Remove a chassis action

Similar Questions

• How can I remove the last action in my story in Lightroom 5

  I want to remove the last action of my story. I know that Ctrl Z is back, but the action is still there

  Hey Vic,

  Please follow the below items for the same.

  Adobe Photoshop Lightroom 4 * cancel the setting of the image

  When to use Reset and history to undo your Lightroom develop work | Lightroom training Laura shoe, tutorials and tips

  Kind regards

  ~ Mohit

• Failed to open the centre or on Add/Remove programs of action

  I have Windows 7 and I am having serious problems with my laptop. When I try to open my action center to view my message, it keeps giving me an error. It says Windows Explorer stopped working suddenly and then appears an error message that says: the instruction at 0xfb40317c referenced memory at 0x05020b0c. The memory could not be read. Click on ok to terminate the program. When I try to access my control panel in order to achieve the application to add/remove programs, I get the same message about Windows Explorer suddenly stopped working and then another pop error message that says: the instruction at 0xfb403187 referenced memory at 0x000001bd. The memory could not be written. Click on ok to terminate the program. I'm not sure at all what that means and I don't know how to fix the problem either. Could someone help me please? I would be very grateful. I use this computer for my studies and it is interfering with my school work. I'm about three-quarters of his studies and got my partner, and I don't want that's the reason to explain why I can't finish. Please someone help me. Thank you very much.

  Tabitha Caudill

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  (2) run the command SFC /SCANNOW. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• Remove the default actions

  Is it possible to not have a slew of default actions during start-up in CS5? I see only one of the options in the menu dropdown is Delete, but I don't necessarily want to delete them forever, but not load automatically.

  Thank you

  David

  The file will still exist on the disk.  So just delete the actions you don't use the current set, then reload them as needed.

  BTW - the default values are not this set a lot, so most probably you have loaded actions of your choice and do not them removed the current.

• Remove point default action of webview on long press

  Hi all

  I use WebView to view images in ListView. In the present, I use multselect do some action on LongPress on a particular image (WebView). But it shows webView point default action save, share and select other.

  And by clicking on select more, show my own point action.

  If I want to delete the action item default who are appearing for the first time, means that when I use longpress it show that my own actionitem.

  Please suggest any suggestion for this.

  Thanks in advance.

  Use on your WebView code below...

  WebView {}
  touchPropagationMode:TouchPropagationMode.None
  }

• Remove the chassis decomission fails

  

  Is there a way I can 'kill' the WSF process so I can get passed to this instance?

  Robert,

  Welcome to the community!

  You hit the following bug: CSCul17331 and you will need to pass the cables of the IOM to other ports in the FI, unfortunately the chassis finds with a new ID and old ID will remain always in UCSM for a ghost chassis but the fix for this bug in the 2.2 which should be released this quarter (but this date could change at any time (, with no further notice).

  Let us know if this workaround is useful.

  Note THE answers useful.

  -Kenny

• Remove steps from the action recorder

  I used ESP to record a sequence which involved scroll down a list, click English UK under the spell, check the language in Windows Live Mail.  However, ESP made a multitude of steps for the scrolling action.  It would have been nice to be able to suspend the recorder until I got to the language, and then I wanted to continue.

  Therefore, it is possible to remove certain steps in the saved file?  Otherwise, it would be a very good tool.  You can also join 2 files RDP would work just as well.

  Thanks for any help.

  Hello

  Unfortunately, there is no option to remove steps from action recorder recorded file or to join the RDP files.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I HAVE 2 EMAIL ACCOUNTS, I WOULD LIKE TO REMOVE A

  I HAVE 2 EMAIL THUNDERBIRD ACCOUNTS IN MY NAME AND ON BEHALF OF MY WIFE AS SHE NOW HAS IPAD
  I WOULD LIKE TO NO LONGER RECEIVE HIS MAIL AND THEREFORE TO DELETE THE ACCOUNT ON MY LAPTOP

  your wife has none of the emails stored on your computer?
  If she has an IMAP e-mail account, no worries as emails will always be on the server.
  Otherwise save e-mails before deleting the account.

  To remove an email account:
  Tools > accounts settings
  or on mail account folders in the pane and select "settings".

  Select the e-mail account that you want to remove
  Click on "Actions account."
  Select 'delete account '.
  Click OK
  See the image below as an aid.

• I have a 1062 q chassis that runs 15 deg Celsius warmer than another chassis in the same system

  I have two 1062 q rack-mounted chassis and a running 10-15 degrees hotter than the other.  I all the filler panels and have removed the chassis on the grid for the outdoors.  I still see a difference in important temperature even when the chassis is open air.  No code works and that the system is just turned on.  I use system monitor OR gather temperatures for admission.  The normal chassis has all the slots filled with modules.  Abnormal frame has 3 open slots that are covered with panels of filling.  I have cleaned the filter, checked the operation of the fan, and the fan speed is and has always been the HIGH value.  Has anyone seen this problem before?  The power supply into the chassis begins to fail?

  The culprit seems to have been a fine layer of dust accumulation in the sector of fan photographs where the sensor is located.  I removed and cleaned the filters, but has decided to remove the power module and check its status.  Until I reinstalled it, I rubbed the area with alcohol and removed a small accumulation.  Then I reinstalled the chassis in the rack and left the grid power off for 5 days in order to get all of the chassis at room temperature.  I then powered the rack and run a RF TX/RX program for 6 days.  Both chassis have maintained a constant temperature during 6 days.  Our previous service interval was 90 days, but I have reduced that to 30 days, because our work environment is very dusty.

• Removal handle NI-SMU-1075

  Hello

  I have a NI SMU-1075 chassis that needs to go in a rack temporarily.  There is a handle that allows you to pick the thing up and carry it on the side.  I can't, for the life of me, understand how to remove the handle without having to take part the whole chassis (something I would avoid because the equipment isn't me).  I googled this and found sparse information about the subject...

  Thoughts?  Advice?  Points of view?

  Hi RS_233.

  The handle can be removed without removing the chassis.  There are two bolts phillips head as the bolt on the side of the chassis that anchors on each side of the handle.  They are accessible by removing the black access plug that covers the handle anchor.  Use a screwdriver to remove the black cap, taking care not to scratch the frame.  See the image below for a representation Visual of what I'm talking about.

  

  After removing the black cap access, you can unscrew and remove the anchor.  I hope this helps!

• How to remove page ActionItem

  Consider the following QML:

  Page {
     actions: [      ActionItem { id: action1 }   ]}
  

  I have (QML) how to remove the toolbar Action plan1?

  The action1.visible property does not exist.

  I suppose that if I could get in some sort of reference to the ActionSet of stocks in the ActionBar I could just call the function actionSet.remove (index) but I can't seem to be able to get to the ActionSet for items on the action bar?

  It is an easy task:

  on the Page that you say

  addAction (action1)

  removeAction (action1) or

• Alerts are LOST somewhere in the phase of substitution of Action...

  I have very, very strange statistics on my sensor. I deleted it a few minutes ago, and now it is as follows:

  Preliminary statistics SigEvent

  Number of dings = 60

  Number of alerts used by AlertInterval = 0

  Number of alerts used by number of events = 0

  Number of alerts first FireOnce = 0

  Number of alerts intermediate FireOnce = 0

  Number of summary first alerts = 8

  Number of intermediate alerts summarized = 43

  Number of regular summaries Final alerts = 8

  Number of overall summaries Final alerts = 0

  Number of Active SigEventDataNodes = 10

  Number of output for further processing alerts = 60

  SigEvent Action Override statistical Stadium

  Number of alerts received by the processor to replace action = 60

  Number of alerts where a substitution has been applied = 0

  Added actions

  deny-attacker-inline = 0

  deny-attacker-victim-pair-inline = 0

  deny-attacker-service-pair-inline = 0

  deny connection inline = 0

  deny package inline = 0

  change package inline = 0

  Journal-attacker-package = 0

  Journal-pair-package = 0

  Journal-victim-package = 0

  products-alert = 0

  products-verbose-alert = 0

  connection block request = 0

  request-block-host = 0

  request-snmp-trap = 0

  connection-tcp reset = 0

  request-rate-limit = 0

  SigEvent Action filter statistics course

  Number of alerts received by the processor of Filter Action = 0

  Number of alerts where action has been filtered = 0

  Number of filter line is = 0

  Number of filter line is causing a decrease in DenyPercentage = 0

  Filtered shares

  deny-attacker-inline = 0

  deny-attacker-victim-pair-inline = 0

  deny-attacker-service-pair-inline = 0

  deny connection inline = 0

  deny package inline = 0

  change package inline = 0

  Journal-attacker-package = 0

  Journal-pair-package = 0

  Journal-victim-package = 0

  products-alert = 0

  products-verbose-alert = 0

  connection block request = 0

  request-block-host = 0

  request-snmp-trap = 0

  connection-tcp reset = 0

  request-rate-limit = 0

  SigEvent Action handling statistical stage.

  Number of alerts received by the processor of manipulation of Action = 1

  Number of alerts where was forced to produceAlert = 0

  Number of alerts where produceAlert was off = 0

  Actions performed

  deny-attacker-inline = 0

  deny-attacker-victim-pair-inline = 0

  deny-attacker-service-pair-inline = 0

  deny connection inline = 0

  deny package inline = 0

  change package inline = 0

  Journal-attacker-package = 0

  Journal-pair-package = 0

  Journal-victim-package = 0

  products-alert = 1

  products-verbose-alert = 0

  connection block request = 0

  request-block-host = 0

  request-snmp-trap = 0

  connection-tcp reset = 0

  request-rate-limit = 0

  County of SigEvent by Signature since reset

  GIS 60000.0 = 1

  Yes, unique signature shot, but of the "preliminary stage alerts', there were 60! What happened to the other 59 alerts?

  Only when the alert is at least an action to it passed to the action handler.

  59 other alerts did so not any event of action. No action has been added directly from the definition of signature, or type of alert actions have been removed because of the data reduction actions have been removed by filters.

  There are several signatures that are intentionally created without actions. These signatures are what we call meta element signatures. Themselves they don't mean much and so we remove all actions and that they don't generate alerts in the eventstore. They trigger internally at sensorApp but not this written in the eventstore. These alerts are controlled internally by signatures of Meta. When several component signatures are triggered, then a Meta signature can trigger and it's the Meta signature which would have an action products-alert event and be written in the eventStore.

  With the summary of the signature has a products-alert action, but the summarizer routines see if the signature fires several times with the same addresses. The synthesis tool thanks to an alert on the first release. Triggers later with the same set of address will result Summarizer automatically remove products-alert action (and other alert causing actions). If summarized alerts get written to the eventStore.

  NOTE: In your output, this happened at least 43 of these alerts.

  The filters can also be corresponding alerts and filters can be remove the event actions.

  So if the actions of the event have all be deleted (or none have ever been added), then the alert will not be passed to the action handler.

  In the output only 1 of the 60 alerts wound up with all the actions that need to be executed.

• How do I move the UCS with OS blade on the local disks between chassis

  Hello

  I have to move the blade between chassis - blade have OS installed on local disks and Associates profile.

  I can simply:

  Shutdown

  Enter the maintenance

  remove the chassis

  Exchange with other blades of the second chassis

  power on

  Blade are properly recognised and profile will go with it?

  I found Advisor here it is best to unassign blade profile and partner back after removal:

  https://supportforums.Cisco.com/discussion/11230671/physically-move-Blad...

  but it seems too complex for me - if someone who tired of this exercise can share some experiences?

  See you soon

  Hello

  Assuming the frame belong to the same domain (even pair of fabric for interconnection) and you are using ESXi, try the following:

  1 - Enter the host in maintenance mode (it can be move virtual machines to another server/power them off / take them into so maintenance mode)

  2. cut the blade

  3. ensure that the Service profile does not have a disc of scrub policy so that data is not deleted when the profile Service (SP) is ungrouped

  4 separate the SP

  5 decommissioning of the blade

  6 - Remove the blade and insert the new blade

  7. move the second chassis original blade

  8 - though the blade and an associate of the same/original SP

  9 powers on the blade

  10. take the server out of maintenance mode. as well as virtual machines

  Note: For the blade inserted in the drive, that we released our blade, you can create a new SP and pair with it or you can actually have any MS (including that attributed to the recently released blade) and assign it to the new blade.

  A single SP by sever and that one server per SP.

  SPs are independent from the hardware (as long as the material is compatible with the functions set up by the PS)

  Let me know if this info has helped, if not let me know and I wil expand or try to make your job easier.

  Please note ALL useful answers

  -Kenny

• Remove timecode file name when you use "save image as."

  I take a lot of screenshots of AE, but I always remove the timecode (0-00-00-00) file name before saving the image.

  In any case I can disable it?

  Thank you!

  I just checked CC 2015 and to your right. It does not remove the chassis model numbers if you return a sequence. I thought I remembered this work in earlier versions. It may be a good feature request.

  The other option is to save the model as a layered PSD. There is no keyboard shortcut for this, but you won't get the chassis numbers. You can then use Lightroom or bridge to batch your psd to png.

• Err: Could not read the file action

  Running Acrobat Pro of XI on Win7.

  Two stocks on the part of the Action Wizard, generate err pop up when I click on them. Path, cited in the error message is in Program Files (x 86) \... \ENU directory.

  Two of them are trying to read the file .sequ same, but have different description text showing.

  At one point, I had copied existing files in sequence, using them to edit and create mine, I then imported into Acrobat.

  Acrobat displays to manage Actions, but delete is dimmed; probably because what they resemble somehow action out-of-box.

  Even if I temporarily MOVE all files .sequ to \ENU directory and appdata files, they ALL actions always show on the Actions pane, and these two may not always be deleted.

  How to removed portion entered component shares of the wizard?  -or-

  How to reset installation - preference only the part of it that involves the .sequ files?

  Thank you

  Dave

  Hi DrDaveJ,

  Open Acrobat XI, go to the Help menu and repair the installation.

  Make sure that Acrobat XI is updated to 11.0.13 version, you can check for updates under the Help menu, if any please install.

  Now, try to remove the create action. Refer to this KB document to handle the Action Wizard Acrobat help. Wizard action.

  Kind regards
  Nicos