Similar Questions

• screenshot label selected in the comboBox in a VAR and poster with a submit button

  I looked through the assistance several times and searched for tutorials on the net. Docs support I found led to write the following code (the code was attached to the instance of the comboBox) that did not work. The button send does not send the label I'm trying to capture in the "subject" VAR
  
  on {(change)
  function() {}
  subject = contactReason.getSelectedItem () .label;
  }
  }
  
  I tried to look for a week and have had some progress - I didn't know how to use the components at all before that. I have asked for help or a specific tutorial but have not found something that will work the way I need to.
  
  I tried to change my code to the following (code is associated with the instance of the comboBox) after that someone suggested something different - but it did not work with my shipment button either.
  
  on {(change)
  var object: String = contactReason.selectedLabel;
  }
  
  contactReason is the name of my comboBox instance...
  
  my button to send messages to a CGI page that sends the information to an email - using power reactive as topic etc (there are areas of seizure in the form along with the ComboBox) with the following code (the code is attached for send button)...
  
  on (release) {}
  loadMovieNum ("formdone.swf", 2);
  recipient = "[email protected]";
  loadVariablesNum ("/ cgi-bin/cgiemail/contact/contact.cgi", 0, "POST");
  }
  
  input boxes still work properly and pass other variables, but I'm getting no subject (I make if I use an input box - but not with comboBox)

  I fixed it. I realized that I had forgotten to remove my send button the following

  on (release) {}
  loadMovieNum ("formdone.swf", 2);
  recipient = "[email protected]";
  loadVariablesNum ("/ cgi-bin/cgiemail/contact/contact.cgi", 0, "POST");
  }

  but once I did it - I only got an email - but is the one who says no "set" where the selected comboBox label should be. Apparently the right e-mail address that I was getting came from my button send, not your script. So I took the parties send and the success of your script and put my loadVariablesNum on my button script send and it works perfectly with the way your treats storing the selected comboBox label.

  I couldn't have done it without you... Thank you!!

  now all I have to do is determine why the tutorial on customizing the comboBox items does not work for me. I could not Exchange on a completely new theme - but when I tried edit items from the library of one and then apply it AS my document - no change. I'll mess with it some more. I think I'm getting components a little more when I tried first. So next. Wish me luck!

  Thanks again! I really appreciate that you take time to help the scripts!

• How to hide a multiple selection of the TableRegion element dynamically

  Hi all

  I have a requirement to hide the column multipleselection area of table dynamically. Based on the id liability multipleselection column must be disabled or hide.

  I gave the following code to set the fake rendered property.

  	OATableBean tabBean = (OATableBean) webBean.findIndexedChildRecursive ("SearchTable");
  	Salt of OAMultipleSelectionBean = (OAMultipleSelectionBean) tabBean.getTableSelection ();
  	sel.setRendered (false);

  But it's not working. Someone help me in this.

  Thank you and best regards,

  Myvizhi

  Hello

  Try using the code below:

  (I found this on the blog of Mukul

  Oracle of Mukul technology blog: dynamically change multiselect for single select statement in table of the OAF)

  Hide Multiple selection

  OAAdvancedTableBean tabBean = (OAAdvancedTableBean) webBean.findIndexedChildRecursive ("[table item id]");

  Given that multiple selection is at the end, get the total-1 to remove

  int count = tabBean.getIndexedChildCount (pageContext.getRenderingContext ());

  System.out.println ("number of children" + count);

  tabBean.removeIndexedChild(count-1);

  Sushant-

• The Form(10g) hung who have the ComboBox list item when it runs on JRE

  Hello

  I am facing a problem with the drop-down list box. It works fine on JInitiator, but it doesn't work on JRE (Java). I searched the OTN community that everyone says that the 3 patches must be applied. Is there an alternative solution.

  Developer version

  Forms [32 bit] Version 10.1.2.0.2

  OS: Windows xp Service Pack 3

  Application server:

  Version10.1.2.0.2

  OS: Linux Red Hat

  OS: Windows Server 2003

  Best regards

  Zafar Iqbal

  Zafar,

  There is a known bug with the ComboBox element in Oracle Forms 10g R2 (10.1.2.0.2).  This has been fixed with patches 3 Group (which requires a contract for Support of Oracle download the patch) is why Micheal recommends that you install this group of hotfixes.  If you do not have a support contract - your options are: 1) not to use the ComboBox element. (2) upgrade to the latest version of Oracle Forms on the Oracle Technology Network (OTN), which is Oracle Fusion Middleware 11 g R2 (11.1.2.2.0).  (3) Finally, continue to use the Oracle Jinitiator.

  Craig...

• ComboBox does not display an element selected when the masking

  Hi all

  I have a combobox in the layer that lies beneath the mask (layer mask). It does not display an element selected in particular in the chrome browser (version 14)

  When click the combobox drops down and display items, but when making the specific item selected, it does not appear.

  Please help me solve this problem

  Vishal parekh

  Embed your fonts of textField comboboxes.

• Help Popup not rendered HTML based on the referenced element.

  I have a named item & P104_GENDER on a page that references a hidden item, which is calculated using a calculation that uses a database function to retrieve data to help for the item and fill in the hidden element.
  
  So for this article, is the source of help & P104_GENDER_HELP. & P104_GENDER_HELP is filled with "Please enter a sex. Possible values are: & lt; BR & gt; -Male & lt; BR & gt; -Female' according to the debugging session.
  
  
  When I click on the label to display the context-sensitive Help window, it displays: "Please enter a sex. Possible values are: & lt; BR & gt; -Male & lt; BR & gt; -Female. "
  
  Apex 3.X, the HTML would render correctly and it would display:
  
  Please enter a sex. Possible values are:
  -Male
  -Female
  
  But in Apex 4.0, it makes just the text as if it had no HTML implementation involved form, i.e. "Please enter a sex. Possible values are: & lt; BR & gt; -Male & lt; BR & gt; -Female. "
  
  However, if I put the source directly for help on the question "Please enter a sex. Possible values are: & lt; BR & gt; -Male & lt; BR & gt; -Female", without reference to the hidden item, it renders properly in HTML format.
  
  I tried to change my label template to use javascript:popupfieldhelpclassic instead of the javascript:popupfieldhelp function, but I get the same wrong result.
  
  When I looked at the source that is generated in the pop-up window when you reference an element hidden, is to convert the < and >, symbols of "& lt" and "& gt" respectively, which means it does reference the text from the element hidden in the form of literal text and convert anything that resembles HTML in plain text instead of treat it only as HTML. I can see why this would be useful for some people, but it's not so useful to me, especially since he is used to the opposite effect.
  
  They have both have in common, is that they use the wwv_flow_item_help.show_help function. I guess that the culprit lies in this encapsulated code.
  
  Anyone has an idea on how to work around this problem so that text coming from referenced items analyzed and presented in HTML format instead of literal text?
  
  Thank you very much.
  
  Published by: user12021046 on December 15, 2011 13:51
  Changed for good formatting HTML :-)

  Ah, now I understand!

  So I think the problem is, when you click the label, he calls a procedure that returns the text of help via AJAX. In my view, this procedure escapes html tags, and from what I can tell, there is no setting to disable. :( Even if you load classic help, these tags are also escaped. There may be tweaks that I don't know, but I looked into the security of the shared components section, but nada.

  So a possible solution?

  If you look at the label, you'll see that it links to the following function:

  function popupFieldHelp(b,a){
       if(!$x("pScreenReaderMode")){
            apex.jQuery.getJSON("wwv_flow_item_help.show_help?p_item_id="+b+"&p_session="+a+"&p_output_format=JSON",
            function(c){
                 var d=apex.jQuery("#apex_popup_field_help");
                 if(d.length===0){d=apex.jQuery('
  '+c.helpText+"
  ");
                      d.dialog({title:c.title,bgiframe:true,width:500,height:350,show:"drop",hide:"drop"})
                 }
                 else{
                      d.html(c.helpText).dialog("option","title",c.title).dialog("open")
                 }
            })
       }else{
                 popupFieldHelpClassic(b,a)
       }
       return
  }
  

  A quick and dirty solution would be to replace the escape with their html tags characters so that it is rendered correctly

  that is, add the following:

                 c.helpText = c.helpText.replace(/</g, '<');
                 c.helpText = c.helpText.replace(/>/g, '>');
  

  -These forums are not keep what I write here, I'm sure you can understand what im speak well.

  Of course, change the label template to point to your custom function.

  The other solution I was going to suggest was to write your own application process that gets you some JSON - Martin D'Souza has written a blog on the use of the apex_util.json_from_sql; which is what you would probably use a query such as:

  select label, item_help_text
  from apex_application_page_items
  where item_id = apex_application.g_x01
  

  The problem is the text of the done element refers to another page, so it would return to the value chain e.g. & P12_ITEM. of course it wouldn't be to hard to get around.

  for example, select replace (item_help_text, '&' | apex_application.g_x02 |'.) (', v (apex_application.g_x02)) item_help_text
  of apex_application_page_items
  where item_id = apex_application.g_x01

  (not tested)

  and then as a quick primer to a way of doing AJAX

  1. create a htmldb_Get object: helpText var = new htmldb_Get (null, null, "APPLICATION_PROCESS = nom_processus");

  Where nom_processus is the name of an application process that you create

  2. Add the necessary parameters

  helpText.addParam ("x 01', 'itemId')
  helpText.addParam ("x 02', 'P12_ITEM')

  This is to add temporary variables that can be reference via apex_application.g_f0x; the alternative is that you can add paremeters State session with

  helpText.add ('nom_element', 'ITEM_VALUE') and get sent when you call the object's get() function.

  3. get the JSON and parse
  obj = JSON.parse (helpText.get ());

  Then create the http://jqueryui.com/demos/dialog/ for the help dialog box

  ..

  Well I hope that gives you some ideas / a starting point.

• In labview so I select all items in the drop-down list, the corresponding elements of the need to change page

  as an example of

  If I select the first item - drop-down box, in the page it should only show digital controls 1 and 2

  If I select the second element - drop-down box, in the page it should show only digital commands 3 and 4

  If I select the third element - drop-down box, in the page it should only show digital controls 5 and 6

  because i really new for the labview.

  None of the answers thank you.

  There you go

• Can not set a value by the executed dynamic action on the page element "selection list."

  I created an agenda of the page 'list of selection' and I want to when I change a value in another element of the page set only 'screen '.

  I created a dynamic action on the page element "selection list" for this.

  These are the dynamic action attribute:

  When:

  ======

  Event: change

  Selection type: point

  Article: P29_PURCHASE_ORDER

  Condition: No strings attached

  Advanced:

  ========

  Scope of the event: static

  Identification:

  ==========

  Action: Set

  The ' Action Page when the changed value "attribute of the element of 'list of selection' = 'None', and when I run form the dynamic action run and set the value for once and do not update the value according to the change in the article"list of selection. "

  Note: when I change the previous attribute of 'Redirect and set', dynamic action run and properly value, but the value was hidden soon

  I want to value when the value of change of select list according to this change successfully.

  Please, advice me,

  Best regards

  Mustafa Ezzat

  Hello

  you set the value of the 'Page elements to submit' to P29_PURCHASE_ORDER?

  Then, the SQL statement would use the current selected value.

  This is the help text says: "specify a list separated by commas of the elements of the page that will be submitted to the server and therefore available for use in your"SQL statement"," PL/SQL Expression"or"Body of the PL/SQL function".»

  Kind regards

  Erik-jan

• Photoshop 2015: BUG? Layers panel auto-fait scroll to top when you select the text element with the text, creation/copy of layer tool and other actions

  This is a bug or a really bad and frustrating idea for a story.

  (1) in the layers panel, select a text layer, it highlights

  2) change to the text tool

  3) click on the text element in the workspace

  OR

  (1) select a layer in the layers panel

  (2) Ctrl-J, new layer by copying

  EXPECTED: Panel layers rest in the same position

  REAL: Panel layers scrolls the element selected or new layer to the top of the Panel. BORING.

  I do not need or want Photoshop to make decisions for me, space to work around to move without asking, or generally to spoil my flow!

  Please fix this or give me an option to turn it off as soon as POSSIBLE.

  

  You have successfully updated to 2015.0.1?

  The bug known as in the original message has been fixed in this version.

• Failed to get the objects displayed in the 3d element when I select the form replicator &gt; 3D object

  I was watching a tutorial on how to use the replicator forms to make a 3d object outside slot a particular form. I selects two primitive shapes and set one on the table Replicator and other particles of the atom. When I open my scene and change my form replicator 3D object disappear all my forms. I couldn't find anything on the internet about this problem yet and this is the only mistake (if it is not a user error) that I have ever met in the 3d element. Thanks in advance.

  If you have any questions about element plugin 3D video Copilot, I recommend to ask on the video Copilot site in forum 3D of the element:

  http://www.VideoCopilot.NET/forum/viewforum.php?f=42

• Select all the elements in VARRAY

  I am being selected in a table where all IDS are in a VARRAY I populated. I searched online and on the forums and cannot find an answer. Help is greatly appreciated.
  
  E.G.
  
  SELECT ID in BULK COLLECT INTO p_ID_1 FROM tbl_name WHERE contained_by = p_ID;
  v_id_1: = v_id_1();
  
  I'm IN p_id_1.first... p_id_1.Last LOOP
  v_id_1.extend ();
  v_id_1 (v_id_1.Last): = p_id_1 (i);
  END LOOP;
  
  -so far, my VARRAY is filled very well here's where I have a problem:
  
  SELECT the BULK COLLECT INTO p_id_2 FROM table_name_2 WHERE contained_by IN v_naid_1 ID (1);
  
  Everything works fine when I run the query. The problem is I want the query to select where the contained_by (all ELEMENTS in varray). Not only the first. How can I do this? I do "FIRST" thought "FINALLY" somehow? I can't list all the elements because there may be thousands.
  
  Thank you!

  jihuyao wrote:

  (not tested)

  And will not pass the test. First number uses the COUNT method in SQL:

  SQL> declare
    2      v_deptno sys.OdciNumberList := sys.OdciNumberList(10,20);
    3      v_empno sys.OdciNumberList;
    4  begin
    5      select empno
    6        bulk collect
    7        into v_empno
    8        from emp
    9        where deptno in (select v_deptno(level) from dual connect by level < v_deptno.count);
   10      for i in 1..v_empno.count loop
   11        dbms_output.put_line(v_empno(i));
   12      end loop;
   13  end;
   14  /
        where deptno in (select v_deptno(level) from dual connect by level < v_deptno.count);
                                                                             *
  ERROR at line 9:
  ORA-06550: line 9, column 76:
  PL/SQL: ORA-00904: "V_DEPTNO"."COUNT": invalid identifier
  ORA-06550: line 5, column 5:
  PL/SQL: SQL Statement ignored
  

  This one is easy to fix. But while you'll get:

  SQL> declare
    2      v_deptno sys.OdciNumberList := sys.OdciNumberList(10,20);
    3      v_empno sys.OdciNumberList;
    4      v_cnt number;
    5  begin
    6      v_cnt := v_deptno.count;
    7      select empno
    8        bulk collect
    9        into v_empno
   10        from emp
   11        where deptno in (select v_deptno(level) from dual connect by level < v_cnt);
   12      for i in 1..v_empno.count loop
   13        dbms_output.put_line(v_empno(i));
   14      end loop;
   15  end;
   16  /
  declare
  *
  ERROR at line 1:
  ORA-06532: Subscript outside of limit
  ORA-06512: at line 7
  

  Why? The binding occurs before execution. Mandatory if v_deptno (level) will try to assess the level BEFORE the time of execution and therefore level is not set. Currently (this may change in the next version) before executing Oracle treats level 0, then you could try level + 1. This will not throw an error, but you will get incorrect results:

  SQL> declare
    2      v_deptno sys.OdciNumberList := sys.OdciNumberList(10,20);
    3      v_empno sys.OdciNumberList;
    4      v_cnt number;
    5  begin
    6      v_cnt := v_deptno.count;
    7      select empno
    8        bulk collect
    9        into v_empno
   10        from emp
   11        where deptno in (select v_deptno(level + 1) from dual connect by level < v_cnt);
   12      for i in 1..v_empno.count loop
   13        dbms_output.put_line(v_empno(i));
   14      end loop;
   15  end;
   16  /
  7782
  7839
  7934
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  As you can see everything we returned is deptno = 10 employees. Why? Because it does not an affair occurs just before the execution, but is also a TIME. That is why the subquery:

  Select v_deptno from dual connect by level (level + 1)<>

  produces two rows with the same value of v_deptno (0 + 1).

  Hope you got the image.

  SY.

• Use the button to select the Combobox choices?

  Hi all

  I have a combobox (called "style_cb") and that you have guseed you can use to select a "style."

  The site also contains photos and I would like users to be able to click on the photos (which are the buttons) and have the combobox control

  automatically the value of this option.

  So, if the options in the drop-down list are "oranges, apples, pears, cherries" and the images are the same fruit.

  then by clicking on a picture of a fruit (say "cherriesBtn") would set the drop-down list for this option box.

  I played a little and I read the help - searched the net but no joy so far.

  All gurus like to help them with what I imagine, it's a fairly simple thing?

  Best wishes

  Tony

  You can use the selectedIndex property of your combobox:

  {cherriesBtn.onRelease = function ()}

  style_cb. SelectedIndex = 3;

  }

• How to use the Combobox selection to check one of the six boxes?

  I have a combobox with 6 choices ["' (0), RED (1), ORANGE (2), YELLOW (3), GREEN (4), BLUE (5)" "] and I want to place controls in one of the six boxes.

  The comboboxes are all named fnfCB-box, and each of the six have an export value of 0-5, match the choices I can make from the drop-down list.

  If a choice is made in the drop-down list box, the correct checkbox must be checked. If no choice is made in the combobox, no boxes must be selected.

  What are my next steps? Most of the tips seem to work the other way (click on checkbox, update list dropdown value)...

  You can use a custom script to strike for the drop-down list box:

  // Custom Keystroke script for combo box
  if (!event.willCommit) {
      getField("fnfCB-box").value = event.changeEx;
  }
  

  Select the 'value selected to validate immediately' option to the drop-down list box.

• How to set the item selected when particular comboBox Executive?

  I have a comboBox with all elements with the data and labels (defined in the parameter of the comboBox). However, I can't put the comboBox data element to display when the frame, like this:
  
  var listenerObject:Object = new Object();
  listenerObject.load = {function (eventObject:Object)}
  _root. DBI SelectedIndex = 3;
  };
  _root. CB.addEventListener ("load", listenerObject);
  
  What's wrong?

  You cannot use the load event on a framework, because at the moment where the code executes, the element has already been loaded. But what you can do is to set properties directly in this context wihtout the need of an auditor. Just write this line instead of all of the previous code:

  _root. DBI SelectedIndex = 3;

• Resize the Combobox selection button (arrow head)

  Hello everyone

  I'm developing an application for use in a tablet. Everything´s works fine except that the combobox control that I use is really difficult "hiring" cause it s size, not the text box, but more particularly the selector to display items. I need to make bigger somehow. Please need help how can I achieve this.

  Thanks in advance, Esteban.

  Did you change the editing mode of the key icon to the icon of tweezers?  When you do this, you can change the individual components that make up the control.

  I recommend you watch the LabVIEW tutorials online
  LabVIEW Introduction course - 3 hours
  LabVIEW Introduction course - 6 hours