Audio is cut off when the USB 3 G modem is connected

Similar Questions

• Computer runs slowly, and cut off when I watch or listen to the music or video

  My computer is HP Windows Vista - office computer.  My computer runs slowly, and cut off when I watch or listen to any video or music.  I tried restore, to restore all the drivers for the original version (but did not offer the video card) and all I could think to do.  My computer will not be completely updated anything - I think that my video card is bad.  What can I do?  inexpensive if possible preference.  Thank you!

  Hello Deedahday,

  Thanks for posting on the Community Forums of Microsoft Vista.

  This problem may occur because of many factors. Follow the steps below; It could help us solve the problem.

  Access the link below and follow the steps to optimize Windows Vista for better performance.
  http://windowshelp.Microsoft.com/Windows/en-us/help/83EC0FFE-EE04-4D53-8B87-25D1F05C954E1033.mspx

  Try to update display drivers:
  Try to access the computer manufacturer's website and select the model of your computer and download the latest drivers to screen for your computer and install the same.
  Access the link to download the drivers from the manufacturer of the computer: http://www.hp.com/#Support

  Also set the virtual memory of the system managed size:
  a. click the Start button and access control panel
  b. click on system and Maintenance
  c. click System.
  d. in the left pane, click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  e. on the Advanced tab, under performance, click settings.
  f. click on the Advanced tab, and then under virtual memory, click on change.
  g. Select 'Size of system managed' and click on Set.
  h. click on apply and Ok.

  Restart the computer and check if it works very well.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I put a site with 2 rectangles (one above the other) in the footer and is cut off when I write the site

  The depth of the rectangle is fine when I view in muse but only cuts off when published

  Hello

  It is because of the text in the middle of the rectangle box (in HAND Master page), please increase its width, and then try to preview.

  Please take a look at the screenshot. I have it increased by 311 px and his work form me.

  Please take a look at the screenshot for better understanding.

  

  Concerning

  Vivek

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to detect when the USB cable is plugged

  I used the USBPortListener to try to get an indication when the USB cable is plugged into the phone, and also when it is cut. The problem is that a single function never gets pulled, and that is 'getChannel', whenever I have data on the connection.

  Obviously, I must have been a misunderstanding on how to use this listener, but I woud take "wired" lights whenever the cable is plugged in, even with "disconnected".

  I think you want to use a system for this listener

• Satellite Pro M70 freezes everytime when the USB port is used

  Satellite Pro M70 (SPM76) crashes every time when the USB port is used.
  The mouse works, but external HD/Extarnal card sound/Memory stick causing the laptop to freeze. All the drivers are installed right, they are the most recent and have no trouble with other users.

  The devices are all compatible. Service pack 2 is installed, and all the hardware drivers on the toshiba have been updated... again, same problem.
  The toshiba is about 2 months old and have had this problem since I got it. First I thought it was the drvers, but I cleared of all (?) other options but the USB ports.

  Hello

  Believe me, that's not easy to say what the problem may be. It is important to see if the problem occurs because of hardware or software may be. I recommend you to backup all your data and reinstall the unit using rescue media. On this way the unit will be factory settings and will be clean preinstalled. Test your USB devices and see what happens.

  Try to use some standard like USB stick or external HARD disk parts, because in this case, you must not install any drivers please. If you use other devices like USB webcam with own software and drivers, it is possible that something goes wrong, but what. On this path, it is not possible to say.

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

  Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

  This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

  Help!

  The laptop is a year old.

  I already ran the diagonsitic battery and it said the battery was good.

  OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

  Here are the parameters:

  reserve battery level (this is when the popup will appear).

  10%

  low battery (this is when the low battery action will be performed).

  8%

  critical battery level (my computer would die at this point.)

  7%

  low battery action: sleep, sleep (this customize to your liking).

  battery low notification: on (hold on).

  critical battery action: sleep, sleep (my computer died already in criticism.)

• File Manager XP assigns a letter already in use when the USB flash drive is connected.

  On a Lenovo S10E with XP Version 5.1 (Build 2600.xpsp_sp3_gdr. 090804-1435: Service Pack 3) I have three virtual disks assigned to the files on the C drive.  3 drive letters are D, E & F.  When I plug a USB key, it appears in the file Mgr as 'removable disk (d)', but when you open it you get the file I originally assigned to D.  When you remove the USB key, Mgr of files will no longer display a drive D, but the initial allocation of virtual drive is still active and functional.

  If I plug in a USB CD/DVD drive instead of the flash player, it is correctly attributed the letter G.

  In comparison, on an IBM Thinkpad Z61t, with similar virtual drives defined, when the USB is connected it is assigned letter H (after the edge G CD/DVD drive).  The Z61t IBM has the same level of Windows XP is installed.

  On a Lenovo with Vista 6.0 T500 Thinkpad, the USB is also properly assigned, after all virtual disks.

  But I think I installed all available updates, I wonder if there is a fix or an upgrade for the Lenovo Netbook is going to fix this problem?

  With the USB drive connected, run Disk Management (start > run > diskmgmt.msc), click on the drive and change its drive letter.

• Monitor LG Flatron L245WP-BN is cut off at the top and has a black border at the bottom of the screen

  Monitor LG Flatron L245WP-BN is cut off at the top and has a black border at the bottom of the screen. Connected to HP laptop Pavilion via a HDMI cable. Is it possible to align the screen so the full screen is showing?

  Help, please!

  Thank you

  navers wrote:

  Sorry! It's a HP Pavilion 15 laptop. I can give you the number of the product if you want? Windows 64-bit of 8.1

  Thank you for the additional information.

  Yes, the product number would be helpful.  Please do not provide the serial number, however.

  I think that your problem is perhaps that the monitor is not compatible with Win 8.1.  The only available updates are for Win XP and Vista.  You can find this information in the link that I provided in the article titled "Software Update".

  I suggest you contact LG Customer Service to see if they can help you.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Accelerometer turns off when the screen is off

  When testing my application on a Z10 android port the accelerometer turns off when the screen is off. A partial wake lock does not turn the sensor back on. A wake dim screen lock is needed to re - turn on the detector. This behavior forces the screen to be all the time when an application requires the use of these sensors.

  An example would be a pedometer recording the steps throughout the day. In order to operate the screen must be turned on by the application that runs in the background. This will cause a fast draining of the battery and is not an acceptable solution.

  On Android, a partial wake lock is enough to keep the accelerometer running.

  I think this should be reported as a deficiency, a lot of motion carried since Android applications will be blocked by this and my app port is one of them.

  Tested on system Z10, model number STL100-3. Version of the 10.1.0.273 software

  The fix will appear in MR 10.2, 10.2.1 aka.

  I recently submitted a fix for the problem.

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif

  How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif file comes from a document by using the fax & Scan app scanner in Windows 10.  I am running Adobe Acrobat Reader DC, which I run with my subscription 'Adobe PDF package, monthly'.  It worked fine until about a month.  I've since upgraded to Windows 10 and Acrobat Reader DC.   I would be very grateful for any help. Eoghainn

  Hello

  This problem has been reported as a bug. Our team of engineers working on this priority issue.

  Kind regards
  Nicos