considered, after processing, reformat the text which has been nationally, but that doesn't seem right.

  My current thinking is to move the text of the framework which should be scaling in a new block of text size correctly, and then delete the existing framework, but before that, I thought I would ask here see if do I it's harder it must be because I'm missing something.

  Thanks in advance for any help!

  See you soon!

  -Jim Birkenseer

  You must use sAITransform-> (TransformArt) on the subject of track of the image of the text, not the entire text block.

  For example:

  AITextFrameType textFrameType;
  sAITextFrame->GetType( art, &textFrameType );
  if ( ( textFrameType == kInPathTextType ) || ( textFrameType == kOnPathTextType ) ) {
      sAITextFrame->GetPathObject( art, &art );
      AIRealMatrix sMatrix;
       // Set your matrix as needed here...
      sAITransformArt->TransformArt( art, &sMatrix, 1.0f, kTransformObjects );
  }
  

• Remove the string from the text block

  I need to remove the following string "price: $5.80 -" block of text below... I have a bunch of text blocks similar to the one below, but they all have this kind of string to them ("price: $5.80 -")... Each text block has a 'price' and the end a '-' mark... Y at - it anyway to strip this line of each of my listings...
  
  M635
  Small ring Pull smooth w/back black patina
  Height: 1 3/16 "
  Width: 1 3/16 "
  "Projection: 1 3/16" 3/4 ".
  Base material: steel
  Screws: Screw Pack
  Price: $5,80-
  
  Thanks for the help!

  Discover the concept below code.

• I placed the text (no fill) over a picture box in InDesign, but when it prints the text has a white background, blocking the image.

  I placed the text (no fill) over a picture box in InDesign and it looks great on the screen. However, when I print the document, the text has a fill of white United behind him. Any suggestions as to what is happening?

  Thanks Peter.

  It seems that I had an outer glow effect turned on so that the 'text' (and not the object) and causing the text to be printed with a white background. Still don't understand why this would happen, but at least we have thought of it.