removal of VirTool:Win32/obfuscator.AFX / Obfuscator.XZ

Similar Questions

• Need to remove the VirTool:Win32/obfuscator.AFX virus / Obfuscator.XG on Windows Vista

  Original title: VirTool:Win32/obfuscator.AFX / Obfuscator.XG virus was detected on my computer and I can't remove it after several different scans. Help, please

  Hi the following virus on my computer. I tried several scans with no luck.  Please help: VirTool:Win32/obfuscator.AFX / Obfuscator.XG

  Hello
  If the advice above do not work, try following the steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
  Brian

• How can I get rid of VirTool:Win32/obfuscator.AFX / obfuscator.xg

  How can I get rid of VirTool:Win32/obfuscator.AFX / obfuscator.xg?

  Hi Thomas,
  If the advice above do not work, try following the steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It provides detailed instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• VirTool:Win32/obfuscator.AFX / Obfuscator.XZ and that it has been detected but not deleted... How can I get rid of him?

  I ran security Microsoft SCANNER and it says there: VirTool:Win32/obfuscator.AFX / Obfuscator.XZ and that it has been detected but not deleted... How can I get rid of him? I ran malwarebites and it sees nothing

  Hi winfrey,.

  ·         Which antivirus program is installed on the computer?

  I suggest that you download and install Microsoft Security Essentials to see if it helps.

  Anti-Malware, viruses, Spyware Protection | Microsoft Security Essentials

• microsoft security databases will remove VirTool:Win32/obfuscator.AFX / Obfuscator.ZN

  I ran microsoft security scanner, and he says that it has detected the virus of subject but it has not removed.  I have updated the security essentials and do run a full scan.  It will remove the virus of subject?

  Hello

  You will need to try and see if it deletes it.

  If he doen't, follow these tips.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• VirTool:Win32/obfuscator.AFX / State dedected

  I can't remove this tool found by microsoft satey sanner

  I removed my McAfee that does not show me this worm when I scanned my computer to install microsoft security essential and it did not work, I got the 0x4FF02 error code

  Now, I have a computer without AV and a worm, I can not get rid, what can I do?

  COMPAQ SR5414 Windows Vistia Home premium 2SP

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• How can I get rid of VirTool:Win32/obfuscator.AFX / Obfuscator.ZN

  I performed a security scan and it came back and said that he had found the virus indicated in the title. I immediately updated my microsoft security databases and configure it to run a scan complete. This will eliminate the virus of subject or is there something else I need to do?

  Duplicate thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/will-Microsoft-Security-Essentials-delete/3009ecea-bc9e-4C9B-91b3-c3a728533d6f

• eliminate como puedo VirTool:Win32/obfuscator.AFX El / Obfuscator.XZ

  HA avido a virus than an entrado por el facebook. bloqeo mi facebook todo, y bueno e used escaner pero el no lo ha could eliminate, the truth not to do.

  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx

• Essentials Microsoft win32/obfuscator.jk analysis and quarantine but keeps returning

  Original title: xp security 2013 keeps poping up

  resultsin a viris VirTool.win32/obfuscator.jk that microsoft essentials will analyze and quarintine but keeps coming back.

  Hello DonLewis71,

  Thanks for posting questions about Microsoft Community!

  You can read the following article to resolve the error 0 x 80070424:

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall

  http://support.Microsoft.com/kb/968002

  If you need further assistance, please answer and we will be happy to help you.

• How to remove the virus lives tool win32/obfuscator.c

  How to remove win32/obfuscator.c tool lives my panda anti virus wont even pick it upwards so can't remove it

  Hello

  I suggest you to try the steps below and check if it helps.

  Try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: When performing analysis on the hard drive if bad sectors are found on the disk hard when the parser attempts to repair this area if all available on which data can be lost.

  To get information about PANDA security I suggest that refer you to the link below.

  http://www.pandasecurity.com/USA/support/homeusers/

  Hope this information is useful.

• How to remove Trojan - Spy.Win32.Banker.aiw

  How to remove Trojan - Spy.Win32.Banker.aiw

  It's a false alarm or a Windows malware attachment in email (a common occurrence for most users of e-mail). No one can hurt you, and you don't need to do anything. Just do not pass to someone else.

  You have no need to do is get rid of the software "anti-virus" (AV). All these software are worse than useless.

  Malware Windows is so widespread that you must assume that it is in each attachment until proof to the contrary. If you are just curious to know if a file is recognized as malware by the AV engines, you can download it from the "VirusTotal" site, where it will be tested against most of them. I do not recommend doing this with a file that may contain private information. A negative result is no evidence of anything either, because the AV software is not reliable.

  Never leave any AV software remove or 'quarantine' send messages or attachments. This will damage the messaging database.

• How to completely remove the trojan: win32/bamital for my computer, he says: it is partially removed

  How to completely remove the trojan: win32/bamital for my computer, he says: it is partially removed

  Hello
  1. where did you get the message saying that it is partially removed?
  2. what operating system is installed on your computer?
  3. what version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can run Microsoft Safety Scanner from the link below.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-GB/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  You can also ask your question here:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning

• How to remove the Exploit: Win32 / CVE-2010-3336

  Original title: Exploit: Win32 / CVE-2010-3336

  Does anyone know how to remove the Exploit: Win32 / CVE-2010-3336?

  Hi Bob,

  This may be due to malicious software or viruses on the computer.

  You have security software installed on the computer?

  If you have installed security software, I suggest you run a security scan and check if it helps to remove malicious software.

  In addition, you can also run Microsoft safety scanner to search for infected files.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  See the link to download and run the Analyzer:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please let us know if the problem still persists. We will be happy to help you.

• I want to remover for (worm:Win32/vobfus.MD / Ainslot.D)

  I want to remover for (worm:Win32/vobfus.MD / Ainslot.D)

  How to use Malwarebytes¡¯Anti-Malware virus remove worm:Win32/vobfus.MD / Ainslot.A (Microsoft)

  Step 1: Download Malwarebytes Anti-Malware, from the following download link and save it to your computer:

  Download Malwarebytes Anti-Malware link
  (it will open a new window)

  Step 2: Once downloaded, exit all applications and windows on your PC, including this one.

  Step 3: Double-click on mbam - setup.exe on your desktop. This will start the installation of MBAM on your PC.

  Step 4: When the installation begins, follow the installation guide to complete the installation process. Do not change its settings by default and when the software finished installing, make sure that you let the update Malwarebytes Anti-Malware and launch Malwarebytes Anti-Malware checked. Then click on the Finish button.

  Step 5: Malwarebytes Anti-Malware will now automatically start and you will see a window saying that you must update the database before performing a scan. As Malwarebytes Anti-Malware will automatically update after the installation, you can press the OK button to close that box and you will now be in the main application, as shown below.

  

  Step 6: On the interface of the Scanner, make sure that the Perform full scan option is selected and then click on the Scan button to start scanning your computer for viruses.

  Step 7: Malwarebytes Anti-Malware will now start to scan your PC for malware. This process may take a few minutes, you can go and do something else and check the process of the analysis later. When Malwarebytes Anti-Malware analysis it will look as below.

  

  Step 8: When the scan is completed, a window will appear as below.

  

  You must click the OK button to close the message box and continue the process of suppression.

  Step 9: You return to the main scanning interface. And then you must click on the button display the result.

  Step 10: A screen showing all the viruses that Malwarebytes Anti-Malware found is displayed. Then you must click the button remove selected to remove all of the selected virus. Malwarebytes Anti-Malware will remove all files and viruses registry keys and add them to the quarantine of software. When you remove viruses, Malwarebytes Anti-Malware may require a restart in order to remove all the. If there is a message saying it needs to restart, click OK. Once your PC has rebooted, and logged in, please continue with the rest of the steps.

  Step 11: When Malwarebytes Anti-Malware has finished remove the virus, it will open the scan log and display it in Notepad. Review and save the log, if you want, and then close Notepad.

• removal of trojan:win32 / alureon.fo

  How can I remove the trojan:win32 / alureon.fo of my computer it crashes all the time and this is the only problem I can find after scanning the computer

  Hello

  This should help you.

  "How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?"

  http://support.Kaspersky.com/FAQ/?QID=208280684

  'How remove Google redirect TDSS, TDL3 or Alureon rootkit using TDSSKiller'

  http://www.bleepingcomputer.com/virus-removal/remove-TDSS-tdl3-Alureon-rootkit-using-TDSSKiller

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Also, follow these steps to remove other malware.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.