Loss of data after you turn off Wifi

Similar Questions

• I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  If you want to reformat the hard disk, in erasing all data on the computer, there is no need to uninstall.  Deactivation is sufficient.

• Cannot get on my computer after you turn off FileVault

  I can't get on my computer after you turn off FileVault. After reboot, he asked my name and my password. It didn't work and now I'm stuck at the connection. What should I do? The computer is new and I had nothing recorded on it.

  Reboot into recovery (command-R) Mode. Then use disk utility to ERASE the drive. Select the top reader of the page entry and select Delete. This will erase, reformat, and create a single partition. Close disk utility, then select reinstall OS X OS X Utilities menu.

• BlackBerry Smartphones can not remove grayed files after you turn off the WiFi sync

  I got sync music WiFi on, but after I left the proximity of my WiFi, there more grayed out 1,000 entered the path of my browsing in the 100 or if the files that are available locally on the device.

  Then I turned off sync music Manager Office, but even after many cycles of connection/disconnection between BB & USB WiFi, all these files in gray are always in the way on the music of the BB icon tag navigation interface.

  How can I uninstall this feature? Otherwise, how could I make my icon music works as he did, not broken by WiFi-sync as it is now?

  Please notify.

  If you want to uninstall WiFi Sync, please go to the Options icon > device > application > search for WiFi Sync and delete

• Data on passports blackBerry won't turn on again after having turned off Wifi

  Hello

  When I turn off my Wifi, my passport is not connect to the data.  I need to turn off the mobile network and restart to get the data again. It happens 100% of the time.

  Reflections on the patches?

  See also:

  supportforums.BlackBerry.com/T5/BlackBerry-Passport/Calendar-Time-Zone-issue-Again/TD-p/3031616

  It's 2 problems with my passport.  My patience to the test.  Although to be honest, my Z10 in February 2013 was a disastrous wreck of a phone - I can't believe delt with that nonesense for almost 2 years.  The Passport is a bargain compared to this, but still these 2 questions upset me a lot.

  Your help would be great.

  David

  That's what I want to do, live with it, maybe try an OS reinstall on a rainy weekend just to know if it is or not.

• The user account cannot access the internet once parental used contract, even after you turn off the parental control

  I created a user account for my child. I am able to access the internet through firefox. Then I set the parental controls and can NOT access the internet more. I turn off parental controls for this user account. I still can't access the internet from this account.

  Parental control is a part of the operating system Windows and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/

• Access after you turn off the router/nat [WCG200 v1]

  I use the WC200v1 for a while and it was a lot of work.  I disabled the router/Nat and comes to be used as a modem only.  After you disable the routing/Nat, you are given an IP address, which still allows access to the device.  I don't remember what is this IP address.

  I have another device offering routing/WAP capability.  The WCG200 acts ONLY as a modem.

  Someone knows what IP to use to still access the device or should I just connect my PC directly after performing a factory reset.

  Thank you!

  -t0ken

  Use http://192.168.100.1/ router and Nat have been disabled.

• game does not load after you turn off the flash of pepper

  I play a wgt golf game, the game said if I were haveng problems turn off the flash of pepper and I did it and now the game does not load happens to 77% it stops there. Ive been trying to find how to activate the pepper flash then maybe I can play the game but no luck. I can play the game on my other computer without any problem, please help

  Flash Player Help. Installation problems | Mac OS

  Flash Player Help. Installation problems | Windows

  Mylenium

• Annoying noise, even after you turn off the sound pop up

  I don't know how to get rid of this annoying noise on my computer. Initially as if it's the pop - up, but I turned it off n keep me this annoying noise... someone can tell me how to stop... Thank you

  Please read my last post:

  1. DESCRIBE the sound - beep, snoring, thud?

  2 is him coming from your speakers or your PC?

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Tecra A9: Windows does not start after you turn off multiprocessor in BIOS

  I use a Toshiba Tecra A9 with a Core 2 duo. I need to change the bios setting to run a special program, "multiprocessor: disable. Now, I've changed back to the bios setting "multiprocessor: activate ' and win xp stop start after login. With "multiprocessors: Disable" the computer starts normally. If I press F8 after starting the computer and select save mode, the computer starts.
  I don't have any idea what I can do to solve this problem.
  Any ideas?
  Thanks in advance.
  Ulli

  Maybe the ACPI-Multi CPU driver was not installed correctly or a MS patch is necessary.
  I read on some similar topic websites.
  It is very important that the XP SP2 has been installed and other patches.

  At this time the new Win XP SP3 is available. I think that this is a beta version, but I already installed it on my XP OS.

  So maybe you should enable the multiprocessor option in the BIOS then you need to install the XP again. Then install all available Ms patches, fixes and eventually the SP3 too.

  Then check again.

  One question; Are you using the newest BIOS?

• Problem with Internet connection - connect only after you turn off allowing then again.

  It is a recent problem that unfortunately I have very little information on. In other words, after months be happy and connection to the internet when you start the computer has decided he won't d more, instead he wants to deactivate and then activate the connection to the local network before it will connect.

  There is no error message and the convenience store could not find that something wrong then directed me here! I tried to diagnose too but didn't know what was wrong either. There are two computers connected through a router and the other is fine, ISP technical support assures me it's nothing to do with them either.

  It left me speechless. I tried the system restore, I crossed the two diagnoses available in internet options and I called ISP support. Although this isn't a direct threatening problem, it's one of those little niggles you want just leave.

  If anyone has any ideas on how to fix things, I'd be grateful.

  * Acer Revo running Win 7.

  Hi tmaxwell83,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. What is the type of internet connection you use?

  This would happen if the NIC driver is corrupt or needs to be updated.

  I suggest that you install the updated drivers for the network adapter on the computer by visiting the network card or the computer manufacturer Web site, the check if it works fine.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install a driver after you turn off the auto-update

  I disabled auto-update Windows Update drivers by following the instructions in the following article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/disable-auto-install-drivers/61d02eb2-C131-44BF-b743-d614f0189cf2?TM=1347039132644
  It was due to the update of Windows Installer drivers on top of my existing bluetooth drivers and prevent the unit to work. I had to reinstall Windows to solve this, UN-installing then the installation of the Dell printer drivers did not work.
  I just bought a Freecom 2 to drive that connects via eSATA. Unfortunately, the instructions say that I don't need to install drivers because Windows will do it automatically! Ugh.
  I am reluctant to turn to the auto-update as it will probably destroy bluetooth again. So the question is: How can I install Freecom drivers and the problem of bluetooth do not breed take the risk?
  Note: Looking at the dialog box "want you Windows to download the driver software? ' there is an option to" install the driver software from Windows Update if it does not appear on my computer.
  Well well... driver Dell bluetooth software is on my computer (the software to install, it is on my C: drive and it is also installed) so not preventing him to get the version of Windows Update? I am concerned about the confidence that, given that the driver has been installed also the last time he downloaded the MS driver (although the auto-update feature was turned on at that time here). I'm afraid to think that the Dell driver's oldest (who is) and so he gets crushed.
  Thanks in advance.

  "the fact that the manual says that he needs a driver to be"automatically installed by the operating system"suggests that... he needs Windows Update."

  (1) while I don't have an external HARD drive in a box I have a case of a slot for external e-SATA replaceable hot which is about the same as a commercial external HDD, but without the box.
  When I plug in a HARD drive into the slot in Windows automatically detects the drive.
  Windows should automatically install the drivers for basic/generic for most of the devices when it detects something new just to be attached/connected. Once Windows did, this 'device' must be posted from there on.
  This is not the same thing as let the Windows updates to install the drivers.

  So, when you plug in the external hard drive on e-SATA port, the first time Windows pops up a similar message to-"new device detected... the driver installation, you can check if the device is detected and drivers are installed by going to computer management > Device Manager to see if your external HARD drive is on the list of hard drives."
  If non - R / click on hard drives and click "search physical changes.
  There is also an option here to update the drivers.

  You are quite correct disable optional updates.
  It is not a recommended option, especially for the graphics drivers and chipset.
  Personally, if the mfg of the material provides drivers on their website always download and install the drivers manually.
  As a result of that it is prudent to updated Windows configuration only updates are available so you can choose which you want to install and choose to install it on your own time inform.
  This way you can close applications and browsers and better to avoid the possibility of corruption updated leaving the priority update. It is also
  more course with a clean install of Windows to start with sp1, and then do the other updates in small batches.

  2. when the HARD drive is connected and recognized in the Device Manager are moving
  for the computer management > disk management. This shows the good
  for HARD drive capacity?
  If the HARD drive has only a small partition and unallocated space that is perhaps why only a small capacity is shown elsewhere.  You can format the HARD drive and
  create a new Partition or Partitions here.

  "b if I uninstall/remove device, then as soon as I tried to install the driver from the manufacturer it seemed to install ok, but... still bluetooth didn't work." It simply detects all devices everything I tried. »

  Have you tried the fix .NET? .NET can be damaged and should be
  updated in all cases.
  It's been awhile, so I don't remember why (safety improvement?) but I uninstalled .NET and reinstalled with. NET4.
  DOWNLOAD: Microsoft .NET Framework 4 (Web Installer) - Microsoft Download Center - Download details

  .

• After you turn off the root of the directory utility user, I went back to the main screen and all other user accounts showed is no longer at the start, as they were before you enable the root user.  Help.  Please, I beg you.

  I have activated the user 'root '.  It was an attempt (for the sake of granddaughter age) to check its history since I am the administrator.  Realizing that this method was much more complicated than what I am capable of managing, I returned the utility program directory and disabled the user 'root '.  I thought that everything was ok, as I did not made anything while connected as user 'root '.  Instead, restart the computer, all users, including myself were no longer at the start.  The only point was a blank user name and password.  No picture.  No guest.  No user.  How to return those and I did something to cause this?

  Else you being logged in as root?

  Activation and deactivation, then root should not have caused that.

  Also, having allowed root is one of the ways you get a login screen showing only the name and the password.

  You should be able to type in your user name and password to connect.

  One time connected, check users & groups system prefs, Connection Options and make sure he's on the list of users. You will have to click on the padlock at the bottom to make changes.

• If you turn off your WiFi router is still sending wireless signals?

  I have the wrt54g router and if you set the 'disabled' wireless settings which means that WiFi is disabled, which stops the router actually send wireless signals?

  I guess my question is do the WiFi compatible routers send wireless signals even if you "turn off" the WiFi option on your router? Thank you.

  The WRT54G is an active wireless router. If you select off in the wireless tab then the router will not any signal wireless broadcast.

  

• WiFi falls frequently, must turn off wifi to the computer, then turn on

  Greetings,

  I have four Macs, all the different models and with different OS, with El Capitan and this happens on all. I have an Airport Extreme router, aged about 1 1/2 years. Throughout the day, wifi doesn't work. To get to resume, I have to go into menu wifi on the computer, turn off wifi, then turn it back on. This example gets going again.

  I tried using automatic channels as well as various specific channels on our Airport Extreme. I also have 5 GHz and 2.4 normally. I, of course, restarted a gazillion times (this has happened for about a year). I still have to find a solution.

  Suggestions?

  Thank you!

  Amy

  It is possible that you have a faulty AirPort base station, the other thing to ask is: do you live in a place with a lot of other Wi-Fis operating? As an apartment or condo complex... or a dorm student perhaps? Connectivity spotty Wi - Fi is usually associated with some sort of interference of a Wi-Fi connection. Other Wi-Fis in the close vicinity would be a major culprit.