Similar Questions

• Some parts of the chain has lost communication with the Arduino.

  Everything by contacting arduino, the chain that I receive from the arduino is buffered, but it is not completely read by LabVIEW

  and change the data to trace some information is lost. Someone knows how to fix this?

  Information may be useful:

  Arduino mega

  Baud rate: 19200

  Delay in the Arduino loop: 10 ms

  The string is composed of 3 integers values concatenated like this:

  gh123ab123cd123ef

  I m attaching the Vi.

  Thx a lot!

  Paulo

  Is your waiting time in fact 0 milliseconds?  It is not very long wait for a message to come.

  Each message ends with a line as a termination character newline character?  You have the default stop character.  If Yes, then you're better to read a large number of bytes and let the end of termination character read, rather than using "bytes to the Port.  So now that you read, not all bytes have arrived yet, then you're bytes to the port will be less that you really want and you'll have the wind reading an incomplete message.

• Droid: you can remove part of the thread of the text, but not ALL?

  I would like to save one or more of the messages in a thread but quickly... text in time... the rest in this thread.  I know I can delte message by message, but I can highlight several texts & delete them all at once?

  I don't think you can do it with the stock in the messaging application.  You can, however, do it with a third-party application.  If you install Handcent SMS, it's pretty easy:

  -Open the thread (in Handcent SMS, no enforcement stock)

  -Press the settings button, and then press "More".

  -Press on "Batch Mode".

  -Check the box to the right of each message that you want to remove

  -Press the settings button, and then press "Delete selected".

  -On the confirmation prompt, select "Delete" (as an option, you can select the checkbox 'Delete locked messages' before you press "Delete" if all messages are locked)

  Handcent SMS is a free application available on Android Market.  I hope that's what you're looking for!

• try to remove parts of the file have to reveal the transparent background

  I'm ready to tear my hair.  I have a file I includes what appear to be letters.  However, as I am trying to remove the background (lettering is black, in letters, spaces such as the inside part of an O, are white and appear to be the background), the space becomes black, not transparent, which leads me to believe that this isn't really type, but a series of drawings to represent the letters (I lose you again?). What should I try to remove all white space to place this image on my background of work plan and be able to see that in the middle of the o and g-d, etc.? Attached, is an example of what I had to face for a while now.

  Thanks again,

  G

  In order to 'see through' the "D", must be a compound path. Try the "D" together and in the object menu, select a composite path > make. Then put on a colorful box and see what happens.

• Remove duplicates of the chain

  Hello

  I need help to remove duplicates from a string that contains years and ' - '. Example: 1988-1997-2000-2013-1998-1965-1997-1899

  I know it can be done in regular expressions, but have no experience in this area.

  Select REGEXP_REPLACE (...) of double;

  Thank you

  SQL >-example of production line

  SQL > with t (select ' 1988-1997-2000-2013-1998-1965-1997-1899' double Str)

  2  --

  3 - actual query:

  4  --

  5 Select listagg (str, '-') within the Group (order by null)

  6 from select (separate str

  7 in (select regexp_substr (str, ' [^-] +', 1, rn) str)

  8 t

  9 cross join (select rownum rn

  10 in (select max (length (regexp_replace (str, ' [^-] +'))) + 1 mx)

  11                                    from   t

  12                                  )

  13 connect by level<=>

  14                           )

  15 where regexp_substr (str, ' [^-] +', 1, rn) is not null

  16              )

  17       );

  LISTAGG(STR,'-') WITHINGROUP (ORDERBYNULL)

  -------------------------------------------------------------------------------------------------------------

  1899-1965-1988-1997-1998-2000-2013

  1 selected line.

• 2014 iMac will not recognize part of the promenade of fusion after failure bootcamp

  Hi all

  I tried to install windows 7 with boot camp. I put the disk in boot camp to be around 250 GB. When it restarts, it did not recognize the USB key and asked for a disc. I have no disc drive I did a hard stop down. This scene reproduces and I stopped again and it starts in recovery. I then deleted the bootcamp drive and tried the mac hd drive for all distribution. It froze and I restarted. I did not start so I went back into recovery and restored a backup. Disk utility does not show the 250 GB I booked for the boot camp. Only TI 777 free on 860.48. It is a Fusion of 1.12 to disc. Help, please. I know it is probably self-inflicted and I did several things wrong.

  Thank you for your time.

  2014 3.5 ghz i5 iMac 1.12 CT fusion car 5 k

  1 W7 is not supported on Mac from 2015. I wouldn't recommend any other attempt.

  2. If the restoration did not erase the entire disk fusion, you restored to a Volume of CS of OSX existing, which won't change size.

  3. start Internet recovery, remove part of the SSD and HDD, if necessary and then restore them to a newly created CS LV/LVG. You use Time Machine to restore?

• Extraction of fixed phone number valid in the chain

  Hello

  We have field Phone_Number where data from the source system are as below:

  OFFICE: 026346644 # MOBILE: 0506212159

  MOBILE: 055-4705510 # OFFICE: 06-5035522/530

  Problem - we need to extract the valid landline phone number United Arab Emirates UNITED string ignoring the remaining details. Guys like 'OFFICE', ' MOBILE in the data are not significant and should not be considered. Even if the chain has several fixed phone number valid UNITED Arab Emirates, from 1 single value among them.

  Approach: We use regular expression check with 'Match list contains' but check only works on any value and not on the substring or part of the chain. Please suggest.

  Thank you

  Amol

  Hello Amol,

  Control RegEx is an 'Audit' processor then it will only tell you if a value passes or fails a control. If you want to return a value [i.e. phone number retrieves] then you will need to use the replacement of match or regex regex. Yes, regex to works on the entire chain, so you will need to write your regular expression as a result to find the phone number in among other content by using a capture group [Regex Tutorial - parentheses for grouping and capture]

  Thank you

  Nick

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• Remove the dark part of the Image

  Hello

  I just started to work with NI VISION. I have attached an image with this post.

  Can someone tell me how I can remove the dark part in the picture? I read on the histogram, which gives a total number of pixels at each level of gray.

  But I don't know how I can use this information to improve the quality of the image, or in my case how can I use it to balance the values of pixels surrounded with the rest of the image.

  I hope I explained my problem properly.

  I found the solution to the problem. I used "Manipulation of pixels.

  If anyone has any better ideas then please share.

• I am trying to remove a price in pdf format, and a message appears "all or part of the selection has no available police." Cannot add or delete the current font using". I downloaded this font in my Adobe fonts, but still no luck.

  I am trying to remove a price in pdf format, and a message appears "all or part of the selection has no available police." Cannot add or delete the current font using". I downloaded this font in my Adobe fonts, but still no luck.

  How to update or download all the fonts in my Adobe Adobe Acrobat X Pro?

  Get the police does not always help, but to use a font you don't add it to Acrobat. Add you on Mac or Windows.

• The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem

  The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem if I'm updating from Acrobat X?

  You have the fonts installed in the system. This has not changed. (Having the police is not always enough, but it is certainly necessary).

• How to remove hidden links (how to remove the links, ONLY the hidden parts of the document)

  in Acrobat XI-> after deletion "text hidden" using the tool 'Remove hidden information'-> links still remain in the hidden passage / cropped -> so the real question is - HOW TO REMOVE THE LINKS HIDDEN in a PDF. An approach may be to remove 'links, Actions and Javascripts' tool 'Remove' hidden information - BUT it removes links TO the WHOLE OF the DOCUMENT - "how to remove the links, ONLY the hidden parts of the document"

  Hidden text is the collection of glyphs in the PDF page using the text rendering mode 3 (no terms, no fill).

  The links set up in connection with this hidden text are not 'hidden' (this isn't how it works with annotations PDF link - see ISO 32000-1: 2008).

  Any link annotation placed in a PDF file are the same as any other annotation link (with the exception, of course, of whatever Action the link happens to).

  Thus, no special sauce for the links that were placed in conjunction with now deleted "no hidden text.

  In the context of what you wrote, maybe it's you select - Ctrl + click the link annotations of interest and press the delete key.

  Be well...

• remove the light reflex in one part of the video image

  Hello

  I need to remove some reflex of light in my video (example image below).

  I can't open the AVI / MOV files in Adobe Photoshop Elements 10. Is there a chance to correct that (limited to the small part of the image) using Adobe first Elements 10 or Adobe Premiere Pro CS6?

  How can I do? Here are the 3 images.

  Best regards

  Michal

  

  The camera on a tripod?

  If so, you can easily hide the part of the image and use the levels effect to reduce glare.

  Because of the horizontal portion, you should probably use the cache 16 points. There are actually 9 points the mask 8 points will do the job as well. You can use a matte, but it will allow you to animate as easily if it is needed.

  I put the image on track 1 and track 2 copy. I applied the matte effect of garbage and the levels effect track two.

  

  

  If the camera was not on a tripod, you can animate the matte but it will take much longer.

  I created my mast with two images showing, but if I put the eye on track one, that's what I see:

  

  I understand it correctly? Is that what you wanted to do? I don't have the too dark window frame. You can still see a few highlights, which is as it should be, I think.

• PSE6 - remove the part of the drawing line

  Help... I need to remove a few black lines and replace it with just white. When I use the tool Eraser instead of the blank line, it changes soft apricot. I've tried other tools and I get a checkerboard. I rarely use PSE... and read the manual I can't understand this.

  You want the checkerboard. The checkerboard means that the eraser removed lines. It's the way to adobe to let you know that the part of the image is now empty. Otherwise you would never be able to tell the difference between a white and a white area. Try this: save the photo in JPEG on your desktop and open it up there. See, no checkered.

  CHANGE if it really bothers you, then do it. Go to layer > New > background from layer to your layer at the bottom.

  Now find the eyedropper tool. Click on the background of the design with it.

  Now the foreground color square should show the color of the background of the design (white or otherwise).

  Press X to switch the foreground and background colors.

  Now try the Eraser tool. Is this better?

• Regular expression to remove a part of the URL

  I need do the following:
  
  "" Search for all URLS that contain" http://www.mycompany.com/dept/catalogs/ ' and remove whatever happened... / catalogs / '.
  
  Basically I have 3000 + links that start with " http://www.mycompany.com/dept/catalogs/" and I need to strip it of everything what they have after the part of the URL .../catalogs/.
  
  Anyone know of an automatic way to achieve this?
  
  Thanks in advance!

  In what programming environment you doing this?

  In find/replace DW?

  If so, then try this carefully on a test page, because I have not tested:

  To find:

  http:///\/www\.mycompany\.com\/dept\/catalogs\/[^\"]*\".

  Replace with:

  http://www.mycompany.com/Dept/catalogs/ ".

  If you need it in another environment, let us know.

  --

  E. Michael Brandt

  www.divaHTML.com
  www.divahtml.com/Products/scripts_dreamweaver_extensions.php
  According to the standard scripts and the Dreamweaver Extensions

  www.valleywebdesigns.com/vwd_Vdw.asp
  JustSo PictureWindow
  JustSo PhotoAlbum, and alia

  --