Remove the Mobile (jqm) User Interface

Similar Questions

• Cannot open the file resource user interface

  Hi all

  I have to do an interview on a 2000 project (don't remember what version of the CVI was). I have 10 files IUR in the project and open all fine in the IDE, but one. I get the following message: "cannot open the Pnl_Main.uir user interface resource file (suddenly reached the end of the file).

  I've checked all my backup and they are all identical, so if there is a file corruption, he is old enough.

  In any case, here is the file, in case, can someone tell me what is wrong with him, or maybe open and re-record with an older CVI in case it's just a problem of version...

  
  

• Structure of the event without user interface

  I tried a quick and effective solution for a structure of event that is not a case of timeout and is part of a vi that has no user interface, but I have sent configuration data to the structure of the event.

  Let me be more clear: I have a camera that generates several events taken by a loop with the structure of the event inside.

  The provider of the camera give me this example of Labview code with all the events I'm interested and how they are implemented. I should mention that when you write a command of camera that a response to an event, but when you connect first to the camera there are more than 100 events generated by the latter, or when you download camera there are also several events. When there is no communication to the camera, the structure of the example event is inactive. The example includes a user interface to change settings and the program responds very well.

  I have to integrate this camera in great demand in which camera photo will be configured in a pragmatic way with number of the type of user interface in the example given by the manufacturer of the device.  First, I tried to design a loop with timeout cases in which a queue can send the data to the device setting configuration. Everything is good until the download when code needs to hold events in a certain way; in my case, an event is taken another goes to the time-out period and so on. After two sets of 100 images download, during the third round Labview gets blocked (Labview not responding) and I have to kill Labview. I got designer of the camera that if camera events are not taken they are kept on a pile and when the battery is full causes the Labview locked.

  Maybe I give too many details, but the question is: how to communicate with a struct event that is not a case of timeout and does not part of a user interface vi (it doesn't have a sign in my application)?

  Oops... Sorry about that.  I've attached an example what I'm talking about here.

  -Austin

• Deleting files from Archive CC - cannot remove the mobile creation error

  I am trying to clean my cloud storage because I have reached my limits, but it does not remove anything without having the error "failed to remove the mobile creation."  I get this error regardless of what file I'm trying to delete.  I don't know what it is or how to fix for free space on my drive of cloud.  Help, please!

  @nicoleb16277652 - you have a large number of items in the Archive tohttps://assets.adobe.com/files?filter=archive https://assets.adobe.com/files?filter=archive: 2355 files and 1 folder. I am currently getting a list of complete metadata that you have stored but didn't notice the Lightroom Catalog files. You should not use the current CC site for backup Lightroom catalogs.

  We can permanently delete all items in your Archive if that's what you want. Let us know what you would have done as. If necessary I can you email a complete list of what you have stored. My email is [email protected].

  Lightroom and Creative Cloud FAQ at https://helpx.adobe.com/lightroom/kb/lightroom-creative-cloud-faq.html#id_9994

  Can I keep my Lightroom Catalog in the 20 GB of storage space do I get with my membership creative cloud?

  No, you cannot store the Lightroom catalogs in the creative cloud, and you can save a Lightroom catalog on a network drive. You must store the Lightroom catalogs on your computer or on a hard drive connected locally.

• Adding custom flags to the TestStand UI user interface

  Hello! I'm sure this has been asked before, but I can't really find what I am looking for. I have a TestStand sequence that contains a stable loop cycle parts several times. I would like to show a pass fail count on each side on the user interface according to the current state of sequences (real-time). the parties can run 1000 times or more, and the UI should show the count for each + a LED to show if the component is always active.

  What is the best way to do something like that? The mail user interface? If so how do I set up the messages and have a counter for each share value? Each of the parties would have its own unique message?

  Thanks for any help you can give me. If you could provide a quick example.

  Bill

  Don't know what version of LabVIEW and TestStand, you have, but I threw together a little demo of what you want.  Just run the TopLevel.vi, then open the sequence in the zip file.

  Here in LV 2014 and 2014 TS.

  Kind regards

• Problem by removing the frontendCallback of user folder

  Hello

  I'm customizing my own reminder seq frontend and during application installation that copies to the Frontendcallback user folder (IE D:\Documents and Settings All Users\Documents\National Instruments\TestStand 4.2.1\Components\Callbacks\FrontEnd) it overrided the default reminder and worked well.

  and during the uninstallation am removing the frontend reminder of this place, but after deleting the files get "WINDOWS TRY TO CONFIGURE TESTSTAND" (see attachment) on opening the TestStand after deleting the messages callbacks.this continues until I have copy the frontend deleted in tht call fuser older.

  Why this is happening? any help to get rid of this?

  Thank you

  Biki

  This is caused by the frontendcallbacks.seq file is missing.  The Setup program detects that a component is not properly installed (in this case, the frontendcallbacks.seq file) and attempts to repair by re-running the installer.

  However, the installation program is not properly designed to take into account your ability to edit or even delete this file.  Question #257564 was created to fix this in a future version of TestStand.  However, until the installer has been changed, the only way to avoid this is to have a file with the name frontendcallbacks.seq to this place.  I would say on uninstall handing the default file in place to avoid this problem.  I apologize for the inconvenience.

  -Allen P

  NEITHER

• How can you write a time interval in the timer for User Interface?

  Use a timer on a control panel, that triggers a callback function to the sample data.  I would like to read a digital input from the user interface panel and then set this value in the interval of the timer.  But how do you write the interval of timer?  Obvious function doesn't seem to work,

  SetCtrlVal (panelHandle, PANEL_TIMER, %SAMPLESECONDS%);

  Probably the best place to start is with the help of high level for the control that you are interested in.   I usually just to go to the index tab in help, start typing the name of the control (timer in this case) and then choose the top level help topic.  From here, you can see the attributes that you can use the events you can capture, programming concepts, etc.

  

  NickB

  National Instruments

• Event ID: 637 is not triggered after you remove the remote desktop user

  Hello

  Suddenly, three of the users to the remote desktop users group has been removed, but I'm not able to find the event: 637 in the security event log.  However, I got a test to remove a user from the remote desktop users group, but the event id: 637 has triggered and found.

  I need to check what the user has been deleted?

  Thank you
  Yasser

  Hi Yasir,

  Thanks for keeping us posted and share this information with us.

  I would have you post your query in the TechNet Forums.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• How to remove the password of user on Portege M HARD drive

  Hi, is it possible to remove the HARD drive password after recording a? If so, how?

  Hello

  Check it please this document http://support.toshiba-tro.de/kb0/TSB6301F90006R01.htm

  I know, HARD drive password cannot be removed and if so, do you really think that will be released this information to the public. ;)

• remove the old registered user or name of the owner for this operating system

  I would like to remove the old name of the owner of the operating system of my computer and update the info with my own.

  With a used computer, regardless of its origin, recommended is to do a clean/Windows factory restore install. If you don't want to do it (not recommended), you can change the owner registered as follows:

  How Do I Change The registered owner name in Windows Vista - http://vistasupport.mvps.org/change_registered_owner_name.htm
  MS - MVP - Elephant Boy computers - don't panic!

• How can I remove the administrator in users and groups

  I give my MacBook to a family member.  I just upgraded to El Capitan.

  I opened system preferences > users and groups > and added my brother as a new user and administrator.  I was unable to remove me as an administrator, and now I can't stop computer without getting the warning "stop can cause other users connected to this computer to lose unsaved changes."  If I switch to the user the same message appears then try to stop.

  Help please

  What to do before you sell or give away your Mac - Apple Support

• Remove the log-in user

  We have two users on one single computer, two separate log-ins, how can I remove one of the users, all have two access it administration.

  This article describes how to add and remove accounts:

  "How to create and configure user accounts in Windows XP"
    <>http://support.Microsoft.com/kb/279783 >

  HTH,
  JW

• development tool for the blackberry application user interface

  Hello

  I have recently started the development of blackberry and I have good experience for other mobile platforms.

  For UI design, I couldn't find any tool. Is there a tool available to design the UI drag-and - drop controls. or I have to create all the item the user by writing code.

  Please, share your ideas with me.

  Thank you

  Aktaion.

  Hello

  Guidelines

• Remove the obstruction, [new user]

  Imgur:
  

  Want to remove that "press key" I'm a new user, create a tutorial and got some knowledge to do what I need. Also how to exist Adobe Capitavate 9 perfectly, if I click esc esc does not meet the Adobe but rather the web browser?

  Thank you for your help, I got it. Once you are about to start recording CLICK settings, click record on the left, click mode then uncheck the 'add text captions.

  Thanks Mr.RodWard

• How to remove the oracle application user?

  Hi experts,
  
  
  How can I make user oracle application? I know only two options to lock and abandon backend as removing ro in fnd_users
  
  What is recommecnde? Please give the right way. "
  
  Thanks and greetings '
  VD

  Hello

  It's not a bug, user application records can be referenced in the databases/applications and their deletion would cause referential integrity problems.

  Kind regards
  Hussein