Reorganization of the sections in the dashboard
Hi allIs it possible to re sections of the dashboard command?
I created two guests when I put both of them in the dashboard, they are one under the other, instead, I want that they are in contact.
How is that possible? Plese help.
Thanks in advance.
Yes
You can use option to have horizontally in the same section...
what you will find in the Properties section...
Don't forget the need for 2 guests in the same section
Thank you & best regards
Kishore Guggilla
Tags: Business Intelligence
Similar Questions
-
reorganization of the tabs on the dashboard in OBIEE 11 g
In OBIEE 11g. I created a dashboard with three pages/tabs.
Using the interface of the dashboard is a way to reorganize my pages?
As now, I see on my page. Tab 1, Tab2, Tab3.This is the order in which I created it, but now I want to have my third tab in the first tab, tab 3, tab 2, tab 1. I don't see any option that I have administrator privileges...
I remember in 10g, there is an option under Administartion and catalog management, but in 11 g, inder Administartion, I see no similar option.
Thank youYou can reorder pages within a dashboard in 11 g.
(1) change the Dasbhoard and go to dashboard properties.
(2) you will see the list of pages and reorder the pages to your list.-Bilodeau
-
Hide sections in the dashboard based on the user group
Hello everyone
Can I find out if certain sections of the dashboard can be hidden using guided the usergroup-based navigation? Links to this topic... I appreciate.
Thanks in advanceHello
guided navigation is the way to go. Now, you think to demand that triggers the guided navigation.
Now, you can not use double in a normal request in OBIEE. If you need to use an existing column in a topic area:
(1) for example, add column 'Calendar year' of the size of your time at your request.
(2) add the same column at your request.
3) click on the fx in the second column column, to change the formula.
(4) modify the formula to: LOCATE ('GroupName', VALUEOF (NQ_SESSION. GROUP OF))
The value in this column will be 0 when the user is not a member of GroupName and > 0 when it is a member of GroupName.
(5) add a filter on the column: LOCATE ('GroupName', VALUEOF (NQ_SESSION. GROUP)) is equal to 0.Check the results:
When the X user is member of GroupName, demand will cause no line. When the user X is not a member of GroupName, it won't.A note: when using 'A' as a groupname, you will have problems with this, because 'A' is also in "Administrators".
-
several guests in a section of the dashboard
Hello
Can anyone help me pls my request. I wana keep several guests in a single section of a dashboard (obi ee 10.1.3.3.2) that behaves INDIVIDUALLY *, so that on which gives the values in edit box each guest would give the result affecting composed mode retained in the other section, for each of the selected item in the drop down each of a command prompt.
Concerning
Asif Husain KhanHello
See this link below it may be useful
http://sranka.WordPress.com/2008/11/09/how-to-replace-multi-go-button-prompt-by-one/
Concerning
NGO
-
Hidding in the dashboard Section
Hello
Can someone help me on this please
The requirement is to make a dynamic dashboard where I want to hide some views in the article. IAM doing a Top 10 customers of revenue to regions of the United States, EU, AP. and I gave a dashhboard page guest like "REGION" for the United States, the EU and the AP. This time, I have created a section of the dashboard with three different views for US, EU, AP
If I select any region from the prompt, I should be able to see the three points of view and if I choose the American region, the views of the EU and AP should be hidden. How to get there?
any help will be greatly appreciated.
Thank you
LindaOn the page of dashboard edition, there are properties for each section to set. One of them is the guided navigation. With a guided navigation, you can show or hide a section, according to the results of another query. When this 'conditional' request return lines, you can decide to show (or hide) the section.
First, you must create a separate section for each request. "When you select" US "in the dash prompt then only indicate the section with the American report. The other sections need to be hidden, no?
You must now create conditional queries, which means that 'US' is selected in the dashboard line:
(1) the conditional request for U.S. section must return lines-> U.S. section will be hidden
(2) the conditional request for the EU section should not return lines-> section EU will be hidden
(3) the conditional request for the AP section should not return lines-> AP section will be hiddenThen you must think wisely how to create these conditional requests.
You can consider a request now only the column of the region.
Then you add two filters:
For the request of condtional US:
(1) region is equal to (protect US this filter with filter option)
AND (2) region is invitedTo demand parole of the EU:
(1) region is equal to EU (protect this filter with filter option)
AND (2) region is invitedTo demand parole from AP:
(1) region is equal to AP (protect this foli with filter option)
AND (2) region is invitedWhat happens when you select EU in the dash prompt:
The conditional request US not returns no lines-> U.S. section will be hidden.
Demand of the EU conditional returns to lines-> section EU will be visible.
The request of condtional AP don't returns no lines-> AP section will be hidden.Kind regards
Stijn -
Can't see the dashboard LifeCam HD - 5000
Be great if someone can help to understand why I can't see the dashboard for my new lifecam HD 5000. video stream live appears on my screen, but there is no control that I could find then can capture video for usuage later.
Thanks - hugh
http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=019
Find out if the learn more section helps you to y.
http://www.google.com.au/search?hl=en&q=How+to+use+HD+LifeCam+5000.&aq=f&aqi=&AQL=&OQ=&gs_rfai=
And there are 2 Youtube videos listed at Google on how to use it.
See you soon.
Mick Murphy - Microsoft partner
-
Driver problem for the dashboard of media
Hello
I installed the dashboard of media today, but there is a problem. The first time that an SD card is inserted in the jury he identified OK. After the withdrawal of the security, it is not identified more and cannot be opened. I need to restart the PC (Windows 7 64-bit) to open a card again. What is the solution to this problem? The seller has no drivers and said Windows 7 should identify the device.
Hi Alexander,.
If this is the scenario then, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.
Step 1:
Uninstall the device from Device Manager
- Press the Windows key + R to open Run box.
- Type devmgmt.msc in the run to open Device Manager.
- Expand the USB section.
- Find the USB device.
- Click with the right button on USB and select Uninstall.
- Select the check box delete the driver for this device.
- Restart the computer after the uninstall is complete.
Step 2:
Uninstall the drivers of device from the list of programs in the control panel
- Click Start, select Control Panel
- Now, click on programs and select programs and features.
- Find the USB.
- Right-click USB driver and select Uninstall.
- Restart the computer after the uninstall is complete.
Step 3:
Download and install the latest drivers for the USB on the manufacturer's Web site
Keep us.
Kind regards
-
Change the dashboard 'summary of active host.
Hey everybody! I'm new to Foglight (using 5.6.5), but I was instructed to create a dashboard that will appear on a screen in the office. The dashboard is supposed to be the same as the summary of active hosts, who was created by default, the only difference being that it should only show servers 'Production '. Now, it seems really simple (and probably), but I've been struggling with this project days. I feel like I should just be able to copy summary of active hosts and make a quick change to the context and specify that it should Prod servers and not all servers, but I didn't understand how to do this.
I was wondering if anyone has any advice on how to go about it? Am I right in assuming that I can just copy the AHS and change some of the settings? What I have to change? I've tried a few things, but to no avail. I hope this isn't a stupid question, I just jumped in the middle of it and trying to learn as I go. If you need additional information or screenshots, let me know. Thanks in advance, it is greatly appreciated!
Dashboard active hosts summary
Production group
The host summary view active is a sharable view, so you can add it to your own dashboards.
1. create a dashboard from the action panel
2. in the control panel actions, select the view tab
3. open the host section in the view tab
4. drag the host summary view in the middle of the screen
5. create a Service in the Service of guests of the Production Designer. Call the Service Production hosts and then add hosts to the service
6. in your custom dashboard, in the summary of the host view, select Service selector, then select service Production hosts
David Mendoza
Foglight Consultant
-
UCCX cuic: Failed to create the dashboard
Hi all
My user is to have a role as administrator & Reporting in UCCX, as well as the role of Dashboard Designer in cuic. However, the user is unable to create the new dashboard / subdirectories (all grayed out option). I'm under 10.5.
Is there a required additional configuration?
Thank you!
-JT-
JT,
See the information below regarding the creation of dashboards:
1. no default reports user doesn't have permissions to create dashboards directly under the parent directory even if they provided the role of Dashboard Designer.
2. the Super user/administrator can create subcategories and provide writing and the declaration of the user execute permissions so that they can create dashboards in this subcategory.
The same is documented in the section create subcategory of the document:
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/cust_contact/contact _...
Therefore, connect in cuic as the Super user and create subcategories for the users of necessary reports and provide write/execute permissions after which they will be able to see the dashboard and work under this
Run below command from primary UCCX CLI to discover the Super User CUIC
Run sql select * from mmca_propertydef where propertyname ='OAMP. Superuser"
In this case, you are not able to remember the password for the user that you get after running the above command, you can still set a new Super user and the password by using the UCCX primary CLI commands below:
reset_application_ui_administrator_name utils
reset_application_ui_administrator_password utils
Concerning
Deepak
-Rate of post - useful
-
Look And Feel to the dashboard
Hello
I've developed reports obiee lately as part of my training activity. I came across a few examples of reports from google, and I find them very professional and much better than what I have created. I enclose several images here, the first 3 images contains the dashboard I created and the fourth example of google report. Can anyone help me design dashboards that seems very professional?
Hello
Firstly, it is good to say that "professional research" is subjective, that it is better to look for is probably not uniformity.
You're not too far honestly...
First point is that you use a lot of sections. If you use many sections of your page uncheck the option 'Folding', it will hide the upper area of the sections with the icon to the left. If you don't need 3-4 sections just use a unique, not need a section by element. Hide borders of your sections, so you don't see all the blocks in your page.
These few things will do it look better already.
Another point is style: keep the colors, fonts, size uniform etc. in your objects.
You have a blue, black, yellow, grey background on some of your lines, you really need different colors? Really have a meaning? If this is not the case, just use a single.
Start there and don't forget to make things uniform.
-
Hello
I have a line of dashboard (scope: Page), when the user selects the value in the command prompt and click on apply an another guest of dashboard (hidden section) fills the values and then this variable of presentation is mentioned in the report.
Question: Refresh the guest placed in the hidden not part and assign the value to the variable of presentation.
For example:
Section 1 > prompt dashboard
(1) from the Date
(2) Id analysis: (guest of cascade, founded date selected)
Variable presentation: pAnalysisId
(3) moral: by default all the values in the column
Section 2 > fast dash (apply button then refresh is disabled)
Analysis of parent IDs:
See the value: select 'parent_anlysis_id' from 'SubjArea1' where 'id of analysis' to (@{pAnalysisId})
Default value: Select 'parent_anlysis_id' from 'SubjArea1' where 'id of analysis' to (@{pAnalysisId})
Presentation Variable: pParentanalysis
Report:
The report columns
Legal entity | Balance (Parent) | Balance (analysis)
Column report form:
Balance (Parent): Filter (using fact-Analysisid Balance to (@{pParentAnalysis}))
Balance (analysis): filter (using fact-Analysisid Balance to (@{AnalysisId}))
Report filters:
Legal person is invited
Analyzes facts Id is equal in @{pAnalysisId}, @{pParentAnalysis}
Only the pAnalysisId happens. The presentation variable analysis Parent is not to set.
NOTE: If I display the section in which I placed the guest of the dashboard for the Parentanalysisid, the report works very well.
If someone has encountered this problem, please guide.
Kind regards
Shruti
Problem is solved. The problem is in the report, all the filters have been based on variable presentation, which was not refreshing with prompt hidden values. Add a column with "is"lead"in the report and now values happen.
-
Not able to change the dashboard analysis knowledge
Hello friends,
I am applying 8.5.1.4 patch for OBIEE by following instructions from '8.5.1.4_README.htm' below:
Header 1 Apply the changes of knowledge analysis dashboard
- Connection to Oracle knowledge Analytics using a link http://< host_name >: 7001/analytical
- Go to the dashboard of knowledge analysis on the dashboards tab
- Change the dashboard
- Click the Properties tab 'Text 1' under the Column1-> Section 1 to replace the HTML in step 7.
The problem is that as soon as the dashboard-click change option belo illustrated:
I am facing the error of privilege as shown below:
The user from where I am currently editing has all possible roles, as indicated below in 2 pictures:
Please let me know how can I change dashboard. What Miss me.
=============================================EDIT 1=================================================================================================
I think I'm coming to the solution.
That seems more like a browser problem. I'm looking inside and will return soon.
Thank you
ADI-
Ok. If it was a browser issue. Things were not visible correctly on Chrome (ver 37) and IE (version 11). I then tried on IE (version 9) and Firefox (ver 32) and it worked!
Concerning
ADI-
-
Hello
Is it possible to purge all hides automatically the dashboard every time when I run the dashboard in OBIEE 11 g?
You must change each report in your go to achieve this. Go to advance tab, in the section of prefix after the set DISABLE_CACHE_HIT = 1; and click on apply button, save your report.
This should help you.
-
The .article file size view of the dashboard
Is there a way to look at the file size of an article of in the dashboard? some converters API and/or article download files section generated directly to the cloud of Adobe and so a local version of the article does not exist. How can we consider the file size of the articles auto-téléchargées?
There is no way to do it from the dashboard unfortunately.
Neil
-
Capacity issues - information planning does not appear in the dashboard / rims reports
Hi all
I'm still getting my head around time involved with the collection of data for projects.
I had a data manager, collection of information on approximately 200 systems in 2-3 weeks, still in the dashboard I don't see any information I want to learn.
If you look at the attached screenshots, you will see for the dashboard of the company, I have a 190 systems all in my a project for this company. Among them, only 2 have started to show that they have inventory. In data manager himself most systems already have some inventory information, but this has not filtered through the dashboard yet, apart from these two you see here.
In my summary inventory systems capture screen you can see a lot of systems that display zeros in all of the inventory. In data manager if I find the system data, I can see his stats for most servers on all sections.
So I have two questions:
- Should I worry that this info does not yet show after 2-3 weeks?
- How could I go to take 3 systems in this collection and the pulling of data using custom reports? I created a separate project for these three systems, added to them, they have 2-3 weeks of data collection already, but when I run my custom reports on these systems a lot of data is empty and does not appear do not, even if these three systems have all data and performance data I need when I view on the data Manager server.
Any help would be greatly appreciated.
Sean
It resembles a P4 dual core with hyperthreading
But yes, it seems 'normal '. Thus, the collector operates.
Here's the thing... If you add systems to the collector and then create a data sync before the first inventory collection... you ship a bunch of zeroes on the scoreboard.
the collector will not send new data after the first synchronization, unless you use the full export option.
- Should I worry that this info does not yet show after 2-3 weeks?
Maybe you are looking for
-
contacts of OSX fails to import archived contacts
Initially, is saw 100 copies of four of my contacts (iCloud sync'ing enabled). To try to solve the problem, I performed the following steps: 1. take the MacBookPro offline (no internet, disabled iCloud contacts). 2 clean up duplicate contacts. 3. exp
-
Using iMac & El Capitan (vanilla all except for the email client Thunderbird instead of Apple Mail) Receive a screen message announcing that an update of Thunderbird was available but could not download because "you don't have permission! Thunderbird
-
Project Explorer does not open.
I'm using LabVIEW Professional Development System Version 8.0.1. Any attempt to open the Project Explorer causes LabVIEW close. If I select the executable version in tools it causes LabVIEW close. Any suggestions?
-
I can't publish my movie, he will not go beyond 10%
I made a movie in movie maker and tried to publish... such attempt got the second attempt of 5% arrived at 10%, I then did a test with some of my photos, videos and audio used in the film and published, I can watch on my playstation on the TV. I have
-
'my' recovery disks to recover 'his' presario c700
Hello can someone help me with this one? someone contacted me asking if he could borrow my recovery disks. We have... the same computer laptop presario c700, but my c794tu is more recent than hers... I forgot what model, but it does not mention it wa