Remove the top bar when you start Windows

Similar Questions

• How can I stop the quick loading when I start windows?

  I right click on the taskbar and unchecked it I also right click on the taskbar and has tried to stop some loading toolbars but whenever I restart my computer they reload. How can I stop their reloading? I appreciate any help I can get with this problem. Thanks in advance.

  Hello

  You can stop some programs from loading when the system starts by disabling startup items in the Configuration of the system. Follow the steps mentioned below to open the system configuration.

  a. Click Start and then click Run.

  b. click on the Startup tab and uncheck the program you want to load during startup.

  c. click on apply and then OK.

  d. it will disable the programs loading at startup.

  You can also right click and remove programs from the startup list which is present in all programs. Follow the steps mentioned below.

  a. Click Start, click all programs.

  b. Click Start and the right on the program that appears in the list and the removal of the location.

  You can also view the article mentioned below.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to disable programs and commissioning that run when you start Windows 7

  How to disable programs and commissioning that run when you start Windows 7

  Hello

  References to Vista also apply to Windows 7.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns shows you the complete list of
  Locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Monitor Monitor - free - file system, registry, process, thread and
  Activity of the DLL in real-time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

• The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  Hi KaraDay,

  When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.

  How to use the "files and Settings Transfer Wizard" in Windows XP

  http://support.Microsoft.com/kb/293118

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• I recently started getting the following message when I start Windows Mail: the message store was damaged by an external application to Windows Mail

  I recently started getting the following message when I start Windows Mail:

  The message store has been damaged by an external application to Windows Mail. Windows Mail has been able to successfully recover from this corruption. (0 x 000000000) there are also twop messages in my Inbox "not found" and I can't delete them.

  However no identoify not the application Windows and McAfee does not detect any virus.

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• I want the cursor to be in the address bar when you create a new window; It works for new tabs and a new private window, but not in safe mode.

  I tried following the advice offered in the different threads bit I found on this but nothing works out. I want the cursor to be in the address bar when I open a new window or when firefox opens without restoring a previous session. I solved the problem for new tabs via subject: config, but it does not work for the new windows. I tried safe mode and the problem persists. In a new private window, the cursor is in the address bar.

  A new window opens the homepage (default: subject: House) and not the new tab page (default: subject: newtab).

  Some of the built-in pages set the focus to the search bar on the web page, just like the Google site only.

  You can use a bookmark in the bookmarks toolbar that opens the subject: blank page.
  If you hold down the SHIFT key when you click this bookmark, then you open a new widow with this page.
  Otherwise, you need to set the home page to about: blank or on the point: about to have easy access to all the pages.

• Error loading C:windows\mstapox.dll, when you start Windows XP

  Originsal title: error loading

  When starting, I get the following message: error loading C:windows\mstapox.dll

  Does anyone have a solution?

  There is no file with this name in XP.

  In addition, there very few dll that must be load in the c:\windows folder and is not one of them.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  If that's really what you see, then your system is now or was hit by malware.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• No text at all in the address bar when you open a new window

  After update (last 2 I think?) currently 16.0.2 worm, when I open a link in a new window, there is no text in the adressbar. The reload or bookmarking a page like this does not work because the address is empty, I have to open the properties page copy the link, paste it into the address field and go to the page. He can not find any info on how to restore the previous working state. Present address in new tabs, links in the same window, etc.

  It's weird. Couple questions:

  Does it matter how to open new window, for example, if you (1) right click > open link in a new window, (2) shift + click the link, or (3) there is a pop up generated by the page?

  If you right click on the content of the page, the menu has a submenu 'this framework', which would indicate that the page is framed?

  Where this is caused by an add-on, a standard Diagnostics in order to avoid interference by extensions (and some custom settings) is to try the Mode without failure of Firefox.

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See back up and restore the information contained in the profiles of Firefox. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

  Then restart Firefox in Mode safe (questions to troubleshoot Firefox in Safe Mode) of Firefox help

  Help > restart with disabled modules

  In the dialog box, click "start mode safe."

  If the site is working properly, it points to one of your extensions or custom as the problem settings.

  To disable the plugins and extensions, you can try here:

  Orange Firefox button or classic menu Tools > Modules > Plugins category

  Any change?

• Satellite A200-22I - DHCP and SENSE of the problems when you start Windows Vista

  When I started my laptop yesterday, I noticed it was going quite slowly, more there was a message saying that windows could not connect to a specified service.

  As a result my firewall was off tour and I can t connect to the internet. I tried to turn on the firewall, but I couldn't... and today, I tried another connection to inalambric, but I couldn't connect to the internet.

  I checked the registry of the solution and the problem and found it was something related to DHCP and sense.

  But really, I don - t know what causes this problem...

  I searched other forums where people have had the same problem but I could t find any solution apart from reinstalling Vista...

  Can someone help me? Help will be very appreciated!

  Thank you

  Hello

  What do you mean with SENSE? I never heard tell about.

  I put t know what are the causes of the problem too but did you look in Event Viewer? Sometimes, it's really useful.
  If you have a network problem, you must update the driver WLAN or LAN (depending on whether you are using). You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would be interesting to know what Windows service, you mean. View more information on this error.

  Welcome them

• Not maximizing the task bar when you click on Windows Explorer

  When I place the mouse on the icon of the program in the taskbar Windows Explorer the small preview window/s is displayed but will not maximize in a large window.  When I click on it or right click "optimize" on the spotted, that nothing is happening.

  In fact, probably we maximize or restore, but off the screen where you can not see.  This happened to me sometimes as well.

  Try this:

  1. hold SHIFT key and right-click on the icon in the task bar (or right click on the preview you did).
  2. choose the entrance to restore if it is not gray.
  3 hold down the SHIFT key and click again on the icon in the taskbar.
  4. now, choose the entry of moving.
  5. without doing anything else, press one of the arrow keys (for example, the arrow on the left) of the keyboard.
  6. without anything click, move the mouse.  Your window should appear on the screen.
  7. click on the mouse to move the window, then you can resize or other to be where you want.

  I suspect that this is a problem in several screen of Windows 7 support, and that the window actually believes that it is off on another monitor, even if you have no other active monitor.

  -Christmas

• ' INVALID BOOT. Message from INI file when you start Windows XP

  I get the error message "INVALID BOOT. INI file"when I start the computer, but then, it goes into XP.  Could someone tell me please how to fix this?  I don't have the Windows XP CD because my friends brother died and they gave me the computer, and it was already installed.  I could get the CD if necessary, but I was wondering if there is a way to fix this without it?  Thank you in advance for your help!

  If you see a message like this:

  Invalid BOOT. INI file
  Booting from C:\windows\

  This usually means that the c:\boot.ini file is missing, but you can replace it.

  Miss the file would require a little extra work, since it is normally a hidden system, read-only file, but I can think of many things that is happy to remove it for you.

  If the system is working properly, what do you think happened to the system since the last time, he did not work properly?

  You now, or have you had the "Ask Toolbar" installed on your system?

  Do you now or nave already used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost, boost, gum, muncher. guaranteed or all that has an icon that looks like a key, the key or the screwdriver?

  In a facility only XP partition has not even need a c:\boot.ini file starts - he's going to complain, but this threshold always begin.

  You must create a new file c:\boot.ini.  It's just a text file, so you can use any text editor such as Notepad or WordPad to create a new file.

  Here is an example of a simple c:\boot.ini file you can copy and paste the text to a new file. :

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect

  When you get this text into your text editor, do a save as, and save the file as:

  c:\Boot.ini

  Answered in the affirmative if invited to replace the existing file.

  Then restart your system.

  If the file is missing once again, we need to understand why and fix it.

• How can I disable search suggestions in the address bar when I start typing?

  Starting with the most recent version, by typing en tapant in the address bar suggests Google search in addition to suggestions of history terms. How can I change to the previous offer only my story mode?

  In addition, this update seems to have removed the fill auto the address bar at the top of the suggestion page as I type. How can I return this feature as well?

  Thanks in advance.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes