repair of directx
I installed nfs mw, but I have a prolblem with directx because he says that I need the version 9 .0c, so I downloaded. then he said that I already have this version. I tried to uninstalled but it can not be uninstalled. I downloaded directx SDK August 2009, but when I installed there is a message that says: mistakes were enciuntered during the execution of a process, and the installation program could not continue. Check the logs for more information. Error code: s1023
Hello
Method 1:
You can run the DirectX Diagnostic tool
http://Windows.Microsoft.com/en-us/Windows-Vista/run-DirectX-Diagnostic-tool
In addition, run Setup of DirectX end-user Runtime Web
Method 2:
You can also consult the knowledge base article and check if it helps:
How to download and install DirectX
http://support.Microsoft.com/kb/179113
Tags: Windows
Similar Questions
-
How can I uninstall/reinstall/repair DirectX 9.0?
I bought and downloaded a game from Big Fish Games. The package came with an update of DirectX 9.0, as is necessary to play the game I bought. I couldn't play games I downloaded because DirectX keeps freezing. I ran dxdiag and tested. When I tested the DirectX 3D it froze. I tried to download the same program from Microsoft to see if that would prompt an automatic repair, but it would not install it because it was already installed. I also tried to uninstall it from my Add/Remove Programs, but it wasn't the case to find. I have a Wiindows XP service pack 3. How can I solve this problem?
Try to re-install or, if necessary, uninstall and then reinstall your video card driver. That should reset the pointers and let it work. Dxdiag should show your version as DirectX 9 .0c (4.09.0000.0904).
Most of the games that install DirectX will allow you to cancel and continue with the rest of the installation. If you are already at the latest version, which would be best to do.
If all else fails, you would probably have a Restore Point created at the time you did the initial installation of the game. Restore to this point.
SC Tom
-There is no such thing as TMI if you request technical support. -
DirectX 11 preventing me from playing games!
I have Windows 7 32-bit, a 8800 GT 512 MB vid card. When you try to play World of Warcraft and Dragon Age: Origins I crash repeatedly. I don't have these problems when I had XP and directX 9 .0c. My video drivers and BIOS are all up-to-date and current. I have the dxdiag info if it helps. I was wondering if I could go back to the version 9 .0c or uninstall DX11 and then install 9 .0c?
Here are my system specs:
Windows 7 32 bit
4 GB of ram (DDR2 5300)
8800 GT 512 MB vid card
Map its X - Fi XtremeMusic
Card mother Intel D945Psn
Pentium D 820 (2.8 Ghz)
Westinghouse 24 inches (1920 x 1200)Here's my dxdiag Info:
Any suggestions would help a lot.Information System
------------------
Time of this report: 07/01/2010, 18:48:02
Computer name: HOMEPC
Operating system: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
Language: English (regional setting: English)
System manufacturer: INTEL_
System model: D945PSN_
BIOS: Default system BIOS
Processor: Intel (r) Pentium (r) D CPU 2 .80GHz (2 CPUs), ~2.8GHz
Memory: 3326MB RAM
Available OS memory: 3326MB RAM
Page file: 1075MB used, 5574 MB of available space
Windows Dir: C:\Windows
DirectX version: DirectX 11
DX setup parameters: not found
User DPI setting: 96 DPI (100%)
System DPI setting: 96 DPI (100%)
DWM DPI Scaling: disabled
DxDiag Version: 6.01.7600.16385 32 bit Unicode------------
DxDiag Notes
------------
Display 1 tab: No problems found.
Sound tab 1: The file ctaud2k.sys is is not digitally signed, which means that it has not been tested by the Microsoft Windows Hardware Quality Labs (WHQL). You may be able to obtain a WHQL logo driver from the hardware manufacturer.
Audio tab 2: The file ctaud2k.sys is is not digitally signed, which means that it has not been tested by the Microsoft Windows Hardware Quality Labs (WHQL). You may be able to obtain a WHQL logo driver from the hardware manufacturer.
Input tab: no problems found.--------------------
DirectX Debug levels
--------------------
Direct3D: 0/4 (detail)
DirectDraw: 0/4 (detail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (detail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (detail)---------------
Display devices
---------------
Card name: NVIDIA GeForce 8800 GT
Manufacturer: NVIDIA
Track type: GeForce 8800 GT
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_0611 & SUBSYS_C8023842 & REV_A2
Memory display: 1904 MB
Dedicated memory: 497 MB
Shared memory: 1406 MB
Current mode: 1920 x 1200 (32 bit) (59Hz)
Name of the monitor: generic PnP monitor
Monitor model: L2410NM
Monitor ID: WDE5180
Native mode: 1920 x 1200 (59,950 Hz)
Output type: DVI
Name of the driver: nvd3dum.dll, nvwgf2um.dll, nvwgf2um.dll
The driver file version: 8.17.0011.9562 (English)
Driver version: 8.17.11.9562
DDI version: 10
: Model WDDM 1.1 driver
Driver attributes: Final retail
Driver Date/size: 20/11/2009 18:34:54, 9333352 bytes
Would be WHQL logo: Yes
Date stamp WHQL:
The instrument identifier: {D7B71E3E-4551-11CF-A87E-09E81CC2C535}
Vendor ID: 0x10DE
Device ID: 0 x 0611
SubSys ID: 0xC8023842
Revision ID: 0x00A2
Strong name of the driver: oem4.inf:NVIDIA_SetA_Devices.NTx86.6.1:Section003:8.17.11.9562:pci\ven_10de&dev_0611
The driver rating: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
Deinterlace caps: {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
D3d9 Overlay: support
DXVA-HD: support
DDraw status: enabled
D3D status: enabled
AGP status: enabledWhere did you get the impression that DX11 is the source of the problem? WoW does not even use DX11 AFAIK. It uses the version of DirectX that the program to use. Everything I see your Dxdiag is that your sound card drivers are not signed by Microsoft.
What are the errors do you get? Have you tried updating your sound card drivers? You have run the WoW repair tool? I'll also try disabling your sound card, and then launch the game to see if the problem persists. I don't know a lot of people with this kind of sound card.
-
Original title: DirectX will not install.
I blew on it this time, and I completely uninstalled DirectX to attempt to clean install it. Now, it will not install. I get the error "an internal system error has occurred. Please refer to the DXError.log and DirectX.log. "I try to install it again.
I can't find these two newspapers anywhere, and I'm not 100% sure what to do.Hello TheAwesomeJoey,
Click on item below and follow the instructions to install DirectX.
Ko ID of Article: 179113 -how to download and install DirectXIf this does not help, then I suggest that run you a SFC scan to see if there are corrupted files.Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any violation of the integrity and repair any damaged operating system files.
Reboot your system.
Then try to reinstall DirectX.Please answer back with an update on if it solves your problem.Sincerely,Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Problems during the upgrade of DirectX
Original title: honestly confused.
Hello Microsoft
I am trying to upgrade my direct x and he said that he could not trust the .cab files. referred to your site and not saved and re-entered the .dll files and I still have the same error during the installation of DirectX. When I sign the files it says that some of the files were either missing or not in the right directory. I threw the Earth (initpki.dll) (gpkcsp.dll) (sccbase.dll) (slbcsp.dll). What I have to upload them to a certain place to download direct x? and if so please include a link to each file or a link to a file .zip them aontaining and also know how to solve the problemSincerelyBrendenHello
See if that helps you.
"How to fix and check the integrity of system files of Vista with the System File Checker"
http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html
"How to extract files from the Vista Installation DVD"
http://www.Vistax64.com/tutorials/261616-extract-files-Vista-installation-DVD.html
Alternatively, you can do a repair installation using a DVD of Microsoft Vista upgrade.
How to perform a repair for Vista Installation»
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
-
Blue screen after downloading DirectX
original title: Possible graphics problem
The story is: I came across the site to download DirectX programs. Once the download is complete, I guess that the downloaded file itself stuck on the original file, but I suddenly got the blue screen and my computer off. I'm not a stranger to it, but when I'm ready to understand the problem, my computer would not start. Of course, I see the screen saying that windows did not close properly and to recommend that I have run the Startup Repair tool. However, when I press on enter, the screen appears again. I chose "Start Windows normally" and the computer did a disk check. It restarted again, but on my computer, when loading Windows there is a small bar that crosses the screen several times. It is usually on about 15 to 20 seconds, but he remained for more than a minute, this time, then the cut screen (which is normal), and then it restarted abruptly again. I remembered that there is a way to do a system restore without having to connect, so I tried it, and the computer restarted again. I tried to run safe mode, but that no longer works. It just seems like anything where the mouse can run does not load. I don't know if it's a kind of graph question because I am trying to download DirectX, but it seems that he. Moreover, in the start menu, I chose "LAN start" and he said that it was a test of media or something, but then he says that the test failed and to check the cable. There was a code, but I forgot. Something with a P. I don't know what cable it means or if this could be a factor. Any help would be appreciated.
Hello
Everything you did corrupt the existing installation. Using the option boot LAN would do nothing for you, that is used to install windows from a network, not repairs.
Your best bet would be loaded from the recovery console or safe mode with system restore command prompt. If this fails, you might have to reinstall Windows to repair the file system damage. You will need a Vista installation disc to access the Recovery Console, from here, you can run rstrui.exe to start the system restore.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Installing DirectX, that an internal error has occurred...
PROBLEM:
I get the following error message "DirectX Setup: an internal error has occurred." Please refer to the DXError.log and DirectX.log in your Windows folder to determine the problem. "When you try to install ANY version (version 9 or later) of DirectX using the directx web installer or the full installer. Please click to see these two newspapers DXError.log and DirectX.log.
REASON:
Why I'm trying to install directX this is because I am playing a game, "Dead Island", which apparently requires DirectX 9 .0c for the sound working properly and is my DirectX 9 .0c is missing files or is damaged and must be repaired/reinstalled. Irrespective of Dead Island requires DirectX 9 .0c or not, but it's the fact that I can't get directx even install or repair itself without the above error.
SUMMARY:
It seems that it does not matter which version of DirectX, I try to install the result of late is the above error message. This means DirectX 11, 10 and 9 and tried the directx web installer, but also complete installers with the same result. I searched and searched this forum and google searched and found different jobs with the same problem with different fixes the majority, arguing that their antivirus was the cause. Current indicated by DXDIAG DirectX version is version 11.
I apologize if there are several posts like this, but I guess that these errors of DirectX are unique to each problem, so a new position must be made for each error even if the error message is obviously identical the DirectX error logs cannot be.
MEASURES HAVE BEEN TAKEN:
1. I've gone the route of software protection and uninstalled all traces of firewall antivirus/spyware and part 3 (which consisted of Avast and Threatfire) and the problem persists. Reinstalling the operating system is never my thing that I would like to know how to solve the problem now, in case this problem from happening again.
2. I tried restores system as soon as a few months and the problem persists.
3. I tried (SFC/scannow) System File Checker and found where it is said some of the problems have been resolved, and some could not be corrected. See log. (50 MB)
4 Ran scans using several antivirus software different such as Spybot, Malwarebyte s, Avast, Threatfire and the list goes... and no infections not found and to my knowledge I have never been infected.
5. tried "Microsoft difficulty it Center Beta" and there investigate and fix everything he could find, which wasn't much, and the problem persists.
6 SP1 is installed and all updates are currently being updated.
TECHNICAL DATA:
I'm on Windows 7 64 bit Ultimate edition.
CONCLUSION:
I would like to see this problem get fixed and am willing to try almost anything except the easy way and reinstall the OS so please don't not to do this. Currently, it is a minor problem but could be a major problem if a new version of DirectX is eventually released and would be unable to install it because of the problem obvious. I am looking for any advice, known solutions or useful facts regarding my problem.
I look forward to the answers. =)
Hello ComputerNerds
Below are a few threads on this issue. Some associated with other versions of the OS but the soultion threads are the same for Windows 7. If you have any questions please let me know. Thank you.
-
Setup of DirectX end-user Runtime Web will not install.
He said that there is an internal error whenever I try to install it. I have download right starting from Microsoft Download center. I need this for some programs to work on my computer. Please help ASAP!
Hello
1 did you change on your computer?
2 are. what program you referring?
3. What is the exact error message you received?
Method 1:
I suggest to perform the clean boot and try to install.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
End-user Runtime Web install DirectX
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=35
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to follow the link and check.
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651
Method 3:
I also suggest you to follow the link and check.
Diagnosing basic problems with DirectX
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX
Method 4:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
I tried to play of Garry's Mod on steam for the last 3 days, but whenever I try to run it, it tells me that I need to update DirectX and sends me to http://www.microsoft.com/en-gb/download/details.aspx?id=35. It gives me two error in the file-
[20/02/14 16:31:12] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine
Sections are not initialized.
--------------------
[20/02/14 16:31:12] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProcCDXWSetup::InitInstallEngine() failed.
For any help or suggestion would be appreciated!
* Edit: Had to correct the 'tone' to 'from' on the first sentence
Hello
Windows 7 comes with DirectX 11
Start > type CMD
Right click on CMD and select Run As Administrator
Type sfc/scannow
Press enter
Note: There is a space between sfc and / scannow
Use the System File Checker tool to repair missing or corrupted system files
http://support.Microsoft.com/kb/929833/en-us
When you are finished, perform the following steps to open the CBS log for the results of the analysis
· Click on Start Orb > type cmd in the search box
· Right click on cmd in the results above > click on run as administrator
· At the command prompt, type notepad c:\windows\logs\cbs\cbs.log then press enter
Then open the Device Manager
Double-click the graphics card and right click on the available device and select Update driver software.
Follow the steps prompted to complete the update of drivers.Diagnosing basic problems with Direct X
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7
-
First of all, I got a new game called (2 prototypes) the game was working fine then when I tried to run 2 days after installing... I got an error message saying XAudio2 is not found. Please re - install the game and install him required DirectX 9 provided .0c or get the latest version of Microsoft and the game works without noise... I re-install the game, but the same problem appearing Dungeon, which is why I tried to install the latest version of directx, but during the installation of directx, I got another error message saying (xAudio2_3.dll is not designed to run on Windows or it contains error) I tried to fix it by doing the registry repair , but it did not work so someone can tell me what is the problem and why it work well before then I got this error without changing anything!Here, any help would be helpful thnx in advance :)
Hello
Please contact the developer to check whether the game is compatible with Win 7 or not, since we have no information concerning its compatibility.
Windows 7 Compatibility Center
Try to install the game in compatibility mode and check. Give the link.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Check the version of DirectX to the computer referring to this article:
http://Windows.Microsoft.com/en-us/Windows7/which-version-of-DirectX-is-on-your-computer
Diagnosing basic problems with DirectX
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX
See the article on how to solve the problems of the game performance:
The problems of the game performance
http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
It may be useful
-
Can I do certain programs use directx 11 and some use directx 9?
Hey,.
I just my computer laptop repair back, and for that reason I can't play League of Legends due to the game not being not able to fnd direct3d.League of legends only uses directx 9 and I have directx 11 is installed is it possible to use directx9 League and other programs to use directx 11?Any help would be gratefulAaronHi Aaron,
I suggest you to return the items:
https://support.leagueoflegends.com/entries/20436003-DirectX-suggestions
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX
If the problem persists, contact the support of game for more help and information.
-
Cannot install DirectX on Windows 8?
When I install DirectX on Windows 8, the following message keeps appearing:
"A necessary .cab file for installation cannot be trusted. Please check the Cryptographic Services are enabled and the file is valid. »
I followed the instructions in this thread
But it still does not work. I typed the following command:
regsvr32 /u softpub.dll
regsvr32 /u wintrust.dll
regsvr32 /u initpki.dll
regsvr32 /u dssenh.dll
regsvr32 /u rsaenh.dll
regsvr32 /u gpkcsp.dll
regsvr32 /u sccbase.dll
regsvr32 /u slbcsp.dll
regsvr32 /u mssip32.dll
regsvr32 /u cryptdlg.dlland it seems that some loading modules.
These messages keep coming:
The module 'initpki.dll' failed to load.
Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.
The specified module could not be found.
The module "gpkcsp.dll" Could not load the.
Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.
The specified module could not be found.
The "sccbase.dll" failed to load module.
Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.
The specified module could not be found.
The "slbcsp.dll" failed to load module.
Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.
The specified module could not be found.
How can I make it work? I need to install these. DLL files? Please tell me how to fix them! D:
I even did a SFC scan, but it says:
"Windows resource protection found corrupt files but was unable to solve some of them."
Hello
Thank you for the update on the issue.
Yes, you are right that if SFC scan find damaged files but could not repair so that there could be a chance that some system files are corrupt. So, I suggest you run the DISM commands and then see if it helps you to fix the corruption.
Maintenance of the images of deployment and management (DISM) installs, uninstalls, configures, and updates features and CBS packages in Standard Windows 8 Embedded images (standard 8) offline and offline Windows Preinstallation Environment (Windows PE) 4.0 images. The commands and options that are available for servicing an image depending on whether the image is offline or online. All controls operate on a standard 8 offline image. Subsets of commands are available for the maintenance of an operating system.
I suggest you run the commands in elevated command prompt and control below if this can help.
- Press Windows key and X at the same time.
- Choose line (Admin) command on the shortcut menu.
- In the command prompt, type the following command and press ENTER:
DISM / Online/Cleanup-Image /ScanHealth.
This command is used to check if an image is repairable. Scan the image to check corruption. This operation may take several minutes.
DISM / Online/Cleanup-Image /RestoreHealth
This command is used to repair an image.
Keep us updated on the issue after running DISM commands.
-
Original title: Directx problems
I have a computer of Windows 8 and im trying to run a game on steam. Whenever I do it says that I need a Directx says update when I try to install it. AN internal system error has occurred please see DXError.log and DirectX.log in your windows folder to determine the problem. I watched up I don't have much sense of him here, it is
--------------------
[11/10/14 09:20:27] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngineSections are not initialized.
--------------------
[11/10/14 09:20:27] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProcCDXWSetup::InitInstallEngine() failed.
--------------------
[11/10/14 09:22:25] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngineSections are not initialized.
--------------------
[11/10/14 09:22:25] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProcCDXWSetup::InitInstallEngine() failed.
--------------------
[11/10/14 09:41:52] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngineSections are not initialized.
--------------------
[11/10/14 09:41:52] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProcCDXWSetup::InitInstallEngine() failed.
--------------------
[11/10/14 09:49:16] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngineSections are not initialized.
--------------------
[11/10/14 09:49:16] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProcCDXWSetup::InitInstallEngine() failed.
--------------------
[11/10/14 10:04:23] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngineSections are not initialized.
--------------------
[11/10/14 10:04:23] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProcCDXWSetup::InitInstallEngine() failed.
--------------------
[28-10-14 19:04:26] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngineSections are not initialized.
--------------------
[28-10-14 19:04:26] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProcCDXWSetup::InitInstallEngine() failed.
--------------------
[28-10-14 19:59:23] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngineSections are not initialized.
--------------------
[28-10-14 19:59:23] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProcCDXWSetup::InitInstallEngine() failed.
Thank you
Hello Peta,
Thanks for posting your question on the Microsoft Community forum.
According to the description, I understand that you are not able to install DirectX and get error message: internal system error has occurred please see DXError.log and DirectX.log in your windows folder to determine the problem
In order to understand the issue more clearly, I would ask that kindly provide me with the following information.
You did changes to the computer before this problem?
Since how long you are having this problem?
The game you are trying to launch in the system?
I suggest you follow the methods and check if it solves the problem.
Method 1:
Click on item below and follow the instructions to install DirectX.
How to install the latest version of DirectX
https://support.Microsoft.com/kb/179113?WA=wsignin1.0
If the problem persists, please follow method 2
Method 2:
How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.
https://support.Microsoft.com/kb/929833?WA=wsignin1.0
Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.
You can also check out the link below.
Diagnosing basic problems with DirectX
http://Windows.Microsoft.com/en-us/Windows-8/diagnosing-basic-problems-with-DirectX
Please answer back with an update on if it solves your problem.
Thank you.
-
repair iphone warranty in Cambodia
How can I get my iphone repaired when you live in Cambodia? iPhone 6 s, bought the Birmingham UK Airport, August 16, 2016, screen went black 3 weeks ago, does not work, no phone number to ring to Cambodia I can do? John Wharmby p/n + 883754699.
You must take the device to a EU country. Phones purchased in the United Kingdom, cannot be repaired than in the United Kingdom or another country of the EU. For purposes of the warranty, the warranty is valid in the country of purchase, but the EU is considered to be a country. You cannot ship to Apple, they will refuse international shipments.
-
After the update of Sierra once the photos has been repaired all of my albums have been removed from my album of videos from photo library and all, only defalt albums that are there are people, last imported and my photo stream.
If the videos, Burst, Slow Mo, time, selfies are all gone?
Please help someone
Videos are, Burst, Slow Mo, time, selfies albums in the missing sidebar or the content of these missing albums?
You have a copy backup of the library made just before your Sierra improvement?
Maybe you are looking for
-
Tecra M9 - audio drivers for Windows Server 2003
Hello Even though I know that the m9 does not officially support Server2003, I loaded and it works fine. However, I am looking for audio drivers that I could use. Any suggestions?
-
X 240 does not start after upgrading to the latest version of the bios
I bought windows 8.1 factory machine. Then I had the local store install 8.1 on larger ssd. I did just last update of the bios, and now the machine does not start. I'm sure it is bound uefi, but I'm not knowledgeable in this area. The start setting m
-
How to recover messages deleted from the hotmail Inbox
I deleted all e-mail messages by the mistakes of my Inbox on the 06July 2011. Is it possible to recover?
-
I can't connect to the computer by using the password.
Original title: windows 7 locked out after several incorrect attempts I can't connect to my computer toshiba satellite laptop after that my friend unsucessfully tried to guess my password. Now my password is not recognized and I couldn't connect to m
-
Hello! -My computer AllinOne is broken and I want to install my Creative Suite 6 - Design Standard on my new computer. Thanks for the help... Jaqueline