Remove active directory

Similar Questions

• remove an active directory domain controller that no longer starts

  I'm in the process or upgrading active directory from Windows 2003 to WIndows 2008.  There are between 20 and 30 of the domain controllers.  I'm about to halfway through the process and have had no problem.

  So far.  One of the Windows 2003 domain controllers has declined before the demotion.  It has been restarted and it won't start.  What can I do to remove this Active Directory server without starting the system?  Is there a clean solution to the withdrawal?

  Hi McGinleyM

  The answers community is more than one instance based home user. Your question would be better suited for our group of TechNet. The link is below. Thank you.

  http://TechNet.Microsoft.com/en-us/ms772425.aspx

• How to remove OracleContext of Active Directory

  All,
  
  We have extended our Windows 2003 Active Directory schema using the NetCA tool to test the integration of commercials with oracle 11 g. Completed trials, we are looking for a way to remove the schema extensions properly and remove OracleContext of Active Directory container. I was not able to find any documentation on this process. If anyone can help?

  You will probably want to consult Microsoft documentation.

  I found this:

  Removal of the schema information

  It is not possible to remove the schema object definitions. However, object definitions can be made unusable by the deactivation process. When an object definition is disabled, it is no longer can be used to create objects in the directory. Objects whose definitions have been disabled in the schema are designated as extirpated. >

  Source: how the Active Directory schema

• Active Directory user profile question

  I have a weird problem.  I use two server Remote Office Server R2 2012 with roaming profiles.  If I create a new user profile in active directory all works fine.  I had a situation where I had to remove a user profile for cause of termination.  He was rehired after 3 days.  I created a new profile with the same username as before.  Now, when the user connects, they are logged in a temporary profile.  There is no .bak profile lists on with rds server.  Event files give a 1521 event ID Windows cannot locate the server copy of your roaming profile and is trying to connect you with your local profile. Changes to the profile will not be copied to the server when you log off. This error can be caused by network problems or insufficient security rights.

  DETAIL - access is denied.

  and 1511 Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.

  I thank in advance for your suggestions.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• When you try to add 'fédération Service Active Directory' in the VM, it fails with exception after clicking on the last step of the wizard.

  Log Event Viewer as below.

  *****************************************************************

  Event log:

  Log name: Microsoft-Windows-ServerManager/Operational
  Source: Microsoft-Windows-ServerManager
  Date: 07/03/2012 18:09:06
  Event ID: 1600
  Task category: no
  Level: error
  Keywords:
  User: HDC\Administrator
  Computer: Win2K8HDCRoot.HDC.Com
  Description:
  An error has occurred in the Server Manager. An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1600
      0
      2
      0
      0
      0 x 1000000000000000
     
      15
     
     
      Microsoft-Windows-ServerManager/Operational
      Win2K8HDCRoot.hDC.com
     
   
   
      http://schemas.Microsoft.com/win/2004/08/events"xmlns ="Event_NS">
        An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)
  
     
   
  

  *****************************************************************

  Details of home:

  Win 2K 8 R2 Enterprise
  Processor: Xeon x 3440
  Roles: Hyper-V, file Services
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  Virtual machines running: 6
  Total none of the network adapters: 2
  1 NETWORK card: (Intel (r) 82578DM Gigabit Network Connection is connected to service internet broadback. "Statis IP" is set for my server.
  Not virtual networks: 2
  Virtual Network 1 is "External" type and connected to the NIC1. The value settings IPv4/IPv6 IP addresses and DNS automatic.
  Virtual Network 2 is of the type 'internal '. IPv4/IPv6 settings is set to Auto for IP and DNS addresses.

  *****************************************************************

  Information on the virtual machine:

  Win 2K 8 R2 Standard
  Roles; "Domain service active Directory", "DNS Server", "File Services" and "Web Server (IIS).
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  None of the network adapters: 2
  Network adapter 1 connected to 'Internal' with IPv4 set to a static IP address '192.168.10.1 ' and DNS set to ' 127.0.0.1'. IPv6 is disabled
  Network 2 connected to 'External' and IPv4 adapter set to automatic for the IP and DNS addresses. IPv6 is disabled
  Domain controller for HDC.Com.

  *****************************************************************

  History of the virtual machine:

  Initially, she felt just VS2010 and SP2010 installed without DNS and AD DS roles added. Later, we VS and SP2010 has been uninstalled via the Control Panel, as well as other programs, I can't recall. Then added roles DNS and Active Directory domain to create and control the field x ".com". After a few days, another virtual computer has been configured in the same way and 'AD FS' role added to try app based on the claims. In the coming days, all of the roles above have been removed and added to create and control the current domain ' HDC. Com'. Before this step, the self-signed certificates that have been installed as part of the App claims have been removed from MMC, and IIS services. Don't forget to change the name of the computer as well.

  *****************************************************************
  I'm not good at bases of the any tried out above learning, but ask the members of the scholarly community to help me solve the problem and I'm sorry if I ask some silly questions as part of this thread.

  Hello

  Is generally answer the question you have posted in the Microsoft Answers forums. It is better suited on TechNet forum
  TechNet Forums -http://social.technet.microsoft.com/Forums/en/categories/

• Active Directory Domain Services is currently unavailable ___I am Windows 7 Home premium; and I'm the User.___How do to ensure that the available ADDS? ___

  After about 3 weeks working with Dell Inspiron 14 R and print with HP laserjet 1020, without problem, now I have a problem: when I try to "find the printer (in MS Word, MS PowerPoint, MS Excel for example) I get the message: Active Directory Domain Services is currently unavailable.

  I am running Windows 7 Home premium; and I'm the user.

  I try to remove and reinstall hp laser jet 1020 once again, but the problem still exist.

  After I opened the menu devices and printers, and then click the Hp Laser Jet 1020, the category of this printer icon: 'unknown '.

  How can I make the available ADDS?

  Try this weird cure:

  Just open Notepad, go get a printer and add the printer from here.

  I can now print all programs.

  He worked for others; like I said, weird!

• Active Directory Domain Services are not available

  Can't use my printer. I get message 'no printer not installed' even if it has been working fine for months. When I click on the printer I get the message "Active Directory Domain Services unavailable" if I go to the devices & Printers and right click on the default printer (with the green check mark), then choose 'Printer properties' I can click on 'Print Page of Test' and he does! Unable to print anything at all in word. I use Windows 7 Home Premium. Any help would be appreciated.

  Your PC is actually on a network?

  Sometimes its necessary to unplug the printer, uninstall all printer from Add/Remove software, and then reinstall the printer according to the instructions of the manufacturers

• How can I delete an Active Directory user on a computer

  Hi all

  Thank you in advance for the answers.

  I have a user Active Directory on a computer Windows 7 Pro that I want to delete on this computer, and then have him sign in again and re-create the profile / user. (I have problems with its current profile)

  I don't know what the best way to cleanly remove the AD user on the Windows 7 Pro computer. Any help would be greatly appreciated.

  Thank you

  Alex

  If the connection is an AD account, you can simply delete the profile from c:\users folder and then it will be re - initialize the whole profile when the user logs in.  This is where the the user registry hive is stored, so it also cleans the registry by deleting this folder.

• where domain services active directory

  I am trying to install my HP F4500 printer wireless on my new HP Probook 4430 s.  I get the message that Active Directory domain services is not available.  I looked at every page HP I can find. enabled, disabled, uninstalled and reinstalled - worked on it for a week. Can anyone help.
  I went to activate windows to confirm that I have a windows on my computer.

  Windows 7 64-bit on Probook.
  Thank you
  Barbara
  E-mail address is removed from the privacy *.
  E-mail address is removed from the privacy *.

  I get the message "Active directory domain Services is not available.
  
  One of the reasons why I said is that I have been unable to identify my printer installed as default printer.

  The thing is I can print Word and Internet but not Excel.
  I've seen a lot of questions on this subject, but no solutions.
  Do you have a?
  

• DMVPN and active directory (logon)

  Hi all

  We have a DMVPN configuration between a few sites and everything seems fine, except that the logons through the VPN for a new domain active directory are very slow (10-15 minutes). I believe that the problem may be with the fragmentation of tunnel and packages such as AD is configured correctly.

  I am looking for some recommendations or advice on the MTU and TCP MSS settings see if it solves the problem.

  both the hub and the spokes are currently with the following settings MTU and MSS (ive removed some irrelevant information) Tunnel0 was originally a mtu of 1440 but if whatever it is 1400 is even worse.

  Thank you

  interface Tunnel0

  IP 1400 MTU

  IP nat inside

  authentication of the PNDH IP SP1

  dynamic multicast of IP PNDH map

  PNDH network IP-1 id

  IP virtual-reassembly in

  No cutting of the ip horizon

  source of Dialer0 tunnel

  multipoint gre tunnel mode

  0 button on tunnel

  Profile of ipsec protection tunnel 1

  interface Dialer0

  MTU 1492

  the negotiated IP address

  NAT outside IP

  IP virtual-reassembly in

  encapsulation ppp

  IP tcp adjust-mss 1452

  Dialer pool 1

  Dialer-Group 1

  Darren,

  In general the prolem is due to Kerberos on UDP traffic.

  There are several ways you can solve the problem:

  (1) transition to Kerberos over TCP. (suggested)

  (2) setting the MSS on the interface of tunnel not on telephone transmitter (recommended)

  (3) allowing the PMTUD tunnel (strongly recommended).

  M.

• Windows 8 "Active Directory Domain Services is currently unavailable"

  I've lost the ability to print on my printer HP 1210 of windows 8.

  The "Active Directory Domain Services is currently unavailable" message.

  I tried to correct by removing the printer via the control panel and then adding the printer, but no luck.

  The printer works, the computer works, but I cannot print from the computer. Help!

  Hi, Lucille.

  Try to access the print administrator servers. To troubleshoot the device, try the following steps.

  1. click on start, click on devices and printers.
  2. right click on the item of the printer and click on solve.
   
  Installation of control network - go to control panel, printers and click Add new printer. Click network printer, and then click Browse for printer. »
   
  What application you are printing from?  Uninstall/reinstall the application - e.g., Word, Adobe, etc...

• Active Directory groups can be put into service in the FDMEE places?

  Hi experts FeeDMEE:

  We are upgrading to HFM/FDMEE 11.1.2.4.    We would like to use only the Active Directory groups for our security in Shared Services.

  I did a lot of audit looking at whether we can use security location FDMEE ad groups.  So far, the only way I found to make the security location uses the native approach (settings / security settings / security location...) Security by location, click on keep usergroup to set up groups).    But it doesn't seem to be an option if you create groups such as native or ad groups (FDMEE them creates only natively).

  Does anyone know if it is possible in FDMEE to use security of the location ad groups?

  Thank you
  Mark Smith

  I discovered that it is more possible for FDMEE create Aboriginal groups for the security of the location.

  However, Active Directory groups can be added as members of indigenous groups.   In this way, users should only be added to Active Directory groups.    The only maintenance is to add or remove groups active directory to or from the indigenous groups of FDMEE.

• Attributes to Active Directory user in the ADF code

  Jdev Version: 11.1.1.7.0

  We are required to remove e-mail from Active Directory for the logged in user information and send an automatic e-mail. Security context exposes ADF LDAP user attributes?

  Is it possible to get the attributes of user without making a LDAP search again and instead of the connected in the context of the user?

  AFAIK you hand o get the attributes.

  This blog could help anything on the Fusion Middleware: retrieve the profile identity store modules

  And this blog Oracle Fusion Middleware security: two or three things you need to know about the API of the user role /

  Timo

• Continuation with VIO and Active Directory reference error

  While deploying the instance OpenStack de VIO, I get the following error message when checking the parameters of authentication source:

  Cannot find the specified user (Group). Details: The LDAP search request failed. Further reference

  This seems to be a problem, I met several times, where AD would send a reference instead of the response that the client must follow. But I don't see any option to allow removal with Active Directory. Is there a way around this?

  Concerning

  Gerald

  I found a work around for the problem:

  The query is successful when you use the ports for the Active Directory Global catalog.

  The ports are:

  • 3268 (without encryption)

  or

  • 3269 (with SSL)

  Disadvantage: You can't just use your do domain name address all the domain controller, you must specify one with its host name.

• vCAC 6.0.1 ASD Active Directory Endpoint

  I am creating and Active Directory endpoint in the 6.0.1 vCAC designer of advanced Service that uses SSL.  I am able to configure endpoint on port 389 or 3268 with success, but when I try to connect using 636 or 3269 it fails with an error wonderfully misspelled...

  Failed to create endpoint type AD vCO. Reason: Error: retriving server certificate. (Workflow: manage SSL certificates / certificates of the URL (item0) #6)

  
  

  It's not really doesn't tell me much.  I can say that it is having a problem for a reason, get the certificate of the server, but what prevents it from working?  I have a vCO connected to the same domain controller using SSL with no problems, although I import the certificate in vCO and restart the system before creating the connection AD it.  I had a colleague to look at the workflow vCO and noticed that the Manage "Workflow" certificates for the AD ASD Endpoint and he noticed an error undefined ADCertificateUtil().  This is a VMware built class which should be part of the AD Plugin in vCO.

  
  

  This led me to try and load a previous version of the AD Plugin in vCO, but I quickly discovered that no other version of the plugin AD that comes with the 5.5.1 unit will operate.  So I demoted vCO to 5.1.2 to give a try.  I loaded the version 1.0.3 plugin that has the class in the structure of the plugin files, but then discovered that no end point appear in the drop-down list in the DSA in vCAC 6.0.1.  GREAT!  So, I try to use vCO device version 5.5.0 which I remembered did not ship with a version of the plugin and then tried to download the AD Plugin once again, that worked.  Once I connect vCAC to this instance of vCO, I at least see Active Directory as an option.  I start working on it and I get the same wonderful error as described above.  Still digging into the workflow also shows the same of undefined ADCertificateUtil().

  
  

  I'm about to options for what I know to try and wish assistance.  The main reason for working through this problem is so I'm able to move from a field of AD password for password resets and the new creation of the user of a Service of Onboarding in vCAC.  Can someone help me with this?  I think I tried everything my mind can come with and now chosen to harass the communities for answers.  Thanks in advance.
  

  vCAC provides it's own series of workflow for configuring plugins different vCO. The workflow is a modified version of the original workflows plugin configuration. In this case, it seems that the workflow that ASD matters in the vCO and is trying to use for the configuration of the AD is an older version, the vCO is a more recent version of the plugin AD, where it seems that ADCertificateUtil has been removed in favor of the workflow of the library "import a certificate from URL". This is why it fails vCAC and it will also fail of the vCO.

  If it's OK for you, I would say to set up the Active Directory end point through vCO. If this isn't the case, then you can try to redirect the workflow that is used for the configuration of the parameters of AD. The configuration is a file that is located in ' / etc/vcac/vco-endpoints-workflows.xml '. You must change the endpoint "ad" to point to a workflow can configure an Active Directory server. You can try to configure create and update the workflow to point to the workflow rescue (the default configuration workflow that comes with the plugin AD) or create your own workflow and point to him. This however requires a restart of the 'advanced-designer-service' to pick up the new settings.