Rename the service profiles (2.1 and above)

Similar Questions

• Rename the Service profile after creating through model

  Hello

  first... I found a discussion earlier, but from 2010, so he's changed a lot. At that time, it was scheduled for a future implementation

  Creating profiles of server through service templatesalways adds a number (based on how to generate profiles).

  But I don't need this number. We have a nameconvention for servers on ends with a zero (such as abcd9000).

  So, how can I use the models without numbers (leaving blank does not work) .or how can I change the name of the new profile service?

  We run on the 1.4(3q) Version.

  Concerning

  Silvio

  Currently, it is not possible to rename the objects. What you can do here, use the creation of a Clone function that is available when you click on a Service profile existing (SP). This gives you the opportunity to choose a new name altogether and the location of the SP.a cloned. It is very useful if you use address pools in the SP master because the cloned SP automatically borrows a same pool addresses. If you're bored after clicking on create a Clone of 30 times, it's something that you can easily automate with the power of the UCS Toolkit (unit Powershell cmdlets 1300 +).

• Cannot auto close down and move the service profile to new server

  When the blade material is fail service profile will move to the new server in the server pool. but before the service profile move to the new server, the administrator must approve by clicking link to downgrade in the configuration of server pool. If I tested it by click decommissioning in Server Maintennance Menu work fine but tested by disassemble Blade Server, unmount HARD drive, start button / stop does not work the service profile do not move to the new server.

  I need auto service decommission and how I config it?

  When a service profile move again if material blade server fails?

  Unfortunately, the UCSM has no Automation like that today.

  Thank you

  Michael

• Rename the username under C/Documents and Settings?

  How to rename C/Documents and Settings/username folder?

  Hi sed12,
   
  -Why exactly you are trying to rename the Documents and Settings username folder?
   
  Rename a user account via the computer management console or the user accounts applet is not rename the associated user profile folder.
   
  Note: Although you can move or rename the user profile folder, there may be some side effects after using this method. For the reason that there may be a few references path absolute (to the old user profile folder) in the registry added by third-party software. Therefore, there may be a loss of functionality in the respective applications.
   
  Therefore, I you recommend to create an another user profile with a different name and then copy the contents of the current profile to the new user account.
   
  For more information, see these articles:
   

  Create and customize user accounts

   
  How to copy data from a corrupted to a new profile in Windows XP user profile

• How to give the Service profile name I want?

  Hello

  I wonder how I can make a model Service profiles and name them as I want.

  If I'm doing 2 Service profiles and want to we will call 026-server and server-027, the only way I can solve this must make 7 profiles of named Service Server-02 as a namespace prefix, then set it to the number 7

  

  This will make the Service profiles that I want, but I have to delete 5, because I don't need them!

  Is it possible that I can do a profile Service and name it what I want?

  / Stig sand

  Hi Stig,

  Don't create a clone not help?

  . / Afonso

• I've renamed the images in a file and now they are all out of control, how to make their return to the original order

  I opened a drive with my camera phone, then renamed the photos with brief descriptions, and now they are all out of order. How to make back in the original order they appeared.

  Dennis

  Renamed files are apparently to be sorted by alphabetical order.
  It is the normal behavior of Windows.

  If you open the folder in question and go to... View / details... and
  Select the column that says: "Date picture taken", she should use
  photos.

  Also you can drag and drop photos to change position.

  Once you have pictures in the order you need... you can re-
  Number them in a batch to maintain order.

  Just go to... Edition / select all... right click on the first file name and choose...
  Rename... Enter the next number...

  .jpg (10001)

  Press Enter and the remaining files will be named in the order.

  You can also add a word if you want to identify the group.

  Summer vacation (10001) .jpg
  (Yes, there is a space between the letter n and the first parenthesis)

• The updated profile in place and make it compulsory

  Hi all

  I tried to set up an internet café PC users to work so that they can check facebook etc. there own time since we almost all blocked now.

  The computer is configured with Win Vista latest service packs and just a standard user, first I tried to delete all the user profiles folder and when you sign in it just a temporary profile which we all know is erased when they connect loads. It was until I had complaints that whenever people had set up there IE etc so I was told to fix it.

  I recreated the profile folder and logged in as the user and set up the entire application and copied into the profile default profile and then deleted the profile again.

  Although this method works my manager dose not like the fact that when you log into a bubble appears saying "cannot locate your profile by logging in with a temp" so now im stuck.

  dose - what someone knows a way to implement a local profile so that if a user makes a change that they are erased when they log off and came back to the era where a new person connects again?

  Here is the procedure to open the local Group Policy Editor in Vista: http://www.vistax64.com/tutorials/222866-local-group-policy-editor-open.html.

  This is a webcast on how to use Group Policy in Vista: https://msevents.microsoft.com/cui/WebCastEventDetails.aspx?culture=en-US&EventID=1032292774&CountryCode=US that might help get you quickly informed about its functioning and the options available.

  Here is an article on various options of Group Policy (which none deal with your particular issue) but to give you an idea of the possibilities: http://www.howtonetworking.com/server/grouppolicy.htm.

  For example, you can create a shutdown script (do not use the Group Policy Editor, but another program) to restore the settings to default conditions.  You can in the Group Policy Editor define the program Internet Explorer by default by creating a default profile, and then selcting the option to import it.  Then each somone start the computer, the default profile will be used (by ignoring the changes made by the previous user).  There are many more options and settings strategy group - too many to name.  I couldn't find a specific who handled your question - but I think it's possible by using a number of different group policies work in tandem and cleaning all the options available during disconnection (or at least get pretty close - I don't know if it is possible to restore it COMPLETELY to the same exact condition).

  What yuu really want is a standard user profile, that works like the guest account or a temporary profile without using the guest account (which you should not do) - and I'm not sure it's possible, but it may be possible to approach using the above procedures.  Or maybe we can find a way to captured to eliminate the message appear when access to the temp account - but I suspect that this implies a change to the registry, and I don't know where to look same fo such a thing.

  I don't know if it helps.  Even if you were able to reach the goal in your last sentence, it would also erase the internet settings and you'd be at square one.  Why can't you just give them all a user profile standard special for this machine (or machines) and then use Group Policy to limit what they are able to change (but allow them to change their internet settings).  In this way each user will have its own configuration when they connect - even it may vary a few users in the context of limitations.  Learn more about group policy and how you can use to restrict access and functionality may be to the point where individual accounts are acceptable and users cannot change anything which might affect other users.

  Please post back if you have any other questions or just to let us know how things go.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• associate the service profile to the server

  Hello

  Only I got this error when you try to assign a service profile to a server

  configuration failed
  Reason for the failure: problem with the boot order, possibly not found vhba or start target not found

  Is that the association of service profile requires connection to the San to be configured and have the correct pwwn to the objectives in the strategy of starting?

  As I have already configured 2 vhbas and a start-up strategy

  Thank you

  Most likely the name of your vhba in the profile service and start-up strategy do not match. can you please send screenshots?

• While updating my profile facebbook, I clicked on the 'block profile image' option and a notification popped up that Firefox cannot display images on my profile. I can't access the pictures on my facebook page. How do I reverse this order?

  Cannot display profile pictures of friends and me, instead, Firefox displays only the names, fewer photos. I need to have the images released so that they can appear on my page. Kindly help. bold text

  Is he missing pictures then make sure you are not block images from certain domains (sphotos.ak.fbcdn.net).

  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

• How can you add more options of basic research for the Service Profile Configuration Directory profile

  In the CUCM, under Service Profile Configuration.  I created a service profile.  In the profile directory section, I can only have 3 Research Bases.  I have 6 domains I have to link them.  They are in a forest.  How can I extend the search to users?

  It is with regard to the Jabber Clients.  I can't find the users in the second research base.

  IN the LDAP authentication, it allows only 2 additional redundant LDAP servers.  Why not add each of them?

  Thank you

  Cathy

  Hi Cathy,.

  Please take a look at the following link: Jabber - config.xml

  I hope this helps.

• Rename the file name background layer and move up

  I need a script that I can run at the end of an action to rename the name of the background layer and move it to the top of all the layers and hide visibility.

  That's what I want the layers of final document to look like, of course "filename" is the name of the file of the document itself. If I can change it to .jpg instead of a tif which would also be very useful.

  I use CC 2015 the more up-to-date version.

  

  I found these scripts that are not exactly what I need, but close and I can't understand how to manipulate.

  Script layer moves

  Open, do, and rename the layer "Julieanne Kost's Blog

  Update: now, I think that this may be totally useless. Because of this, I wanted the original filename.jpg was so I could export the image as an asset later on the road. I just tried to create the image assets and found that it creates a folder for each file, so if someone can think of a better way, awesome.  I was able to create action and move all my layers of setting down instead of trying to move the layer of file name up and it worked, but because each file name is different I can't select and hide in my action. There is a solution simple but do not do exactly what I need.

  Thank you!

  Brandi

  #target photoshop;
  app.bringToFront();
  if(documents.length){
  var doc = activeDocument;
  doc.activeLayer = doc.layers[doc.layers.length -1];
  if(doc.activeLayer.isBackgroundLayer){
      doc.activeLayer.name = decodeURI(doc.name).toString().replace(/\..+$/,'') + ".jpg";
      doc.activeLayer.move(doc.layers[0], ElementPlacement.PLACEBEFORE);
      doc.activeLayer.visible = false;
      }
  };
  

• Change the storage profile (PAF) policy and apply to the home and VMDK

  Hi there, I need to change the policy of storage on a cluster with a value of virtual machines. I have follow-up vSphere PowerCLI 5.8 PAF Walkthrough (part 1): Introduction | VMware vSphere Blog - VMware Blogs, specifically, run this:

  Get-Cluster "mycluster | Get - VM "myvm.local" | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

  This applies to the new political profile is stored in the folder 'home' of the virtual machine, but do not know the VMDK, where the virtual machine is not consistent with the policy. How can I do so that it changes the policy I'm specifying the House and all the vmdk on the virtual machine.

  Thanks in advance,

  You must define the strategy of storage on hard drives as well as in an additional command, for example:

  $vm = get-Cluster "mycluster | Get - VM "myvm.local."

  $hd = get-disk hard - VM $vm

  $vm | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

  $hd | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

• Speed up the Lightroom like a madman to rename the files in your catalog and forcing LR to use Smart Previews

  I saw this tip posted at http://www.slrlounge.com/speed-adobe-lightrooms-performance/ , and I can't believe the performance gain.

  I also can't believe, that's why LR not swtch to the use of smart insights once that you have made instead of working directly with the raw file. WHY should I have to manually rename a file to LR thing in their use?

  Hi VidNoob,

  Lightroom was designed in this way he would read previews smart in scenarios where the Raw files are not available.

  The main advantage of having smart insights is to allow editing while travel when you don't have access to raw images or if your raw images are stored on the external hard drive and you do not want your external hard drive connected to your machine always.

  For this reason, you will need to rename manually or somehow tip Lightroom for not to use raw if files you want to access the intelligent insights.

  Kind regards

  Claes

• How about Firefox for the iPhone from Apple 5s and above.

  Is that possible or you hold by Apple software policies?

  Mozilla seeks to have a browser of sorts for iOS in next while however it will probably not use the same browser and JavaScript engines who say using Firefox on the desktop and Android computers due to Apple restrictions. A lot of the so-called browsers are shells.

  https://support.Mozilla.org/en-us/KB/is-Firefox-available-iPhone-or-iPad

  The article does not really much information as I imagine the article will be updated as more information will be available.

  Mozilla did have an experimental browser for iPad in mid-2012 called Junior, but he has not used the Gecko engine because of the restrictions.

• Dependent Service in UCSM material of blade profiles? Is that we can assign the same service to a B200M2 profile, B230 M2 and a blade of B200M3?

  Dependent Service in UCSM material of blade profiles?

  Is that we can assign the same service to a B200M2 profile, B230 M2 and a blade of B200M3?

  An example: if my B200 M2 goes down because of a hardware failure, I replaced the same slot with a B200 M3 Blade.Then is possible that I have separate Service of B200M2 profile and associate the same Service profile with B200M3?

  Hi Deepak,

  It is certainly possible.

  If there is no problem, because of incompatibilities, it triggers a failed configuration error, the service profile is related to the new blade.

  I hope this helps.

  Thank you

  Michael