"Remove and rewire" feature/bug?

Similar Questions

• Remove and check color on Officejet 7310 cartridge

  I need all possible solutions for a new error message - remove and check color cartridge.  I work on a Mac OS 10.6.8 and aired recently in a lot of printer problems.  My HP Officejet 7310 was low on black ink, so I replaced the cartridge and it aligned properly without any problem. Later, when I tried to print labels, it gave me an error message and flashing exclamation point "remove and check color cartridge.  The color cartridge is not new and has not been replaced recently. It is half full. I did remove the cartridge and saw nothing wrong, so I re-inserted it. Once again, the same message. Then I tried to clean the copper contacts, as I've done it before. Still no change. I did a search for solutions and tried the following supposedly a HP technical support:

  Solution 1:

  Follow the steps below to power cycle your all-in-one:

  1. check that the device is on. Unplug the all-in-one power
  and unplug the USB/Ethernet cable.
  2. wait 30 seconds.
  3. connect the power supply only.
  4. Repeat steps 1-3 two times more.
  5. on the third time after plugging the unit running, reconnect the cable to the
  All-in-one to your computer.
  6. check the feature;

  Solution 2:

  Remove the cartridges from the printer and follow the steps below:

  1. clean the copper contacts of the cartridge with a slightly moistened cloth or a cotton swab
  with water distilled, filtered, or bottled. The tap water may contain contaminants that can
  damage to the ink cartridges.
  2. clean the contacts in the print carriage, inside the printer. Transport print contacts are made of copper and are found in transport, so that they line up with the contacts of the cartridge when the cartridge is installed.

  Solution 3:

  Reset the all-in-one to the default settings by using these instructions:
  1. disconnect the power cable from printer when the printer is on.
  2 press and hold # and 6 while plugging in the power cord.

  Continue holding until it displays the message Reset full Semi the front panel of the all-in-one device.

  NONE of them worked.  I am connected by USB as ever, our WiFi seems to remain stable.  Can offer you solutions to the problem?

  Kudo!  Kudo!  of course, the voltage is too low or the amps available short-term (short-term reserve amps.)  with 2 good carbatteries, I could establish free error initialize, all in this one works very well. Make sure the power supply is adequate, thank you and congratulations to all of you!

• An official way to disable, disable or remove the libraries feature in windows 7?

  I'm looking for one or the official way to disable, turn off or remove the libraries feature in windows 7?

  I know not how,
  http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries
  http://www.MakeUseOf.com/tag/Windows-7-libraries-%E2%80%93-and-why-you-want-them/
  http://TechNet.Microsoft.com/en-us/library/ee449413%28V=WS.10%29.aspx

  Not these please.
  http://www.mydigitallife.info/how-to-remove-and-hide-libraries-group-from-navigation-pane-of-Windows-7-Explorer/
  http://www.SevenForums.com/tutorials/61514-Library-pane-turn-off.html
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/turning-off-libraries-in-Windows-7/18d001dc-5319-440b-B29C-d348f81c929c
  http://www.howtogeek.com/HOWTO/21462/how-to-enable-or-disable-the-libraries-feature-in-Windows-7/
  http://www.askvg.com/how-to-disable-libraries-feature-in-Windows-7/
  http://www.mydigitallife.info/trick-to-open-computer-or-documents-as-default-instead-of-libraries-folder-with-Windows-Explorer-on-Windows-7/
  http://www.TechRepublic.com/blog/window-on-Windows/remove-libraries-from-Windows-Explorer-in-Windows-7/3401
  http://www.windows7hacker.com/index.php/2010/07/how-to-disable-libraries-feature-in-Windows-7/
  http://www.gHacks.NET/2011/11/07/hide-delete-or-customize-libraries-in-Windows-7/

  You left it I think.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/how-do-i-remove-libraries-Favorites-from-Windows/6a52e21a-DACF-47cc-883E-cea9c6af8b2e#footer

  If you do not trust the many lists or are you batting for the same amount of 10?

  Even if it's my favorite,

  http://www.SevenForums.com/tutorials/35627-libraries-folder-add-remove-navigation-pane.html

• Sandbox feature bug

  Hi guys

  Yesterday I was at a single customer and we were couple application virtualization. We just found a weird behavior of the virtualized application.

  Here is an example. When I virutalize Notepad ++. In the wizard, I specified to use the sandbox in profile (the default). When I run vitualized notepad ++ profile is created under my profile where I expected to be. Everything works as expected.

  But it's magic. When you create the directory that has the same name as the sandbox specified in Package.ini in the same directory where the entry points, as if by magic this new directory is your new sandbox.

  Example:

  The virtualized application directory:

  

  When I run the application my sandbox is created in my profile:

  

  But when I create directory Notepad ++ in the same directory as entered poins:

  

  New directory is my profiles for:

  

  Is it bug or feature? I could not find any word of this beaviour of the thinapped apps. I know I can do mobile applications, location of sandbox in the same directory as points of entry, but I the DIND'T know that "default location" of the sandbox can be easily manipulated.

  Thank you for your comments in advance,

  Hello

  It is a feature and not a bug. You can replace the sandbox location specified in package.ini or the default value, which is %AppData%\Thinstall with the help of the creation of a folder called Thinstall or real SandboxName in the same folder as the package entry Points are in. Another way is to use an environment variable.

  This way you are able to change the location of the sandbox without having to rebuild packages.

• Adobe Pro 9 has been uninstalled by 11 free Adobe and lost features

  Hello, I was using Adobe 9 to work for the years of man, which included all the functions like the extraction of pages, etc.  Today, I receive a notice for a free version of Adobe 11.  I have download to check and it wipes my Adobe 9 off the computer and remove all the features I need for work.  Today.  Is - it there anyway to find 9 Adobe I used who presented the document as the extraction tools, rotation, cropping, etc.?  Please help ASAP!

  If you mean you use acrobat adobe 9 and replaced it with adobe acrobat reader XI, then:

  1. Uninstall acrobat reader

  2. vacuum (http://labs.adobe.com/downloads/acrobatcleaner.html)

  3 reinstall acrobat 9.

• I remove and reinstall Flash Player 11.3 daily! How can I solve this problem?

  I use Firefox and IE. Every day I have to remove and reinstall flash player to use it. Every day, I get the message that I have not installed Player F and I must download it. I have check the Add-ons and I can't find it there, but it is installed in the program, the s, and the features in my control panel. I'm usin win 7 32 bit and I always download the last player F 11.3. I'm tired of going through the same process everyday! BTW, I delete all my cookies and browsing history each time I want to close my explorers. It is not new, but I always did, but the problem with the F lawstest player is fairly recent since the first time I have download F player 11.3! Please help me.

  Looks like you can run in a Windows authorization number, try the instructions in this FAQ please:

  How can I fix Windows with Flash Player permission problems?

  Thank you

  Chris

• Why AE cs6 will remove this great feature

  I posted this in the first forum as it affects the first and AE but I thought that post here as well to raise awareness and hopefully get Adobe to change minds on the removal of the feature http://forums.adobe.com/thread/989266

  Why first cs6 and AE cs6 will remove the great feature allowing the video be worked in Photoshop and then with the psd as images in first or AE to keep editing. CS6 support is no longer that and we have to make a video from Photoshop and then import the new video itself.

  http://www.video2brain.com/en/videos-13047.htm AE cs6 removed features

  With Photoshops video feature is very useful as here to dust content aware spotting bjects http://www.photoshop.com/people/russell/classes/camera-raw-and-smart-o see the tut 'video Smart Object in Photoshop.

  Or here where Rich Harrington shows some great Photoshop video effects and shows the benefits of DSP drag / move instantly going back to Photoshop for more adjustment without having to render it again again. http://library.creativecow.net/articles/harrington_richard/PS_Advanced-m extract/video-tutorial

  It seems that Adobe is proud, and rightly so, of Photoshops video handling capabilities, but force degrade us our images and wasting our valuable time by another output rendered when the feature was there to simply incorporate the adjustments with a psd and leave big media to make final rendering power encoder seems crazy.

  Photoshop has changed its operation in CS6. We had no time to adjust to all our integration features to catch up with the changes, we had to remove the feature for now rather than have them be broken.

  We are working on getting the integration between Photoshop and video at a better place as soon as we can.

• Why cs6 first will remove this great feature

  Why first cs6 and AE cs6 will remove the great feature allowing the video be worked in Photoshop and then with the psd as images in first or AE to keep editing. CS6 support is no longer that and we have to make a video from Photoshop and then import the new video itself.

  See the http://www.video2brain.com/en/videos-13091.htm at the end

  Photoshop has changed its operation in CS6. We had no time to adjust to all our integration features to catch up with the changes, we had to remove the feature for now rather than have them be broken.

  We are working on getting the integration between Photoshop and video at a better place as soon as we can.

• When I opened my firefox on my mac - it opens to a blank screen. I tried to remove and redownloading but the same thing happens. How can I fix?

  When I opened my firefox on my mac - it opens to a blank screen. I tried to remove and redownloading but the same thing happens. How can I fix?

  Ahh. I thought you meant Subject: vacuum

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox.
  Try the sites secure web. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• My Avast antivirus tells me it blocks "JS:Iframe - DPX [Trj] Infection" whenever I use Mozilla I have removed and reload Mozilla but still not the mess

  My Avast antivirus tells me it blocks "JS:Iframe - DPX [Trj] Infection" whenever I use Mozilla. I have removed and reload Mozilla but not always the message. Can someone tell me how to remove this virus that apparently focused on Mozilla. Thanks Bill

  If the problem is caused by an extension, you may need to remove. At this point, I would be just guessing because there is no a list in your system more details.

  Opened to the top of the Add-ons page, using either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Then consider whether you know it's useful and do not forget to install it. If this is not the case, turn it off and if it looks suspicious, remove it. (Sometimes a button Delete is not available when the extension has been installed outdoors. We'll come back)

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Does avast! still object?

• Removing and installing the RAM several times can affect to my Mac Mini?

  My little brother back RAM on my Mac Mini many times; but it remove the RAM properly and install it correctly

  Removing and installing the RAM may affect to my Mac Mini?

  Mac Mini (late 2012)

  OS X 10.11.5

  No, it should not affect the machine when the withdrawal/re-installing memory - correctly.

  My second thought about this - why it has removed/re-installed memory several times?  Trying to upgrade the drive?  change a component any?  repair?

  Materials only I 'played' were - SSD, adding second HARD drive disk with data doubling cable, insulating modular wifi/bluetooth, etc. and of course, the upgrade memory.  Once they did that, I got very little intention of reopening the mini - except air jet, clean the fan.

  Sam

• How to remove and delete a downloaded file

  How can I remove and delete a downloaded file. I downloaded a large file a PDF I want to remove

  You open the folder via the context menu of the PDF file?

  That should open the folder where you saved the file in Windows Explorer and there you can delete (delete) the file.

• Save and exit feature available in FF6, even after I adjusted the browser.showquitwarning

  Save and exit feature available in FF6, even after I adjusted the browser.showquitwarning

  Firefox 4 and later versions Save the previous session automatically, so it is no longer need for the dialog box asking if you want to save the current session.
  
  Use ' file > leave "or" Firefox > Exit "(Mac: ' Firefox > quit Firefox") If you want to restore multiple windows.
  
  You can use ' history > restore previous Session ' to get the previous session at any time.
  
  You may need to click the Firefox orange/gray button to see history.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Firefox/tools > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

• I installed the app Channel Four and I was never able to use it.  I tried to remove and re-install, but to no avail.  Any notice received with gratitude.  Thank you!

  I installed the Channel Four app on my iPad and I was never able to use it.  I tried to remove and re-install, but to no avail.  Any notice received with gratitude.  Thank you!

  Have you downloaded the correct version for iPads.

  https://iTunes.Apple.com/GB/app/4oD/id432494037?Mt=8

  Click on view in iTunes and download it from there.

• I don't get the feature crossed in my ipad 3 and another feature (ios 9.3)

  Please help me as soon as possible... I don't get the 9.3 iOS feature in my iPad 3 also, I don't get multitask... and I am not too clear other features

  It is QUITE correct!

  All new features are for the new iPad iPad iPad/Air 2 Mini, iPhone 5 and iPod touch 5th generation or later version.

  No older iPads (2, 3, 4 or 1st gen Mini) won't get any new cool features of iOS 9 and only, probably, only a small subset of iOS of Basic 9 has iOS 9 forward.

  More iOS 9.3 is a pretty lite, ho hum release without real traits useful for ANY iDevice and, practically, none for older iDevices.

  Some features old iPad models got, it is only but a few features and improvements.

  I have not updated to iOS 9.3 yet on ANY of my iDevices, and I don't think I'll do it again.

  Was not only the deployment of iOS 9.3 a debacle, the entire update, IMSO, is a total non-starter.

  Not worth the effort and time for users more older iDevice.

  Older IPads do not have enough material power to drive ALL the latest new and cool features.

  This will only get worse for older iPads as time passes.

  I don't see iOS 10 (whenever that will come) supporting ALL older iDevices longer!

  It is what it is!