KERNEL_DATA_INPAGE_ERROR?

Similar Questions

• Kernel_Data_Inpage_Error error blue screen

  Original title: recently, our PC had blue screen errors

  We have tried to update the BIOS, but we always get the Kernel_Data_Inpage_Error.  What else can we try?

  Hello

  1. are you able to boot to the desktop?

  2. when exactly you get this blue screen error?

  When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

  For more information on the reading of the memory dump files, see the following article:

  How read partial memory dump files that Windows creates for debugging

  Resolution:

  Error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.

  Use the check disk command for all errors on the hard drive.

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

  Use the drive control as follows:

  (a) click Start.

  (b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".

  (c) type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.

  (d) then type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.

  NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  You can check the link below for more details - mentioned
  http://msdn.Microsoft.com/en-us/library/ms793989.aspx

• KERNEL_DATA_INPAGE_ERROR message

  Recently I was away for two weeks and my system was closed all the time.  My system was working fine when I left.  No software or hardware has been added.  Nothing has changed.  When I came back, I started getting the following message with a BSOD: KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A (0xC0000185, 0 x 80572092, 0xC0402B90, 0x18F08860).  I have unplugged everything except the monitor, keyboard and mouse, but the problem remains.  No idea how to solve this problem?

  Not without more information.  Well... no good ideas.

  Your system is a Compaq Presario V4440 or is it a gateway FX6803?

  Are you running XP Professional SP2?

  is your antivirus/antimalware currently Norton or McAfee?

  Here are some ideas of an engineer of Microsoft Support previously marked as 'response' - see how these things work for you:

  Step A.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  See the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Step B.
  You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us

  Step C: make SFC scan on the computer.
  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:
  sfc/scannow

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Please note that if the idea of the engineer of Microsoft Support for try sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.

  Until 14, I'm zero dollar.

• There are a couple of weeks, I started to meet the BSOD with KERNEL_DATA_INPAGE_ERROR.

  Original title: KERNEL_DATA_INPAGE_ERROR

  Well a few weeks earlier, soon as I bought this new computer, I started to meet the BSOD with KERNEL_DATA_INPAGE_ERROR. I am running Windows 7 on a laptop Asus G60JX. Not long after the first time it happened, I looked at the problem and ran a disk check to find only my computer would start is more upward. I decided to reformat my computer and everything worked well again for about 2 weeks and now it is happening again. My computer starts well but every once in a while the mouse will stop working and it will go to the BSOD and say something on the dumping of physical memory. When I start my computer upward, it says this area solution, or whatever.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 7A
  BCP1: 0000000000000020
  BCP2: FFFFFFFFC000009D
  BCP3: FFFFFA800719E7C8
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\070610-16957-01.dmp
  C:\Users\Spencer\AppData\Local\Temp\WER-58999-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Any help would be appreciated. Thank you.

  You said Details of the bugcheck 0x7a - KERNEL_DATA_INPAGE_ERROR - "this bug check indicates that the data page of the kernel of the required paging file cannot be read in memory."  It is usually an indication of a failing drive.  Error code was met was "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or loose, termination or that the controller does not see the hard drive."

  However, you can check "you receive various Stop in Windows 7 or in Windows Server 2008 R2 error messages when you try to resume a computer that has a large hard drive SATA" and see if the fix applies to you.

• KERNEL_DATA_INPAGE_ERROR Stop: 0x0000007A (0xc0403bc8, 0xc000000E, 0xZC895860, 0 x 80779000) Storport.sys - address 80779000 base at 80744000. 49e01ef7 datestamp.

  I had this problem with my computer, running Windows Vista Home Premium 32 bit, for several months now, where it will show the blue screen of death shows the error message above. It will be at random times, it seems to just freeze and sit there for a few minutes and then display the error message. I tried chkdsk, System Restore, defragment the HARD disk, running analysis antivirus/antispyware, security scans, check the registry errors, have all the updates and everything I can think of nothing. I saved some of the previous error messages that he brang upward in the same way if they can help with what either.

  * [date - 16/06/09; 8:00p.m.] KERNAL_DATA_INPAGE_ERROR
  Stop: 0x0000007A (0xC0415BBO, 0x000000E, 0x35AED860, 0x82B76000)
  Storport.sys - address 82B 76000 based B 82, 41000, Datestamp 49e01ef7.

  * [day - 17/06/09] Stop: 0x0000007A (0xC000000E, 0x259268C0, 0xC0438A40, 0x87148EC4)

  * DRIVER_STATE_POWER_FAILURE
  Stop: 0 x 00000095 (0 x 00000003, 0x83AD8B70, 0x8560D2B0, 0 x 84417808)

  * [day - 27/08/09] DRIVER_STATE_POWER_FAILURE
  Stop: 0x0000009F (0 x 00000003, 0x8611E030, 0x8611E030, 0xAS09E5B8)

  Pura9910

  Hello

  If a PC you can try reseating all the memory cards and cables (both ends) - are not just tight - actually remove
  and replace. Remove ALL power before opening the case.

  95 is a Plug n not specified ' error to play and no help.

  9F is usually power associated - powersupply thouugh, there might be question of device or driver and antivirus related.

  7A

  Cause

  Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:

  • 0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.
  • 0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.
  • 0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.
  • 0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.
  • 0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.

  These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see the Ntstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).

  Another common cause of this error message is the defective material or failing RAM.

  A virus infection can also cause this bug check.

  Solve the problem

  Solve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.

  If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  Warning  If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  Solve a defective hardware problem: If the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.

  Solve a problem RAM failure: Run the hardware diagnostics feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.

  Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  Check the system log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.

  Make sure that the latest Windows Service Pack is installed.

  If the previous steps do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.

  Solve an infection by the virus: Search your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  --------------------------------------------------------------------------

  It's my generic bluescreen convenience store which may help.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Blue screen 64-bit Vista - 0x7a-KERNEL_DATA_INPAGE_ERROR

  original title: 64-bit Vista of death blue screen

  I started to have blue screen errors.  I received a couple but 4 different ones.  One I have and I got different eras has been STOP: 0x000000F4 and that's all that I've got ACE for this one at a time.  He began by the freezing of my office and remained frozen for a few minutes until it gave me the blue screen.  I restarted went without failure then normal mode and it kept working for quite some time.

  Then he kept the freeze again.  Then he gave me

  KERNEL_DATA_INPAGE_ERROR memory options disable BIOS such as implementing caching or shading.  0x0000007A (0xFFFFFFFFC0000056, 0 x 0000000086509860, 0xFFFFF6FD30009778, 0xFFFFFA60012EF244)

  So I rebooted again and there once again in safe mode and back to normal.

  So I kept trying to see if my PC kept working.  Because I didn't have from time to time to post how I continued to use it as he continued to work.  Then it froze again and gave me

  STOP: c000021a {fatal system error} the initial session of the system or process ended unexpectedly with status 0x00000000 (0xC0000056, 0 x 00100500) the system has been turned off.

  So this time he send me to the Startup Repair and after trying to find a solution for a while, he couldn't fix and tried to allow me to restore but restore was not successful and gave me.

  StartRep.exe - Application Error

  The statement to the 0x7779b49e referenced memory at 0xff7f2f78.  Required data has not been placed in memory because of an error of e/s of 0xc0000185 status.  CLICK ON OK TO TERMINATE THE PROGRAM.

  So I keep on going and finally at some point it allows to restore only to give me another simialar to a previous error.

  STOP: 0X0000007A (0XFFFFFFFFC0000056, 0X000000002425E860, 0XFFFFF6FD30019408, 0XFFFFFA60032810EC)

  Oh Yes (EDIT) at some point during one of the Security Modes it froze and let nothing happen. Just thought I would add in it.

  Sorry it's a little long but any help or info would be appreciated.  I clean my registry and it kept my computer goes about a week before this last error.  Does not do anything for it since.  The only thing I could think that I installed because it started happening was Norton Internet Security 2011 but at the time I don't think it was a big deal, so do not know how long after or before there was that I installed and started having some bluescreens.

  All my drivers are up to date for.

  A little info extra snacks on the PC.

  OS 64 bit Vista Home premium

  Intel core 2 quad cpu q8200

  Processor speed - 2.33 ghz

  system memory - 4 GB

  Gateway model desktop sx2800

  Thanks in advance.

  Hello

  Nothing is 100% until you find the cause, sure seems like hard drive. Read the link below.

  More general fix is updated to the drivers, BIOS and chipset and different control software. Also
  check the wiring on the hard drive.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  BCCode: 7A 0x0000007A<-- read="" this="">
  * 1137.html? order = votes http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-

  I hope this helps.

• disk KERNEL_DATA_INPAGE_ERROR error &amp; non-system but everything works OK for a while

  Hello

  can someone please help me because I have a deadline Coming up and need of my laptop works properly!

  I have windows 7 64 bit running on an HP ProBook 6550 b. My PC works fine for about an hour, after an hour, the screen freezes for 10 seconds and then I get the KERNEL_DATA_INPAGE_ERROR. It reboots and then I get the message "Non-system disk or disk error."

  So I just shut down my PC and pitch up and everything works perfectly fine again for about 45 minutes. Then the same problem again.

  I tried several things. I run a chkdsk /f /r it find some issues. I tried and followed some knowledge how to change the paging file settings. I ran a memtest. No error with the memtest.

  Finally, I went into the BIOS and I did a test drive HP. It has almost immediately, but I can just close the BIOS and boot my PC and windows works fine.

  What can I do to fix this other then buying a new hard drive. (I intend to buy a new laptop anyway in a few months after that I spent my time and trial period is over. "(Mais à court terme j'ai vraiment besoin cela fonctionne)."

  Thank you very much!!

  Johan

  Just in case someone else encounters this.

  The problem was due to my hard drive SSD M4. There was a problem with the firmware causing crashes time after that the disk has been used for several hours then +-5200. The firmware upgrade fixed it for me.

• The code of error BSOD 0x0000007a: KERNEL_DATA_INPAGE_ERROR.

  Original title: 30 + hours of chkdsk on a hard disk of 1 TB and no indication of progress

  Have an ASUS PC (care not available at this time).  Home work to discover has recovered from a blue screen crash.  The code indicates anything a Windows software for a chip failure problem RAM or motherboard.

  Decided to check the disc with recovery of bad sectors option.  It has been approximately 30hrs and all I have is a blinking on-screen cursor: no indication of text on what is happening or what stage it is during the process.  It's an old PC with a 1 TB hard drive.  Don't know mghz speed but the processor is powerful enough to play in the COD, Skyrim and other games.

  Any recommendations would be greatly appreciated. Thank you in advance.

  Hello

  Sorry for the late reply.

  According to the newspapers of file dump, error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.

  If the problem persists, try the methods provided in the link below:

  Resolution in Windows 7 stop errors (blue screen) .

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Please let us know the status of the issue so that we can help you further.

• KERNEL_DATA_INPAGE_ERROR then CRITICAL_OBJECT_TERMINATION

  I rarely post on a Web site because I can generally understand the answer, but this one really got me.  I had 2 BSOD.  The KERNEL_DATA_INPAGE_ERROR on 10/04/13 then the CRITICAL_OBJECT_TERMINATION 04 12, 13.  Yesterday, I got both of them 10 minutes apart.

  It is a brand new system installed at the beginning of February, which has had a hard drive failure, so I bought a new drive and installed Win 7 3/20/13.   Any help is greatly appreciated!

  https://DL.dropboxusercontent.com/u/4504718/041013-24476-01.dmp
  https://DL.dropboxusercontent.com/u/4504718/041213-24102-01.dmp

  This is the result I got from WinDbg.

  Microsoft (R) Windows debug 6.2.9200.20512 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\041013-24476-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * your local folder for symbols * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7601.18044.amd64fre.win7sp1_gdr.130104 - 1431
  Computer name:
  Kernel base = 0xfffff800 '02c0c000 PsLoadedModuleList = 0xfffff800' 02e50670
  The debugging session: 17:34:08.826 Wed 10 April 2013 (UTC - 04:00)
  System Uptime: 0 days 4:53:58.122
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .............................
  Loading user symbols
  Loading unloaded module list
  ...................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  7 has error checking, {fffff6fc50029768, ffffffffc000000e, 215018880, fffff8a0052ed340}

  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 36c1a)

  Follow-up: MachineOwner
  ---------

  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: fffff6fc50029768, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc000000e, error state (state code of e/s normally)
  Arg3: 0000000215018880, current process (virtual address for the lock type 3 or PTE)
  Arg4: fffff8a0052ed340, virtual address that could not be paged in (or PTE contents if arg1 is a PTE address)

  Debugging information:
  ------------------

  Error_code: (NTSTATUS) 0xc000000e - a device which does not exist was specified.

  DISK_HARDWARE_ERROR: Error occurred with disc material

  BUGCHECK_STR: 0x7a_c000000e

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  DEVICE_OBJECT: fffffa800809d000

  TRAP_FRAME: fffff880035d5500-(.trap 0xfffff880035d5500)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff8a0052ed340 rbx = 0000000000000000 rcx = fffff8a0052da9e0
  RDX = fffffa80066b9de0 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff80002c98d5a rsp = fffff880035d5690 rbp = fffff80002ebda00
  R8 = fffff880035d5838 r9 = fffff880035d5840 = 0000000000000000 r10
  R11 = fffff880035d58b8 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  NT! MmMapViewInSystemCache + 0x3a:
  fffff800 '02c98d5a 4c8b20 mov r12, qword ptr [rax] ds:fffff8a0' 052ed340 = ffffffffffffffff
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80002cf4812 to fffff80002c81c40

  STACK_TEXT:
  "fffff880 '035d51e8 fffff800' 02cf4812: 00000000' 0000007 a fffff6fc ' 50029768 ffffffff c000000e ' 00000002'15018880: nt! KeBugCheckEx
  "fffff880 '035d51f0 fffff800' 02ca8a0f: fffffa80 ' 0d5fae00 fffff880 ' 035 d 5360 fffff800 ' 02ebd600 fffffa80 ' 0d5fae00: nt! : FNODOBFM: 'string' + 0x36c1a
  fffff880 '035d52d0 fffff800' 02c8f2a9: 00000000'00000000 00000000'00000000 ffffffff 'ffffffff fffff880' 016c8c14: nt! MiIssueHardFault + 0x28b
  "fffff880 '035d53a0 fffff800' 02c7fd6e: 00000000 ' fffff8a0 00000000 ' 052ed340 fffff880 '00000000 fffff880' 031d 7830: nt! MmAccessFault + 0 x 1399
  "fffff880 ' 035 d 5500 fffff800 ' 02c98d5a: fffffa80 00000000 00000001" 00000001 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e
  fffff880 '035 d 5690 fffff800' 02c 98127: fffff880 ' 035d5cb0 fffff880 '031 d 7830 fffff880' 035d 5838 fffffa80 ' 0b21c320: nt! MmMapViewInSystemCache + 0x3a
  "fffff880 ' 035 d 5800 fffff800 ' 02c9708f: fffffa80'00000000 00000000'00000048 00000000'00000000 00000000'00000000: nt! CcGetVacbMiss + 0 x 177
  "fffff880 '035d58c0 fffff800' 02caa0b6: fffffa80 ' 00000000 00000000'00000048 fffff880 ' 035d59a8 fffff880'035 d 5988: nt! CcGetVirtualAddress + 0x2e0
  "fffff880 ' 035 d 5950 fffff800 ' 02caa734: fffffa80'093f5910 fffffa80 '067b 7000 fffff880' 035d5a90 00000000' 0000ff78: nt! CcMapAndCopyInToCache + 0 x 146
  "fffff880 '035d5a40 fffff880' 01625eb6: 00000000 ' fffff880 00000000 '035d5cb0 fffffa80' 0a0aeb00 fffffa80 ' 0a0aeb00: nt! CcCopyWrite + 0 x 194
  fffff880'035d5ad0 fffff880'01626463: fffffa80 ' 0a0aeb00 fffffa80 '0809cc60 fffff880' 035d5c01 fffff880 ' 035d5c00: Ntfs! NtfsCommonWrite + 0 x 3390
  fffff880 '035d5c80 fffff880' 0114bbcf: fffffa80'0809cfb8 fffffa80 '0809cc60 fffffa80' 09ddcbb0 00000000 00000001': Ntfs! NtfsFsdWrite + 0x1c3
  "fffff880 '035d5d40 fffff880' 0114a6df: fffffa80'076018f0 00000000 00000001' fffffa80 ' 07601800 fffffa80 ' 0809cc60: fltmgr! FltpLegacyProcessingAfterPreCallbacksCompleted + 0x24f
  fffff880 '035d5dd0 fffff800' 02f8de0b: 00000000 00000001' fffffa80 '093916a 0 00000000 00000001' fffffa80' 0809cc60: fltmgr! FltpDispatch + 0xcf
  "fffff880 '035d5e30 fffff800' 02f98803: fffffa80 ' 0809 d 000 00000000 00000000' fffffa80 ' 093916a 0 fffff880'031 d 7180: nt! IopSynchronousServiceTail + 0xfb
  fffff880 '035d5ea0 fffff800' 02c80ed3: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! NtWriteFile + 0x7e2
  fffff880 '035d5fa0 fffff800' 02c7d490: fffff800 ' 02eec693 fffffa80 '0674d3c0 fffffa80' 0a07c310 fffffa80 ' 067b 7000: nt! KiSystemServiceCopyEnd + 0x13
  fffff880 '035d61a8 fffff800' 02eec693: fffffa80 ' 0674d3c0 fffffa80 '0a07c310 fffffa80' 067b 7000 fffff800 ' 02fcda03: nt! KiServiceLinkage
  fffff880 '035d61b0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! EtwpRealtimeSaveBuffer + 0 x 93

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'string' + 36c1a
  fffff800'02cf4812 cc int 3

  SYMBOL_STACK_INDEX: 1

  SYMBOL_NAME: nt! : FNODOBFM: 'string' + 36c1a

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 50e79935

  FAILURE_BUCKET_ID: X64_0x7a_c000000e_nt! _ ?? _::FNODOBFM:_string_ + 36c1a

  BUCKET_ID: X64_0x7a_c000000e_nt! _ ?? _::FNODOBFM:_string_ + 36c1a

  Follow-up: MachineOwner
  ---------

  I know that it is basically a year later, but I understood the problem and that you wanted to post a reply.  As part of my solution to prevent other disk hard breaks down ruining the system I've set up a mirror of RAID hard drive.  I proceeded to install windows and the RAID broke immediately.  After several attempts to rebuild the RAID and reproduce the problem, at one point one of the hard drives started clicking.  I was seriously confused, but concluded that the only possible cause for such ridiculous behavior could be the power supply.  Keep in mind, I swapped the SATA cables and used different SATA power connectors.

  After replacing the power supply the problem has not happened since.

• Blue kernel_data_inpage_error error screen HELP Please

  Should I be worried that I came to my PC after that leaving locked during the night and found the following error blue screen:

  KERNEL_DATA_INPAGE_ERROR

  STOP: 0X0000007A (0XC000000E, 0 X 92188860, 0XC041AD60, 0X835ACD7E)

  Igdkmd32.sys address 921B 8860 base @ 91E09000, Datestamp 646496 4 d

  ataport.sys address 835ACD7E base @ 83597000, Datestamp 4ce788e8

  He started very well after that I forced to shut down, but I can't afford to crash like that again in the workplace and I regularly have to lock / unlock my computer because of privacy laws. I read that it might have to do with the hard drive.

  Any comfort would be great, thanks for your help!

  Hello

  When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

  For more information on the reading of the memory dump files, see the following article:

  How read partial memory dump files that Windows creates for debugging

  See use SkyDrive to upload collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  We usually get the error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A if the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.

  Error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A indicates that the data page of the kernel of the required paging file could not be read into memory. It seems that there are some problems with the hard drive.

  Use check disk command to all the errors on the hard disk:

  Use the drive control as follows:

  un) Click start.

  ( b) in the search window type 'cmd' and ENTRY. Right-click and select 'Run as administrator'.

  c) Type on the command line and press ENTER to scan the driveCHKDSK/p .

  d) then typeCHKDSK C: /F /Rand press ENTER to repair corrupt sectors if there is.

  NOTE:

  The root of the drive should be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  You can check the link below for more details - mentioned
  http://msdn.Microsoft.com/en-us/library/ms793989.aspx

   

   

   

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using the disk check

  For more information, see the link.

   

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  WARNING: System Image backup

   

  When you restore your computer from a system image, the contents of your hard drive is replaced with the contents of the system image. This means that any changes you made, you have it installed, or you saved after the creation of the image of the file system will be probably lost, unless you have a recent backup of your data.

   

• BSOD - Kernel_data_inpage_error 0x0000007a

  The error is (0xc0203764, 0xc000000E, 0x22605BEO, 0x80DD9000).  Quickbooks 2009 and Windows 7 install updates automatically.  No other hardware or software changes have been made recently.  Had nothing on the monitor, restarted (power off and then on) then computer windows normally and ran chkdsk.  Then blue screen, as described case again, crashed.  Started in safe mode, try to scan virus (Norton 360), but did not want to start scan.  Help!

  Control bug 0x7A: KERNEL_DATA_INPAGE_ERROR with errorSTATUS_NO_SUCH_DEVICE (0xc000000E). Check the cables of your HARD drive. Also check the HARD drive with a diagnostic tool for manufacturing.
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• BSOD KERNEL_DATA_INPAGE_ERROR

  My windows 8 crashes with the error KERNEL_DATA_IN PAGE_ERROR.  Any help with the mini dump file analysis?

  Dump files and the information system are compressed here...   https://www.dropbox.com/s/dh9tqmzmh5ofo7y/files.rar?DL=0

  Hello

  Error checking 7A, {4, 0, fffffa800476dd60, 64c43a2e30}

  Probably caused by: ntkrnlmp.exe (nt! FNODOBFM: 'string' + 246f4)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  1. if you're overclocking anything STOP!

  2. check with HP Support, their drivers and documentation online and ask questions in the forums about known problems. Update the BIOS, chipset drivers and major
  device drivers embedded and separate (see methods of updating driver below).

  BiosVersion = F.26
  BiosReleaseDate = 03/06/2014
  SystemManufacturer = Hewlett-Packard
  SystemProductName = HP Pavilion Notebook PC g6
  Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
  SystemVersion = 087C 110014385910000620120
  SystemSKU = C7N61UAR #ABA
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 183F
  BaseBoardVersion = 56.32

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  3 carefully check for malware (see next answer).

  4 use all other methods in the troubleshooters below if necessary.

  5 if necessary run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier
  methods below).

  ====================================================

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  ========================================================

  Do you use a SSD? Or RAID? Check "EVERYTHING" on the hard drive, controller and wiring (from the discontinuation of ALL power first).

  -----------------------------------------------------------------------------------------------

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  ========================================================

  
  BCCode: 7A 0x0000007A

  The main causes of this error are virus/malware, drivers, memory, and disk damage. And it may even be combinations of those so meticulous control of all is necessary. Added the possible causes are clerical errors such as the motherboard damaged or other materials.

  BCCode: 7A 0x0000007A

  BCCode: 7A 0x0000007A<-- read="" this="" link="" read="" this="">
  * 1137.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-

  Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR<-- read="" this="">
  http://msdn.Microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx

  See also - control bug 0x77 (KERNEL_STACK_INPAGE_ERROR)

  ------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updated all the drivers and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - VIEW driver Microsoft set hide - update those without drain in their names (and the BIOS and chipset drivers).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  How do I Run the diagnosis of memory Windows 7 (and 8) - in Windows 8 the
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Help, please! KERNEL_DATA_INPAGE_ERROR restart blue screen

  Hello

  I've known the KERNEL_DATA_INPAGE_ERROR blue screen which causes reboot at random times when I use my computer. I tried a number of options and have been in contact with a number of Microsoft employees to try to solve this problem, but so far nothing has worked. Here is a list of whathas was made up here, but all to no success. These actions are without particular chronological order:

  Ran CHKDSK /R in command prompt

  CHKDSK ran sfc and dism in command prompt

  A ran CHKDSK/X/r/f in the Safe Mode command prompt

  A ran CHKDSK /F /R in Safe Mode command prompt

  Analyses with HitmanPro, ESET, Norton and Malwarebytes

  A run MSDT while with the Microsoft Staff

  Update various drivers

  Convenience of Ran with Microsoft staff

  Finally, I performed the update on my PC, but little time action after I did, I had projected again blue.

  My OS was 8.1, now demoted to 8 since I refreshed.

  I'm ready to remove and reinstall windows as a last resort if nothing else can be done, if that would solve the question. I appreciate the help that can be given.

  Kind regards

  Josh

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here
  If you have any questions regarding the procedure, please ask

• Windows 8: get randomly BSOD kernel_data_inpage_error

  Hi Microsoft community. The laptop that I use an Asus F501A with Windows 8 (not 8.1 as the download of the update always gives an error), randomly gives a BSOD with a "kernel_data_inpage_error". When people ask me to use chkdsk I do, but the problem is still there.

  Where should I start to solve this problem?

  Thank you!

  All attached files of the DMP are (7A) KERNEL_DATA_INPAGE_ERROR bug check.

  This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.

  7 has error checking, {4, 0, fffffa8006e836c0, fffff8a009891980}

  -ERROR_CODE: (NTSTATUS) 0 - STATUS_WAIT_0

  ---------------

  You have two suites antivirus installed, is to create conflicts and causing memory corruption.

  Remove and replace Avira and Windows Defender in Windows 8 integrated McAfee for temporary troubleshooting purposes:

  Avira - removal http://www.Avira.com/en/support-for-home-Knowledgebase-detail/kbid/88

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Kind regards

  Patrick

• KERNEL_DATA_INPAGE_ERROR Windows 8

  About 4 days ago I started having the dreaded BSOD. The error I get is KERNEL_DATA_INPAGE_ERROR. I get the error very often, and that's annoying, while I'm doing projects. Here's what I got from BlueScreenView:

  ==================================================
  Dump file: 113015-36593 - 01.dmp
  Crash time: 30/11/2015-16:51:49
  Bug Check String: KERNEL_DATA_INPAGE_ERROR
  Bug check code: 0x0000007a
  Parameter 1: 00000000'00000004
  Parameter 2: 00000000'00000000
  Parameter 3: fffffa80'060d09a0
  Parameter 4: 000000fa'd5e04a70
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + b 7, 040
  Description of the file:
  Product name:
  Company:
  Version of the file:
  CPU: x 64
  Plant address: ntoskrnl.exe + b 7, 040
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\WINDOWS\Minidump\113015-36593-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 9200
  Size of the dump file: 287 336
  Dump of file time: 30/11/2015-16:53:21
  ====================================================================================================
  Dump file: 113015-42265 - 01.dmp
  Crash time: 30/11/2015-07:44:39
  Bug Check String: KERNEL_DATA_INPAGE_ERROR
  Bug check code: 0x0000007a
  Parameter 1: 00000000'00000004
  Parameter 2: 00000000'00000000
  Parameter 3: fffffa80'06bb3e30
  Parameter 4: 00000000' 09aa99ba
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + b 7, 040
  Description of the file:
  Product name:
  Company:
  Version of the file:
  CPU: x 64
  Plant address: ntoskrnl.exe + b 7, 040
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\WINDOWS\Minidump\113015-42265-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 9200
  Size of the dump file: 290 376
  Dump of file time: 30/11/2015-07:47:04
  ==================================================

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting the blue screen of death on your system Windows 8.

  The KERNEL_DATA_INPAGE_ERROR STOP error code: 0x0000007A indicates that the data page of the kernel of the required paging file cannot be read into memory. It could have happened due to graphics card drivers.

  I suggest you follow these methods to solve the problem related to the error message and check.

  Method 1:

  I suggest to update the graphics drivers and check for the issue.

  Follow these steps to update the graphics drivers.

  a. press the Windows key + X , and then select Device Manager.

  b. search for graphics cards and expand it.

  c. right-click on the display driver and select Update driver software.

  Method 2:

  I suggest you to check and install all the latest Windows updates.

  Follow these steps.

  a. press the Windows key + W and type Windows updates.

  b. Select Check for Updates which will display a list of all the recent updates, those who must be installed on the computer, and then you can install them.

  c. press the Windows key + W and type Windows updates.

  d. Select install optional updates , then the updates.

  e. now wait for a while when Windows checks for the latest updates for your PC.

  f. If updates are found, tap or click install updates.

  Method 3:

  I suggest you to use the Microsoft Security scanner for the show and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: During the scan of the hard drive if bad sectors are found, the scanner tries to fix this sector, all available on which data may be lost

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.