Rename the Alu Stor E 2.5 drive "

Similar Questions

• How do you get the path of the data store or the URL of a virtual disk in vRealize Orchestrator?

  I need to eager zero a virtual disk while building a virtual machine. I found the eagerZeroVirtualDisk_Task() under VcVirtualDiskManager function, which takes in 2 parameters:

  name - (String) the name of the disk, is a path to the data store or a URL pointing to the virtual disk that needs to be inflated.

  Data Center - (VcDatacenter) if the name is a path of data store, the data center for the path of the data store. Not necessary when called directly on ESX. If not specified on a call to VirtualCenter, the name must be a URL.

  How can I get the correct path of data store given the virtual disk? I intend to iterate through the features of the virtual machine to get the disks.

  Thank you!

  Actually figured out how to get the path of the data store, and how a drive zeros. In case it is useful to share the code here:

  var vimHost = vm.vimHost; VM instanceof VCVirtualMachine

  var vDiskMgr = vimHost.virtualDiskManager;

  for each disk

  var features = vm.config.hardware.device;

  for each {(dev var in devices)

  dev.backing contains a lot of useful things...

  If (dev instanceof VcVirtualDisk) {}

  a disc!

  var dsPath = dev.backing.fileName;

  System.log ("path of disk:" + dsPath);

  Data var Center =

  System.getModule('com.vmware.library.vc.datastore').getDatacenterForDatastore (dev.backing.datastore);

  var vcTask = vDiskMgr.eagerZeroVirtualDisk_Task (dsPath, datacenter);

  wait

  var waitResult =

  System.getModule('com.vmware.library.vc.basic').vim3WaitTaskEnd (vcTask, true, 5);

  }

  }

• The data store name already exists

  Hello

  I have 3 hosts in my group and I am trying to add a 4th. The host, I'm trying to add part of the cluster, but it was removed there because it has been used a few weeks somewhere else. I have since reinstalled ESX and try to add back to the cluster.

  When I try and add a NFS data store to the host named "NAS-storage" added it is automatically renamed to "NAS-storage (1)", if I try the rename without (1) I get an error message...  "The NAS-storage name already exists." 3 other guests are currently connected to the data without any problem store.

  How can I fix it?

  I tried to reboot the host, restart the service of railway infrastructure and to rename the data store on the other hosts to something else.

  Welcome to the forums.

  Make sure that you add the store of data with exactly the same name/IP address and the name of path as those mounted on other hosts

  You can get the correct mount point by running

  esxcfg-nas -l
  

  Maish

  VMTN moderator | vExpert

  Author of VMware vSphere Design

  @maishsk | My Blog

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• Cannot find the backup store in DOCS n Toshiba drive external HARD to PIX

  Hi guys,.

  a few days back I have backup my loads of PIX and Documents TOSHIBA external HARD drive (3.5-inch USB 2.0 Black + Silver HARD drive, 2.5-inch USB 2.0 HDD Black + Silver) in-store "My PIX" and "My Documents" backup of your laptop. Now I'm trying to restore it on another laptop but I can't find them through TOSHIBA REGEN backup software. But first I couldn't find my music store of movies but the itch to get through 'repair catalogue' in the software... Has anyone asked similar problem as I do? Any help of suggestion will be highly appreciated.

  Thanks in advance!
  Nukesh

  Hello

  To be honest I m no owner of these HARD drives.
  But I wonder why you use the backup store to retrieve files

  Why you n t access HARD drive and just copy and past the files to another location

• How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?

  How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?)

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  There is no practical way to do it.

  If you do not enable iCloud Drive on your Mac, you can upload files to iCloud by car via the web interface at https://www.icloud.com

  But you can access the files from the web interface and won't icloud drive as drive in the Finder.  You cannot use the Finder to access the files. You need to download it to use.

• installed my windows 7 Home Premium on a new hard drive, but it says my key is invalid. I bought this copy of the microsoft store and have retained the email with the key.

  installed my windows 7 Home Premium on a new hard drive, but it says my key is invalid. I bought this copy of the microsoft store and have retained the email with the key.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  What is an upgrade?

  If so, you must install and activate a qualifying operating system before you perform the upgrade.

  For which version and edition of Windows the computer is allowed according to the COA sticker on the case?

• How to rename the pictures and the copy on a flash drive?

  I have downloaed a few digital photos on my PC of Windows 8 and want to know how A) copy on a flash drive and B) rename the photos? Help please. Thank you.

  Use the copy & paste the link below;

  http://Windows.Microsoft.com/en-us/Windows-8/copy-move-files

  'Rename files' > open your folder that contains photos and pictures you want to rename > L/click and highlight the file to 'Rename' from the selection panel is displayed select 'Rename' > enter new name > then R/click, if you want to rename every single file you must do this for each file/photo.

  or, you can rename the groups by R/click + (hold) shift key and the R / series of photos that you want to group rename them then L/Click-click and select "Rename", type name, IE: Xmas12, automatically rename files & no IE: Xmas12 (1), Xmas12 (2). "." etc.

• Rename files within the data store

  Hi all

  I'm trying to rename some folders and files in my local data store.

  That's what I see in my local data store

  /

  TestBiz-(il s'agit d'une machine Virtuelle)

  . SDD.SF

  TestNav-(il s'agit d'une machine Virtuelle)

  Apps

  images

  TestBiz contains

  TestBiz01.vmdk

  TestBiz01 - 000001.vmdk

  TestBiz01.vmx

  TestBiz01.nvram

  VMware.log

  TestBiz01.vmsd

  Now my problem is the following.  The names of the two virtual machines must be lit.  TestBiz must be TestNav.  If I rename not only the record, but the files themselves who will break my servers?

  I am aware of the mixture to the top, but I don't want others in the future to get confused.

  Any help would be great

  Thanks in advance

  Welcome to the community,

  There was a current discussion on VMs rename (change the name of files and folders in data warehouses) which also contains links to some articles in the KB. However, in your case, the virtual machine has an active snapshot, and you should definitely remove the snapshot before you rename the virtual computer!

  BTW. where the virtual machine is managed in a vCenter server environment, you can automatically rename the virtual machine by changing the name of the virtual machine in the inventory of the GUI and then he migrate to another data store.

  André

• How to rename the configuration files store data with downtime

  HI team

  I've renamed the vcenter client name. How to rename the configuration also files in data store with to take the time to stop.

  you have renamed virtual machines, and now you want to also rename the config files (vmdk, vmx and so on)?

  Just do a storage vmotion and the files will be automatically renamed...

• Add hard drive VCSA 5.5 to the data store

  I do the jump for especially vsphere client of web & VCSA 5.5 to change settings on a virtual machine on a host in a data center. The host has 2 data warehouses. The virtual machine has 1 hard disk assigned to datastore1. I go to add HDD to VM but can't find where datastore2 go through them.

  Non-Web client Vsphere 5.1 has allowed the addition of material. The wizard showed a location-> specify a cluster datastore or datstore. And then go to datastore2.

  If you have any information leading to the resolution of this problem, I got thank you.

  PatrickAZ

  Patrick,

  First, to add a new disk to a computer virtual, the data store where you create the disc must be visible to the ESXi host where VM works... If this is the case, follow the procedure in documentation ESXi: Add a new hard drive in a VM in the Web Client vSphere

• Renamed the external hard drive and now 5 Lightroom can't locate photos that were underway

  My husband uses Lightroom 5.  All of his pictures are saved and imported from an external hard drive.  Today it has renamed the hard drive, and later, when he went to the room open light, it does not find who he had worked on the picture.  Photos and those that it has exported are still on the hard drive, but he was still editing are not displayed.  Any ideas?

  Because Lightroom uses the hard real path for images, change the name of HD has broken this link. The best way to restore the link is to go in the library, make a right click (control click on Mac) the folders on the left side and select the location of the update folder. If the images are in a closed file as the top-level folder (recommended) digital capture needs updating. If there is a lot of files, then you will need to update each record separately...

• Swapping hard drives for change/increase the size of the data store

  Hello:

  I have an ESXi host 4.1 with 2x146GB RAID1 array (datastore1), 4x300GB RAID5 array (datastore2).  I need more space so I intend to replace 2x146GB by 2x2TB.  I'll first move virtual machines from datastore1 to datastore2, then stop the machine, Exchange records and build the new table.

  • What I need to remove ESXi cfg datastore1. before you physically remove the drives, or will start ESXi gracefully and allow me to remove the data store?
  • I'll be able to add the new data store (2x2TB) to ESXi, ago, i.e. ESXi should see table once initialized on the machine?
  • Existing data warehouses have 1 MB block size max vmdk is 256GB.  I want the new data store to have the block size of 8MB so I can have more VMDK.  I think I can fix the block size of data store when it was created, are, i.e. the ESXi installation can have warehouses of data with different block sizes, are?

  
  

  Thanks a lot for the ideas you have!

  
  

  Bob

  1.) why not just delete the GUI data store before you remove the discs?

  2.) If your controller has the disks properly there should be no problem with their detection.

  3.) Yes, each data store may have a different block size. The block size can be selected when creating the data store on disk/LUN.

  André

• Rename the VM and labels in data store locations

  I remember my days with vSphere 4 x that I had to rename a virtual computer once.   But, the vmdk/vmx partner, files etc. and even the record in the data store has not changed.   However, when I did a Migration of vStorage in another store of data with the virtual machine also migrate to a new host when it was finished... all sync'd up.   or that's how I remember it.

  But, I'm now told my my virtual colleague that rename a virtual machine and to migrate to vStorage and VM migration to a new host WILL NOT synchronize the naming and lables.  is that correct?  I am almost sure that it worked in vSphere 4.

  It was behavior that was introduced in vSphere 5. It has since been resolved in Vcenter Server 5.0 Update 2 and 5.1 Update1. See the article I've linked below:

  VMware KB: vSphere 5.x Storage vMotion is not renaming the files of virtual machines at the end of migration

• vSphere - external USB drive to the data store local copy

  Hello world

  Yesterday, I created this post: http://communities.VMware.com/message/2135813
  With your help, we managed to find the only way to install ESXi to ISO image to USB external hard drive is to be attached to the machine near her and run the Setup from there, cannot be done directly.

  Today, we need your help in the next step, as it seems.

  We have a Dell r.620 physical machine with VMware ESXi 5.0 installed U1. We have an external hard drive with the operating system installation ISO images, software backup and a little more.

  The question is - how to copy the data from the external USB connected directly to the ESXi host to the data store local disk on the host.

  Yes, we know that we can do in the way that connect us to the machine on the same location and copy it into the data from there store. But we would do it directly. And we don't very well see by ourselves or using Google Uncle again.

  Poor ability to research, or is not possible?

  Thank you very much for your help!

  The court to do is to use the Datastorebrowser or WinSCP

  ESXi itself can only read the Fat16 drives - so what looks like the short path is the long way ;-)