Remove multiple devices

Similar Questions

• AirPlay on multiple devices?

  In iTunes, 12.1 I was able to listen to my music anywhere in the home using AirPlay in iTunes. I could send a read track to several devices at the same time including Apple TV, and Airport Express... See screenshot:

  

  I've just updated to iTunes 12.3 but as you can see is more AirPlay icon... See following screenshot:

  

  The AirPlay button has been removed from the latest version of iTunes? Or is it just a mistake in the software on the 64 bit version of Windows?

  Can someone let me know if Airplay works for them in the latest version of iTunes if you please?

  Thank you...!

  Ken

  I 12.3.2 on a Win 7 PC at home and AirPlay works very well to multiple devices if you wish.

  First make sure your AirPlay devices are on and signed in the same network as your PC (make sure that no is a guest SSID if you have one, including the PC).  If everything that extract, try signing of colocation in iTunes and all the Apple TV you have, then reconnect (first, then other PC devices).  Sometimes this whip antenna emits.  If you still have difficulties, back up your iTunes library and then do a R & R of iTunes to see if something has been corrupted by the update.

• Windows 7 network can't see multiple devices on the network

  Hi all.  I'm about to leave my hair on this issue - I hope someone can prevent the horror that would be me without hair.

  I am running Windows 7 Home Edition on a personal computer that is connected via cable to a router UVerse also providing my home with wireless services.

  A few months ago, I could see - of my PC, network and devices and printers - the two PS3, XBox systems and Samsung TV devices that are connected to my wireless network.  Apparently randomly, my computer has ceased to be able to see these devices.  After trying everything I could think of, I've finally reformatted the system (before Christmas) and everything was good again until last week when my computer stopped once more to see these devices.  I * really * don't want to reformat my system again...

  Here are some details on where I started after the last reformat:

  The PC is connected to a homegroup.

  The PC has a wired connection to the router.  The devices are connected over wireless.

  The firewall is turned on.

  AVG anti-virus has been activated.

  Network discovery, file and sharing printers and streaming media are all enabled.

  Password sharing is disabled.

  Devices could stream Netflix/Hulu as well as files on my computer (using the PlayOn Server - I've never used WMP).

  Now my devices can still Streaming Netflix/Hulu, but not the files on my computer.  The PC can't see the devices and the devices cannot see the PC.

  Here is a list of most of the things I've tried to solve (although I've done so many things, I probably don't forget some):

  I added the PC to the wireless network, so now that it is connected both cables and wireless.  I even tried to fill these connections, although I removed the bridge when I saw that there was no difference.

  I have disabled the firewall completely.

  I disabled the AV entirely.

  I switched a residential group to a working network and vice versa.

  I gave you the assigned IPs devices in the router configuration.

  I've rolled back all the windows updates installed since the last time the devices showed in the PC network.

  I've removed the devices on the network, reconnected the and reconfigured to ensure that they have the media streaming (if applicable).

  I did several reboots the PC, the router, and devices.

  I added the PlayStation Network and XBOX Live and applications hosted under NAT/game on my router.

  I have enabled file sharing for devices that use 40 encryption or 56-bit.

  Additional troubleshooting information:

  When I try to add a device using the Add Device dialog box, no device never shows.

  Under media streaming options, when I look at instruments under all the networks and Local network, no unknown device only shows (even in WMP).  All devices that * show are already set to 'allow '.

  If I have access to my router configuration, the devices will appear as connected.

  I can ping devices from the PC.

  I searched endlessly on the Internet (including other threads on this forum) and have tried all of the suggestions I thought.  The only thing I can't do is activate uPNP on my router because routers Uverse do not offer this option.  However, I don't think that it's important because my PC could see these devices for some time after my last reformat and made no changes to the configuration of the router.

  Because multiple and different wireless devices are involved, and because a reformat solves the problem, in my view, it is a Windows problem, but I can't understand what to change on my system to make things work again.

  Anyone have any ideas?

  Hello

  Thanks for posting your query in Microsoft Community.

  It's a shame that you have to format the system first and now, the problem still persists. I really appreciate the efforts made to try to resolve the problem. This can be due to any dispute of third party software due to which the connection failed. I suggest you follow the methods below and check.

  Method 1: Run the network troubleshooter to diagnose the problem.

  Run the network troubleshooter

  Method 2: start the computer in safe mode with network and then perform the clean boot.

  Step 1: restart the computer in safe mode with network and check if the problem occurs, proceed as in the link:

  See: , start your computer in safe mode

  Step 2: If the safe mode with network works, perform clean boot and check if any third-party application is causing problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 3: To enable the network devices to display on the network map, they must meet four requirements:

  • Must be a HOME network or work: Mapping network only display the devices connected to a HOME network or WORK location. Devices connected to a network PUBLIC or FIELD cannot be displayed using the network card.
  • Devices must be DETECTABLE: The network discovery setting allows devices to be able to be seen by other devices on the same network. For more information, please consult: , enable or disable network discovery
  • Devices must comply with the LINK LAYER TOPOLOGY DISCOVERY Protocol: Topology Discovery LLTD (Link Layer) is a protocol developed by Microsoft to enable networked devices to 'discover' each other. If a device does not use the LLTD protocol so it can not be displayed in the network map. Windows 7 computers have the LLTD protocol implemented.
  • LLTD must be enabled on your LAN connection properties: The Link Layer Topology Discovery Mapper of e/s driver and the Link Layer Topology Discovery responder must be enabled on your local area connections properties panel.

  To check LLTD is enabled, you can refer to the following steps:

  a. Select open network and sharing Center by clicking on the icon of your network down to the right of your task bar:

  b. now, click connect to the Local network

  c. now, click on Properties

  d. ensure that two LLTD options below are selected (by default, these options are still enabled in Windows 7).

  From now to try the methods above and let us know the status. We will be happy to help you further.

• Download iOS 10 update once for installation on multiple devices via iTunes?

  I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.

  Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.

  Almost certainly not.

  Each version of the product Apple has its own download.

• How to remove multiple tags at once?

  When I opened display all bookmarks, I have a long list of tags - although I'm not there. The only way I found to remove is one at a time. Is it possible to remove multiple tags at once?

  Thank you!

  Have you tried to select the main tags folder in the left pane of the library and select several or all the tags in the right pane?

  You can remove all of the tags selected via the context menu.

• How can I remove Bluetooth devices in Bluetooth which are no longer available to be associated with menu?

  Under MacOS 10.11.5 El Capitan, I want to delete old Bluetooth devices in the menu. Following the instructions click on the 'x' does not remove the device - it does that the Mac trial pair, which of course is no longer possible because the device is no longer available. How can I get these unnecessary items on the menu?

  Hello mvheim,

  Try this.

  Hold down the alt key and click on the bluetooth menu.   In the menu dropdown > select the item you want to delete > click and the ability to remove or disconnect should appear. Make your choice.

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

• A thief can remove a device to find my phone without the icloud password?

  My ipad was stolen and I have it marked as 'lost mode' in icloud find my phone. A month later, I see that the device is disappeared from my icloud account?

  The device had an access code, but it was a simple because my children use it.

  My question is, if the thief has guessed the password device, can remove the device from the icloud or find my phone without knowing the password to icloud?

  Hi there Habine,

  So you're worried about whether or not someone can disable find my phone if they are able to guess the password and enter in your iPad. According to this article on find my Activation lock phone, no, they can't:

  Find my iPhone Activation Lock

  How does Activation lock?

  When you enable find my iPhone on your iPhone, iPad or iPod touch, your identifier Apple is securely stored on the activation of Apple servers and connected to your device. From then on, your password will be needed before anyone can turn off Find My iPhone on your device, erase your device, or reactivate and use your device.

  Activation lock is activated automatically when you use find my iPhone on a device that uses iOS 7 or later. You can Configure find my iPhone from your Apple device.

  You can also take a look at this article on what to do if your device is lost or stolen:

  If your iPhone, iPad or iPod touch is lost or stolen

  Thank you for using communities of Apple Support.

• 15 Firefox load pages several times in my sandbox but I have to click on them from the drawer to open and then manually - remove multiples which gives

  Firefox is loading pages several times in my sandbox - have to open manually from the drawer and then manually remove multiples or it screws until the opening - which is the cause - or chrome or IE do this

  Each button in the task bar normally represents a window of Firefox (or another application window). The two mysteries are (1) why so many windows of the same document and (2) why the windows reduced to the task bar?

  What is the URL of the page that keeps the opening of several windows (reduced)? Is this the same URL that you have as your home page?

  Could you try to use temporarily a blank home page and see if the problem of multiple windows disappears?

  Orange Firefox button or classic menu Tools > Options > general > "startup of Firefox".

• Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.

  Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.   Anyone who has similar problems and no one knows if there is a resolution?

  Thank you

  Johanine

  I hope that they address it quickly.  It is painful to have discovered my renowned PDFs are to difficult to identify file names their given by their authors.

• How can I set contact ringtone purchased on multiple devices?

  I have a few iPhones: 5, 6, and 6... How can I set ringtone touch purchased on iTunes Store on multiple devices?

  Because you can not download again for free, you will have to try to sync them with your devices, see this article:

  Download your purchases past - Apple Support

• I can't unlock my iphone by apple ID knowing that the previous owner removed the device from his account, but still the unit asks the old code in order to unlock the phone

  I can't unlock my iphone by apple ID knowing that the previous owner removed the device from his account, but still the unit asks the old code in order to unlock the phone

  If the device is always ask for the ID of the previous owner, then it is has not been deleted.

• Connection to multiple devices sequence using FF Fieldbus Foundation open VFD

  I am trying to connect to multiple devices on the same bus fieldbus. When I try
  to connect using 'FF VFD open' admission that he is VFD tag (I left it as)
  by default (0)). I can connect to a device, he questions and close the connection.
  However, when I try to do the same with the following equipment, it errors on Open
  VFD. The bus, everything seems to be connected correctly, I can query all devices
  there and get their various identity papers, so I think it's to communicate all the
  right.
  I tried to connect using different, unique VFD tags. As I mentioned, I
  have tried to disconnect and close the entire connection before trying to
  to connect to another unit. I tried to connect to individual units with the
  other disconnected from the bus and each will connect and work very well, so I
  know that everyone is able to work-just not when other units are also present.

  Any idea is appreciated.

  
  

• How to synchronize multiple devices (294 x) Rio usrp

  Hello

  I'm trying to receive 4 channels using two devices USRP-294xR (USRP RIO) to synchronously and run the example for the reception of several device program.   Often, I receive the error message "failed synchronization.  If I run the example several times in a row, this error message occurs more often than otherwise, but for all the times that he does not, I am able to collect data that seems like synchronous through the channels of reception.  So, in a way that works for me, but with the annoying feature that I need to run the program several times now until I am able to avoid the "Synchronization failed" error

  My installation includes an Octoclock connected to the Ref connections in and PPS in the two USRPs.  In the example, VI, I selected Ref in, but it is clear to me what choice should I use for relaxation.  Possible options are: 'Software', 'Immédiate', "Digital Edge", "Rx Start Trigger" and "Tx Start Trigger.  I had assumed my previous experience using these devices with the FPGA Ettus I would choose an option indicating that I tried to synchronize the external signal of PPS.  "External PPS" is not among the options of trigger, I'm confused as to how the synchronization.

  I saw the article below, but it's not not clear for me if I should be able to achieve my goal without making changes FPGA. It is possible to synchronize multiple devices using the program by default FPGA and example (i.e., for example RIO, not the host screw using the Ettus FPGA image)?  If so, any suggestions to help me avoid this error "synchronization failed"?

  http://zone.NI.com/reference/en-XX/help/373380D-01/usrphelp/synchronization/

  Thank you.

  Rob

  rkossler1 wrote:

  Since we did not have a 6674 t, I thought I might as well try to connect PPS from a RIO USRP to PPS on the two RIOs USRP.  I just used a BNC - T to "distribute" the relaxation.  It did not work - maybe for the same reason you mentioned on the PPS USRP out is not strong enough for the Octoclock by car.

  Yep, that's exactly it. The USRP RIO is not output enough power on the PPS TRIG OUT line to drive the lines of PPS TRIG IN two USRP RIOs, unfortunately

  rkossler1 wrote:

  How can I know which USRP RIO is the 'master '?  Do I need to designate in the software?  I chose arbitrarily use the device for which I have connected the PPS on the BNC - t 'RIO0', but I don't know how the SW knows what USRP I chose to connect the power cord to.

  The USRP captain's exit a PPS TRIG OUT in PPS TRIG IN sound. then all the USRPs you set this unit as the * first * device in the table of features of RIO for the façade of synchronization with a cross screw.

• Remove unused devices to LabVIEW

  Hello

  I have an application that I developed and we met an interesting problem.

  We use a USB DAQ device.  If we have 2 USB data acquisition devices, disconnect 1 and plug in the new the new device USB gets installed and identified as 'Dev2' is the default response of the DAQmx driver.  However, this creates a problem for our application, because our 'Dev1' now disconnected hardware DAQ reference address.

  So how ensure that ensure that when a device is disconnected it is removed from the Driver?  Is there a way when I bring my application in LabVIEW, I can remove the devices and rename the device connected to 'Dev1 '.

  Any help would be appreciated.

  Thank you

  Dan

  Hi Dan,.

  For now, he is not a programmatic way to delete individual DAQmx devices, but you can use the Configuration API of the system OR to import a configuration of MAX mode 'replace' to remove all disconnected DAQmx devices (and renamed it your connected devices, too). There is an example of how to do this in \examples\nisyscfg\Import MAX Configuration.vi.

  You can rename individual devices using the Configuration API of the system NOR. An example of this is in \examples\nisyscfg\Rename Aliases.vi.

  There's something somewhat related to the exchange of idea DAQ: available by type instead of DAQ hardware device number

  Brad