Remove the function does not

Similar Questions

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• Rename the function does not

  When you rename a file or folder I ALWAYS get the error message: this file or folder will not end.   Help!

  Hi Dr. Gerard,

  You can check out the following link and try the fix it or manually, try the steps and check if it helps:

  Error message in Windows Vista when you try to rename a new subfolder in a shared folder on a network: "the folder does not exist.

  http://support.Microsoft.com/kb/934160

  Hope this information is useful.

  Jeremy K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Safely remove the device does not respond

  I've recently updated my laptop operating system to Windows 7. When I upgraded first, it worked normally. But recently I realized that when I click the icon remove the device safely to remove my thumbdrive, it does not for me already. I tried to right click, but nothing happens.

  Please help me! Thanks and appreciate your help!

  Have you checked in the Device Manager for the yellow or red flags on the USB controllers? If found, remove items and restart.

• Help - Add line and remove the line does not!

  Not able to understand why the button "Add and Remove row" do not work.

  Thanks in advance

  Hello

  To remove the specified line, use the function

  Table1._Row1.removeInstance (IND);

  where ind is the index of the line.

  You should put the button Delete in each row of the table and write onClic script:

  Table1._Row1.removeInstance (this.parent.index);

  BR,

  Paul Butenko

• Require the function does not page load

  Hello

  I am trying to add a recordset for a page on my site, the wizard in DW.

  I did this perfectly fine, however, when I now try and get an overview of the page, it does not load anything, so I think it's a failure in the 1st line which is: require ('http://www.bhx-birmingham-airport.co.uk/Connections/dest.php');

  , The originally entered this as a virtual Assistant ('http://www.bhx-birmingham-airport.co.uk/Connections/dest.php'); but I changed it it threw an error indicating that the file is not found.

  Any ideas what is happening (or not as the case may be).

  Thank you

  When I now try and get an overview of the page, it doesn't load anything, so I think it's a failure in the 1st line which is: demand ("http://www.bhx-birmingham-airport.co.uk/Connections/dest.php");

  Yes, it would be. The command of PHP require() function takes a relative path to a local file. It cannot be used with a URL. It should be something like this:

  require("../Connections/dest.php");
  

• remove the attributes does not

  Hello
  
  I'm trying to remove some attributes of entries. However, the format specified to us if an attribute is not present, the entire delete operation fails. I want to make it optional, as if the attribute is filled for a user, delete, or ignore, and move to the next attribute.
  
  #####################################
  
  DN: uid = abc123, or = xxx, or = People, o = example .net
  ChangeType: modify
  delete: telephoneNumber
  -
  delete: mail
  -
  delete: sn
  -
  delete: givenname
  -
  delete: objectclass
  objectClass: tdsgroup
  
  ###########################
  
  Let me know it someone know how to do.
  
  Thank you, John
  
  Published by: user13658628 on February 8, 2011 09:49

  If the entry is missing for an attribute, a replacement will be usually work:

  DN: uid = scarter, or = People, dc = Example, dc = COM
  ChangeType: modify
  replace: telephonenumber
  -
  replace: mail
  -
  replace: sn
  -
  ...

  Although some tools ldapmodify IIRC do not like this format. Alternatively, you can make each change a separate operation, like this:

  DN: uid = scarter, or = People, dc = Example, dc = COM
  ChangeType: modify
  delete: telephonenumber

  DN: uid = scarter, or = People, dc = Example, dc = COM
  ChangeType: modify
  delete: mail

  DN: uid = scarter, or = People, dc = Example, dc = COM
  ChangeType: modify
  delete: sn

  ...

  allowing-c to continue on errors. Who has the disadvantage of leaving you with a bunch of operations failed you can sort (assuming you're be conscientious here) to see if something has no which was not supposed to.

  If you remove the attribute sn you might encounter some violations of the pattern if you are using the person as the usual person schema objectclass requires also sn.

  Another option is to use a pipeline and an ldif formatting module to ensure the DNs that you operate on have the data expect you.

• The function does not properly when you use the shortcut to insert

  Hello everyone. I am using first Pro CC V9.2 on a PC.  I am as well as a Lynda tutorial and told me quite clearly that using the comma key insert a subclip in my sequence.  However, using the shortcut brings in the full clip, not the sub.  I just bring my subclip using a drag and drop, which is really slow me down.  Anyone know what this could be?

  When you perform your subelements, you Restrict toppings to the limits of a verified subitem?

  

  MtD

• Store the function does not.

  My backup will not work.  It starts, but stops at half way through and gives this error message: incorrect function (0 x 80070001).  What can I do to fix this?

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Safely remove the device does not work.

  I would like to know if someone has problems with delete material it and eject the media safely? When when I move the mouse over the icon it reads safely remove hardware and eject the media, but when I click the icon, nothing happens. I don't want to corrupt my external hard drive by pulling out the plug. Any ideas?

  If you're not pushing the drive for all the possible performance it can give, you can disable the write cache and you won't need to use 'remove hardware safely' after it.  To change it, open Device Manager and expand the section hard drives.  Find the drive click the right button and select "Properties".  Under the "policies" tab, you will see two choices - 'quick release' and 'best performance' - with explanations for each.  As you will see in the explanations, if you select "quick withdrawal" you can simply disconnect the device at any time without going through the routine 'remove hardware safely '.

  Thank you
  Renjith

• highlight the function does not

  I just downloaded CD player after IX Reader on a previous computer.  I can't drive to recognize the text to highlight.  can't see a way to get text recognition to work

  Hello

  Could highlight the text using the highlight in CD player but it is not that the software opt for Recognition.You text would require Acrobat DC to perform this function.

  Concerning

  Sukrit diallo

• Evaluate the function does not not in obiee 11.1.1.7

  Hi all

  I finished the upgrade of obiee 11.1.1.5 to 11.1.1.7 on-site.

  After that I get an error when running a report, which is created using function must be evaluated.

  [nQSError: 43113] The message returned by OBIS. EVALUATE_SUPPORT_LEVEL inside the NQSConfig.INI is not set to support EVALUATE

  In my NQSconfig.ini I coundnt find EVALUATE_SUPPORT_LEVEL. So I added under content in the file NQSConfig.ini

  # EVALUATE_SUPPORT_LEVEL:
  # 1: evaluate is supported for users with the permission of manageRepositories
  # 2: evaluate is supported for all users.
  # other: assess only is not supported if the value is something else.

  EVALUATE_SUPPORT_LEVEL = 2;

  After this, I restarted BI services. But still, I am faced with same error.

  Guide me in this regard.

  Thanks in advance.

  Hi RR,.

  Try this scenario,

  Create a dynamic variable repository in RPD and use this variable in responses like BI @{biServer.Variable ['variable_name']}

  Check if helps.

  Thank you

  Sara - Sara OBIEE

• XP Home-ed: Spoolsv.exe; Scanost.exe and Scanpst.exe damaged files-(outlook 07). Restore the functionality does not.

  I have XP Home-ed with service pkg 3: I had a number of problems occur simultaneously in Sept. 2011. Outlook 07 will begin to open, then plant, and when I tried to print I get a Script error msg. I sort the MS Fix - it service and tried to reload the printer driver and reinstall Outlook, but nothing has worked.

  Checking, I found Spoolsv.exe service was turned off, turned on then, but then error SCRIPT and spooler turns off when you try to print. Further investigation found Scanpst.exe damaged and files-Scanost.exe (outlook 07). MS Restore feature has stopped working.

  Automatic update of virus or suspect MS. I have Norton 360.

  Proski

  Hello

  • This only occurs when printing from Outlook?
  • You are able to print using all other Windows applications as Internet explore?
  • What were the changes made before the issue occur?
  • How long have you been faced with this problem?
  • Who solve that you ran?
  You can check this link:
  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028
   
  See the following steps:
  Go into "start |" Run ', copy the following line and paste it into the line run

  regsvr32 ole32.dll

  Note: There is a space between "regsvr32" and "ole32.dll") and click OK.  See if that fixes the problem.

  If the previous step fails then I would suggest that you post your request in Outlook forums for better resolution.
  http://social.answers.Microsoft.com/forums/en-us/outlookacct/threads
   
  See also:
  How to fix script errors in Internet Explorer on Windows computers.
  http://support.Microsoft.com/kb/308260
   

• Remove the button does not

  I created a form with insertion and only recording options. I thought I wouldn't need button Delete on this page.

  Now, I need to add the button Delete. I created a new page w / delete selected button and set the properties of the deleted button manually added exactly the same as the automatic delete button created.

  This is the screenshot of the button Delete I added.

  However, when you click it, nothing happens. No javascript popup or whatever it is.

  I thought to recreate this page. But I spent some time on a few things on the page.

  Does anyone have an idea on what's missing here?

  

  Hello

  You must update the "(traitement automatique ligne LMD) ' process,"

  Reach

  The process > after > process row to *.

  and check the option delete in the "supported operations"

  Hope this will help you

  Best regards

  Salim

• Sum function does not work in the group clause current 'function not found SUM'

  Hi all

  Im working on one. Model RTF to use with EBS R12, I use the version 10.1.3.2.1 on Windows 7.

  I'm reports on invoices for a customer with a subtotal for each customer, but the subtotal does not work

  It worked with a later version of BI publisher model generator, but it was not the right version for EBS.

  The code is shown below, patterns valid OK it's just that when I try to preview the outout I get the error ' caused by: oracle.xdo.parser.v2.XpathException: not found "SUM" function.

  <? for each: G_CUSTOMER? > <? sort: client_name: "growing." data-type = "text"? >

  <? Client_name? >

  <? for-each: G_MAIN? >

  <? ADJUSTMENT_NUMBER? >

  <? NAME? >

  <? ADJUSTMENT_AMOUNT? >

  <? end foreach? >

  <? Sum (Currrent - Group () / ADJUSTMENT_AMOUNT)? >

  <? end foreach? >

  Pointers much appreciated.

  Thank you

  Guy

  Just should be fine, I guess.

  If you still get the error, try to remove this feature and see if the error occurs. Another error is caused by something else.