Removal of the network of virtual machines powered cards

Similar Questions

• "this host is not no matter what networks of virtual machine, or you don't have the permission to access ' ESXi V4

  I'm sure I'll be stupid on this one, but what does do to ensure that networks of virtual machine?  I get this message when I look at network/properties of a VM adapter 1.

  When the virtual computer runs, my network card think the cable is disconnected.

  I went to the host properties and of course there is a 'Virtual Machine port group"and a"VMKernel Port", both connected to my physical card.

  I don't see anything obvious on the network are disabled or anything like that.

  Please give me a hint?  Virtual machines to run it, but without any network connectivity.

  Thank you

  Joe

  I had this on the virtual machines that I moved from VMware Server 2.0. I found that there is no entry for the "ethernet0.networkName" in the .vmx files Server 2 (and probably Workstation) do not seem to care and connect ethernet0 to the first configured network. ESXi 4 all confused. So for me, the solution was to add

  ethernet0.networkName = 'Hand Lan'

  for each file .vmx before adding them for ESX. If you have already added the machine, you will need to remove it before you edit the .vmx file.

• Help please... Replaced the hard drive of MBP, restored from TM, but the Windows XP virtual machine does not start

  I replaced the 250 GB hard drive in my MacBook Pro early 2009 with a 500 GB drive, it the Mac OS extended (journaled) format and restored from my Time Machine backup.

  Now when I try to start my Windows XP virtual machine (using Fusion 2.0.6... planning upgrade to 3.1.2 but wanted to validate all was well first), I get BSOD, even in safe mode.

  I have my vm separately saved on a network drive data files based on things that I had read before, I do not think that TM backup of virtual machines. However, a friend with a similar setup with more knowledge I think because I could see my Windows XP vm VMWare listed under 'Documents' in Time Machine showing its full size, it has actually saved and there restore it. Apparently he has done this successfully before.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  TIA!

  Katie

  To be clear: you have restored VMs from the disk or network time Machine?  And if the network drive, what backup method you use?  (i.e.: have you just copied engine off the computer virtual package or not?)  Can you copy/restore the virtual machine to the network again drive?  What is a virtual machine that has the error, or other virtual machines have problems?

  Time Machine backup correctly a virtual power off machine. But since Time Machine works automatically, you often will get not a consistent backup unless you do some tricks to make sure Time Machine backup only when you use a virtual machine.  (i.e.: turn on Time Machine only when you're done with the virtual machine.)  Thus, it is normally recommended to exclude the virtual machines from Time Machine and use another method to back up virtual machines.  Your friend is lucky or is only backup virtual machines powered off.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  The Mac player Paritioning is unnecessary unless you use Boot Camp or have required another for the partition.

• The substitution of parameters of the device when the cloning of virtual machines?

  Hello

  I'm trying to find out how I can substitute the disk space for a HARD drive or the network for an adapter in the cloning of virtual machines.
  I thought it should be in the VirtualMachineCloneSpec, but it doesn't seem to be an option for him. I forgot something?

  Thanks in advance.

  So it turns out that the code was perfectly fine, the problem is that in my lab I have always tried setting disk space on something weaker than what it was before that does not work.

  Thought, after verification of the documentation for Set-disc hard, as I wanted reconstruct this cmdlet to see what he's doing: Set - hard - drive vSphere PowerCLI cmdlets reference

  Thanks again for your help

• Networking between virtual machines on different hosts

  Hello

  I need some advice on the basic approach to networking between virtual machines, each running on a different host machine.

  Consider the following configuration:

  I have a few processes that are running in a Machine virtual Ubuntu. Call this guest1.  I guest1 race inside a real computer running Windows XP SP3 and VMware Workstation 7.x; Call this host 1.

  I have a copy of this virtual machine that I put on another machine.  Call this Guest2.  I have Guest2 running on a separate physical computer, also runs Windows XP SP3 and VMware Workstation 7.x; Call this host 2.

  Now, I would like to guest1 and 2 comments to make networking with eachother.  I wish they were able to ping, SSH, etc., among others.

  This is where I am stuck. I tried setting the virtual machines to use the bridged network mode.  I tried to connect my router on each computer and manually assigning IP addresses to each host and each virtual computer.  When I do this, guest1 can Host1 and Host2 ping, but cannot ping Guest2 and vice versa.

  What is the right way to do this kind of network?  This seems like an obvious application, if you want to perform simulations on multiple virtual machines residing on different computers on the network.

  I apologize if this is the answer elsewhere, I had to dig and was not able to find the solution.

  Thanks in advance!

  Charles

  Guests must be on the same subnet, like 'real' hardware machines.

  1 when you copied the VM and then started, what did answer you the question of copy/move? (this determines if a new MAC address is applied)

  2 view each guest and ' ipconfig/all' results 'ifconfig - a' by the hosts.

  Lou

• removed from the network computers still will appear on the network map

  I have removed two computer laptop computers fom my network and removed in the network map.  They are no longer on the PREMISIS (sold).  Subtracting them to the magic of the network, I removed the network locking, set up as 'Follow-up as intruders' and they removed the network card.  I then reset the locking system.  When I bruing to the top of the map of the network, they are gone.  However, after a few minutes, as they appear again.  How can I remove them permanently from my network?

  Your network card is like showing wrong info. You can follow the steps on this link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=8571edab25b54432bfb7b7672a577b8f_19407.xml&pid=80&.... This is a guide for you refresh the service of the network magic software platform and then check if after doing the steps in the network card will always show the same information.

• Report on the ability of virtual machines VMware Cluster

  We started to evaluate Foglight for capacity planning and evaluation. One of the reports that I believe is interested in our leadership is the "ability of virtual machines VMware Cluster" report. I see that the report provides a value for the VMS remaining. I would like to learn a little more about this value and how is it calculated:

  1. What exactly a 'virtual machine' represents in these reports?
  2. Can a similar report to run using a specific type of server based on the allocation of resources or patterned after an existing VM wokload?

  We are a small, medium and large VM offering based on the allocation of resources. I would like to change the report to display the number of each type of virtual machine I have available... or pointer pointing to an existing virtual machine, and according to its resources and workload, determine how this server, I have available.

  It is based on the average size of the virtual machine in the cluster.  If you look at the dashboard of capacity management in the user interface, it can give you more details by cluster.  It is based on the average of the use of min/max/AVG across all virtual machines in a period given (usually 90 days).  This can not be changed today, but there is work to allow lets you specify a size of slot for something as small, medium, large, etc...

  This feature exists in the Foglight for virtualization, however Standard Edition.  It might be interesting to watch this, if you need it sooner.

• Report on the number of virtual machines by datastore

  Hello

  I use vFoglight 6.6.2. I try to have a report generated every week that contains the number of virtual machines running in the data store. But I don't know how to create a table of edge/report for these details.

  request for expert assistance.

  The following query gives you so all virtual machines on the specified data store

  Using the following mandatory input parameters:

  {VMWDatastore}: type foglight - 5:VMWDatastore

  Select objects of type Machine virtual VMware in parameter {VMWDatastore}

  root of {VMWDatastore} / virtualCenter/virtualMachineCollection/virtualMachines

  where:

  ({VMWDatastore} to /datastores and)

  (/ vmState/current/value is equal to "receiving")

  Like query UI setup will allow you to use it as a dashboard of entry.

  Try around with the request and let me know if this help.

  Best regards

  hEINER

• How to import the list of virtual machines to complete a table in a workflow

  When you run the followingworkflow/library/vCenter/batch/run a workflow on a selection of objects

  How import you a list of virtual machines to complete the table of virtual machines?

  At this moment we are manually by selecting the virtual machines and adding them to the table individually which is very tedious. We would simply import a list.

  There is a certain ways that you can do what you're trying to do, but from your description, it looks like a wrapper will work best.  I enclose a simple workflow that loads the table from a csv file.  There is no error checking going on, but it should help you get started and you can expand on it from there.

• How to count the number of virtual machines on an ESXi server via command line

  I want to know the number of virtual machines running on ESXi. What is the command so that it...?

  "vim - cmd vmsvc/getallvms"

  This order list of the early running of the ESXi Server virtual machine, but I want the number (integer)

  Help, please...

  Thank you

  M@RK! V

  Hello

  You can use the PowerCLI command to get a VM number:

  SE connect-VIServer-Server "ESXi host or vCenter server.

  (Get-VM-location 'ESXi host') .count

  Elodie

• The Clean Up Virtual Machine - Fusion 7.1.1 progress window size

  Having a place in Fusion upgrade 7.0.1 for 7.1.1 in the VMware Tools update and Mountain Lion, size parameters > general window that opens click the button Clean Up recommended at the bottom of the VM library extends horizontally at the edge of the screen of the monitor (27 '' LED Cinema Display (, Mac Pro 5.1) or beyond, so there to drag to the left to reach the Clean Up Virtual Machine button. This happens on all Windows virtual computer I tried on. I use merge for quite awhile (version 2 and later) and have never seen that happen before. Fortunately, it is on a backup test drive so my boot partition, always running 7.0.1 is unchanged.

  Any ideas on how to fix this would be appreciated.

  You have long strings in the Notes field? If so, this is a known bug with a fix coming - the format code OSX on 10.8 a of bugs that are fixed in later versions. By changing the text to be shorter, and then reopening the settings pane, you can work around it.

  If it isn't, please join or send me a screenshot.

• What is the open file Virtual Machine vCenter web console?

  What is the open file Virtual Machine vCenter web console?

  I have about 20 MV listed here and the rest under VMS.

  Thank you

  Dan

  Records are a method of setting permissions in VMware vCenter. They form a triage unit and behave as a logical separation. When you first add the hosts to vCenter and you have all the files, there will be a default folder created for you as Richardsonporto mentioned.

  Later, you can create new folders and separate the virtual machine by drag-and - drop of their.

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Definition of reserves on the running JAVA Virtual machines

  I recently came across an overview of VMware performance that had a page essentially recommending reservations memory setting for the running Java virtual machines (see table). We have Java environments and did not have performance problems or complaints so, I doubt that I would implement any changes. However, I am curious to know if it's even a better practical recommendation, I could not put the date on the document so I wanted to see if someone had updated or current information for vSphere 4.X, 5.X environments.

  In General, we only use reservations memory to avoid the overhead administrative and operational increased. If we have never not a necessity, I prefer to use reservations to pool resources rather than granular level VM reservations.

  In my opinion, if you use the reservations are a regularity no exception in your environment, then you can use these rules.  That said, if you don't have no problem, I wouldn't change anything.  I've also linked a new document below.

  http://www.VMware.com/files/PDF/Techpaper/Enterprise-Java-applications-on-VMware-best-practices-guide.PDF

• Create the list of virtual machines to exclude the script through .csv file?

  Hello

  I have a script that runs all day off hours to check my VMs respect some things, like having the option to 'VM tools upgrade policy' checked. The script will export a list of virtual machines that DO NOT have this option enabled and then later to fix the problem. Now, for some specific VMS, I don't want to have the option active and want to exclude them from this review. I try to add a list of these virtual machines I want to exclude from my check script of VMTools_UpgradePolicy via a .csv file containing their names. Here's what I have:

  ##############################################
  #VMTools update during the feeding cycle - report
  ##############################################
  function Report_VMTools_UpgradePolicy {}
  $list = import-Csv "C:\VMware\PowerCLI\Scripts\EXCLUDE LIST\EXCLUDE_vmtools_upgradepolicy.csv".
  foreach ($entry in $list) {$exclude = Get-VM-name $entry. Name}
  $vms = get - Vm | where {$_.} Name - not $exclude - and (Get-View-Id $_.) {ID). Config.Tools.ToolsUpgradePolicy - eq 'manual'} | Select name
  $vms | Export-Csv "C:\VMware\PowerCLI\Scripts\REPORTS\vmtools_upgradepolicy.csv" - NoTypeInformation
  }

  The content of the EXCLUDE_vmtools_upgradepolicy.csv is as follows:

  'Name '.
  "VM1.
  "VM2.

  "VM3.

  I try to get all the virtual machines in my environment who have the ToolsUpgradePolicy - eq 'manual' (unchecked), AND which do not match any of the names on my list of exclusions (VM1, VM2, VM3). My script so far will do what I want, except that only the last entry in my list of exclusions will take into account. VM1 and VM2 will still be reported as VMs that need to be addressed.

  I'm not sure that I am taking the right approach with this, I will continue to seek a solution for what I want, but any help would be appreciated! I prefer to make my list of exclusion to a separate file, for example "EXCLUDE_vmtools_upgradepolicy.csv", because I want that other administrators to be able to just open this .csv file and add virtual machines to this list without having to touch my scripts.

  Thank you!

  Vince

  Hi Vince,.

  It is like that I think because of your statement:

  foreach ($entry in $list) {$exclude = Get-VM-name $entry. Name} -> it
  $vms = get - Vm | where {$_.} Name - not $exclude - and (Get-View-Id $_.) {ID). Config.Tools.ToolsUpgradePolicy - eq 'manual'} | Select name
  $vms | Export-Csv "C:\VMware\PowerCLI\Scripts\REPORTS\vmtools_upgradepolicy.csv" - NoTypeInformation
  }

  $exclude is a variable that contains only 1 entry., that's why you see only the last element inside. It will not be an array.

  foreach ($entry in $list) {[string []]+ $exclude = Get-VM-name $entry.} Name}

  This will fill $exclude table with entries of string that will contain the names of virtual machine.

  And when you will be comparing. I think you should use

  where {$exclude - notcontains $_.} Name - and... the rest

  Kind regards

  Greg