Remove all the patches and windows updates

Similar Questions

• installation failed several times to KB2656353 and KB2656370 security update. I downloaded all the patches and recommended tools. What should I do?

  Received phone call from someone who identified himself as a member of the Technical Support of the Windows team.  Says my calculation had sent messages back saying that I had a virus.  Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus.  Noticed that Windows update was not the last 2 weeks so I tried to run the updates.  I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370.  I downloaded all the patches and recommended tools. What should I do?

  Have you tried the recommendations in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-install-update-kb2656353-i-am-receiving/f3c353ca-4d85-44e6-a5f0-eb9a5330d7c8

  and this article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-updates-continue-to-fail-with-codes-0x66a/5e05e18e-E2E5-400e-B114-75f155571b5c

• Cant unninstall lightroom 5.4 required to install update 5.5, I remove all the files and registry, but install fails

  Cant unninstall lightroom 5.4 necessary to install update 5.5, I remove all the files and the registry, but installation fails again and again, now I can't use lightrrom... Grins.

  I use the SSD drive and I can't have a lot of file uninstal (often having to clean disk)

  Thanks for help

  Hello Jeff,.

  Thank you very much for your reply, I use windows 8.1! I found the problem: to install the new version installation needs the program old installation (but I have remove all the installer, because they use a place a lot on hard drive (SSD)).

  I have uninstall all Adobe and reinstalled, I save the full installer on an external drive. When the installer asked the former installer I indicate to programm my drive external and everything works fine now.

  Thanks so much for your help, I just do not delete the old file (sad having to save old installler just to install the new).

  Wallie

  (Sorry my English)

• I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  Hi Philofduluth and thanks for posting.

  There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

  If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• I still have not found "help" to tell me how to remove all the lines and columns beyond those needed for my spreadsheet.

  I used several worksheets.  More allows me to specify the rows/columns and then delete them.  This is to remove all the lines/columns beyond those set up and formatted for my spreadsheet.   I tried many ways to remove all additional lines/columns, but without success.  I even took the time to scroll down/on to highlight all the unnecessary lines and columns, but they do not remove it.
  Any suggestions?  I used spreadsheets most allow me to specify the number of rows/columns for my worksheet

  You can ask your question in the office | Excel Forum because it is not really a problem of Windows XP performance and maintenance.

  Office | Excel

  http://answers.Microsoft.com/en-us/Office/Forum/Excel

  Also, providing specific information may help to get a faster response or better, such as the version of Office or Excel? version of Windows XP? Home, Pro, 32-bit or 64-bit.

  I hope this helps.

• All Windows updates and all the patches and individual installation on my program

  Is someone can you please tell me why every windows update fills up my programs?
  I have about 30-40 on my all programs.
  Can I remove all?
  I don't have this problem on my other pc just this laptop.
  Thank you in advance.

  Hello

  It seems that no one is able to answer this question here. If you have 2 possibilities:

  -disable the update of windows to avoid an additional installation of new updates and etc...
  -go to "Add/Remove Applications" and uncheck the 'Show updates' (or something similar). This box should be at the bottom of this window

  Otherwise, you should check out other, more associated microsoft forums, or just google a bit around to find an answer.

  Welcome them

• I run IE11 8.1 on windows. Flash installed is 15.0.0. I can't seem to print all pages in a document, it shows only the first page. I've allowed Shockwave, disables the ActiveX and windows update. What can I do else?

  of pages

  This should be corrected from Flash Player 15.0.0.189.  Run Windows Update and make sure you have the latest.

• Update the BIOS and Windows Update problem

  Hello

  I have a Pavilion laptop g7-2017us running Windows 7 Enterprise. October 18,2012, HP maintenance program informed me that he had to update my BIOS. HP maintenance program had not updated of the BIOS.  See my BIOS is F.08 (dated 03/05/12).  Manually, I been looking for the latest BIOS and found that it was identical to what is installed on my computer.  It seems that software of diagnosis of HP gave me false alarms.

  Question #2: I periodically install updates to Windows.  I saw my story updates and found 2 failed: one who is 'recommended' and the other 'Important '.  I looked at the error code and they are all two "80004004. I did google search and learned this is very serious problem b/c Windows is damaged.  I tried using Microsoft 'Fix It', but it doesn't seem to help.  Anyone have any suggestions on what I should do?

  Thank you

  Jeff

  Open an elevated command prompt and type of each of these commands, press ENTER after each command, key when done try windows update in Control Panel. Don't forget to include spaces.

  net stop wuauserv

  rmdir /q /s %windir%\SoftwareDistribution

  rmdir /s /q %windir%\system32\softwaredistribution

  regsvr32 /s c:\windows\system32\wuaueng.dll

  regsvr32 /s wuaueng1.dll

  regsvr32 /s atl.dll

  regsvr32 /s c:\windows\system32\wups.dll

  regsvr32 /s wups2.dll

  regsvr32 /s wuweb.dll

  regsvr32 /s c:\windows\system32\dllcache\wucltui.dll

  net start wuauserv

• How can I remove all the errors and warnings Event Viewer administrative events, Application & system options?

  Please I need to remove these errors and warnings permanently on my computers?
  And please tell all the ways to get rid of these errors and warnings in Event Viewer... I'm waiting...

  You can clear the logs in the event viewer by going to the various sections, right-click and selecting "clear logs.

  What you can't do, is remove the event viewer or stop newspapers appearing again. It is part of the Windows 7 kernel and is useful to diagnose errors...

• ESX 3.5 - Update05A Bundle - removed all the patch bundles 2010 contents.xml

  Anyone else seen this behavior?  We received the new ESX 3.5.0 Update05A bundle, but now all the bundles of 2010 have been eliminated in the contents.xml and all our lines base with them now show no Applicable except Update05A patch.

  This is especially concerning based on the fact that some of the beams in U5A are older than previously published patches.  For example, ESX350-201003402-BG is python - 2.2.3 - 6.11.i386.rpm and U5A contains python - 2.2.3 - 6.8.i386.rpm.

  Removed patches VUM contents.xml by Update05A:

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  WPatton,

  I came across the same issue earlier today. I solved it by downloading the file contents.zip from the patch download site and replace the files in my filing of fix on the UNIFIED Messaging server with the files from the downloaded contents.zip file.

  Once I replaced the files and scanned a host missing patches appeared.

  Ive attached the zip file to my post.

  Hope this helps,

  VM215

• Remove all the transitions and lengthen the stills in bulk

  I have three questions about my project in Final Cut Pro 10.2.3:

  1. 1. I am not satisfied with the transitions.  Is it possible to remove it at once?
  2. 2. I would like to mix transitions.  Is there a way to put random transitions in bulk between cuts (which are mostly still images) or must be placed individually?
  3. 3. I would like to increase the duration of viewing on still images from 3 to 4 seconds.  Is there a way to do this in bulk?  If not, is there a way faster than anything by dragging each picture by the edge?

  Thank you for your time and patience.

  1. go in the chronology and index search index of clips for transitions. If they are all cross dissolves cross research. Select them all and delete.

  2 No.

  3. Select all images. Press Ctrl-D and type in a value. 400, then press on return.

• Cannot uninstall the program and Windows Update.

  Original title: RUNNING WINDOWS VISTA 32. WINDOWS INSTALL STOP WORKING. CAN NOT INSTALL OR UNINSTALL.

  HOW to REINSTALL WINDOWS INSTALL OR GET to WORK IF I can NOT INSTALL anything, INCLUDING WINDOWS UPDATES.

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         You get the error message?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/2438651

  Method 2:

  Check if the installation of windows services are running. Follow these steps:

  a. Click Start, type Services.msc and press ENTER.

  b. double-click Windows Installer.

  c. set the start type for Windows Installer to manual.

  d. Click Start to start the service.

  e. click OK.

  Method 3:

  Re-register the windows setup program. Follow these steps:

  a. click Start, click run and then type cmd in the dialog box, and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  c. to unregister the type install windows MSIExec /Unregister.

  d. to re-register MSIExec/regserverwindows installer type.

  e. try to uninstall the update from Windows.

• 100% Windows 8 using the drive and Windows Update problem

  I'm going to completely horrible with windows 8.  I use the computer for two reasons

  1.) to run a machine virtual linux which performs calculations for my work

  (2.) to run a very small application that connects to another computer and updates a display based on what is sent to it.  This application also shuts down the computer when the network computer told him to.

  The computer is not connected to the internet, so I chose not to do the windows updates (in Control Panel, never check, do not update, etc...), now that I have a set of drivers that work well.  Took me to update to the latest version of windows 8 (not 8.1), so that the service representative would talk to me, and the problem is more serious.

  I also disabled windows update service.

  Also, after startup, svchost.exe takes 100% of the use of the disc for anywhere from 1 minute to 3 hours.  It is usually about 5 minutes, but takes more time after an update.  I reinstalled windows many times, and the problem persists.  When no other applications running, 10 minutes after the start, opening of windows Explorer takes about a minute.  This computer has a disk decently fast (I tried to replace), a processor quad core and 16 GB of RAM.  When running normally, it is extremely fast.

  My problem is that when I'm at work, a team of 20 or so programmers and engineers may have to wait up to 3 hours for the use of the disc down before you start to work because Windows 8 is unable to work properly.  How can I get rid of this?

  I am considering really just to start the linux and rewrite of the application image bit will run in windows, but I don't want the headache of Active Directory on linux.

  http://social.technet.Microsoft.com/search/en-us?query=Windows%208%20%26%20linux%20virtual%20machine&AC=5

  Try this link for windows 8 & virtual machine. Also, if it's a pc intel based,.

  go to intel.com/support/software/drivers,locate the update utility intel that

  will scan the pc for auto drivers/software.

  Even with the new CD of the OS, you must always configure the hardware on the pc for

  the operating system, most of the cds do not understand that. No windows OS takes also, that

  long to make it ready for the tasks, no more than 10 minutes without

  Progress, stop the execution of its tasks, its in an "open loop"...

• Can I remove all the research and the web sites of my mini iPad

  I want to erase delete all search and my 16 gb iPad websites.  How can I do this

  go to settings and click on safari, go to advanced and find "erase all data of the web site. It's your iPad now, but also go to google.com if you. use it to search and connect to google and doing the same type of thing.