Remove the configuration of B2B entirely
HelloCould you please tell me how to delete my confgiruation completely.
I suspended my setup, it purged successfully.
But when I try to delete the agreement or whatever it is, I'm not able to delete anything.
Could you please tell me the order of removal of the configuration. I want to import fresh config again to completely remove the previous configuration.
Kind regards
Suckers.
I'll send you a script to remove. Let me know.
Tags: Fusion Middleware
Similar Questions
-
XP Pro\XP Setup dual boot - want to remove the configuration option and go straight to the Pro
Used my laptop (Fujitsu Simens Amilo Pi 1505/XP Pro) to install XP Home on a USB connected the SATA drive.
SFSG.
Now, my laptop keeps asking me if I want to boot into either Pro or Setup, with the installer has highlighted.Q. How can I remove the Configuration option and leave Pro as default boot?
Thanks in advance.
Open your boot.ini file (root partition C :), you should see something like the following:)
[boot loader]
timeout = 30
default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect
"multi (0) disk (0) rdisk (1) partition (1) \WINDOWS="Setup "/ fastdetectRemove the entry (the entire line) that has the word "Setup" in it, then you now have the following text:
[boot loader]
Timeout = 0
default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windowq XP "/ fastdetect-Alternative-
Start/Run/msconfig (this open the System Configuration utility.
Select the BOOT. INI tab
Click on the button "check all boot paths".If Msconfig detects a path not valid (you have stated that you have two)
you will be asked to remove the invalid path.J W Stuart: http://www.pagestart.com
-
How to remove the configuration of logical standby database cleanly
Hello
We are on the BSG with 11.2.0.3 version of DB. For unknown reasons, we would like to recreate the logic of the standby database and for this I want to cleanly remove/uninstall/remove LOGIC of DATABASE of the EVE of the DATA GUARD configuration that we have.
Setup of the DG has already 1 PHYSICAL STANDBY DATABASE that works very well. PRIM, PHYSICAL and LOGIC are all on different HOSTS. Could you please guide or we suggest exact MOS Doc id in this regard? I found an MOS Doc id which is close enough, but its steps include dg configuration completely deleting what I don't want. Only the logical Standby database must be delete itself so that it can be installed again properly.
We use the CONTROL GRID and DATA GUARD BROKER.
Bundle of thanks in advance.
Best regards
Hello
Thank you very much.
What I have is:
-DROP DATABASE (from logical database in standby)
-asmcmd > and removed the rest of the orphaned files related to the logical database.
-DGMGRL > remove the database logicladb; one
-Grid control > removed from here
-deleted the database logical PRIMARY related to logic, for example, log_archive_config.
Other steps > ID note (Doc ID 733794.1) about the LOGIC of STANDBY DATABASE (I think that MINING regarding)
She's.
Best regards
-
Remove the Configuration after adding to the models?
Hello
I wore as a result of the market-
1. using the base OS say win2k3 model I've deployed a new configuration (full Clone)
2. I installed my software and other things on the deployment configuration, and then I want to use this Configuration of my Gold, so I added this to the models.
3. now after adding (2) for models can I delete above configuration? Which will cause no problem in my model that was created in step 2?
Kind regards
esxvmuser
You can remove anything in LM without worrying from clones of this element. On the backend, Lab Manager removes only the files that have no dependencies. So the deletion of your configuration will remove LM but not ruin your model because the files of this model depends on are not removed until all dependencies are removed.
Dependence of follow-up and asynchronous operation garbage collection nodes are important elements of the LM system.
-
Remove the Configuration of data protection
Database Oracle 10.2.0.4
Before I signed up with this company, they had some consultants take two of their bodies and development of demonstration Data Guard on them. Now they need their instance of development back and I can't get the standby database is opened in read/write mode. I'm fairly certain that the primary database was successfully changed to stand alone. I followed all the steps described in: how to remove safely a Data Guard Broker Configuration [261336.1 ID].
In the case of the day before, I tried:
SQL > alter database recover managed standby database cancel;
ALTER database recover managed standby database cancel
*
ERROR on line 1:
ORA-16136: Managed Standby Recovery non-active
That tells me that it is no longer used for recovery... but if I try to open the instance for read and write I get:
SQL > alter database open, read write;
change the database open, read write
*
ERROR on line 1:
ORA-16003: standby database is limited to read-only access
I can't find any documentation on how to do it, so the question. How can I tell the day before to start rolling for himself?ALTER database recover managed standby dabase finishing strength;
Change the database for validation at the grade crossing;
ALTER database open; -
Remove the configuration and reset password on A9K - RSP - 4 G
We have completed the TURBOBOOT and updated version of the image, but we have to eliminate all the prior configuration and password.
What is the procedure for that?
Hello
Xander and I have implemented this document presenting the different methods of password recovery.
https://supportforums.Cisco.com/docs/doc-15870
Let me know if that covers what you need.
Thank you
Sam
-
Remove the Configuration of failover on the 4.0 unit (3)
Is there a way to delete unity 4.0 failover configuration (3), any ideas?
See the chapter on "Just uninstall failover Cisco Unity Servers"
Conversion of a secondary server to a server of the unit of Cisco for 60 days without a backend
Conversion of a secondary server to a regular Cisco Unity server permanently without failover
Conversion of a primary server to a regular Cisco Unity server permanently without failover
-
Cannot remove the installation of Visual Basic 6.0 documents tool.
I downloaded software for a PBEM game & when I double click on SETUP 1, was asked where to extract. I extracted it to my documents, and now I can't delete it.
Every time I try, I get an error message saying "cannot remove the CONFIGURATION 1: access denied, check that the disk is not full or write protected and that the file is not currently in use.
Can any ideas on how I get rid of him?
Hello
- You are logged on as administrator?
- Are you able to do a right click on the file?
You can view these methods:Method 1:I suggest you to make sure that the file is not protected in writing.Registry warning:
Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to remove the damaged registry entries.
However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, proceed as in the KB Article:
You can remove your usb flash drive write protection using the method below:
1. open the start menu and in the search bar type regedit and press to enter. This wil open the registry editor.
2. navigate to the following location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
Note:
If the StorageDevicePolicies registry key does not exist, you must create it manually.
3. in the right window, double-click the registration key and set the value to 0 in the value
Data area, and then press the OK button
4 restart your computer and try to copy files to your USB drives.
Method 2:
You can also try to boot your system to remove the file from the safe mode and check.
Here is the link:
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222Method 3:
You can also try to take possession of it and try to remove.
Here is the link:
-
I have a client who wants to remove their unity failover server. The unit is 4.0 (3) SR1. I removed all the stuff of CallManager thus failover is turned off but I was wondering what I would do on the server of the unit remaining. Is there way or reason to remove failover connections/services?
Thank you
Mike
It really depends what you want to do with the secondary server. At the very least, you should remove the configuration of failover from the primary server. See this link for more details.
-
BlackBerry smartphone how to remove the e-mail account?
Hi I just bought a BB Storm and owned a BB curve. I gave my BB curve to my daughter so she can use it, I made a transfer of information to and from BB but my email account is still active on my BB Curve. I tried to wipe it complete, but it is still there, how do I remove my email address from my old BB?
PHEW!
Thank you!!!
The e-mail configuration is stored in the ENCORE, not the BB itself (the BB has an interface for BIS, but BIS is the carrier). Thus, wiping the BB does nothing on the configuration. You have to go to
- Settings > email settings
PC/browser on your BIS site or carriers:
and remove the configuration for the e-mail account.
Hope that helps!
-
Remove the aaa in pix server configuration
I have pix 515 with version 6.x cisco and me configured RADIUS vpn connection client authenitcation. The radius server is windows 2003 and I have the following commands
RADIUS protocol AAA-server test
AAA-server test (inside) host x.x.x.x1 password timeout 10.
The vpn works great, now I want to change the radius server and I want to delete the order and add new, but I get errors of
When I give
clear the aaa-server test, Iget an error message
You must remove all corresponding entries before AAA
removing the last server in the test group
When I give
No server aaa test (inside) host x.x.x.x1 password timeout 10. I get
You must remove all corresponding entries before AAA
removing the last server in the test group
When I give
no RADIUS protocol aaa-server test I get
AAA servers configured! Cannot delete server_tag.
I'm in a loop. Can some one adivce me how to remove the aaa tag test the firewall server
Thanks in advance
you are probably still referencing it in the vpn setting somewhere.
for example
card crypto mymap TEST client authentication
You must remove this first
-
How to remove the entire NAC solution?
We recently received the request to work on the removal of the full implementation of the NAC of our company. The major problem is that the security team in place now was not around when it was introduced a few years ago. Any help on how the best way to rip it all up would be appreciated. Weve got about 1500 users, so its not going to be a small project to say the least. Fortunately for us, the team that has put in place did not a lot with it. IT doesn't check the user against the AD and allows or quarantines the user/machine, that's all.
Version 4.7.2
A question, what do you do with the migration? 802. 1 x?
In any case, I think the best option is to remove the switchports for the NAC by defining "uncontrolled port". Please notice that you must configure the VLAN, because most of the time the VLAN initial NAC is configured to isolate the client computer.
Please rate if this can help
-
I have a big event with the movement of the mouse on the many frameworks. My client may decide not to see the movement of the mouse. Is there a way I can remove the mouse from the entire project all at once, or what I should do a frame at a time?
-Stuart
Hello
Click any slide in the Panel of the film. Press Ctrl + A to select all slides. Right click on one of the blades and the point with the mouse context menu, and then clear the check box next to "show the mouse."
See you soon... Rick
-
Is it possible to remove the disposable disc to a pool configuration in VMware View?
I would like to remove the option of disposable disc several persistent pools in VMware View Horizon 5.3.1 (where virtual machines are already using disposable disks); However, there doesn't seem to be a way to do this in the options of the pool. Is it possible to remove the disk otherwise option or should I remove the old pool and create a completely new without this option enabled?
I used disposable disk option seems to be to save storage space, but I discovered that disposable disks have been updated only when displaying launched a turning off the virtual machines in the pool (which never happens). I thought that disposable records updated each time that a client shutdown/restarted the VM... but which is not the case. Given this information, I would like to stop using disposable disks as they really may not confer any advantage the way our persistent virtual machines are configured.
Thanks in advance for any help!
OK, you're right... only the drive letter customization is allowed.
Now to answer your question, the one and only formally is to remove the pool by archiving all disks persistent (user data disk), and then create a pool with the same name (but without SDS).
In addition, select all the archived UDD and then click on, "recreate". All new desktop computers will be recreated with the new spec,
Another way (not officially committed / not sure of its effects)
EAP-SVIVmPersistentDiskSpec entry will be there to ADAM OR = database server groups (VMware KB: connecting to the Database View ADAM)
This entry will be there for disposable system that has a parameter "DiskUsage is SystemDisposable".
Upron deleting the corresponding entry * may * end configuring don't not the SSD for the supply of others.
-
How can I remove the HP Network Configuration utility
I am P2Ving some HP machines and reading the posts here on how to remove most of the HP components, but I'm stuck on how to get rid of the HP Network Configuration utility program that puts the HP Network icon in the system tray. There is a post of Guillermo Musumeci in 2007 that said using this command:
SNetCfg.exe - v u cq_cpqteam
to do it, but I can not find snetcfg.exe on this server.
There is also a post of Jasemccarty in 2007 that said this keymay be the key to remove:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\
{4D36E975-E325-11CE-BFC1-08002BE10318}\{FD0FF0D6-4876-4894-9274-258564E35C07}
But this key does not appear in the registry on that server. Anyone has any ideas on how to remove the last piece of a P2V-centric software HP had VM?
Anyone know why HP makes breath difficult to remove their drivers and other components?
Thank you
Dan
Open the properties of your network card (either will do)
Go - properties and click the HP tool and select "Uninstall".
See also http://ctxadmtools.musumeci.com.ar/HPPSPCleaner/HPPSPCleanerDownload.html for a tool to strip all HP components for you - I use it regularly after P2Vs.
Maybe you are looking for
-
How to generate the digital output of the variable duty cycle and clock source being contrary?
I want to generate a digital pulse every front amount of my pulse counters. He must have a variable duty cycle. until now, I've been able to generate a digital output, but I can't change its duty cycle. pls tell how I should proceed? Thank you in adv
-
Hi I want to know the reasons in detail why can we periodically check web server? Thanks awaiting response
-
ERROR CODE 57TH ON AN OUTLOOK UPDATE
I HAVE A 2003 OUTLOOK SPAM FILTER UPDATE THAT ONLY SE NOT LOAD. I TRIED SEVERAL TIMES AND IT FAILS. IT GIVES THE ERROR 57F CODE What - what IT MEANS AND HOW can I SOLVE THIS PROBLEM?
-
E1-472p-6860 upgrade to 8 GB of RAM
Hi all. I disassembled the e1 - 472p. After removing the 3 cables in water, the hard drive is easy to replace. However, I don't see where the RAM is going - I guess that the whole motherboard has to be removed. Has anyone ever updated this type o
-
I can put the hard drive in a new gateway Pent IV w 4 memory locations and can take 4 gig of memory has a bad hard drive and will be given to me. my hard drive of 320 GB of my Pent III bridge works without problem has XP installed Prof. I don't want