remove the attributes does not

Similar Questions

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• Safely remove the device does not respond

  I've recently updated my laptop operating system to Windows 7. When I upgraded first, it worked normally. But recently I realized that when I click the icon remove the device safely to remove my thumbdrive, it does not for me already. I tried to right click, but nothing happens.

  Please help me! Thanks and appreciate your help!

  Have you checked in the Device Manager for the yellow or red flags on the USB controllers? If found, remove items and restart.

• Change SQL VO, but the attribute does not change, how to solve?

  Hi all
  
  I use p4045639 with OFA 5.7 Jdev
  
  I create VO for SQL query. later, I add a new column to the table (view) basic and edit the sql code of the VO.
  
  Everything seems ok, but will not be added the attribute and mapping would be incompatibility between columns and ViewAttribute.
  
  How to solve this problem?
  
  The first time I have not found this shift and this would cause a SQL statement error when make the method executeQuery in VO. And this exception cannot be caught in the java VO code so that I don't even see the full error stack.
  
  I have used Jdev and OFA higer version, don't forget isn't a similar error. Can someone tell me how to solve this problem?
  
  Thank you.
  
  Scott

  Hi Scott,.

  Please open the VO by double-clicking in JDeveloper.
  Click attributes in the left panel.
  Remove all the attributes of the right panel.
  Click the SQL in the left pane
  Paste your query, test and then click mappings of attributes. It will work

  Thank you
  Anoop

• Remove the function does not

  On a computer with Windows XP using Outlook Express, delete does not work. This can be corrected?

  Your deleted items folder is probably corrupted.  Close OE and delete the deleted items.dbx file (make sure you move the items you want to keep out of it first) and what opens OE it will create a new and the problem should be fixed.

  Steve

• Help - Add line and remove the line does not!

  Not able to understand why the button "Add and Remove row" do not work.

  Thanks in advance

  Hello

  To remove the specified line, use the function

  Table1._Row1.removeInstance (IND);

  where ind is the index of the line.

  You should put the button Delete in each row of the table and write onClic script:

  Table1._Row1.removeInstance (this.parent.index);

  BR,

  Paul Butenko

• Safely remove the device does not work.

  I would like to know if someone has problems with delete material it and eject the media safely? When when I move the mouse over the icon it reads safely remove hardware and eject the media, but when I click the icon, nothing happens. I don't want to corrupt my external hard drive by pulling out the plug. Any ideas?

  If you're not pushing the drive for all the possible performance it can give, you can disable the write cache and you won't need to use 'remove hardware safely' after it.  To change it, open Device Manager and expand the section hard drives.  Find the drive click the right button and select "Properties".  Under the "policies" tab, you will see two choices - 'quick release' and 'best performance' - with explanations for each.  As you will see in the explanations, if you select "quick withdrawal" you can simply disconnect the device at any time without going through the routine 'remove hardware safely '.

  Thank you
  Renjith

• Remove the button does not

  I created a form with insertion and only recording options. I thought I wouldn't need button Delete on this page.

  Now, I need to add the button Delete. I created a new page w / delete selected button and set the properties of the deleted button manually added exactly the same as the automatic delete button created.

  This is the screenshot of the button Delete I added.

  However, when you click it, nothing happens. No javascript popup or whatever it is.

  I thought to recreate this page. But I spent some time on a few things on the page.

  Does anyone have an idea on what's missing here?

  

  Hello

  You must update the "(traitement automatique ligne LMD) ' process,"

  Reach

  The process > after > process row to *.

  and check the option delete in the "supported operations"

  Hope this will help you

  Best regards

  Salim

• Firefox deletes href attribute if the link does not start with http://www.hc-sc.gc.ca/fran: / /.

  When you paste a link that has a href without http:// (ex: Open a PDF), HTML (not the source code mode) of an HTML editor mode, Firefox removes the href attributes. So I find myself with this source code: Open a PDF file

  So, how can I paste a link in an HTML editor in Firefox when the href does not contain a http://?

  When I run Firefox in Mode without failure, then the "href ="zotero://open-pdf/0_123456"' is not removed"

  More information: I create this link with a python script based on HtmlClipboard

  I already try to save a user.js in C:\Users\\AppData\Roaming\Mozilla\Firefox\Profiles\ with the code below, but without success: user_pref ("capability.policy.default.checkloaduri.enabled", "like"); user_pref ("capability.policy.policynames", "localfilelinks"); user_pref ("capability.policy.localfilelinks.sites", "zotero: / /"); user_pref ("capability.policy.localfilelinks.checkloaduri.enabled", "like"); user_pref ("capability.policy.maonoscript.javascript.enabled", "like");

  Windows 7, Firefox 50.0.

  Thanks for this! You directed me to the right direction, because the problem is caused by one of my extension. The funny thing is that I can not disable the extension because it is one that I should paste my link in the cause of the problem! If the problem is not yet solved, but at least I know where to focus. !

• Mute icon in the center of the screen does not move and does not remove

  Mute icon in centerl of the screen does not move and I can't remove it. It does not seam to meet what I did.

  Try below before he came.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Can not delete/remove the attributes on clips

  Hi. Is this a bug? I want to remove several attributes (ie: Lumetri) on more than 1 clip. When I select and remove them... Although I clicked OK. the attributes are not removed and still there? same thing I try individual clips

  Running the latest version of CC.

  I tried this on both my PC and Mac.

  Sam

  All the correct boxes are ticked?

  

• Hide the line of adf table based on the transient attribute does not

  I have a JSF page where the user can insert new line in View object . this View object contains a transitional attribute which indicates whether or not the record is newly created.

  On the same page, I have a table adf which is bounded on the city view object . This table should show only newly created records. my approach is to use expression language of in the renditions property to hide all the other lines that are not newly created. I changed the render property for the columns of the table as: rendered="#{row.bindings.RowStatus.inputValue eq'new'}" , but the table does not show anything.

  Then, I tried to change the made not for the column property, but to the outputText inside the same way. It worked, but the problem is that the blank line is always on display.

  So, basically because I do not hide the entire line, instead I'm hiding the text in the lines and lines with spaces empty is still on display in the page aside.

  The Table of JSF page where the made property is applied on outputText inside the column:

  <af:table value="#{bindings.UplodedFilesView1.collectionModel}" var="row"
  rows="#{bindings.UplodedFilesView1.rangeSize}"
  binding="#{CreatSR_UserBean.fileTable}">

   <af:column sortProperty="#{bindings.UplodedFilesView1.hints.FileName.name}"
  headerText="File Name" id="c1">

   <af:outputText value="#{row.bindings.FileName.inputValue}" id="it1"
  rendered="#{row.bindings.RowStatus.inputValue eq'new'}"/>

   </af:column>

   </af:table>

  I use Jdeveloper with ADF technology 11.1.2.3

  Thanks Timo,

  You are right. Its to late to hide lines after stamping in the row set. I solve the problem by filtering the view object, based on the transitional attribute in the section of liaison page. The steps as follows: (assuming that the object from view with the temporary attribute has been created, and the transient attribute contains the filtered values)

  1. Drag the view object on the page and also make the Table (in my case it might otherwise listen)
  2. On the page, go to the connection tab.
  3. Double-click the object desired in the links column.
  4. New window will appear titled with (change the binding tree)
  5. Check the option (enable filtering)
  6. Select the (filter attribute) and (filter value) for the selected filter attribute.
  7. Select (Display attribute) you want to appear in the page.
  8. Press OK

• Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

  Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

  You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

  It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

  Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

  If you want to make Apple know how you feel, you can leave your comments via this form

  http://www.Apple.com/feedback/

• the iTunes Setup program finishes, but the application does not appear

  For starters, I'm on Windows, but it seems that the system is not the problem because it's happened before, with my Macbook Air.

  I download iTunes on Apple's site and Setup will run as usual and finishes. But iTunes never displayed in Program Files, the destination he was supposed to have downloaded. I opened the Task Manager and tried to manually run the program yourself by using 'itunes.exe', but he writes that the application does not exist.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you