Similar Questions

• How to remove a computer from my working group under XP and Windows 7?

  We have recently implemented a network composed of our three computers (2 XP) Home Office and 1 Windows 7 to share files and printers.

  However, we found its malfunction and could not share what we expect.  One of the reasons, we can see it, could be one of the computers have been infected.

  So, we try to remove this computer from the working group.

  However, no matter how hard I searched on Internet, there is no way to remove the infected computer's existing working group.

  There that experts can help us?

  Thank you very much!

  Hello

  You cannot remove a computer from a working group, but you can change the name of the working group.

  http://support.Microsoft.com/kb/295017

  http://www.SevenForums.com/tutorials/51711-workgroup-name-view-change.html

  But that will not necessarily mean that they are not accessible by other computers on the network, or it will necessarily make the other less likely to be infected through this PC computers.

  The only way to "withdrawal" of a computer on a network is to unplug the network cable or remove the name of the wireless network.

  If you are concerned about a possible infection, you must get the malware to day and scan for malware protection.

  However, I suspect it's more likley your problems are caused by the lack of knowledge in the topic network different Windows operating system. This can help...

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  If you are having specific problems post back with details and someone will almost certainly try to help.

  Tricky

• How to remove the Working Group?

  How can I delete a group to work on Vista, I've created? I don't want to change the name of the working group. I want to remove it completely from my computer. Is this possible?
  Help, please.

  Hello, RajD1

  Just make sure each other the correspondence of name of working group on both machines, there is no way to remove/uninstall. Is the corresponding name and makes things easier, or it doesn't.

  The following link useful information on how to get your Windows Vista and Windows XP machines talk to each other: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/a9a03050-cc02-4a0c-a7d2-56800b8fbcab

  If you just need the XP machine is displayed in the Vista network map, see: http://support.microsoft.com/kb/922120

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Series quick reading of the channel group properties

  Hi, can someone please advice what is the fastest way to extract about 400,000 files channel group properties? Currently I use DataFileLoadRed with only the Group of channels that interests me and channels stripped down to a single value by setting the no. intervals of 1 and SectionBegin / end of 1/2. Suggestions for improvements? PHEX

  An alternative would be to open all files with the following code.

  Option Explicit
  
  dim groupindex : groupIndex = 1 ' you can also use a groupname instead
  dim groupProperty : groupProperty = "description"
  
  ' include this in a loop over all your files
  dim filePath : filePath = "C:\temp\example.tdm"
  dim store : set store = navigator.ConnectDataStoreByParameter("TDM", ""& replace(filePath, "&", "&") & "")
  dim propVal : propVal = store.RootElements(1).Children(groupindex).Properties(groupProperty).Value
  MsgBox propVal
  

  The files are open and your properties are extracted. Potentailly datafinder approach should be more fast but if you don't get that market this may be a way out.

• Try to remove the channel Weather Office.

  I can't delete weather channel desktop content with programs and uninstall.

  I looked at many options to remove on - line. All most of them take me through 'my computer' and then 'hard disk' then opening weather channel folder. Then I received instruction to find [UNWARY. [EXE] which I can't find.

  Help, please

  John

  Try this.
   
  Revo Uninstaller
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

   

• Cannot remove the disk group

  Unable to identify the virtual SAN performance statistics in the vSphere Client Web UI.

  Use observers VSAN of RVC for monitoring and collecting depth for Virtual SAN performance indicators. VSphere Web Client is not currently able to view the performance counters for virtual SAN.

  Observer VSAN

  Launch the VSAN observer to start to accumulate performance indicators. Type the command "vsan.observer ~/computers/- runwebserver - force" to start the tool, use a modern web browser and access the portal of metrology. VSAN observer provides an in-depth analysis of the performance of layer of physical disks in Virtual SAN, cache hit rate, latency, etc.

• compare files with the same structure of channel / rename channel(-groups)

  Hello

  I have several groups ch with many channels in the file of each measure.

  Now, I need to display/compare Channels 2 or more files of measures in a chart. (channel 'speed1' to the file 'measurement1' vs 'speed1' to the file 'GCA2' channel)

  So I import 2 files in the browser und have the same structure of string twice. To distinguish between the channels of the two files I want to rename the channels by script and add the file name of the channel-group name.

  Is this a common way to compare measurement data in files with the same channel names and structures?

  In the affirmative. How can I make a script?

  Thank you very much in advance!

  Ski

  Hi Ski-Fahrer,

  each channel has a name of the institution.

  Data.Root.ChannelGroups ("Name" or Index). Channels (Index or "Name"). Name

  You can assign a new name like this:... Name = "NouvNom".

  I don't think it is necessary to rename the channels. If you do not forget the files. If you want to rename something I only rename the ChannelGroups by adding a date or a serial number.

  Kind regards

  Philipp K.

  AE | NOR-Germany

• How can I remove the homegroup to my desktop icon?

  How can I remove the homegroup icon that suddenly appeared on my desktop Windows 8

  I know and respect the fact that Sharief K is a Microsoft Support Engineer. but he doesn't know what he's talking about as a Microsoft Support engineer or he didn't understand the question.

  However, here's how to solve the problem in the right way...

  Question about this community newsletter is:

  (Windows 8) How can I remove the 'host group icon"from the desktop?

  Answer:

  1 right-click somewhere on the desktop that is free of icon/s with the left button of the mouse.
  Select "Customize" in the context menu, which will take you to the selection of window customize.

  2. Select "Change desktop icons" in the area of the hand at the top left of this window.  A "Change desktop icons" dialog (context menu) is displayed.

  3. Note the box on the left of the 'network' is checked.  Uncheck the box and then left click of the mouse will apply.

  4. at this point, the 'host group icon"will be removed from the desktop.  Now again check the box to the left of the 'Network' and then the mouse left click apply.

  And your all set.  That is of course until what you restart your computer, in which case this problem will happen again.  Gives one does not want to restart its system ever if you have Windows 8.

  On a more personal note, I am A +, Network +, MCP and a Bachelor's degree in electronic engineering technology and experienced Microsoft since 1992 when I always still served in the U.S. Army.  Sorry, but I am appalled and disgusted with the OS of Windows 8 not to mention Microsoft Office.

• Remove the VMs of SRM

  Hello

  I'm new to SRM and we have received a request from server that is taken out of service and you may have to remove SRM. Can someone let me know how to remove virtual machines to SRM step by step. What is the process to remove the virtual machines of the SRM. ? We need to remove the protection group VMs? or anything else, we need to do. Any help will be appreciated.

  Thank you

  vmk2014

  

  

  Hello

  Connect to your vcenter

  Back to home

  Under Solutions and applications choose Site Recovery

  Then click Protection groups

  Locate the protection group

  Under the gaze of tab in virtual machine to the virtual machine

  Then right click on the VM and 'delete Protection '.

  Once these steps are a Storage vMotion to reinstall the virtual machine on a data store that is not in the MRS.

  Kind regards

  Garish22

• Remove a person from the home group

  We had a friend staying with us. His laptop computer had Windows 7 and my husband too.  My office was an XP.  Computer for office has been replaced and now I have W7. I see this friend appeared in the homegroup.  A friend is no longer here, and I'm trying to put the computer of my husband and me in the homegroup, but can't.  How can I delete or remove a friend from home group?

  Hello

  1. How do you try to remove the person from the homegroup?

  2. what happens when you try to configure a homegroup?

  3. what version of Windows 7 you are using?

  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow these methods.

  Method 1: first of all, remove the homegroup, follow this link. Homegroup: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Method 2: You can run the troubleshooter in homegroup of the link and check.

  HomeGroup troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 3: Temporarily disable antivirus software and then try to configure the homegroup.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  In addition, see the article for more information:

  Homegroup from start to finish
  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

  Why can't I create a homegroup?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

• remove data from the channel

  I have several channels I want to remove a set number of data points since the start of the round, basically some data that are saved during an initialization phase, which I don't want not included in the data.  Is there an easy way to do this?

  Hello Jordan,.

  There is a command that allows you to clear the values of several channels called DataBlDel

  Command: DataBlDel

  
  

  Removes a data block in the channels.

  Call DataBlDel (ChnNoStr, ChnRow, ValNo, [ValDelOnly])

  
  

  Input parameters

  
  
  
  
  
  

  ChnNoStr

  Specifies one or more channels.

• Cannot able to remove a member from the Group:

  Hello

  I've had a named group compensation with currently 3 members say X, Y, Z. I'm removing 2 of them by the user to find x, then goes to his groups, selected one of its Compensation group, then

  by clicking on the button Delete.

  I see an error message to say: E-mail alias contains an invalid address.

  All of our users are synchronized with LDAP.

  Help, please. I searched all forums on this error. But I found nothing.

  Please see the screenshot below:

  

  Thank you

  Krishna
  

  I found the answer.

  It's the slightest mistake on because I'm trying to edit a group that was created in LDAP. The networking team removed the members of the group & now it works fine.

  ---

  Krishna

• Remove the ' system VLAN "Nexus 1000V port-profile

  We have a Dell M1000e blade chassis with a number of Server Blade M605 ESXi 5.0 using the Nexus 1000V for networking.  We use 10 G Ethernet fabric B and C, for a total of 4 10 cards per server.  We do not use the NIC 1 G on A fabric.  We currently use a NIC of B and C fabrics for the traffic of the virtual machine and the other card NETWORK in each fabric for traffic management/vMotion/iSCSI VM.  We currently use iSCSI EqualLogic PS6010 arrays and have two configuration of port-groups with iSCSI connections (a physical NIC vmnic3 and a vmnic5 of NIC physical).

  We have added a unified EMC VNX 5300 table at our facility and we have configured three VLANs extra on our network - two for iSCSI and other for NFS configuration.  We've added added vEthernet port-profiles for the VLAN of new three, but when we added the new vmk # ports on some of the ESXi servers, they couldn't ping anything.   We got a deal of TAC with Cisco and it was determined that only a single port group with iSCSI connections can be bound to a physical uplink both.

  We decided that we would temporarily add the VLAN again to the list of VLANS allowed on the ports of trunk of physical switch currently only used for the traffic of the VM. We need to delete the new VLAN port ethernet-profile current but facing a problem.

  The Nexus 1000V current profile port that must be changed is:

  The DenverMgmtSanUplinks type ethernet port profile

  VMware-port group

  switchport mode trunk

  switchport trunk allowed vlan 2308-2306, 2311-2315

  passive auto channel-group mode

  no downtime

  System vlan 2308-2306, 2311-2315

  MGMT RISING SAN description

  enabled state

  We must remove the list ' system vlan "vlan 2313-2315 in order to remove them from the list" trunk switchport allowed vlan.

  However, when we try to do, we get an error about the port-profile is currently in use:

  vsm21a # conf t

  Enter configuration commands, one per line.  End with CNTL/Z.

  vsm21a (config) #-port ethernet type DenverMgmtSanUplinks profile

  vsm21a(config-port-Prof) # system vlan 2308-2306, 2311-2312

  ERROR: Cannot delete system VLAN, port-profile in use by Po2 interface

  We have 6 ESXi servers connected to this Nexus 1000V.  Originally they were MEC 3-8 but apparently when we made an update of the firmware, they had re - VEM 9-14 and the old 6 VEM and associates of the Channel ports, are orphans.

  By example, if we look at the port-channel 2 more in detail, we see orphans 3 VEM-related sound and it has no ports associated with it:

  Sho vsm21a(config-port-Prof) # run int port-channel 2

  ! Command: show running-config interface port-canal2

  ! Time: Thu Apr 26 18:59:06 2013

  version 4.2 (1) SV2 (1.1)

  interface port-canal2

  inherit port-profile DenverMgmtSanUplinks

  MEC 3

  vsm21a(config-port-Prof) # sho int port-channel 2

  port-canal2 is stopped (no operational member)

  Material: Port Channel, address: 0000.0000.0000 (bia 0000.0000.0000)

  MTU 1500 bytes, BW 100000 Kbit, DLY 10 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA

  Port mode is trunk

  Auto-duplex, 10 Gb/s

  Lighthouse is off

  Input stream control is turned off, output flow control is disabled

  Switchport monitor is off

  Members in this channel: Eth3/4, Eth3/6

  Final cleaning of "show interface" counters never

  102 interface resets

  We can probably remove the port-channel 2, but assumed that the error message on the port-profile in use is cascading on the other channel ports.  We can delete the other port-channel 4,6,8,10 orphans and 12 as they are associated with the orphan VEM, but we expect wil then also get errors on the channels of port 13,15,17,19,21 and 23 who are associated with the MEC assets.

  We are looking to see if there is an easy way to fix this on the MSM, or if we need to break one of the rising physical on each server, connect to a vSS or vDS and migrate all off us so the Nexus 1000V vmkernel ports can clean number VLAN.

  You will not be able to remove the VLAN from the system until nothing by using this port-profile. We are very protective of any vlan that is designated on the system command line vlan.

  You must clean the canals of old port and the old MEC. You can safely do 'no port-channel int' and "no vem" on devices which are no longer used.

  What you can do is to create a new port to link rising profile with the settings you want. Then invert the interfaces in the new port-profile. It is generally easier to create a new one then to attempt to clean and the old port-profile with control panel vlan.

  I would like to make the following steps.

  Create a new port-profile with the settings you want to

  Put the host in if possible maintenance mode

  Pick a network of former N1Kv eth port-profile card

  Add the network adapter in the new N1Kv eth port-profile

  Pull on the second NIC on the old port-profile of eth

  Add the second network card in the new port-profile

  You will get some duplicated packages, error messages, but it should work.

  The other option is to remove the N1Kv host and add it by using the new profile port eth.

  Another option is to leave it. Unless it's really bother you no VMs will be able to use these ports-profile unless you create a port veth profile on this VLAN.

  Louis

• BGP announcement: How do I remove the attributes "next hop" and "metrics" inherited from OSPF?

  Hello

  I use a router THAT WAN Cisco ASR1001 connected via BGP AS65075 with our ISP.

  This router is connected through OSPF with our Cisco 7206VXR/NPE-G2 firewall.

  Topology:

  ISP <- bgp="" -="">RT 1001 <- ospf="" -="">FW 7206 <->LAN

  On the WAN router, static routes are set to null0 to always announce our class C networks.

  Route IP 192.168.10.0 255.255.255.0 Null0 250

  ...

  Network guidelines are placed in our BGP configuration:

  router bgp 65075

  The log-neighbor BGP-changes

  neighbor EBGP-PEER-IPv4-peer group

  EBGP-PEER-IPv4 neighbor fall-over bfd

  neighbour 192.168.88.138 distance - as 65200

  192.168.88.138 a neighbor EBGP peers PEERS-IPv4

  192.168.88.138 ISP IPv4 neighbor description

  next password 192.168.88.138 7 unknown

  !

  ipv4 address family

  ...

  network 192.168.10.0

  ...

  a neighbor EBGP-PEER-IPv4 soft-reconfiguration inbound

  EBGP-PEER-IPv4 neighbor distribute-list prefix-v4 on

  an EBGP-PEER-IPv4 neighbor prefix-maximum 100

  neighbor EBGP-PEER-IPv4-1 filter list out

  neighbor 192.168.88.138 activate

  neighbor 192.168.88.138 filter-list 2

  output-address-family

  A part of these networs are also learned through OSPF. If these routes are present in the routing table:

  RT-01 #sh ro ip 192.168.10.0

  Routing for 192.168.10.0/24 entry

  Known via "ospf 1", distance 110, metric 20, type extern 2, metric 1 forward

  Published by bgp 65075

  Last update to 192.168.0.79 on Port - channel1.28, 7w0d there is

  Routing descriptor blocks:

  * 192.168.0.79, from 192.168.0.71, 7w0d there is, through Port - channel1.28

  See metric: 20, number of share of traffic is 1

  Because these roads are active in the rounting table. Announcing BGP based on his and attributes "next hop" and "metric" are inherited from OSPF:

  RT-01 #sh ip bgp neighbors 192.168.88.138 announced-routes

  ...

  Network Next Hop path metrics LocPrf weight

  ...

  * > 192.168.10.0 192.168.0.79 20 32768 I

  ...

  Is it possible to remove the legacy of OSPF into BGP attributes?

  How to set the "next hop" to the value 0.0.0.0 and "metric" to 0?

  Thank you

  Best regards

  Jérôme

  Hello Berthier,

  NEXT_HOP is a hill & attribute mandatory path including the eBGP value is the IP address of the BGP peer (specified in the neighbor's remote control) where the router learns the prefix. Thus, your peers (eBGP) will still see the IP 192.168.88.138 in your BGP Next Hop as updates. I agree you the output of the command ' sh ip bgp neighbors 192.168.88.138 roads announced "can be confusing, but not worried about it.

  Metric 20 is cause of path must be acquired by OSPF. Copy in default atributte MED BGP metric. So I see that you have only a peer is very important change this value because MED is not transitive, if this value is not propagated by other ACE access your provider. Anyway, if you want to change, you must:

  1. create a list of prefixes with one or more prefixes that you want to "reset" the MED value:

  list of prefixes prefix-to-reset-MED seq 5 permit 192.168.10.0/24

  list of prefixes prefix-to-reset-MED seq 10 permit X.X.X

  2. create a roadmap

  allowed to reset - MED card route 5

  match of prefix-to-reset-MED IP prefix-list

  the metric value 0

  road map provided to zero-MED allowed 10

  !

  The last road map is necessary to ensure that the rest of the prefixes are sent.

  3. apply the road map

  a neighbor EBGP-PEER-IPv4-roadmap given to zero-MED on

  Concerning

• Change the VM group vCenter watch NIC port is connected to the old and the new portgroup

  OK, I have built/upgraded to vSphere 5.

  Everything is fine, and now we migrate the virtual machine to the new VDS switches.

  I'm migrating each VM frm the old VSS to their port group concerned on the VDS.

  EVERYTHING is going very well unless I have a few VM, is that when I change VSS port 'The Virtual Machine Network' group the new service VDS 'Network of the Virtual Machine' vCenter shows the VM as being connected to vSwitches/Exchange.

  If you look at the network/host the virtual computer configuration is shown as attached to the VSS and VDS.

  If you use the CLI PowerShell the VM shows that connected to only the VDS, great she is successful, but how can I remove the old switch if he thinks that it is connected to a virtual computer?

  The VM keep in network connectivity.

  I also tried to change the portgroup interface CLI PS and it returns the same result in vSphere.

  Any thoughts?

  Was it virtual machines running snapshot in assets when they have been migrated from VSS for VDS?

  If so, both can be listed in the properties of the VM... In case you need to return the nod on those virtual machines, they will be then be reconnected to the old vs...

  / Rubeck