Remove the reference to index mark

Similar Questions

• on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to run the audit files system analyses on the computer. You can check the link for the procedure: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  Adding to it, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• REMOVE THE REFERENCE TO SLPMONX. EXE IN REGISTRY__

  HAVE BEEN DELETED AND SLPMONX. EXE AS A CHARGE BY SEIKO. SE ERROR MESSAGE AT START UP TO DELETE REFERENCE TO THIS FILE WE REGISTER

  Use free Windows Sysinternals Autoruns tool to find and remove the reference.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Could not load or run 'pythizer.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  I get this error "could not load or run 'pythizer.exe' specified in the registry." Make sure that the file exists on your computer or remove the reference to it in the registry. Whenever I turn on my computer. I found and deleted the file, but this error keeps coming back. HELP ME PLEASE!

  The Startup tab looks like the registry.
   
  Try this utility that searches in less common places
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx?ppud=4
   
  Maybe another program trying to start pythizer.exe that is not a
  message we get from booted windows of programs.
  --
  ..
  --
  "Jonny G" wrote in message news: 2a8f4e05-44-cf-480C-8056-7e895939c845...
  > No go I'm afraid. Doesn't seem to be in the start menu. Is there a way
  > watch the "registry"?
   
   

• When starting, I wonder to choose between XP or Vista? I have XP NOT Vista! How can I remove the reference from Vista?

  My system has been initially implemented as a Dual Boot XP / Vista. Vista has been deleted and I would like to delete the reference from Vista in the trunk. In the case where someone boots into existence no reference of Vista, the systems does not crash but goes in a loop in question, try to Boot. By answering the questions, the system takes you to the initial question, with "an earlier version of Windows or Vista? How can I eliminate this? It is not a problem, once you know you have to select "older version", but if you do not, the timer runs out and trying to boot Vista. Many people use this system and good day, they get caught up in this cycle.

  Best regards

  Mike Lynch

  Best regards

  Mike Lynch

  Your master boot record think you still have Vista.

  You can fix this since the XP Recovery Console.

  You can start RC since a genuine XP bootable installation CD or make you a CD bootable XP Recovery Console using these instructions:

  http://www.bleepingcomputer.com/forums/topic276527.html

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  Enter the following command and answer Yes to the warning:

  FIXMBR

  Enter the following command and answered in the affirmative:

  Fixboot

  Remove the Console CD recovery and type 'Quit' to restart your system.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony.

• Remove the reference to the earlier Version of Windows

  I already deleted the old file of windows and want the program to automatically, select Windows 7 and continue the statup rather than compels me to do the selection.  Everything works ok but it would speed up the boot process if the reference to the earlier version of windows has been omitted.

  You can go to control panel, system, advanced system (in the left pane), startup and recovery. You can select the default OS and uncheck time to display list of operating systems. Which will automatically default start without any delay.
  
  --

  Dustin Harper
  E-mail address is removed from the privacy *.
  http://www.mstechpages.com  Microsoft News, support, FAQ, and much more!

  "kansas34" wrote in message News: 6099b2f6-4f89-4801-9111-56a90cd43c75...

  I already deleted the old file of windows and want the program to automatically, select Windows 7 and continue the statup rather than compels me to do the selection.  Everything works ok but it would speed up the boot process if the reference to the earlier version of windows has been omitted.

  Dustin Harper * address email is removed from the privacy * http://www.mstechpages.com---aide Windows and Support Page

• How to remove the ripple and keep marker locations

  I have 30-minute video without about 15 marked the areas that I intend to export.  I find that when I remove the ripple or insert my markers on the road do take place there on the timeline. any means to deal with this? (or is there a better way to keep track of points scored for export)

  Do not know if this will help, but it's technical support information, I received from the home. It helped me:

  Go to the marker menu, at the bottom, rocking on 'ripple sequence markers. Now when you insert a clip, the sequence markers are wrinkled forward to stay in harmony with the music, they have been associated. Similarly, when you ripple delete a gap, they ripple back to stay in harmony.

• Hello, reference is made to the software that I uninstalled in the options/applications list and I want to remove it. This file I remove and or modify in order to remove the reference? Using Firefox 10.0.2 - vista windows thanks

  Basically just a list of software that has been uninstalled, but left behind a reference to its own type of file under options/applications.

  I also noticed that the ability to save tabs on exit seems to be missing from this version, or am I wrong and there is an option to restore this function. Thanks in advance,

  < /a >

  You would have to edit or delete the mimeTypes.rdf file in the Firefox profile folder.

  • http://KB.mozillazine.org/mimetypes.RDF
  • http://KB.mozillazine.org/File_types_and_download_actions#Resetting_download_actions

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

• How can I remove the reference backup file stored on my C: drive.

  I want a completely new backup but he insists on referring to the internal list of backup files and they no longer exist.

  Hello

  You can try the following article suggestion

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Go to the section How to delete a backup I created using the wizard backs up files?

  Also for reference:

  http://TechNet.Microsoft.com/en-us/Magazine/2007.09.backup.aspx

• Reference specifications index page

  I am trying to create an index of the object using the Index marker type (using unstructure FM 12). The output should look like this (the image below was created using the type of marker 'Topic'; I need to use "Index" because it is what generates in the ePub output):

  
  

  

  However, when I generate using the marker Index type, I lose the blue text and the chapter number before the page number. From what I can tell, FM is somehow inserting < $pagenum > in the reference specification index page, although I've specified in there it should be < hyperlink > < $chapnum > - < $pagenum > < Defalut Para fonts >.

  Any ideas how I can get it to stop inserting the < $pagenum > in the reference page?

  Check the names of paratag (i.e. compare what FM created with you). FM will only add new entries if it does not find those corresponding to the levels used for Index markers. The paratags should all end up in "IX" when you use the marker "Index".

• What defines the reference name in a type library

  I've created a DLL in CVI 9.1 for use with VB6.  I used a function (.fp) workgroup file to define the functions exported from the DLL.

  We add the DLL as a reference to the VB6 project, which allows functions defined in the .fp to be used directly from VB6 without using info prototype of any kind.

  One problem with this regime removes a reference from Visual Basic 6 development environment - there is no obvious way to do it - there is no possibility to "remove the reference.  We invariably liquidation brute force tearing all this reference to the DLL in the registry and remove the DLL itself the facility so that VB6 keep find it and insisting on using it.

  One aspect is the name of the reference.  What estblishes the name of the reference to the VB6 development environment?  What is the name of the DLL?  It is the name of the .fp file?

  I could run an experience I guess, but maybe someone knows and can tell me.

  Thank you.

  Menchar

  Menchar-

  It turns out that the name of the file function group (.fp) establishes the name of the reference when the DLL is added to the Visual Basic 6 development environment.

  The developer can see the associated DLL name, but the reference itself is the name of the group file function that may or may not be the same name as the DLL, the project, space to work or anything else.

  Thanks for the help, Menchar, you're always on the ball.

  Menchar

• Delete the reference to the backup folder

  I created a 'A' backup volume on an external hard drive using Microsoft backup/restore utility.  I then "deleted" this backup volume "A" using Windows Explorer.  When I use "Backup/Restore" to restore files from other backups, backup volume 'A' is always displayed as a location valid for restoring files.  If I choose the volume 'A', I am allowed to choose a folder or a file and when I run the "restore" command, an error message appears indicating the folder or file is not on the drive (which is as it should be).  My question is "How do I remove the reference to A backup volume, so it does not appear to be a valid backup volume?

  Hi Bill,

  Thanks for posting your query in Microsoft Community.

  If you do not have appropriate (or permission) rights for a file or folder, you can not remove it. If not create you the file, you may not be able to delete it, even if it is stored in the Public folder. If this is the case, you must ask the owner of the file to delete. To learn more about permissions, see permissions are?

  In addition, you cannot remove a file (or the folder that contains it) if the file is currently open in a program. Make sure that the file is not open in any program, and then try again to delete the file or folder.

  Close all open programs, and then try to delete the folder. If this does not work, restart your computer and try again to delete the folder. Most likely, the file has not been deleted because another program was using a file that was in the file.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How to remove the unwanted contained in peoplesoft?

  Hi guys,.

  I want to remove the reference of the content and also any related association as portal register menu item completely.

  How to register a component online?

  Thanks and greetings

  Yes. It's the delete what I am referring. If you delete the ARB or a record, he would remove it from the database.

• How to permanently remove the folio shared the end-user?

  Hi all

  I had several folios shared with me via an adobe ID, I don't have access to.  I would like to delete these folios shared viewer content adobe on my ipad at all times, including references to the version of cloud.  I've already removed local data, I just need to remove the reference to the copy of cloud.

  Any help is appreciated.

  See you soon

  Peter

  Sign up on http://digitalpublishing.acrobat.com/ with your Adobe ID, go to producer Folio and delete them from there. It's a little weird because it feels as you remove the entire folio, but you delete just your shared copy, not the original who created the other person.

  Neil

• Problem with remove the child to

  I have an empty clip that contains text and media for executives in a lesson called content_mc
  
  I load dynamically in a text box and then other things such as graphics, videos and other swf files...
  
  before you begin to insert swf files, it worked very well, but it was just the text on the screen, now that I have other media, it removes "randomly" children and I can't understand why it's what I use:
  
  for (var c:uint = 0; c < content_mc.numChildren; c ++) {}
  trace (c + ":" + content_mc.getChildAt (c) .name);
  content_mc.removeChildAt (c);
  }
  
  Anyone know what is happening?

  Figured it out!

  OK, for those of you who want the answer to this, but don't want to pay for it...

  I realized that when you use the removeChildAt() she removes the child of the index number... so the way I did it was like this:

  for (var c:uint = 0; c
  trace ("-" + content_mc.getChildAt (c) .name + "(" + c + "')");
  content_mc.removeChildAt (c);

  doing this, he was first to remove the child at index 0. and what made flash NOW are "slides" down an index... so the element that was at index 1 is now 0, the element at index 2 is now 1, etc... so when I arrived at the last, it would not remove it because it was no longer there...

  but change to it (instead of using the variable c, you have just put 0 in the index box):
  for (var c:uint = 0; c
  trace ("-" + content_mc.getChildAt (0) .name + "(" + c + "')");
  content_mc.removeChildAt (0);

  solved the problem :)