Remove a remote host from monitoring Infrastructure

Similar Questions

• Problems connecting to the remote host via FTP from DreamWeaver

  I have problems to connect to my remote host in DreamWeaver.  I can connect via the Client File Zilla and was able to connect until my hard drive crashed.  Now w/new drive, I get an error msg. I tried to create a new site, which connets when I test the connection, but when I go to view the files, a dialog box appears saying "(cannont get info dossier distant, accès refusé, etc) I tried selecting the different settings and combines following parameters: use firewall, secure ftp, ftp passive mode." Don't know what else to try at this point. I have WIN XP, Adobe Creative Suite CS3.  I'd appreciate any help, thanks!

  OK - it's good. I noticed that your host directory contains only the character ' / ' and that could be the source of your problems.  What happens if you remove that, just leave this field blank?

• Remote host IP SLA ping by tunnel VPN with NAT

  Hi all

  I did some research here, but don't drop on similar issues. I'm sure that what I want is not possible, but I want to make sure.

  I want to monitor a remote host on the other side a VPN. The local endpoint is my ASA.

  The local INSIDE_LAN traffic is NATted to 10.19.124.1 before entering the VPN tunnel.

  Interesting VPN traffic used ACL card crypto:

  access-list 1 permit line ACL_TUNNELED_TO_REMOTE extended ip host 10.19.124.1 192.168.1.0 255.255.255.0

  NAT rules:

  Global (OUTSIDE) 2 10.19.124.1 mask 255.255.255.255 subnet

  NAT (INSIDE_LAN) 2-list of access ACL_NAT_TO_REMOTE

  NAT ACL

  access-list 1 permit line ACL_NAT_TO_REMOTE extended ip 172.19.126.32 255.255.255.224 192.168.1.0 255.255.255.0

  This configuration works very well for traffic from hosts in 172.19.126.32 255.255.255.224 is 192.168.1.0 255.255.255.0.

  However, I like to use "ip sla" on the SAA itself to monitor a remote host with icmp ping 192.168.1.0. This would imply NATting one IP on the ASA to 10.19.124.1, but I do not see how to do this. None of the interfaces on the SAA are logical, to use as a source for this interface.

  Thanks for ideas and comments.

  Concerning

  You are absolutely right, that unfortunately you won't able to NAT interface ASA IP address. NAT works for traffic passing by the ASA, don't not came from the SAA itself.

• Unable to connect to the MKS: the certificate of the remote host has these problems:

  Hello

  We have a host of ESXi 4 cluster running any vSphere 4.1.  Recently, I started to upgrade to update 2 and all the additional fixes.  After the upgrade of the vCentre server to the latest version (or maybe before I can't noticed) an of are hosts began to show the following error whenever I tried to connect to the console of any guest on this host.

  Unable to connect to the MKS: the certificate of the remote host has these problems:

  It lists any problems at all and no error display in the event log that it simply does not work.  I had a prod around the internet and found nothing.  I then rebuilt the host to exclude and the problem remains.

  Any help would be much appreciated.

  Thanks in advance

  David

  If you can connect to the Console remotely using VMware Infrastructure (VI) Client connected directly to the host, take a look at vmware KB to connect to a remote virtual machine fails with the error: the certificate of the remote host has these problems

  but more generally - remove host to vCenter inventory and then add the host to the back, take a look at opening in the console of the virtual machine after a new installation of ESXi or ESX fails with the error: the host certificate chain is not complete and could not connect to the MKS: the certificate of the remote host has these problems

• cannot remove vMA ESX hosts

  I added a few guests of the vMA and activate the newspaper collection.  It collects logs for the hosts with success.  I don't want to follow these with the vMA hosts more because they are in a remote location and that it would implement a vMA at the remote location.  I use the sudo vifp removeserver servername command to remove the ESX host and they are eliminated as appropriate.  I run the vifp order mailing lists and they appear more more.  The thing is that the newspaper collection is still happening against the machines on the vMA.  I'll look in the directory/var/log/vmware and the directory for the ESX host, I deleted is still there.  I removed the directory and they immediately come with newspapers.  I'm going to rerun the command to remove the host and he says that they are already removed.

  How get rid you of the machines out of the vMA?

  You must use vilogger to disable the first control, and then remove the targets of vMA. Looks like vilogger works regardless of what VMAs think its management.

  If you have removed the targets of MAS... should not be able to connect to your targets from a distance. Are you sure that the log data is always transferred or is it simply a directory being created?

  There is a local credstore that is stored in the home directory of vi-admin /home/vi-admin/.vmware/credstore, perhaps you may need to disable it (make a backup first and move or rename)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• An existing connection to be closed by the remote host.

  Since last week, I can't keep a connection to the server of vatsim or acars for virtual pilots micro flight simulator will for more than five minutes. the error message is that an existing connection had to be closed by the remote host

  not an expert of anymeans and all the answers I got on the net are well above my paygrade.

  Hi dva8377,

  Here are two additional methods you can try.

  1: Restart the computer by using a clean boot of the method

   

  When you start Microsoft Windows, other software may start with the operating system. These programs may include antivirus software and system programs that may interfere with the game. When you perform a clean restart procedure, you prevent these programs from starting automatically.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Method 2: Bypass the router

   

  If you connect to the Internet using a router, there may be a problem with the configuration settings, which requires that the updated settings. To determine if a network connectivity problem is caused by a bad configuration or a problem affecting the router, try bypassing the router by connecting your computer directly to the modem. Remember that this test will only check that the router is configured correctly. If the game connects to the Internet without problem when you bypass the router, plug the router immediately and contact the manufacturer of the router or your ISP for help configure the router correctly.

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  For more information, see: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

  GANYMEDE + configured on the router and the router is in ACS.  I can ping from the ACS, but the router cannot establish a connection to authenticate users.

  AAA server Ganymede group + hq_acs-1

  Server 10.20.17.2

  Ganymede IP source-interface GigabitEthernet0/0

  !

  AAA authentication login default group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local

  AAA authorization commands by default group Ganymede + local 10

  AAA authorization commands 15 default group Ganymede + local

  nested AAA accounting

  AAA accounting newinfo periodic update 60

  AAA accounting auth-proxy default start-stop Ganymede group.

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting network default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  AAA accounting resource by default start-stop Ganymede group.

  BigTree_3945 #sh ip int br

  Interface IP-Address OK? Method State Protocol

  GigabitEthernet0/0 10.4.3.1 YES NVRAM low low

  GigabitEthernet0/1 10.12.10.26 YES NVRAM up up

  Serial0/2/0 unassigned YES NVRAM low low

  Serial0/2/0.602 10.12.15.10 YES NVRAM low low

  11:08:13.673 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:13.673 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:13.675 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:13.675 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:13.675 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:18.676 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:18.676 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:18.676 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:25.834 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:25.834 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:25.834 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:25.834 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:25.834 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:30.836 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:30.836 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:30.836 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:43.689 Apr 13: TAC: using default Ganymede groups ' Ganymede"list."

  11:08:43.689 Apr 13: TAC +: opening TCP/IP 10.20.17.2/49 Timeout = 5

  11:08:51.057 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:51.057 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:51.057 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:51.057 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:51.057 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:54.692 Apr 13: TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

  11:08:54.692 Apr 13: MORE: Queuing AAA accounting request treatment 76

  11:08:54.692 Apr 13: MORE: treatment of the accounting application id 76

  11:08:54.692 Apr 13: MORE: sending AV task_id = 332

  11:08:54.692 Apr 13: MORE: sending AV timezone = EDT

  11:08:54.692 Apr 13: MORE: AV = shell shipping service

  11:08:54.692 Apr 13: MORE: sending AV start_time = 1334329734

  11:08:54.692 Apr 13: MORE: sending AV priv-lvl = 15

  11:08:54.692 Apr 13: MORE: sending AV cmd = show logging

  11:08:54.692 Apr 13: MORE: request for accounts created for 76 (n20j03t)

  11:08:54.692 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:54.692 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: started 5 sec timeout

  11:08:56.058 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:56.058 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:56.058 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired

  11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired, cleaning

  11:08:59.693 Apr 13: 1/HIGHER (0000004C) / 20FD90EC: the package of treatment response

  BigTree_3945 #.

  The AAA Client IP address	10.4.3. * 10.12.15.10
  Key
  Group of network devices	Test NJT AccessLink (Not assigned)
  Authenticate using	GANYMEDE + (Cisco IOS) RADIUS (Cisco Aironet) RADIUS (Cisco BBSM) RADIUS (Cisco IOS/PIX) RADIUS (Cisco VPN 3000) RADIUS (Cisco VPN 5000) RADIUS (IETF) RADIUS (Mount) RADIUS (Juniper) RADIUS (Nortel) RADIUS (Sepi)
  Connect GANYMEDE + single AAA Client (stop recording in accounting in case of failure).

  The 10.12.10. range * is listed under the HQ site.

  Your help is greatly appreciated.

  You said that you can ping the router ACS, have you tried the GigabitEthernet 0/0 interface packages (that is those THAT GANYMEDE + will attempt to use, given the configuration you have posted) supply?

  What is the network path between the router and look like ACS (IE, a firewall, NAT, etc.)?

  Can you connect to port 49 to the IP address of the router GBA, GigabitEthernet 0/0 of supply packages?

  Using VRF?

  Which version of IOS?

• Existing connection had to be closed by the remote host

  Need help with this error
  I have a dev and a uat environment.
  I have a small form that I use as a method to call a web service. Essentially, the form contains a web service URL text box.
  If I call the shape on the dev and pointer to the service web dev, it works.
  If I use the form on uat and point the service web uat it works.
  If I use the form on UAT and call the web service on dev, it works.
  However, if I use the form on the dev and point the web service uat I get this error:

  In the Application Server error ' / '. An existing connection was to be closed by the remote host Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.

  Exception details: System.Net.Sockets.SocketException: An existing connection was to be closed by the remote host

  Source error:

  The source code that generated this unhandled exception can only be shown when compiled in debug mode. To do this, follow one of the below steps, then request the URL: 1. Add a "Debug = true" directive at the top of the file that generated the error. Example: <%@ Page Language="C#" Debug="true" %> or: (2) add the following section to the configuration file of your application:                 Note that this second technique, all the files in an application to be compiled in debug mode. The first technique will make only this file to be compiled in debug mode. Important: Running applications in debug mode causes a memory/performance load. You must ensure that an application has debugging disabled before deploying to the production scenario.

  Stack trace:

  [(0 x 2746) SocketException: an existing connection was to be closed by the remote host] System.Net.Sockets.Socket.Receive (Byte [] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) + 73 System.Net.Sockets.NetworkStream.Read (Byte [] buffer, Int32 offset, Int32 size) 131 [IOException: unable to read data from the transport connection: an existing connection was to be closed by the remote host.] System.Net.Sockets.NetworkStream.Read (Byte [] buffer, Int32 offset, Int32 size) + 294 System.Net.PooledStream.Read (Byte [] buffer, Int32 offset, Int32 size) + 26 System.Net.Connection.SyncRead (request of HttpWebRequest, Boolean userRetrievedStream, Boolean probeRead) + 297 [WebException: the underlying connection was closed: an unexpected error occurred during the reception.] System.Net.HttpWebRequest.GetResponse () + 5399741 _Default.btnTestUpload_Click (Object sender, EventArgs e) + 532 System.Web.UI.WebControls.Button.OnClick (EventArgs e) 111 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) + 110 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent (String eventArgument) + 10 System.Web.UI.Page.RaisePostBackEvent (IPostBackEventHandler sourceControl, String eventArgument) + 13 System.Web.UI.Page.RaisePostBackEvent (NameValueCollection postData) + 36 System.Web.UI.Page.ProcessRequestMain (includeStagesBeforeAsyncPoint, Boolean, Boolean includeStagesAfterAsyncPoint) 1565

  Version information: Microsoft .NET Framework Version: 2.0.50727.4234; ASP.NET Version: 2.0.50727.4223

  Any ideas?

  Hello

  I suggest you for this post in the appropriate section of the form of MSDN

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• How to upgrade an ESXi host from the command line

  Sorry for bumping an old thread. I'm new to ESXi. I'm under ESXi 5.5 build 1331820 and I am at a loss how to apply patches.

  Preferably, I would like to apply all the relevant patches through console (SSH). Can someone give me pointers how to do this? Thank you

  Moderator note (a.p.): branched to a new discussion of software patch to version 1331820?

  Welcome to the community,

  on how to patch a ESXi host from the command line, please see for example http://kb.vmware.com/kb/2008939

  Basically download you the latest hotfix package and install it using the command esxcli . That said, please make sure that your hardware is supported by the patch that you want to apply (see http://www.vmware.com/go/hcl). You can also do before installing the patch, is to do a "dry - run" to know what . VIBS are removed and which are installed by the patch. To do this add -dry - run to the esxcli command line.

  In the case where something goes wrong, you can revert to the previous state by pressing SHIFT-R , while the ESXi hosts begins the start-up.

  André

• Copy Clone VM on the remote host?

  We currently have a Vcenter configuration limited to 3 guests.  I am creating a system for disaster, assuming that our main centre of recovery should fail.

  So, I need to program a clone of the VM are held every week - but then I need to copy this clone to a remote host which is not in the same data center, although it IS on the same network.

  Is there a way to achieve side manually remove a host to Vcenter and adding remote host (4th) whenever I want to copy?

  If I copy the clone on an external drive, I have to copy it again to the remote host.  It is 2 instances of copy on the network and which can last for hours.

  I want to reduce it to a single copy and perhaps even automate it with a script, but I don't know everything that the CLI in ESXi.

  Any ideas are appreciated.

  Understandable, I thought you wanted to just copy of VMDK but a clone first takes a snapshot of the virtual machine. This removes the lock on the base VMDK. ESXi can run rsync, but it is not supported. It is perhaps a bit over your head because you have no experience with Linux.

  http://www.virtuallyghetto.com/2011/02/how-to-compile-statically-linked-rsync.html

  What you could do is however if sure the source host and destination have access to the same storage. Then plan a clone to the virtual machine, but leave it turned off permanently. In the case of DR, on the other host, go to the data store, select the virtual machine folder, right-click the .vmx and say file added to the inventory. You can then restart it on another host. Or the DR host only has local storage?

• Remove 5 ESXi host to vCenter 5

  I have a vCenter Server 5 I want to remove some stand-alone hosts in & add an another vCenter but these hosts option delete is grayed out.

  Other stand-alone hosts in this vCenter I can remove it.

  It is a new installation of vCenter and ESXi 5 Update 1 hosts.  The whole army are at the 721882 level.  I tried to put in maintenance mode, restart, unplug them, but delete is not always an option to select.

  Any help is appreciated.  Thank you.

  before attempting to remove the host from your vCenter database record, have you tried restarting your vCenter Server Service?

• The connection to the remote host has been lost.

  Seriously, almost every time I save a file and try to download it I get this error:

  The connection to the remote host has been lost. Click Refresh to reconnect.

  So I have to start again to download the file again... but no, I get this error again... until about 7 times then it will finally through. After that happening by once I have on a window of 2 minutes where I can download files without errors... then the cycle continues.

  This is driving me CRAZY! It happened for about 2 weeks. I have not recently changed all the server info. I used to download files on the same server from dreamweaver all the time with ease. My partner with the same configuration works always with ease. So why am I having so much trouble?

  I often have to troubleshoot PHP where I upload to the server to run it to see if it works, and I could have several times to download a file in the few minutes that becomes incredibly tedious task with this ongoing issue.

  Someone please help.

  Thank you!

  P.S. I'm using CS3.

  Ah ha! I finally got to work properly!

  Your site-> Site-> Remote Info Manager, try to check the passive FTP box and see if it works.

• procedure for disconnecting the remote host?

  I'm currently updating my site by making a few changes to the photos that I use. The problem is that whenever I press the F12 key to show my page, he will live. that is I am connected to the remote host.

  In the files Panel, I'm looking at local View.I disconnect from the remote host, but if I do something, and then press F12 to control browser, it connects to the remote host again.

  Site > Manage Sites, select the existing site to open the Site Definition dialog box. Select the Advanced tab, and then select testing server from the category on the left column. Set access to zero.

• change of page and go to the remote host

  I sent all my files to the remote host, but now I need to change a few things. I opened the page, I want to make a change from my local file. I made the change and it previews and it looks great. Now I can't figure out how to make so that it can change at the remote site. In the remote info from site management to maintain synchronization information are verified. Help, please. I'm so close how cela's site. I always test with the host country before I have it to point to the domain name. Thank you!!

  have you selected the file in the files Panel and clicked on SET?

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/