Repair / replacement of related files by using "Apply to all"

Similar Questions

• Always replace the output file for serial port.

  Hello, I use Workstation 7 on Linux and use the option "Output to a file" serial port for the logging of messages to the client for debugging.

  It works perfectly, however, if the file exists already workstation asking what to do (crush, add, etc.). It works, but I would like to have the option to auto restart, restore, instant, etc. and this message gets in the way.

  Is he a .vmx parameter I can apply to my computer always replace the output file without asking?

  Yep - found

  you need these two lines:

  msg.autoAnswer = 'TRUE '.

  Msg. Serial.file.Open = 'Add '.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• Player fails to link to the HTML file with the relative file specification.

  I use a PC running Win XP and Adobe Reader 9.3.4

  Adobe Reader says that it cannot find a file even if it gives the correct path and spec in the error message?

  In LaTeX, I use the hyperref package to produce a pdf document called pratiques.pdf

  \usepackage[pdftex]{hyperref}

  
  This works...

  
  CASE 1) my pratiques.pdf contains the following statement.

  
  \mbox{\href{run:./answers.html}{\Huge\textcolor{magenta}{$\bigstar$}}}solutions

  
  The agreement of file and directory is...

  /foobar/questions.PDF
  /foobar/answers.html

  The user clicks on pratiques.pdf, then within this pdf document when the user clicks on the magenta Star (link), answers.html starts in the browser. Perfect!

  
  It does not work...

  
  CASE 2) my pratiques.pdf contains the following statement. This time answers.html is located in a subdirectory from questions.html

  \mbox{\href{run:./exercise1/answers.html}{\Huge\textcolor{magenta}{$\bigstar$}}}solutions

  
  The agreement of file and directory is...

  /foobar/questions.PDF
  /foobar/exercise1/answers.html

  
  The user clicks on pratiques.pdf, then in this pdf document, when the user clicks on the magenta Star (link), answers.html cannot be found.

  Frustrating is that Adobe Reader allows the specification of OK in the error message file when he says that it cannot find the file! ??

  I tried enclosing the specification of file within various quotes etc, but I just can't get this relative file specification to find the HTML file. I wish it works so I can apply a structure for the structures of files for this work.

  Any help much appreciated.

  Kind regards
  Brad

  Reader 9.3.4 cannot open files in sub directories (and all other directories), but if you move the files to the same directory where the pdf file is, they can be opened. Other people in the forums has encountered the same problem)

  ( http://forums.adobe.com/thread/714892?tstart=0). I guess everyone will meet the problem when they click links in a pdf document that point to files in other directories. 9.3.3 seems do not have the problem.

• Replace an old file with another update

  I'm new to legacy, but I think I saw how to do this somewhere...  After importation and use of an illustrator in an animation file, I needed some items display in the file. Is there a way to import this updated file and replace the old file.

  When you replace the old file with the new only the new file keep all animations and effects applied to the previous file?

  Or this option does not even exist?

  Also does make a difference if you have imported the file as a composition vs images?

  
  Thank you.

  There are several ways to do this:

  1. Close AE, edit your .ai file without adding all the new layers and then reopen AE
  2. Select the .ai file in the project Panel, and then choose Edit Original in the menu
  3. Edit your file .ai with AE remains open, then select the file in the Panel of the program to the layer that you have changed and right-click and choose reload file
  4. Finally, do a completely new .ai file import as a model, then replace the layers in your comp by pressing the alt/option key and do drag the layer previously selected in the timeline panel.

  If you need more do let me know.  I'll try and answer the computer instead of my iPhone.

• Replace the baggage files and maintain links

  Hello-

  I need to replace a file of baggage in my current RH7, with a new version of doc project. How to maintain links to the document so that I don't have to change the properties of binding in each project file? Or if not possible, how to identify which documents are currently related to this baggage file so I can edit hyperlinks? Thank you!

  Hello

  For my money, I think that a more secure approach would be to always use the same file name for the file of baggage. Just make the difference in the level of the source.

  For example, call the RedRabbit baggage file if you want, but on your hard drive (or anywhere where you store the file), you have RedRabbit Version One. Simply copy and rename so that you can easily replace the baggage file. In this way, you don't have to play muddy muck with Binder and search and replace and all that rot.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Error when saving the file cannot click to replace an old file

  I have a ploblem when I save my file, when you use older versions of mac os (max os x) when I save file and you want to replace the old file I just click in the file I want to replace and save, but when I update to macOS Sierra I can't do when I click on file it does not change the name and I have to type.

  

  This is for me a great void in the Sierra of Macos, it drives me crazy

• Text editor ' Save as... '. "broken - replaces the original file as well

  ' Save as... '. "removed some sort items of menu standards a long time ago, but I used this http://osxdaily.com/2012/08/27/enable-save-as-os-x-mountain-lion/ to restore a just as long. This addition of shortcut recently stopped working properly. Creates the new file, it also replaces the original file. Good OOP...

  I removed the keyboard shortcut and discovered that if I open the file menu, hold the Option key to activate twice in save Sub... than that STILL not work correctly. It seems something within the modified OS and buggered how to save under... anything works.

  Does anyone know how to save under... work again? Please do not respond if your answer is to use two copies. This isn't an answer as duplicate is a replacement of several wrong step of the simple and easy as... backup function.

  OS X El Capitan: save documents

• Windows media player in the browser asking to replace the html file each time

  Hi Alll,

  I have a case in which I run a WMP in a browser using ActiveX container, the problem I am facing is on each race its asking me to replace the existing html code in the file in the folder, is there a way to get rid of it, I dnt want to click on replace every time. Y at - it an easy way to do it.

  Please let me know.

  Ankit

  Thanks, this was very helpful

  smercurio_fc wrote:

  The dialog box is caused by the characters to write VI file you are using. If the file already exists, you will be asked if you want to replace it. Instead of using these screws, simply use text file read and write functions of text files that are in the range of the file IO.

  Your code has another question: your use of the constant current path of VI. See why my executable does not work when you use the constant path of the current VI?

  smercurio_fc wrote:

  The dialog box is caused by the characters to write VI file you are using. If the file already exists, you will be asked if you want to replace it. Instead of using these screws, simply use text file read and write functions of text files that are in the range of the file IO.

  Your code has another question: your use of the constant current path of VI. See why my executable does not work when you use the constant path of the current VI?

• I need a "windows XP Professional service pack 3 cd" to replace a DLL file? where can I get this?

  I need a "windows XP Professional service pack 3 cd" to replace a DLL file? where can I get this? He came not to this pc purchase.

  Of

  http://www.bleepingcomputer.com/tutorials/how-to-see-hidden-files-in-Windows/

  Windows XP and Windows 2003

  To enable the display of Hidden files follow these steps:

  1. Close all programs so that you're at your desk.
  2. Double-click the icon for my computer.
  3. Select the Tools menu, and then click Folder Options.
  4. When the new window appears, select the view tab.
  5. Put a tick in the box display the contents of system folders.
  6. Under the section files and folders hidden , select the radio button Show hidden folders and files.
  7. Remove the check mark from the Hide extensions of known file typescheck box.
  8. Remove the check mark from the box that Hide protected operating system files.
  9. Press the apply button and then the OK button and shutdown my computer.
  10. Now your computer is configured to show all hidden files.

  Now, go to this site:

  C:\Windows\System32\dllcache

  See the missing file by accident? If so, it can probably be safely copied to this location:

  C:\Windows\System32

  Oh, and what's the name of this file? And what is the make, model and model number of your PC?

• Is there a way to recover the deleted files without using any software?

  Is there a way to recover the deleted files without using any software?

  Is there a way to recover the deleted files without using any software?

  # Software is necessary.

  First check the recylcl tray. If she isn't here, read the following:

  "Deleting" a file does not delete actually it brand just space be used. There are third-party programs that can sometimes recover deleted files. The problem is that the space used by the file is likely to be replaced very quickly, and this makes the unrecoverable file.

  So your chances of successfully recover this file are decent, if you try it again immediately after deleting it and quickly down. If you have used the computer since then (for example to read this answer and write that question), your chances may be very weak now.

  But if the file is large enough, it's still worth a try. Stop using the computer in question immediately, if you haven't done so already. Download an undelete program (in here is one: http://www3.telus.net/mikebike/RESTORATION.html but there are many other choice; do a search) on a friend's computer and bring it to you on a diskette, CD, or drive to the thumb.

  If that fails, your only recourse is to bring or send the drive to a professional file recovery company. This kind of service is very expensive and may or may not work in your case.

• How can I recover deleted files without using any software?

  How can I recover deleted no matter what folder, image, Word & excel files without using any software inculd Recycle Bin?

  Monday, June 11, 2012 11:03:01 + 0000, dipakparate wrote:

  How can I recover deleted no matter what folder, image, Word & excel files without using any software inculd Recycle Bin?

  You cannot retrieve files deleted with the help of software. And even using
  software, you may or may not be able to recover.

  What you have against the use of software? The first thing to try is to
  being trash. If she isn't here, read on.

  "Deleting" a file does not actually delete it marks just the space
  also available to be used. There are third-party programs that can
  sometimes recover deleted files. The problem is that the space used by
  the file is likely to be replaced very quickly, and it makes
  the unrecoverable file.

  So your chances of successfully recover this file are decent if you
  Try it again immediately after the deletion of it and go quickly
  downhill from there. If you have used the computer since then (for
  example to write this question and read this answer), your chances may
  be very poor now.

  But if the file is large enough, it's still worth a try. Stop
  using the computer in question immediately, if you have not done
  already. Download an undelete program (and here's one:)
  http://www3.TELUS.NET/mikebike/restoration.html but there are several
  others to choose from; Do a search) on a friend's computer (do not
  it on yours because that would overwrite the files you want
  Undelete) and bring it to you on a CD or thumb drive to try.

  If that fails, your only recourse is to bring or send the disc
  a company of professional file recovery. This kind of service is very
  expensive and may or may not work in your case.

  Ken Blake, Microsoft MVP

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• Cannot modify READ ONLY file attributes using the administrator account

  I tried the windows Explorer and a custom program called Directory Opus. I tried to create several administrator accounts, but not luck.

  I can't work with this existing problem.

  I need a solution.

  I have exactly the same problem.  Following the steps above did not work, folders/subfolders unchangeable rest.  I am the owner of the folder and subfolders.  I don't know yet how they became Read-Only to start.  Read-only on the individual files setting works correctly.  Changing the settings of file does not work.

  IMPORTANT EDIT:

  According to a message from the Microsoft Knowledge Base:
  You cannot view or change the read-only or system attributes
  To summarize, Windows does not include system or read-only folders settings (he was aware of these properties on the FILES however).  Individual applications that you use cannot ignore the State of read-only on a folder and can give an error.  In my situation, an application was trying to create a new file in a folder that has been marked read-only and honored the RO parameter and refuses to try to create the new file.

  To actually change these attributes, properties menu will not work.  The KB source:

  • If you click apply changes to this folder only , the read-only attribute is changed for all files in the folder. However, the read-only attribute is not changed for the folder, its subfolders or files in its subfolders. If you click apply changes to this folder, subfolders and files , the read-only attribute is changed for all files in the folder and all files in the subfolders. However, the read-only attribute is not changed for the folder or its subfolders.

  To change these properties, the user must start a Terminal command line and execute the changes by hand, for example, this command:

  • attrib - r + s c:\test

  .. What will remove the READ ONLY parameter and apply the SYSTEM setting in the folder.  Once more, change the properties of files (including files in subfolders) works as expected with the right click - Properties-> Security menu.

  The basic source of knowledge:

  http://support.Microsoft.com/kb/326549

  Bad support, Ms.

• message: 0X80071A90 of the file in use by another program. When I try to back up to an external drive

  I get an error message saying that the 0X80071A90 file is used by another program when trying to make a backup using windows backup installation, anyone got any idea how to get around this please.

  Hello Chris,

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions, by making a backup of Windows. In the meantime, please try to follow the following suggestions to solve the problem.

  You can try putting your computer clean boot state, and then try to perform a backup and see if that helps. Follow the link below to get you computer in a clean boot state, because your system in a clean boot state allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .

  If that doesn't help then try to find the bad sectors on the hard disk and then perform a backup, see if that helps. Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right click on cmd and click run as administrator

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to save and check the result.

  Visit this link for more information on "check a drive for errors":

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Security How can I remove the copy and paste the files I used?

  Security How can I remove the copy and paste the files I used?

  I can't get rid of all the e-mail addresses I have copied and pasted.  No matter what I will always appear if I hit paste again.  This is a shared computer and I would rather not have my copy and paste the files stored on the computer, after that I quit.

  Thank you

  Hi Ron,

  You can copy or move information (for example, text and pictures) between files and programs using temporary storage called the Clipboard. The Clipboard is not visible, so even if you use it to copy and paste information, you never actually see the Clipboard when you do this.

  The Clipboard contains a block of information at a time. Whenever you copy information to the Clipboard, the old contents of the Clipboard is replaced by the new information.

  When you shut down the computer everything is stuck in the memory of the Clipboard is cleared.

  Please click the below mentioned link to get an overview of the clip board memory.

  http://Windows.Microsoft.com/en-in/Windows7/copy-information-between-files

  Answer please if you have any questions.