Remove the VIB ISO

Similar Questions

• How to remove the password of BIOS - 4070CDS Satellite?

  Hello

  My wife just to get an old laptop work (Satellite 4070CDS) we want to use it as a pc for free internet access, which is just about everything for a small donation, I think that it was capable of. But bring it back, we have a problem

  He has a * password to logon *, which she didn't, and the company no longer exists, so we cannot get their hands on it.
  I downloaded an ISO boot disk to reset it, but in the BIOS options there is * no option to boot from the CD *.
  There is * no diskette drive *.

  Then I start, I get password screen. Is it possible I can get ontot his pc. I'm more of * happy to completely re - format * the machine and start again, but can't seem to do it again.

  Thank you very much

  KeV

  Hello Kev

  I fear that you will not be able to remove the BIOS password without special tools. I recommend you contact the nearest authorized service provider. For little money they will do it for you. They can do it in 10 minutes.

  If you have need for addresses and phone numbers visit http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• my computer sunddenly had a password, and I'm not one that says. Now I can't open my computer more. It is caused by a virus? What should I do? Is there another way to remove the password, without reformatting?

  I'm the only person who is using my computer.  And I know that I have does not have a password.

  It is impossible for us to know here if your computer is infected. See if you can connect to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you can get, go to control panel > user accounts and remove the password for your user account. Then scan your computer for viruses/malware by:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password (or have Pro/Media Center and use the administrator for your daily work and so is the administrative account only on the system), NTpasswd allows you to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/

  Then open a session with the password to blank (null) and make changes, scan, etc.
  MS - MVP - Elephant Boy computers - don't panic!

• Can I safely remove the Windows.old files?

  What's up guys?, I have a Compaq Presario supplied with the Windows Vista operating system, 32-bit. I backed up all my drivers on DVD and I downloaded a clean copy of Vista using an ISO on a DVD burner. I reinstalled the new copy put in my original product key, and he agreed. I reinstalled my drivers and all seems to work fine. I transferred all my data, mp3, jpeg, etc. for Flash readers and/or new programs on the new OS. The reason for the new OS was a virus infection which partially damaged the registry.  I really want to keep these files in the system for obvious reasons. Can I safely delete the files "Windows.old" and what would be the best way to do it?

  Hello

  The next message will be how carefully check for malicious software needed
  for, now or in the near future.

  --------------------------------------------------------------------------

  In the disk cleanup, is displayed as previously the Windows Installations.

  Start - type in the search box-> CONTROL the above disk cleanup - right Click-RUN AS ADMIN.

  How to remove the Windows.old folder in Windows 7
  http://www.SevenForums.com/tutorials/19151-Windows-old-folder-delete.html

  How can I remove the Windows.old folder?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  How to remove the Windows.old folder that is generated when you perform a custom
  Windows Vista Setup (also Windows 7)
  http://support.Microsoft.com/kb/933212/en-us

  How to remove and delete the folder Windows.old on Vista or Windows 7
  http://www.kodyaz.com/articles/delete-Windows-old-removal.aspx

  ===============================================

  If necessary:

  1. open an elevated command prompt

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  2 prompt probably like C:\Windows\System32 >

  This type at the prompt, and then press ENTER.

  CD\

  Now, the line should look like C:\ >

  3: This type at the prompt, and then press ENTER.

  Windows.old DIR

  Should resemble C:\>DIR Windows.old

  It should return

  C:\Windows.old directory

  and view the contents of Windows.old

  It's just to make sure that the Windows.old folder is under C: (drive C) - if she does not STOP

  4 this type at the prompt, and then press ENTER.

  Attrib - r - / s has s h Windows.old

  Should look like C:\>Attrib/s - r - a s h Windows.old
  (there are SPACES between Attrib and / s and r - and - a and -s-h and Windows.old)

  He should return to the prompt C:\ if it shows and ERROR and STOP - then check the command
  and if it has been entered correctly you are not in the right place.

  5 this type at the prompt, and then press ENTER.

  RD/s Windows.old

  Should resemble C:\>RD/s Windows.old
  (there are SPACES between the RD /s and Windows.old)

  Return Windows.old, are your sure Y/N Y type

  (If you get a message that you have no property rights then type this command
  and press ENTER.

  TAKEOWN /f Windows.old/a/r

  and repeat step 5 - were you using an elevated command prompt?

  6: This type at the prompt, and then press ENTER.

  Windows.old DIR

  Should look like C:\>DIR Windows.old - and press ENTER.

  It should return

  Directory of C:\

  File not found

  Which confirms that it is gone.

  
  7 close the COMMAND window

  =======================
  =======================

  Use the Safe Mode if possible - repeatedly, press F8 that you start.

  If necessary, use these utilities

  UnLocker 1.91 + (free) 32 and 64 bit versions.
  http://unlocker.emptyloop.com/

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN

  Below also work on both 32 and 64-bit Windows

  Another good alternative - use FileAssassin:

  FileAssassin - free
  http://www.Malwarebytes.org/fileassassin.php

  Force delete (cannot delete) closed or in used files or folders with FileASSASSIN
  http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-FileASSASSIN/

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN

  And this - MoveOnBoot

  MoveOnBoot
  http://www.softwarepatch.com/software/MoveOnBoot.html

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• remove the administrator name and password

  cannot update or download programs. pop up States 'type admin name'... but the area type in 'GRAYED OUT' help!

  If you had only an administrative user account and it is him that you damaged, all is not lost. You want to allow the built-in Administrator and create a new administrative user by general recommendations for the establishment of user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to log on to the built-in Administrator account.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• How to remove the system reserve of my computer?

  I installed Windows 7 Pro in Windows 7. I used a program of virtual drive to mount the iso of Windows 7. I then install Windows 7 pro. I started out in the 'new' Win 7 and let Windows do its thing updated and which do not. I have a Windows.old so I know that the operation went well. However, when I open the computer, he showed my C drive and an extra drive that I have 'E', but he also showed the system reserve partition drive. I know that this is part of the startup procedure so I know not, I can't delete it, but how do I remove it from my computer, where it shows all the readers of mjy? It wasn't until I reinstalled Windows (by that I mean the partition was there but does not in the window of the computer).

  To my knowledge, the partition of the reserve of should not be assigned a drive letter so do not appear in the window of the computer. My score is assigned to the letter G

  Hello

  Usually system reserved partition will not be assigned a drive letter. However, as you can see the score with a drive letter, I suggest you to refer to the article and remove the assigned drive letter:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

  Once you remove the drive letter, it will not in the computer.

  It will be useful.

• Cannot remove the NFS Inaccessible storage

  Trying to remove a read-only NFS mounting which serves my ISOs on ESX 5.5.  Here's

  I see the client user interface.

  

  Listing the NFS shares by esxcli shows nothing:

  

  When you try to create a new data store, the same NFS server and share, but different data store name

  I get the following error:

  

  Where can I delete the old data store?  There is no option to remove the existing directory 'iso '.

  data store:

  

  There is no "storage vendors' defined:

  

  And none of the 'settings' seem to be configurable:

  

  

  

  Any suggestion is appreciated.

  Dave

  It turns out it was snapshots.  I need to be more careful in the future and remove the ISOs of my virtual machines before you take snapshots of s.

  Dave

• How to remove hidden links (how to remove the links, ONLY the hidden parts of the document)

  in Acrobat XI-> after deletion "text hidden" using the tool 'Remove hidden information'-> links still remain in the hidden passage / cropped -> so the real question is - HOW TO REMOVE THE LINKS HIDDEN in a PDF. An approach may be to remove 'links, Actions and Javascripts' tool 'Remove' hidden information - BUT it removes links TO the WHOLE OF the DOCUMENT - "how to remove the links, ONLY the hidden parts of the document"

  Hidden text is the collection of glyphs in the PDF page using the text rendering mode 3 (no terms, no fill).

  The links set up in connection with this hidden text are not 'hidden' (this isn't how it works with annotations PDF link - see ISO 32000-1: 2008).

  Any link annotation placed in a PDF file are the same as any other annotation link (with the exception, of course, of whatever Action the link happens to).

  Thus, no special sauce for the links that were placed in conjunction with now deleted "no hidden text.

  In the context of what you wrote, maybe it's you select - Ctrl + click the link annotations of interest and press the delete key.

  Be well...

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• How can I download apps using iOS iPhone 5 s 10 and a waterproof case (without removing the case each time!)

  I have an iPhone 5 s protected by a waterproof case, secure screw using Allen.

  This command removes the possibility of using the ID of the contact.

  Contact ID is required by the App Store!

  I found a way around locking the screen, but not found how to circumvent App Store

  Have you disabled the following: settings > Touch ID & password > iTunes and App Store?

• How can I delete an email from apple mail after removing the content (by virus scan software?)

  Recently, I received an avalanche of emails with malicious attachments.  I have not opened any of the accessories, and my antivirus software has picked up malicious content and removed from the email.  Thus, I find myself with an email on my system, no content.  Unfortunately, the system does not allow me to then remove the (s) e-mail that is left.  How can I remove these 'empty' emails in my Inbox mailbox?

  ... my antivirus software has picked up malicious content and removed from the email.

  Allowing something to edit the database of e-mail will result by it becomes corrupted.

  If you use Time Machine, restore the email by "entering Time Machine" of in Mail and choose a time to restore. Then, just delete suspicious e-mails in the usual way. Exit full screen before entering Time Machine.

  You may not use software "anti-virus" not Apple on a Mac, for this reason and many others. Identify the product you use to get the uninstall instructions.

• Remove the entries in the playlist.

  I can't get rid of unwanted entries in the playlist.  There is no x in the top right and the items won't slide.  I'm on Yosemite 10.10.5

  Highlight the item in the playlist column.  Hold down the CTRL key.  Click on the item and options pop up.  Select remove the element.  Yes I know.  Why they have just under the X in the corner?

• You can remove the gaps between songs in itunes 12.5.1.21

  How can I remove the gaps between songs itunes 12.5.1.21

  Unfortunately, user control in playback gapless disappeared several years ago.  There are different things you can try. You can use a different ripper to rip tracks omitting gaps (see XLD).  You can set crossfade overlap packed during the silence between tracks.

• Change the orientation of the mouse. Click the apple icon, and then select check box on the left. However, this box is covered by a video on the use of the mouse. How to remove the video?

  Change the orientation of the mouse.  Click the apple icon. System Preferences; OK to this point; the area to select 'Left hand' is covered by a video on the use of mouse clicks. How can I remove the video (s) so I can't select 'Left hand' in the box?

  System Preferences > mouse, and then select the tab more moves.

  Then on the left, select: slide between pages

  Click scroll left or right with one finger , and then make your choice.

  You cannot delete the video. This is a demonstration.

• Under settings &gt; how to remove the storage data

  I went into settings > storage & use iCloud and I want to know how to delete data. For example in my mail application my iPad tells me that there are 796 MB. I emptied my Inbox, trash and sent the messages. Why is there so much use? In iMovie, I show 621 MB, that I do not use iMovie. How can I delete cache in my ios device?

  The simplest thing to try is a reset.  Press and hold the power and home together for 10 seconds until the Apple logo appears.

  That may well help your storage numbers.  If this is not the case, try a restore or remove the email account and reintroduce.

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support