Repair a 64-bit MBR using a 32 Bit DVD

Similar Questions

• When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.

  Re-installing Dell inspiron 19 has windows 7

  People,

  I have a Dell Inspiron 19. The Dell of Dell diagnostics disk utilities & drivers say all right. It is a Seagate 320 GB drive. I installed the drive on another computer and used sea tools to erase the disc.  Then I created a partition and marked as "bootable".

  When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.  A few pixels logo show and then it's there.  Any ideas?  I worked on it for several days.  Really a "stumper" for me and I did something like that for years!

  Original problem seems to be a massive viral infection (owner had no active antivirus software installation!) which led to the non-bootable computer.  After working on this for a while, I decided to just do again it.

  Miles

  Located in the beautiful valley of the Shenandoah in Virginia

  Hello

  Here's how to use the Dell Windows 7 disc according to Dell:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_362048&isLegacy=true

  If you have problems with it, try to Support Dell because it's their software:

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

  Or try the Dell Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  And these are some Vista Forums you are in.

  In Forum Windows 7 install:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  See you soon.

• When I try to run system repair ffrom originally Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt"

  Original title: when I try to run the system repair ffrom the original Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt" is anyone know the solution for this problem? Thank you, Kelsey.

  The message arrives as soon as I select "repair system" can not find the file on the Windows Dvd.

  Hello

  1. why you try to run the system on your computer repair?

  2. when exactly you receive this error message?

  If you receive the error message while booting from the Windows Vista DVD it means that the file i2omp.sys is corrupted.

  You may need to make arrangements for a Windows Vista disk that corresponds to the same edition, as it is installed on your computer. Later, try to repair the system on your computer.

  How to replace Microsoft software or hardware, order service packs and replace textbooks?

   
  Reference: What are the system recovery options in Windows Vista?

  Hope the helps of information.

• Windows Vista 64 - bit DVD

  Hello.

  I have a DVD of windows vista 32-bit and a license key. I want to change my operating system to Windows Vista 64-bit. According to my understanding, Microsoft provides these DVDs to addresses. How can I request this DVD in India?

  Thank you!

  Dr. gangloff

  Hello

  Microsoft sells more than Vista.

  I suggest you borrow a DVD for sale at retail or OEM System Builders Vista 64-bit of a friend.

  You can borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Unable to change the base installation of Windows Vista Edition language family by using the restore Vista DVD

  I have Fujitsu Siemens ESPRIMO Mobile (laptop) with pre installed Windows Vista Home basic. It is in the English language.

  When I want to re-installed Vista using (supplied with Labtop) restore DVD, after the installation, it is in Arabic. I tried to change this language but I can't. Could you please help to solve this problem.

  Thank you

  Hello

  You will need to contact Fujitsu about this.

  You cannot change languages with Vista Ultimate and Enterprise.

  You can have a different result if you try reinstalling using this method.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• 64-bit DVD

  I'm looking for a 64 bit DVD of Vista Ultimate (all languages).

  I have a 32 bit OEM and DVD (all languages) license, but I would like to reinstall it to 64-bit...

  The only problem is I don't have a DVD rom 64 bit and I would like to know if it is possible to download an iso somewhere.

  I searched already, but I can only find cracked versions, suggestions or links where I could download an original version?

  Microsoft sells more than Vista.

  As your Vista 32 bit is an OEM license, you can buy the 64-bit version.

  Online: try Newegg, Amazon, etc. to buy Vista

  Or try your computer repair store.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Is it possible to completely recover VistaOS using only the recovery DVDs?

  Hidden WinRE partition has been deleted by mistake, but I still have the original recovery DVD for my A200.
  Is it possible to completely recover VistaOS without the WinRE partition, using only the recovery DVDs?

  Of course.
  The Toshiba Recovery CD is designed to recover the laptop.
  Using the recovery CD you will get factory settings.

  But note; the Toshiba Recovery CD format the whole HARD drive and erases the HARD drive partitions.

  Welcome them

• Using Vista Ultimate upgrad DVD on the new machine

  I upgraded my computer which had OEM Vista Home of Windows Vista Ultimate Edition by buying an upgrade DVD, now 'only' computer died and I want to improve my new computer that has Vista Home OEM Vista Ultimate using the same Upgrade DVD. The final result uses the DVD to upgrade on a single computer, because the first died. How can I transfer the liscense to this software Vista Ultimate Upgrade to my new computer?

  Perform the upgrade to Windows Vista Ultimate as you normally and if you are unable to activate over the internet, then select the alternative "activate by phone".

• Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive. We will ask for a driver

  Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive.  We will ask for a driver.

  I did will need you you will need to Prime boot in the BIOS and set to boot from it.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• Windows 10 repair disk 64-bit

  I have 4 PC's using Windows 10. I did a repair for a disc. What I have to do a repair for each disc or if necessary, will only work on any PC. They are all 64 bits.

  Thanks in advance for your help.

  WDG

  Hello:

  As long as they are for the same version of the W10 (Home or Pro), one of the disks will work on all systems 64-bit W10.

• Service of any necessary repairs as a result of using expired ink or HP Photosmart D7260 printer

  I use Windows 7 64-bit.  I changed two inks this morning, a black and a blue.  Blue ink was very good.  Black ink error said, "Printer service for necessary repairs as a result of the use of ink expired."  I bought all the colors of the ink at Staples only a couple of months.  So, I hated to do it, but I opened another black ink and installed, and I get the same message.  Because of this message, I can't print anything, and I can't get beyond the error.

  Hey there jverzola,

  According to this article:
  http://support.HP.com/us-en/document/c01427780

  Try to remove and replace the cartridges in place until the error disappears. You can also check if there is dried ink or any debris in there that could cause a problem.

  I hope this helps!

• reinstalled Windows XP to repair corrupted Win Professional OS using the XP CD... sytem will restart just

  Windows has become corrupted and I reinstalled XP to repair my OS... by using the Windows XP CD and the repair option by reinstall/repair installation of Windows XP Professional on the C: drive.

  The system now starts to load XP and poster then a blue screen error for a second and then restart the computer and that's all what he will do. I tried to reinstall again and has just the same... Please let me know how I can fix my OS, I need to repair the operating system XP on the Hdrive.
  I need to repair the installation because I need to recover important files...

  Would really appreciate your help...
  Thank you
  Michael

  GhostyKnight,
  Make sure that you have tried the options listed in this thread: XP without boot troubleshooting.
   
  When you are in the Windows Advanced Options menu you have the option 'Disable the restart in the event of system failure?'   If you select this option, and then instead of restart it will be stops on a screen with an error message.  Then, you can search for the error message or post in this thread and we can help with the search in there. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Startup Repair puzzled a bit

  I'm having some trouble with the computer indicating computer Launcher ends unexpectedly dcom needs to close

  I have avg that was ran nothing
  I ran ARO and repairs
  I ran malware and repaired
  I did the hard dsik melody above and optimized

  I found the instructions of startup repair and I'm working on it but has quickly to a problem.

  the user name and password... its a username already registered, but I have no idea what is the password?

  any advice would be greatly appreciated

  Thank you

  Hello sahm2boys,

  We will make sure that your system is clean, see below:

  Try to start your system in safe mode:

  Restart your computer if it is running. Press and hold the F8 key for 3 seconds after your computer powers initially on. Once you see the Advanced Boot Options menu (or beep) you can stop. Up/down arrow keys to highlight your selection. Select Mode safe mode with networking and press ENTER. You should see drivers loading, it may take a few moments. You should then be at the Welcome screen. Connect to your computer using an account with administrator privileges. Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan done remove anything it finds. Simply restart your PC to see if your problem has been resolved! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Impossible to restore the MBR using Bootrec.exe

  I recently installed Ubuntu with Windows 8 so that I got dualboot. After a while, I decided Ubuntu wasn't my cup of tea, and I wanted to remove and restore the partition that it used for the Windows partition. I also wanted to restore the MBR. According to this guide , I have deleted the two volumes dedicated to Linux and extended Windows partition. When the computer reboots, I discovered that something had happened to the Grub - I guess I deleted something I shouldn't. It now shows the following during startup:

  GNU GRUB version 2.00 - 19ubuntu2.1

  Minimal BASH like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible completions of device or file.

  grub >

  Type the comand "output" translates a start meny quite similar to the old one (Grub):

  

  I can boot Windows as normal by choosing option 3. The USB at the bottom is my recovery disk. Booting from it, I can enter the command prompt. I tried all the options of Bootrec.exe as described here:

  

  However, it is always the GNU GRUB, which is displayed when you restart. I noticed that the /ScanOS and /RebuildBcd States that total identified Windows installations is 0.

  I also tried to export and delete the BCD store and then rebuild using the following commands:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  However, this is reflected by the following:

  

  Someone has ideas how to restore my old MBR?

  Update:

  After fully cleaning my drive, the Gnu Grub has disappeared. "Just remove my files" did not help.

  

• try to find a way to load CS6 on my Mac while my PC is being repaired? would like to use it on a platform...

  Is this possible?

  If the serial number is for Windows platform only, you can not use it on Mac

  If the serial number is cross-platform, you can use it on both Mac and PC.

  .

  However, for the time being, you can install CS 6 on Mac as trials until the PC is back from repair.

  Download Creative Suite 6 applications