Removal of the NFS shares in the underlying filesystem FS7500

Similar Questions

• Cannot add the NFS share to store Cluster data

  Hello

  I have this scenario:

  Server - FREENAS with NFS share

  -cluster with 2 guests

  I added the NFS datastore successfully to each host in the cluster. The problem is when I try to add the NFS Datastore for the Cluster data store, I get the error: a specified poarameter was not correct. datastore.info.type.

  Any suggestions would be much appreciated.

  Thank you.

  Datastore1 and datastore2 data warehouses are data warehouses local? If so, you must remove these storages of data added before the NFS datatore to the cluster, first cause a cluster cannot be VMFS and NFS on the same cluster and second cause without making sense have warehouses of local data within a cluster data store.

• ESXi 5.0 servers don't recognize that same NFS share to the same data store

  I have a setup of vSphere 5.0 running VMware Workstation 8.  I have two ESXi servers that are accumulating the same NFS share (with the same IP address and the same directory path), but for some reason, they don't recognize it as the same data store.  I deleted and added to the data store again and checked that I am getting the same way on both nodes.  However, vSphere don't let me use the same name when I ride sharing NFS as a data store on the second node. vSphere changes the name of "NFSdatastore" to "NFSdatastore (1)" and will not let me change, say that the name already exists.

  The NFS file server is a VM of 2.99 OpenFiler, which IP 192.168.0.100 (and is in DNS as "openfiler1").  The path is "/ mnt/vsphere/vcs/datastore.

  The NFS mount works great as a data store on the two servers ESXi, except for the fact that vSphere sees two data stores.  I have a Red Hat VM running on each of them, and when I browse the data of each ESXi Server store, I can definitely see two configs VM, as well as a few ISO images that I put on the NFS share.  However, I can't vMotion as he complains about not being able to access the configuration file and the file virtual disk (vmdk) of the other node.

  On the OpenFiler, the directory/mnt/vsphere/vcs/datastore is the property of "ofguest" in the "ofguest" group, and the permissions are "drwxrwsrwx +".  All files under the directory are also held by "ofguest" in the group "ofguest".  Vmx files have permissions "rwxr-xr-x + ', and the vmdk files have permissions ' rw +-

  I did a lot of Google search, read best practices, etc.  Any help is appreciated.

  UPDATE: he Figured out - leakage / on one of the paths of NFS mounting.  DOH!

  Maybe this can help you:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005930

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005057

  Concerning

• Can't mount NFS share - operation failed, diagnostics report: failed to get the path console for volume

  I'm trying to mount a NFS on ESXI 6 volume, but continue to operate in the error.  Googling everything nothing helped, so I'm here. Error:

  Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.xx.xx' failed.

  Operation failed, the diagnostic report: failed to get the path of the console for the volume, the name of the sample.

  The NFS share is located on a synology nas. I checked the permissions and configuration. Everything seems correct based on the various boards and KB articles.

  Ideas?

  Thank you.

  Find the esx.conf file in/etc/vmware.

  If you could also share a copy with me...

  Try to mount the NFS VMware KB: Volume fails with the error: could not resolve the host name

  Check the link as well below.

  http://www.Bussink.ch/?p=1640

• NFS share for one (1) added when adding to a new host in the existing data center

  I'm sure it's a simple answer, but I've been beating my head on the wall, trying to find a solution. The scenario is as follows:

  1 Vcenter has several hosts in different groups. All built at the same time with a NFS share that is shared among all.

  2. I add a new host to the data center (I tried independently and also added to a cluster as well).

  3. the new host sees its local disk as a data store, as expected, but I have to add the shared NFS datastore.

  4. at the level of the host, I go to configuration-storage-add storage and the NFS share.

  It shows and normal with NFS (1) as the name. I can't rename it as it says THAT NFS already exist. I understand that there are in the vcenter DB, but how to add this new host or host an existing environment and maintain the name of the NFS share? vCenter 5.5, 5.5 esxi

  Thanks for your help

  Neil

  finally found the problem,

  the mounting data store I used FQDN.domain.com /Datashare

  I needed to use the FULL domain. DOMAIN.COM /Datashare

  Plugs in the name of area COMPLETE the variance in the symbolic name that caused the problem.

• What is the command to mount an NFS share?

  What is the command that allows to mount an NFS share from a host ESX 4.1?

  See page 59

  http://www.VMware.com/PDF/vSphere4/R41/vsp4_41_vcli_inst_script.PDF

• Cannot start a virtual machine from an ISO stored on the NFS share

  We have an NFS share on our Windows 2003 server to serve the ISOs for virtual machines

  However if we have attached an ISO to a virtual machine and configured to boot from it, it does not find the ISO, just attempts to boot from the network, but if copy us the ISO in a data store local it will start and install correctly.

  We set the NFS share for anonymous access on Windows Server, we tried with both read and write permissions, but still no luck

  Anyone can get an idea about this

  Thank you

  Kimble

  ESXi must connect to the NFS share with the root account.  You will have to map the root login to an account on the Windows Server.   You can see a sample of the instructions here - http://www.sohoadvisers.com/tutorials/vmware-esxi/connect-esxi-to-windows-nfs.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Possible to NFS share to the host and virtual machine?

  If I have a NAS with an NFS share present it to both my ESXi host and computer Windows 2003 virtual server at the same time?

  Yes, but you need client NFS on Windows or a storage with NFS and CIFS.

  André

• Is there a way to know why an add-on was removed from the Mozilla Add - ons ' "Web site?

  I've been happily using "ISBN Linker," an add-on that I have heard of a few different sites and installed on site 'Add-ons' Mozilla only months ago. " I went to the site today to install this add-on on a new computer, and I received the message that nothing could be recognized under that name. As far as I know, he has been entirely removed from the repository of the add-on (Google Cache shows still some remains of its existence).

  Is it possible to know why it was deleted? It is not that I want to discuss why it shouldn't be there, but rather than if it was just that he had not been updated, or maybe it was simply removed by the creator, I would take a shot to recreate the add-on and it re-submitting. If, however, it was deleted for some reason, I'd love to know to avoid problems!

  This add-on has never reviewed by Mozilla. Mozilla has recently tightened the rules for modules that appear on the site of modules. They have sent e-mails to the developers of add-on for any add-ons not revised, in order to inform them that if they wanted their add-on to stay on-site the modules they would need to ask that she will receive a security review. Those who have not requested that a security review was the Add-ons disabled so that it no longer appears on the site of modules. For more information, see http://blog.mozilla.com/addons/2011/02/17/sandboxed-add-ons-disabled-next-week/

• Can I use the Windows Media player this Adobe pirate intead? How, please? E-mail address is removed from the privacy *.

  Adobe Flash Player prevents me to display videos because I don't want to share my personal computer storage.

  Wholesale! constitutional question here! Can I use the Windows Media player this Adobe pirate intead? How, please? Or any other way to overcome this in-your-face PEST hijacker - Adobe Flash? * E-mail address is removed from the privacy *

  Hello

  Flash Player and Windows Media Player are not interchangeable.

  Like many things on the web, the Flash Player local storage can be put to bad use. This does not necessarily mean the Flash Player without scruples or bad product - it's the sites Web/people who abuse of this (depending on your point of view).

  You can configure Flash Player to block local storage on your computer. This does not necessarily all the features of Flash Player - for example with my set of Flash Player to block local storage I can still see videos on YouTube.

  The controls for the Flash Player local storage can be found here: *

  Start-> Control Panel-> Flash Player (32-bit) (Tab instorage )

  There is a good explanation of privacy and local storage of Flash Player here:

  http://help.adobe.com/en_US/FlashPlayer/LSM/WS6aa5ec234ff3f285139dc56112e3786b68c-7fff.html#WS6aa5ec234ff3f285139dc56112e3786b68c-7ffa .

  I hope this helps.

  * You have not stated your version of Windows, so it's Windows 7.

• When I send an email on Outlook Express, he won't out of the box shipping, but continues to send once a minute until I remove in the Outbox.

  When I send an email on Outlook Express, he won't out of the box shipping, but continues to send once a minute until I remove in the Outbox.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Serial cable using IrDA protocol does not work correctly. Steve Stephens, * address email is removed from the privacy *.

  The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.

  Appreciate any suggestions on how to solve this problem.

  Steve Stephens, * address email is removed from the privacy *.

  Hi, Steve Stephens.

  Did you run the fixit available in the link below?
  Hardware devices do not work or are not detected in Windows

  Method 1: Check for any error message in Device Manager

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Device Manager, find your device, and then double-click the device name.

  (d) If an error code has been generated, the code appears in the status area of the device under the general tab

  
  Method 2: download and install all available Windows Update

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 3: Download and install SP2

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• Please EXAMINE MY, MY IP ID AND SEND VERIFICATION CODE to MY EMAIL ADDRESS THAT IS * E-mail address is removed from the privacy *.

  Hi, I'm the real owner of the * address email is removed from the privacy * I know the secret code and my password but I do not use my secondary e-mail that is written on my info, so I can't get the verification code.  I just reset my password for 10. time I guess, but I can not connect. He said that my account is temporarily blocked.   It's probably the 20. time that I write in the forum (first of all here)

  I'm tired to write my problem several times...

  In short, it is the solution that should be made by you: study please me (Bank of the IP ID represents what you name it) and send the email address verification code * address email is removed from the privacy * so I can connect without problems.

  Please help me as soon as possible...

  I'm crazy for 5 days...

  I posted this on Windows Live solution center as a Windows live ID section but nobody helps me for 5 days...

  They all seem like they are robots. (they are just giving the links that I have overcome several times)

  Really give wages to sending links like bots?  Everything I know how employees think about their job because I have 30 under my command.

  I know the problem I know that the solution that they take effect only but no one... HELP ME AS SOON AS POSSIBLE PLEASE...

  I got this e-mail in order to recover * address email is removed from the privacy... *

  Where I put my complaint? Can I use my network and get in touch with Microsoft officials that I already know? or someone will solve my problem as soon as possible?

  Hi tolkiii,

  We cannot help with issues such as changing the alternative e-mail address without being able to connect to the Windows Live account.

  You must wait for a response from the Windows Live Solutions Center.

  Check out the link using Windows Live:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Refresh the screen after the removal of the UI elements

  Hello world

  I create a screen in which I use listfield to display data online as a way each line has a button Delete. I want to know how to refresh the screen after the deletion of data or a row of the screen?

  Because you actually using a HorizontalFieldManager to display each line, to remove it, you must remove the information in the underlying data store and then delete it HFM of his Manager.  That's it, removing the HFM will refresh the screen.

• Put automatically the laptop to sleep when removed from the base?

  Hello

  Many members of our society are using portable computers. However they all use docking stations when in the office. Nature from home they all simply press the eject button on the docking station and put the laptop in their bag. As you know that the laptop stays on since there is no action in the Power Options, simply what happens when "I close the lid.

  Some have killed cell phones in this process, it is recommended to put the computer to sleep manually start before removing from the dock menu and go about your day, but naturally not everyone follows this process.

  So is my question there a framework built in Windows 7 that will put the computer to sleep automatically in case the laptop lid is closed under power and is suddenly disconnected from the power?

  I have searched through ACPI configurations but came empty-handed.

  Any help would be appreciated!

  In addition, we are a boutique HP and use their cell phones of class business.

  I think that implementing standby when the lid is closed so that hip will probably solve it. Unfortunately I can't imagine a way to detect if it is not connected to the dock because as much as I know Windows doesn't support that.

  Apologies, I couldn't help-maybe someone knows if it is possible?