Repair of bootcamp after the new partition

Similar Questions

• Bootcamp lost after the new partition (try to increase disk space for the window)

  I have Version OS X El Capitan 10.11.2. Here are the details on my system.

  

  So I tried to increase the space in the partition for the training camp by using disk utility. I created the new partition. But now I can't bootcamp while I restart the computer and hold down the option key. I tried this in the terminal:

  sudo fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  writing or w (tried both)

  There

  But it does not seem to pick up my bootcamp windows. I also tried to restore the mac as early date of backup via external hard drive, but that doesn't seem to help either.

  Here is the screenshot of the output. Any help would be appreciated. Thank you.

  

  Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Fix bootcamp win7 partition after the new partition

  Hello!

  I have Macbook (Late 13) and OS X 10.11 installed beta and windows 7 in bootcamp.

  At first, I left 65 GB for Win7, but a few days ago, I decided to increase the size of bootcamp, so I created a new partition of 'Untitled' (~19.91 GB), thus improving the Win7 partition. Then I saw that the Win7 partition disappeared from the "alt-option charge" and the utility to your startup disk.

  Attached screenshots.

  I hope I can get help here.

  

  

  

  

  

  Can you post the output of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

• Win 8 does not work after the new partition, Lenovo Thinkpad W530... Can anyone help?

  Hello I am new to this community

  Have you thought about set SYSTEM_DRV as bootable?

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Bootcamp has not finished - how can I continue installing windows on the new partition?

  Hi thanks for reading me.

  I started the bootcamp, it created the partition and install windows started 8.1.

  He asked for the location of the reader, so I chose my USB hard disk (read here which was possible) - SSD space is such a premium.

  I was told that the format of the disc is not FAT GUD, so I gave up installing.

  I used the disk utility to reformat the external hard drive.

  How can I get the windows partition now rerun the installation process?

  I tried the OPTION start upward, but the new partition does not show yet.

  Any help would be really appreciated.

  ~ Paul

  the partition windows 8 must be greater than 30 GB

  After that, please review the documents of Apple Computer

  How to install Windows using Boot Camp - Apple Support

• Firefox does not take after the new update homepage

  After the new update of firefox, it resets my setting of the home page that I made
  Randomly, it loads a search engine called search.conduit.comof interfalls.

  How can I stop this!

  You can check in "Windows Control Panel > programs ' recently installed programs see if something of conduct appears.

  • Control Panel > programs > programs and features > uninstall or change a program
  • Click the installed column to sort by this column

  You can open the topic: config page through the address bar and to search for the prefs that refer to led and reset associated user defined prefs ("BOLD") through the context menu on the default value.

  • http://KB.mozillazine.org/about:config

• Will I need to re - install Win 7 after the new motherboard

  I have a 'new' machine unfortunately screwed up. (It is refurbished, but many questions).

  I probably get a new motherboard. The technology will be able to transfer the credentials to Win 7. I ask because on the Thinkcenter and my Y480 I reinstalled Win 7 NINE times and have now good things.

  Basically, I really want to start rebuilding this machine with a lot of software, but if I have to reinstall after the new motherboard Tuesday I could wait as well. :-(

  DRM for pointers.

  For anyone following the answer is NO (less if done by the engineer).

  I asked support if the engineer should be port on my serial number for the new Board of Directors (Windows now finds the system not on a sticker card serial numbers). I was told 'no '.

  Of course, the engineer DID. My data has been flashed to the new Commission and Windows never saw a difference.

  Another wasted a few hours back up things.

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• Is it possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition?

  Partitioning of a Windows 7 computer

  On a laptop Windows 7 HP, it is possible to partition the hard drive by using software like Partition Master, install XP and an earlier version of Office on the new partition? I know I can run Win7 XP mode, but many prefer a base XP environment. Yes, I have new copies unregistered XP and Office 2003.

  TIA,

  Steve

  Besides Partition Master you can also use Windows 7 "Disk Managment" to shrink the partition of Windows 7, create a new partition of the space "unallocated", and then do a formatting NTFS "Full".

  Installing dual Boot with Windows 7 and XP
  (Read each method in this article and that fits your needs)
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  EasyBCD allows to appear more user-friendly boot menu:
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• Is it OK to delete the update number 2 after the new update has been entered IE number 6 of the same program?

  to delete the update number 2 after the new update has been entered IE number 6 of the same program

  original title: he is allowed to delete the previous updates of files

  Hi Carl,

  I suggest you go through this article to Java which can be useful.

  Why should I remove old versions of Java in my system?

  Removal of previous versions of the .net Framework is based on the applications that are running on the computer.

  For applications, if you have an application based on any .NET Framework on the computer, you cannot delete it since you have need to support the application runs correctly.

  .NET framework 3.5 SP1 includes .NET Framework 2.0 SP2 and 3.0 SP2. This means that .NET Framework 2.0 and 3.0 can not be deleted because they are the sine qua non of .NET Framework 3.5 SP1. If you have any application based on .NET Framework 3.5 SP1, please do not remove .NET 2.0 SP2, 3.0 SP2 and 3.5 SP1.

  I would also not to uninstall the security updates that are important for the security of your computer.

• Create the New Partition of the former created Partition

  Mr President.

  I use Windows XP SP3 OS with 4 Drives (C, D, E, F) hard partitioned. The size of my hard disk is 250 GB. I create forgettably drive E: Partition of greater capacity (Say 85 GB) memory space. The E: Partition holds about 35 GB of space free and remaining serve the space. I need to create the New Partition (G :) free space in the E: 35 GB Partition saying. ) The reason to ask for the help of the u. Please answer me as soon as possible.

  Hello

  Make sure that you have free space in each drive for better performance. When free disk space reaches 200 megabytes (MB) or less in a car, you will be prompted to free space in the disk.

  See the below items to create a new partition.

  How to use disk management to configure basic disks in Windows XP
  http://support.Microsoft.com/kb/309000

  How to partition and format a drive hard using the Windows XP Setup program
  http://support.Microsoft.com/kb/313348

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• Resize C: and add the new partition F: and THEN run HP_recovery - will be the F: partition survive?

  Hello!

  I resized C: and added another F: partition to back up my documents, pictures, etc. If I run HP_recovery, will she also shaped the new partition F:?

  I don't want THAT to happen...

  Babby, I don't think that the restore CD or partition will allow for the collection of partitions.  They will create a single partition only.