Remove the material (hard drive?)

Similar Questions

• When I deleted a picture of my MacBook, why it also remove the external hard drive?

  So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

  You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?

• Equium A200-1AC - cannot remove the second HARD drive cover

  I have an Equium A200-1AC, there is also a second HARD-drive Bay, but I can't get the cover off the coast, can anyone help?

  Hello

  As far as I know, this HARD drive cover is only guaranteed with a screw and after the withdrawal of these screws, you should be able to remove the plastic cover.
  Maybe it's sticks somewhere, you can use a thin object and could leverage with caution
  But don t do something with force!

• Remove the external hard drive from Time Machine list of exclusions

  Hello, all. I already use TM to backup TO an external hard drive. But, I have a second DHM I want to use for all of my photos. The HD is listed in preferences on the exclusion list, and I currently have no way to remove it from the exclusions list. It is a Seagate HD. Is any way to remove it from the exclusions list?

  Copy all data on it to a different location, choose Utilities in the Finder Go menu, open disk utility and reformat the drive as Mac OS extended.

  (137638)

• Removing the virtual HARD drive / Datastore

  Hello

  Noob from VMware, which has inherited a system of perconfigured here-

  System = vCenter Server 4.0

  I have a datasotre that is down and which contains a couple of virtual hard disks associated with virtual windows servers. Are not readers of operating system on servers, but they are readers previously configured windows backup (backup of the Server 2008 and 2003).

  "Therefore, the servers went offline and when I try to start the server I get a message saying"virtual disk"drive hard n is not accessible on the host:

  Because virtual servers are powered off can I just remove the drive through the settings or Windows OS to complain that a disk is missing and if yes is there a way round this?

  The data store was a store NFS running on an old box of linux which is dead completely and can not be recovered, if I need too know how tell - associate this store from the servers.

  Thakns to help you

  Kipster

  Hello

  Hello from the Canada

  Yes, you can simply delete the virtual hard disk to the Virtual Machine through 'change settings '.

  Then turn on your VM again

  Once you have your data store to save and launched, you can add it back into your virtual machine.

  Concerning

• Remove the old hard drive's "system Reserved" partition

  I installed a new Seagate 1 TB hard drive and a new operating system Windows 7 Home Premium 32 - bit on my HP Pavilion a6500f PC.  I kept the old Seagate 500 GB disk, put it in an envelope and formatted to use as a unit of storage for backup of my drive.  However, when I open 'Computer' after having turned on the envelope I have 2 drives listed instead of one.  It says a (J) is the system reserved partition and the other (K) is the drive.  I put a picture to show what I mean.

  

  As you can see in the middle there are two partitions for the main drive (C), and the bottom shows the drive J and K.  What I want to know is how to get rid of this drive J so that all I have is the K left.

  Help will be greatly appreciated!

  Personally, I would use free mini tool to format the drive externally

  Of course you have formatted the other not the entire disk partition

  Reason to use the mini tool is that it is more user-friendly :)

  But you can drive system 6 reserved a right click and select Delete volume

  http://www.partitionwizard.com/free-partition-manager.html

  https://www.YouTube.com/watch?v=JhHp2ZRWefk

• Do not release after removing the external hard drive of drive letters

  Hello, I'm having a problem where 1 of my external hard drives, lost its drive letter so I he reassigned another letter after doing so, the drive letters released (reset to available) once I deleted the drive I have now 5 drive letters in my computer that is unusable and not visible in disk management. So now I need a way to reset the drive letters F G H I J back to available for use please. Here some screenshots to better understand what I got.

  OS: Windows 7

  

  

  

  of the information system

  Drive F:
  Local fixed disk description
  Not available Tablet
  File system is not available
  Size not available
  Free space is not available
  Volume name is not available
  Volume serial number is not available
      
  G: drive
  Local fixed disk description
  Not available Tablet
  File system is not available
  Size not available
  Free space is not available
  Volume name is not available
  Volume serial number is not available
      
  Drive H:
  Local fixed disk description
  Not available Tablet
  File system is not available
  Size not available
  Free space is not available
  Volume name is not available
  Volume serial number is not available
      
  Drive I:
  Local fixed disk description
  Not available Tablet
  File system is not available
  Size not available
  Free space is not available
  Volume name is not available
  Volume serial number is not available
      
  J: drive
  Local fixed disk description
  Not available Tablet
  File system is not available
  Size not available
  Free space is not available
  Volume name is not available
  Volume serial number is not available
      
  Q: by car
  Local fixed disk description
  Not available Tablet
  File system is not available
  Size not available
  Free space is not available
  Volume name is not available
  Volume serial number is not available

  the disk management

  

  found the fix but tried before and nothing so if you have this problem too, you may have to try a few times at most 2 before finding another fix

  found a right quick way to avoid typing it

  • Run the command prompt as administrator , and run the following commands

    Chkdsk /r /x

    (Check a drive for errors and recover readable information.)

  • Press Y to perform verification on the next launch upward and reboot your PC.
  • Let CHKDSK finish

  then check if the problem has been resolved

• How to remove the old hard drive files. Can not defragment

  Not enough space to defragment.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

• Removed the HARD disk with MBR/BCD who installed Vista x 64 Business on the new HARD drive

  I have vista x 64 business installed on a HARD drive, but it was (and still is) installed on an older HDD aswell and the smallest, the result being that when I removed the old hard drive to put in another computer, I was unable to boot the copy of vista on the new HARD disk as the MBR or the BCD bit that allows me to choose what vista start is on the old HDD. Using the installation DVD I can get up the command prompt and run Bootrec.exe without the old HARD disk installed, which can find the vista installation, but fails to solve the problem. I'm not an expert so I can't properly use Bootrec.exe, and startup recovery also does not work, although it seems to say that something to do with the startup has been fixed. Is it possible that I can get the computer running without the old HDD without having to reinstall vista on the new hard drive? Currently, I put the old HARD return drive to start the new installation of vista.

  When you move an old hard drive to a new computer, the installed operating system will find new hardware (motherboard, etc.).

  A clean install is a normal requirement, as no drivers are installed for the new hardware on the operating system.
  Thus, it will not start.

  How to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• PSAJOE satellite A300 - cannot remove the external HARD disc

  Hello

  I have portable adjustable 300 (PSAJOE).
  I can't remove the external hard drive (Toshiba USB2 {80 GB}).

  Whenever I try to remove the device it just hangs. I use windows vista Home premium.
  Flah interesting little player with 2 GB capicty works ok and easily removable by simple click.

  Help, please.
  Thank you
  Amer

  Hello

  Maybe you should first check if there is no access to all the files that are stored on external HARD drive

  I put t know how it works with your external HARD drive, but if I want to remove my HARD drive safely the new window opens and I get a USB mass storage device called option.

  If I mark this USB mass storage device and press STOP then a new window opens and I get 3 different devices;
  -USB mass storage device
  -Generic volume
  -USB HDD device

  If I score the first two options then my HARD drive crashes but if I choose the last of them then I can remove the HARD drive safely

• Replaced the portable hard drive, and I can't delete the EISA partition on original disk (which I want to reuse)

  I use a laptop 17 inch set that has two slots for drives 2.5 inch/9.5 mm, but it only came with a hard drive (in the primary).  I recently bought a 160 GB SSD and installed in the main Bay, by completely removing the original hard drive.  I installed Windows Vista Home Premium 32 - bit on my new SSD using my OEM Vista disc (as well as all pilots, maintenance SSD utility provided by its manufacturer, etc.), and it works beautifully.

  The secondary hard drive Bay was still empty, so I put my original hard drive (conventional spinning drives) return in this Bay. It was immediately found my BIOS and Windows, so I cut and pasted all the valuable data on my SSD (it is not many).  Then I deleted the main partition, for the purpose of releasing the entire disk for stuff like the music.

  Much to my dismay, the snap disk management in the utility included in Windows Vista computer management doesn't let me delete the EISA partition on my old hard drive. When I right click on the Visual representation of the partition, the only option I get is 'Help', 'Remove' or other useful functions (who did not appear for the main partition, and I was able to delete).

  I need the EISA partition because A) is not yet on my boot drive and B) I have all my original OEM recovery disks, and they are in excellent condition.

  If someone could tell me how I could delete the EISA partition on a hard drive formerly-primary but secondary now 111GB laptop to recover the last 9 GB for use by the illustrious Mozart and Tchaikovsky, I would be very grateful.

  I expect there to be a way to do this in Windows, I don't know, that's why I post here, but if not, I am willing to find and download an ISO to burn a disk Knoppix to start Linux temporarily just to delete the EISA partition (well I would really prefer not to do it for various reasons).

  I ended up downloading a free disk partitioning softpedia.com hard tool and he was able to delete the EISA partition without problem.  I then uninstalled the free tool I had just downloaded (honestly, I don't even remember the name of the program, but it was not hard to find in the list of hard disk utilities Softpedia search), and then used the disk management snap-in in the computer management utility to format the disk, which now has my music on it.

  I started this thread when I thought I was out of options, to quickly realize that some kind of solution could be obtained by downloading something from Softpedia, which was true.

  My apologies for taking up forum, but I hope someone in a similar situation finds this useful thread.

  Thank you very much!

  : D

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers

  try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers...

  I use a PC...

  Please check Adobe - Creative Suite 5 Master Collection: System requirements and try to install the product, please let us know if you are unable to activate. You can check: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,

  I hope this helps.

• How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

  I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

  The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

  http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

  Tom Ferguson

• HP Envy h8 - 1400z: lack the 2nd hard drive after windows update

  Discount Windows 8 for us solve a problem.  Before the update, I had two drives of 1 TB.  The first hard drive was for the OS C: and D: for the recovery partition.  The second disc has a partition called E: and has been used for data.

  After the update, I still have my partitions C: and D: as before on my first hard drive.   However, no D:.  Using disk management, the first hard disk is visible and it has C: and D:, as well as a few other partitions I do not recognize but appear to be associated with the update. Disk management does not show the second hard drive.

  Starting in UEFI shows the 2nd disc and it is recognized as a 1 TB drive and I have no reason to believe that the drive has failed.

  Did some research and see that others have lost a partition during the refresh, but the road is still visible in disk management.   Their problem is resolved by assigning a drive letter.  However, this does not work for me because the operating system does not see the drive.

  Is it possible that refresh changed my disks in raid 1?  How I check that?  Other thoughts on how I can get my drive back?

  Thanks for any help!

  Hi there @AVperson
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that after a cooling a HDD is no longer appears in disk management. I'm happy to help you.

  Since it does not appear in the BIOS but not in the operating system, let me start with a few BIOS tests on two hard drives. In fact, I suggest doing all the tests of material.

  I see no reason for a system spontaneously create a RAID where there were none before. If the system was a RAID on the second drive would be a mirror of the first, and it must always appear in disk management.

  After testing the system, you can always try remove the second disc and test it using a disk external drive bay on another device and see if it is readable.

  Let me know what you find.