Remove Fade Out audio and video.

Similar Questions

• audio and video out of sync in first pro cc 2015, player QT video on a mac mini

  So, I use Adobe Premiere pro cc 2015 to change a screen capture video recorded with quicktime player. I'm on a mac mini with OS X el capitan, and it was my first time using first (so I probably just doing something wrong because I do not know the program, but anyway, I imported the video into the first, (it's a .mov file format) and the video and audio are out of sync) so I thought ok, I can simply detach the audio, move it above, the re - attach it, right? so I found a part of the video that has been easy to match the audio and video, and I lined up. Everything was perfect until I went to other parts of the video and realized that they were always out of sync. Apparently, the video is at a different speed or format or something as the audio, and even if I have lined up on the one hand, the other parts are always out of step. I looked at how to fix, I messed with the project settings, then tried to change a .mov to a mp4 (because a mp4 file that I already have on the computer was functioning very well in first) and finally, as a last effort, I downloaded version 2014 so and NEITHER VERSION WORK they both the same number.

  If someone can please help me I WILL BE so HAPPY and thanks a lot in advance

  I am really sad because I'm upgrading to use iMovie (ugh) and I was so excited for the first time and now it is messed up, and I'm really disappointed.

  If it makes a difference, the microphone that I use is a blue snowball ice I bought a week ago (WEEK AGO) haha

  None of the parameters of creation, or QT player or something that might help is very much appreciated.

  Thank you, Owen

  Thank you very much!! I finally found out with the help of the family, but I thank very you much for help!

• Audio and video out of sync in first after importation

  Hello

  I've seen a lot of discussion threads on this site and others on the subject. I shot some videos on my iPhone 6s and wanted to compile it to Premiere CS6. When I watch the video on my phone, VLC or QuickTime Player, the audio and video line up perfectly. When I import it in preview the sync audio and video download very out of wack. I tried to convert the video in .mp4, .mpg, .mxf file formats, and nothing does the trick. I tried to use the hand brake to apply a constant rate, but not luck. Does anyone have a solution to this?

  Data sheet:

  CS6 6.0.5 Adobe Premiere version

  16 GB of RAM

  a lot of free space on the hard drive

  Thank you

  John

  If you go to the movies on a cell phone from Apple, you may need to use an Apple program for editing... have you looked at Quicktime Pro?

• Audio and video out of Sync

  I capture images from video game using ShadowPlay recording at 60 fps mp4 files. When I import into first and play in the sequence, the audio and video are out of sync. When I play in VLC or Windows Media Player, the timing is perfect.

  Why first plays the audio and video synchronized?

  The corrections that I found online that does not solve the problem are:

  -Make the video in the work area bar (it actually makes it worse for some reason any)

  -Edit video in .mov file extension

  -I know how to use Handbrake to make the files before import has also been suggested, but I don't want to have this extra step added to my workflow, it should not be necessary.

  Any help on this would be greatly appreciated.

  Tempest tim wrote:

  Also, is there no other way to get around the problem of variable frame rate?

  Not if you use the GPU hardware to capture your h.264 videos, there isn't.  First can not correctly handle variable frame rate images.  And the images only you're going to get your encoder is VFR.

  You have 3 basic choices:

  (1) stop using ShadowPlay and use something else which will tax your system more to capture video in a constant frame rate format.  There are other applications that capture images CFR, generally in AVI format, and the resulting files are massive.  You will have a drop in performance in the game when you use these applications.

  (2) transcode w/parking brake to the CFR

  (3) use a different NLE.  Sony Vegas, from what I hear, will support VFR without problems.  Most other NLEs will not, including Premiere Pro.

• Premiere Pro CC 2015 video / Audio won't play - Out-of-Sync Audio and video clock errors

  After the installation of Premiere Pro CC 2015 I am unable to actually play my video in the timeline.

  I must point out that the same video and audio files accurate work perfectly in my previous version of CC 2014.

  Usually when I hit the play button nothing will happen and then after a time it will stutter back and fourth between a small loop (no audio present) and give an error that says "clock Audio and video out-of-sync (instead of time) in"Adobe Player.

  I tried full uninstall and reinstall Premiere Pro CC software 2015 without success. I also tried to delete all the preferences of Premiere Pro to my settings user without success. I should also mention that after effects CC 2015 is oddly also often send me errors do not have enough executives, so I'm not sure if they are related. Once more, the CC 2014 version works perfectly.

  For reference the video file is a .avi with Xvid compression and sound is a .wav. These have always been used exactly the same with CC in 2014 without problem.

  Computer:

  8.1 - fully updated for Windows

  NVIDIA GTX 780 video card

  32 GB of ram

  3770K i7 processor

  All Nvidia drivers are also updated.

  I also ran a full virus and malware scan just in case for some strange reason, that was at fault, and I ran into zero issues. Media Encoder, Photoshop, and Illustrator CC 2015 that all seem to work great.

  I am quite technically savvy and this one left me speechless, that really stinks that I was looking forward to the potential improvements to speed updates. That's life.

  Matt Borchert wrote:

  Nothing seems to be enabled. The CAD is what is selected in CC 2015 as shown in the image above. It is the only available thing to choose, and I can't select None or disable.

  Thank you.  In 2015, CC, you can click on the settings... button in the Audio hardware preferences.  Then in the record of the OS dialog box tab, you can disable manually (for example, right-click and choose the appropriate option) the SPDIF input.  It is only a temporary workaround until get out us a patch with a fix, but let me know if it works for you.

• Adobe first Pro CC 2015 Audio and video out-of-sync after the upgrade of the 2014 cc

  Hello everyone

  Once the upgrade to first Pro CC 2015 I get all of my video projects that are locked with a yellow box (Adobe Player) that says "Audio and video out-of-sync clock to xx:xx:xx.xxx ', and all my footage has the same problem

  No reason? HE WORKED IN CC 2014 PEARLS!

  any help is very appreciated.

  OK, since I'm short on time and my boss's eye laser pierces my skull, I had to ROLL BACK TO CC 2014.2 G * T!

  Fortunately, there is a way MORE HERE: how access, restore or update any Version of Adobe CC apps | ProDesignTools

  don't forget to install the updates after: all updates of Adobe CC 2014: Direct Download links for Windows | ProDesignTools

  Lesson of the day: If you have a big project on creation, and you are tempted to update CC 2015 for THE MOTHER OF GOD NOT WHERE, AND GET THAT HAND OF THE MOUSE NOW! It will mess up your project and throw the errors that you never had in CC 2014.2

  Good luck!

• Why do my audio and video start in sync, then move quickly out of sync?

  I have just installed Windows 8 and have also ordered: 12 items first.

  I also have Windows movie maker.

  When I play my clips in Premiere Elements, they audio and video synchronized early, but quickly get out. This does not happen with Windows Movie Maker and I had tested a few videos NCH also editing software and do not have this problem.

  can someone tell me what I have to do to get this working right?

  MASMAS

  For troubleshooting purposes, assume that the video is characterized by a variable instead of a constant rate.

  1. download and install the free program of handbrake.

  http://handbrake.fr/

  2.

  Source

  Import your video 1280 x 720

  Then, where it says "Chapter", I put for seconds

  Destination

  Locate, and then set your backup location for the file to process

  Container

  MP4

  Picture tab

  Leave as is

  Video tab

  Video codec H.264 (x 264)

  Framerate (FPS) 23.976

  and point next to Constant Framerate

  Press start at the top right of the workspace

  Wait for 'Queue finished' in the progress bar in the bottom left of the workspace.

  Then determine if this H.264.mp4 file works for you in Premiere Elements project set the project preset manually set the

  NTSC

  AVCHD

  AVCHD LITE 720 p 24

  This should rule in or out a possible variable rate being at the heart of the problem.

  Thank you.

  RTA

• Audio and video out of sync after rendering

  Hey!

  I already asked a fairly identical question like this, but I have some news:

  First of all, my problem is that after the export of the audio and video is not synchronized as in the scenario. Well, many have told me that he deals with variable frame rates, because I have images is 25 frames per second and sequences with 29.97 fps. But normally first would have changed directly each element in my sequence (25 fps, 1920x1080p) settings. And later when I add the clip in MediaInfo, he also tells me that the frame rate is 25 fps constant, not Variable. So I think that this is not yet the problem more.

  But now, here's a little 'story': when I open the video after the return of his perfectly synchronized WITH the VLC Media Player (and not Windows Media Player).

  And my question is: how is this possible? Couldn't, I now just change the Standart to VLC Player and then upload it to Youtube with the normal sync? What is the difference between windows media and VLC media player in this case player? Maybe it's because I have a few Quicktime footage in my sequence, which can be read with VLC Media player and not with windows media player?

  If you have any ideas, let me know!

  Thank you

  You basically answered your own question. VLC has proved to be more versatile and superior then the WMP.

• Fusion audio and video, all clips / takes both

  Hello

  I am looking for a possibility to synchronize all my video clips with audio recorded external at the same time. Audio of a video have the same TC to synchronize.

  Selection of all media, the merge clips option is grayed out. Select a video and audio file, which works fine, but I don't like to do it manually for each clip.

  I just got the trail from the eyes of the plural, but here it does not work.

  Thank you

  Johannes

  I found a nearly quick workaround that works if audio and video have the same TC:

  1. Select all audio and video clips

  2. choose Create sequence multicam

  -> which puts each correspondent audio and video in a clean sequence

  3. Select all the new sequences a sequence open right click in the timeline.

  4 drag and drop the audio and video of the timeline in a tray

  -> which creates the merged clips

  5 remove all sequences of blocking

  It takes about 5 s by video footage and a bit of media management.

  But this should not be a big deal to implement this feature in first. So lets make a feature request!

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.

• Windows Media Player-audio and video freezes during playback

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER WHILE THAT WATCHING VIDEOS.  WHEN THE IMAGE AND THE SOUND HANGS, THERE IS A DULL NOISE.  THIS FREEZING HAPPENS ON EVERY MINUTE OR SO.  THAT HE IS PAST JUST STARTED ABOUT 3 DAYS AGO.  BEFORE THAT ALL WAS WELL WITH THE PC AND WATCH VIDEOS.  I RUN A FULL WITH MICROSOFT ESSENTIALS SCAN AND SAYS THAT SOME THREATS NOT FOUND.  I REBOOTED, DEFRAGGED, REMOVED THE POWER CORDS, ETC. WITHOUT SOLUTION.

  PLEASE ME TELL HOW I CAN STOP THIS PROBLEM?

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER WHILE THAT WATCHING VIDEOS.  WHEN THE IMAGE AND THE SOUND HANGS, THERE IS A DULL NOISE.  THIS FREEZING HAPPENS ON EVERY MINUTE OR SO.  THAT HE IS PAST JUST STARTED ABOUT 3 DAYS AGO.  BEFORE THAT ALL WAS WELL WITH THE PC AND WATCH VIDEOS.  I RUN A FULL WITH MICROSOFT ESSENTIALS SCAN AND SAYS THAT SOME THREATS NOT FOUND.  I REBOOTED, DEFRAGGED, REMOVED THE POWER CORDS, ETC. WITHOUT SOLUTION.

  PLEASE ME TELL HOW I CAN STOP THIS PROBLEM?

  =======================================================
  It might be worth a try to do a system restore in time before the beginning of the question.

  (306084) how to restore Windows XP to a previous state
  http://support.Microsoft.com/default.aspx?kbid=306084

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• LifeCam HD-6000 wrong with the audio and video lag during playback, also a problem with the autofocus.

  I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.

  There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.

  Thank you.

  Hi thebuell4,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Install the latest software/drivers for the lifecam.

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks

  Method 3: Follow the steps in the article.

  Image of LifeCam guard auto setting very frequently

  For reference:

  The problems of compatibility between LifeCam and other programs

• Audio and video files that has already worked on my computer no longer works.

  Audio and video files that has already worked on my computer no longer works and I get one of the three messages which are as follows:

  (1) the file can be used (but it is not used by another program, and then media player that I use to try to read the audio/video file)

  (2) you may not have access to the location of the file (and yet I am the administrator of the computer, I am the only user with access to the computer and I installed the files myself and they have worked fine up until now.)

  (3) your proxy setting may be incorrect (I use automatically detect my proxy settings that is the same settings I use for my network and the Internet.)

  All of the files in question worked previously but now continue to show these problems. If anyone can give me any information as to how I can get these files restored to their values of work please feel free to respond below or send a personal email with your solutions to * address email is removed from the privacy *

  Yours,

  Brent

  Hi Brent,

  You can try to uninstall last updates window who installed or do a system restore to a point before the updates have been installed and then install updates one by one to see which update is causing the problem.

  Method 1:

  You can read the following article to remove an update.

  Remove an update

  Method 2:

  If you cannot uninstall the updates, then you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Method 3:

  Try to install updates one at a time to see the update is causing the problem.

  Install Windows updates

  Hope this information is useful.

• Download and save audio and video files

  Hello

  I am trying to record audio and video files that are larger than 5 MB in size.

  I open a Http connection and asking to 128 KB each time until the completion of the data transmission.

  for some files that are 1 to 2 MB code does not work well, but if you have large files MB it throws the error, ' Eception Exception: myApp Application (201) does not; process is completed"

  How can I fix this error. I searched the forum for this error, I found some funda but has not found a solution.

  AM making ala invokeAndLater() and therefore not blocking is not the eventThread.

  Here is the flow of my code that establishes the connection and starts to download.

  the following code snippet shows the flow of the code.

  // Constructor: displays a popup screen that allows the user to select a list of audio/video files for the download. 
  
  // Dictionary obj is a vector that contains list of file names.// IAudioVideoPopUp is an interface implemented by the caller. 
  
  public AudioVideoPopUp(Dictionary[] v, IAudioVideoPopUp guideIntroManager)  {     super(new VerticalFieldManager());        if( v!= null)     {         caller = guideIntroManager;           for(int i =0; i< v.length; i++)            {             btnFileNames = new MyButtonField(v[i].value.toString(), "images/button1_big.png", "images/button2_big.png",  true, Font.PLAIN, 18, v[i]);             btnFileNames.setChangeListener(new FieldChangeListener()              {                     public void fieldChanged(Field field, int context)                    {                     if(field instanceof MyButtonField)                        {                         final MyButtonField tempField = (MyButtonField) field;                            UiApplication.getUiApplication().popScreen(UiApplication.getUiApplication().getActiveScreen());                           synchronized (UiApplication.getEventLock()) {                             UiApplication.getUiApplication().invokeLater(new Runnable(){                                  public void run()                                 {                                     UiApplication.getUiApplication().pushScreen(new WaitScreen());                                        caller.onClick(((MyButtonField) tempField).getDictionaryData());                                  }                             });                           }//                           PopupCloseThread pct = new PopupCloseThread(field);//                         pct.start();                      }                 }             });               add(btnFileNames);            }
  
            btnCancel = new MyButtonField("Close", "images/button1.png", "images/button2.png", true, Font.PLAIN, 18);         btnCancel.setChangeListener(new FieldChangeListener()             {                 public void fieldChanged(Field field, int context)                {                 UiApplication.getUiApplication().popScreen(UiApplication.getUiApplication().getActiveScreen());               }         });           add(btnCancel);       }
  
     }
  

  // onClick method that was implemented in the caller. 
  
  // dictionary is a vector, contains info about the selected file in the popup.
  
  public void onClick(Dictionary dictionary)   {     if(dictionary != null)        {         switch(ContentType)           {         case 1:               playAudio(dictionary);                break;            case 2:               videoSelected(dictionary);                break;            default:              break;            }     } }
  

  // the following code calls for the downloading and saving of the file.
  
  private boolean downloadAndSaveVideo(long movieID2, String fileName, String URL, int fileSize)    {     if(URL!= null)        {         try           {             String videoFileURL = AppConstants.SDCARD+AppConstants.CONTENT_PATH+fileName;             if(new DownloadCombiner(URL, videoFileURL, 128*1024).run())               {                 return updateVideoTable(movieID2, videoFileURL);              }         }             catch (Exception e)           {             Tools.print("XCO: GuideIntroManager: downloadAndSave: Error..:" + e.toString());          }     }     return false; }
  

  // this is not a thread class. // here an repeatdly making the requests to get all the data.// please go thru the run().
  
  public DownloadCombiner(String remoteName, String localName,         /*int connection,*/ int chunksize)    {     this.remoteName = remoteName;     this.localName = localName;       this.chunksize = chunksize;   }
  
  public boolean run()     {     boolean result = false;       try       {         int chunkIndex = 0;           int totalSize = 0;
  
            /*             * File connection             */           FileConnection file = (FileConnection) Connector.open(localName);         if (!file.exists()) {             file.create();            }         file.setWritable(true);           OutputStream out = file.openOutputStream();
  
           /*             * HTTP Connections            */           String currentFile = remoteName; //+ connectionType();            Tools.Debug("Full URL: " + currentFile);          HttpConnection conn;          InputStream in;           int rangeStart = 0;           int rangeEnd = 0;         while(true)           {             Tools.Debug("Opening Chunk: " + chunkIndex);
  
                conn = (HttpConnection) Connector.open(currentFile,Connector.READ_WRITE, true);
  
                rangeStart = chunkIndex * chunksize;              rangeEnd = rangeStart + chunksize - 1;
  
                Tools.Debug("Requesting Range: " + rangeStart + "-" + rangeEnd);
  
                conn.setRequestProperty("Range", "bytes=" + rangeStart + "-"+ rangeEnd);
  
                int responseCode = conn.getResponseCode();                if(responseCode != 200 && responseCode != 206)                {                 Tools.Debug("Response Code = " + conn.getResponseCode());                 break;                }
  
                Tools.Debug("Retreived Range: "+ conn.getHeaderField("Content-Range"));
  
                in = conn.openInputStream();              int length = -1;              byte[] readBlock = new byte[256];             int fileSize = 0;
  
                while((length = in.read(readBlock)) != -1)                {                 out.write(readBlock, 0, length);                  fileSize += length;                   //Thread.yield(); // Try not to get cut off               }             totalSize += fileSize;
  
                Tools.Debug("Chunk Downloaded: " + fileSize + " Bytes");              chunkIndex++; // index (range) increase               in.close();               conn.close();             in = null;                conn = null;              /*                 * Pause to allow connections to close and other Threads to run.               */               //Thread.sleep(1000);         }         Tools.Debug("Full file downloaded: " + totalSize + " Bytes");         if(totalSize>0)            {             result = true;                Tools.Debug("Wrote file to local storage");           }else{                result = false;               file.delete();            }         out.close();          file.close();     }         catch (Exception e)       {         result = false;           Tools.Debug(e.toString());        }
  
        return result;    }
  

  A little patience please.  Don't forget that you are awake does not mean that other people are.  I'd leave a Thread open for at least 24 hours before bumping.

  I'm sorry to tell you that invokeLater runs the executable on the wire of the event, not a separate Thread.  If you have actually started the treatment in the very thing you're trying to get away from.

  You must run the execution in DownloadCombiner treatment in a separate Thread.  This is why, in the article, which I suppose you DownloadCombiner, it extends Thread.

  Just for the record, DownloadCombiner is here:

  How - to download large files using the BlackBerry Mobile data system
  Article number: DB-00619
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800431/How_To _...