Remove the recovery data or not?

Similar Questions

• Remove the recovery Partition

  Hi, this is my first post, I write because I have experienced a problem with a HP ultra-livre.

  I just bought a HP Folio 13. I burned the DVD with data recovery (using the "Create recovery media" button in the HP Recovery Manager) and I would like to delete the recovery of data stored in the secondary partition (as they occupy almost all of it) by the button "Delete the recovery Partition" in also HP Recovery Manager. What worries me is if I remove the recovery of data stored in the partition of my computer, (whenever I need them) can I restore from the DVD I burned? can you assure me that it will work, or there might be no problem doing this?  If not, what is the sense to display a button named "Delete the recovery Partition"?

  Looking forward to your kind response,

  Thank you very much

  Hello:

  In theory, the recovery discs that you do should work.

  In reality, this is not always the case.

  Please read these tales of woe on the link below (there are 324 pages of discussions) and decide for yourself what you want to do, because nobody would be able to make no assurance that your recovery disks will work.

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?q=recovery+disks+Don%27T+work

• When I turn on the computer of mymy and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  Original title: IO error

  OK so I turn on my computer and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  I run an xp windows 2003-04. My computer does not start completely and if I click on debug or put end to the program there just restarts the computer. How can I solve this problem? and is it possible that I can update my software?

  You say that you can not even start in Safe Mode, so method 1 will not help you, method 2 will not help you and 3 method will not help you.

  I start in the XP Recovery Console and first run a chkdsk/r on the afflicted system, but since we don't know anything about your system, we will need more information.

  It is a shame that in the forums MS Answers, the first response to a new question is (or should be) a request for more information...  You are 5 days in your problem, and so for him it seems that you are not getting anywhere.  If the thread goes inactive for more than a few days, the response of the Microsoft Support Engineer will become the 'response' automatically because it has links to the KB articles.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• I followed the instructions for "Go Thunderbird data to a new computer," but the calendar data has not been transferred and the calendar program does not work.

  I manually moved my profile of Thunderbird in Ubuntu 12.04 LTS to 8.1 Windows. I followed the instructions and everything settled as expected except the calendar. Not only the calendar data has not been transferred, the calendar itself does not, for example no dates & everyday of the week, etc., all the menus associated with the calendar are "grey," etc. I'd appreciate any help. TIA KellyJMorris

  Calendar (aka Lightning) contains binary components, which are dependent on OS. Thus, you should not remove the add-on lightning in your add-ons Manager and install the Windows version of lightning.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/

• How to remove the synchronization data?

  FF 29
  The answer in my opinion is to go to 'manage '.

  I sign in with my sync email and password.
  

  The choices are:

     Sign out
     Change password
     Delete account
  

  I don't want to delete the account. I just want to remove the synchronization data, so I can start over?
  How do I do that?

  Hi silat.

  Mind if I answer? For most everyone here answering the questions is a volunteer support and we do not work for Mozilla. We are just regular Firefox users like you who contribute to our time to help the Firefox community.

  As for your sync account, the only way I know how is to remove your sync data completely is to delete your account then sign in using the same e-mail address. I tried it on a new profile of every night and it passes through very well.
  Simply go to https://accounts.firefox.com/settings and select 'delete account '. Then just sign up again.
  A few other contributors may have another way to achieve (they could respond if they do), but that's the way I know how.

• XP pro sp3 run asr, but didn't start; files for the recovery diskette could not be created

  I had previously asr has been successfully run on the same configuration but have decided to update the recovery data. I tried to restart the asr by clicking Start, all programs, accessories, system, backup tools. The Backup Wizard appears and I clicked on Advanced Mode. Then followed the backup utility page, I clicked on the ASR Wizard. The next page has been the preparation of Recovery Wizard, I clicked next and was presented with the option of backup destination and, after finishing the backup destination, I clicked Next. My page was last option; End of the ASR Wizard, I clicked Finish. Backup went into his usual preamble but almost instantly a warning box came up with the message "files for the recovery diskette can not be created." I am running xp pro sp3 as I had been for the creation of the previously successful GDR.

  I also tried using the Backup Wizard and I clicked on backup all information on this computer (this option automatically provides ASR) and followed the instructions of the wizard through to the end and the failure has been the same.

  I found a solution to my problem of ASR. If I was not able to create an asr backup, I was still able to run Ntbackup. I've saved my OS drive then ran repair with the XP Professional installation cd. Backup ASR works now.

  OK, I had to reinstall all them that updates the Knowledge Base Microsoft and also all the Service Packs. One or two of the plug-and-play applications were a bit annoying, but be as I have all the installation cd, other than being tedious, have all been re-installed and the system is now as good as new.

• How to remove the recovery disc files D?

  Original title: drive D

  How to remove the recovery disc files D?

  Hello
  
  It is not recommended to delete the files in the recovery partition.  Recovery partition contains the Windows information to retrieve the computer crashing. I would ask you to contact the manufacturer of the computer on it.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Manager Windows 8.1 and the HP recovery disk manager cannot remove the recovery partition

  I have the following computer: HP ENVY h8 desktop PC - 1437c.  I used the HP Recovery application to do a recovery on a flash drive disk. When you have finished this operation it was not an option to remove the recovery partition (drive D on my computer. I tried to reopen the HP Recovery Manager and try to remove it like that, but to remove it is greyed out. I also tried to delete it using the 8.1 windows Disk Manager, but there is no way to do there either. If I right click on the recovery Partition, I get only an option 'help '. How can I get rid of this partition and recover lost space using it now on my hard drive. Windows and HP did not want to provide more records with their computers, but they do not have a problem of screwing of MY hard drive that I bought and paid for. I should start to charge rent for the space.

  I just used the software and created another partition as drive D using all unallocated space. I can delete probably once again, or maybe I'll just use it as a storage device for my files instead of recovering files sofetware... Thanks for the help

• I how to remove the recovery partition and make the entire hard drive, a recovery partition?

  I have two hard drives and the two have a recovery partition. Disk 0 is disk 1 80 GB and 500 GB. I want to remove the recovery on both partition and drive 1 recovery partition. Disc 1 is much older, but I would have preferred free space on disk 0.

  I have two hard drives and the two have a recovery partition. Disk 0 is disk 1 80 GB and 500 GB. I want to remove the recovery on both partition and drive 1 recovery partition. Disc 1 is much older, but I would have preferred free space on disk 0.

  The "recovery Partition" in question is not a thing of Microsoft.  Ask that ever created it (the manufacturer of your computer) which will probably help you not because it's beyond their desire to do so.

  I suggest you create / have external media and numbers of series/product key in another place course of the computer itself.

• How do I remove the launch date for the safe in FF portable ESR 31

  How do I remove the launch date for the safe in FF portable ESR 31. Is it possible that - by pressing the SHIFT key when you launch firefox shows the option of safe mode - off and close the browser.

  See also:

  • http://Mike.kaply.com/2013/01/11/disabling-safe-mode-in-Firefox-17/

• I restricted to a drive to access by others.now I want to remove the restriction.i am not able to do.

  I restricted to a drive to access by others.now I want to remove the restriction.i am not able to do.

  Hi nagendrasharmanarayanam,

  1. what operating system do you use?
  2. What is the exact error message you get when you try to access the drive?
  3. How is - that prevent you the user from accessing the drive?
  4. what kind of Player do you use internal or external?
  5. When you say than any other user, do you mean an another user account on your computer?

  I suggest you try the steps from the following link and see if that helps.

  What to know before applying permissions to a file or folder
  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

• "I get,' files for the recovery diskette can not be created ' and I can't save my PC

  When I try to back up my PC, I get "files for the recovery diskette could not be created" how to fix this?

  Hello

  This problem can occur because ASR is not supported in Windows XP Home Edition. However, users of Windows XP Home Edition can access the Recovery Wizard if they install the Ntbackup program in the Windows XP Home Edition CD-ROM Valueadd folder.

  See the steps listed in the article below and check
  An Error Message appears when you try to use the Automated System Recovery Wizard
  http://support.Microsoft.com/kb/302700

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP S3120N. I replaced the motherboard and the power, now the recovery disks do not work.

  I'm not so happy owner of a HP Pavilion S3120N. I am running windows vista home edition. The motherboard went out so I replaced it with a Zotac GeForce 8200 - ITX Wifi series. Now the computer says it is noa a hp solution valid, and the recovery disks do not work. is there a way to fix this without buying a new operating system?

  Yes, return the Zotac motherboard and get an OEM HP/Compaq M2NC51-AR / HematiteXL-GL8E motherboard. I know that's not the answer you want to hear, but the recovery discs are locked to a specific set of HP/Compaq machines with specific HP OEM motherboards. Apart from this, you will need to buy a new OS.

  Frank

• When I complete and sign a form and then print it out, the form data does not print.

  When I complete and sign a form and then print it out, the form data does not print. The form fields are empty with the exception of any signature.

  Thank you. Depending on your answer, I have compiled a procedure:

  Fill & sign a form in Adobe CD and print the form fields:

  (1) open the document.

  (2) click on tools - prepare the form. All fields are displayed in a vertical list in the bottom right of the screen.

  3) click on the first field in the list, scroll to the bottom of the list and shift-click to select all.

  4) click on the first field in the document, make a right click, select Properties.

  (5) on the general tab, uncheck the box locked in the lower left corner. Under field properties common form, select Visible and uncheck the read-only box, close.

  (6) print out and save the file.

  Note: even if you select all the fields in the document in step 3, this procedure may work for the fields on page 1. In this case, repeat steps 3 through 5 for each subsequent page.

• How to restrict the scope of the EU change when the input data are not available?

  Hi Experts,
  
  I have a user enter-able (EU) field in the Section. When the tag input XML contains data for this field, then the value must print in this area and it is not editable.
  If the input data are not available only that one time that the field of the EU must be editable.
  
  Any thoughts?
  
  I tried like below,
  
  Domain name creation: UE_CompName
  Length: 15
  Type: alphanumeric
  Rule: XDD
  Source name:! Transaction/Compname
  under PreEdit,.
  module: DALW32
  Procedure: procedure of desired
  Information: CALL ("UE_CHECK")
  
  like that, I've updated in the field properties.
  
  Content of UE_CHECK DAL below,
  
  CurrFieldName = Fieldname()
  CurrFieldData = @("CurrFieldName")
  
  IF CurrFieldData! = « »
  SetProtect ("CurrFieldName")
  END
  But it does not work... Pls help me to do this...

  I assume that the 'mapping' occurs during a batch operation (Gendata) through any rule the XDD defined for this field. In the batch, pre and Post Edit calculations do not. This feature is related to the WIP/entry. What you can do is to add a level section - PostImageDAL rule to call your script and protect your land once it was located batch of your operation.

  In FAP that contains that field, add the PostImageDAL rule in the property of the rules in the Section box. In the data box, do call your script.
  Your script is a bit wrong, it seems you were trying to get the 'current' domain name and then check the value of fields. Drop the part and simply name your field in the string in quotation marks in the @ () function and the SetProtect.