Repair system on USB disk

Similar Questions

• Disk error non system at boot when using the external USB disk

  Hello

  I use Windows 7 Pro.  I have a Seagate external USB disk causing a "Non-system disk error" at startup.
  I had the same problem with a Clickfree drive.
  The problem occurs on my other PC with different versions of Windows.
  How can I get my computer to start and not give me this error message for my backup drive?
  At startup (when the drive disconnected), I get a screen of BACK indicating "Client Mac Addr."... GUID..., DHCP. "I think it's looking for a disk boot from.
  I just need to boot from the internal hard drive.
  Thank you
  AS

  USB external references aren't desingned to be connected on startup, you must also use the safely remove the procedure and disconnect the USB key before closing.

  If you get such a screen "Client Mac Addr... etc" at the start (with usb unplugged), looks like you are using a very old motherboard. If the system starts only with connected usb, then your initial installation of victory is defective or damaged

• Transfer of recovery system of USB drive to DVD disk

  I have read the forums and I see that you can transfer DVD USB recovery but can you make the USB on a DVD. Is this possible? I'm a computer tech and not an average user, so I can understand if it's complicated.

  I was in the hospital when I did the recovery on USB disk and was not thinking. He saved me trying to repartition my hard drive and inadvertently deleted my recovery partition. I didn't have access to blank DVD media at the time and when I got home, I wanted to have a copy on DVD for the Image. I am currently using a 32 GB SanDisk USB flash drive and won't eat up to 12 GB of space for recovery.

  I'm more concerned it's complicated to do because I am an advanced user. If you can help me, I would appreciate it.

  P.S. I love all your products. I only use HP printers and laptops and I am in love with this computer for HP Pavilion series laptop g my sister is for me off of eBay. You guys rock!

  Or you can call HP to order a set of recovery disks. Usually around $17. 800-474-6836.

  You can usually order via a link on your models also support page. It will be in the list of drivers/software.

• My laptop says "system on the disk volume is damaged," How can I secure my data?

  I have a Dell Inspiron 1720, which I had for about 5 years now. Recently he lights up and after trying to do the Startup Repair, I found that the system on the Disk Volume is damaged. I can't do anything on the command line because he said my laptop needs to restart whenever I get something. Is there a simple way, I save all of the data on the laptop?

  Hello

  You can remove the hard > put in a USB hard drive case > plug it into another computer > attempt to read data from there.

  Or, you can make a disk bootable operating system "Knoppix".

  It is a single block of working operating system on a disk that uses your machine hardware failures (as long as the damage that you have are NOT appeared to the Dell hardware; hardware must always work)

  http://Knoppix.NET/

  See you soon.

• Won't start not satellite M300 - system on the disk volume is damaged

  OK on the 1st...
  Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...
  and the drive light lit upwards or blink.

  After that I tried the several times, it starts.
  When I went into windows, IE opened, it hangs again.
  After a while a black screen with a mouse crusor only...

  I tried to turn it back on it... it comes out the window repair.
  after repair, he says that:
  "the system on the disk volume is damaged."
  'system QuickIN' file is repair.
  but always after some time, the problem came again...

  So I wonder what problem is that and what can I do to solve this problem?
  Is a software or hardware problem?

  Hello

  For me, this looks a bit like a HARD drive problem.
  I guess that HARD drive developed and the hardware error.

  Have you checked if the HARD drive is listed and recognized in the BIOS?
  Do this!

  If the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and must be replaced.

  Even if the HARD drive would be listed in the BIOS, you test another new HARD drive to check if the problem is not related to the failure of HARD drive.

• After the repair system now get Validation error

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: blocked VLK
  Validation code: 3
  Code of Validation caching: n/a
  Windows product key: *-* - 3R89F - D2KXW-VPK3J
  Windows product key hash: Ro / Y7HENE9CfW7lW + QtlNbYQEE8 =
  Windows product ID: 76487-640-8365391-23209
  Windows product ID type: 1
  Windows license type: Volume
  The Windows OS version: 5.1.2600.2.00010100.2.0.pro
  ID: {E1E586D7-D985-40D5-B72B-B417194240BE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation Diagnostic: 025D1FF3-230-1
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Caching the result: 3
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1

  Data browser-->
  Proxy settings:
  User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E1E586D7-D985-40D5-B72B-B417194240BE}1.9.0027.05.1.2600.2.00010100.2.0.prox 32*-*-*-*-VPK3JS-1-5-21-839522115-299502267-214717958776487-640-8365391-232091MICRO-STAR INTERNATIONAL CO., LTDMS-7313American Megatrends Inc.. V1.0 20080218000000.000000 + 000CC76347F0184E0780c 090409AUS Eastern Standard Time(GMT+10:00)03109    

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 13B7D: TRUE C & C INC
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  * original title - had repaired system and get validation error have an oem disk how cai I enter the appropriate key (repairman has closed the store) *.

  Hello

  It seems that the license Volume (VLK) key has been blocked. I suggest you to check the links below.

  http://social.Microsoft.com/forums/en/genuinewindowsxp/thread/cbb60c8c-0c83-4601-90b3-19a1c24cd6f6

  http://social.Microsoft.com/forums/en-us/genuineoffice/thread/6d13cbed-0e23-489F-a0f8-e4fef52659a9

  Apart from that, I suggest you to report your query in the TechNet forums to get help. Click on the link below.

  http://social.Microsoft.com/forums/en/genuinewindowsxp/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB disk appears on disk management, but not on 'my computer '.

  Hello

  I have a WD Passport Drive 500GB 2.5 USB external ".

  I have it plugged into the PC (Windows XP Home SP3), material has been recognized and installed correctly, but no additional disk appears on "My Computer".

  I entered "Disk management", the disc appears with the name, but without drive letter, I attributed to "G:" to it.

  Disk management I can right click above and "Open" the disc to see the content, but still it does not appear under "My Computer".

  BTW, another USB Disk-On-Key they receive a drive letter and appears on "My Computer" as it should.

  Best regards

  AVI Glam

  Hi AviGlam,

  Try the methods below:

  Method 1:

  1. Uninstall USB drivers

  a. Click Start and then click Run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. right click on USB and then click on uninstall to remove it.

  2 analyze the change of material and let Windows automatically re - install driver for your device.

  To check the hardware changes, follow these steps:

  a. Click Start and then click Run.

  b. in Device Manager, click on your computer so that it appears highlighted.

  c. click Action and then click Scan for hardware changes.

  d. check the USB device to see if it works.

  3. find if your device is recorded and assigned a letter.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  a. click on start

  b. Select run, in the Run dialog box type regedit

  c. open the registry editor, navigate to the following item:

  HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices

  Method 2:

  If method 1 does not then you can follow the steps below:

  Access the external hard drive via a command prompt, copy the data, and then format the hard drive.

  a. Click Start, type: cmd in the search bar.

  b. right click on cmd, and then click Run as administrator.

  c. type the following command:

  Copy [source] [destination]

  Note:

  Source: Specifies the location from which you want to copy a file or set of files. Source can consist of a drive letter and colon, a folder name, a file name, or a combination of these.

  Destination: required. Specifies the location to which you want to copy a file or set of files. Destination can consist of a drive letter and colon, a folder name, a file name, or a combination of these.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost/Missing/Deleted - file "c:\Windows\repair\system.

  Laptop: gateway MX3225 / XP Home Edition / 1 GB Ram / fully updated to SP3 / M 1.5 G CPU

  Had a virus and removed TI rebooted for system, black screen of death, managed to install Recovery Console, use step 1 by recovering a corrupted registry, ended up with missing or corrupt 'system32\config\system file', and looked in the repair directory there is no file in my "c:\windows\repair" folder that says 'system '. I have no way to use a cd drive or a USB on the laptop. Do I have to redo a file 'repair\system' from scratch, or is it on the hard drive in another directory? I read each article of Microsoft on the corrupted file / lack of issue, but there is no explanation for the repair file to miss.

  Again miss me the real "system" file in the directory "c:\windows\repair".

  I would write my own file system for this last reference if I do another repair of system like this, it would save a lot of my time.

  Any help will be appreciated

  Hey

  You should see if you never save your date, u did I guess.

  In any case, type the following lines of information in the order for Recovery Console screen and press (Enter) after each line:

  MD tmp

  1-copy c:\windows\system32\config\system c:\windows\tmp\system.bak

  2-delete c:\windows\system32\config\system

  3 - copy c:\windows\repair\system c:\windows\system32\config\system

  Let me know how it when.

  Life is easy, live and die what else?.

• Keyboard does not not in repair system screens or install Windows

  Hi, I have had fairly recently built myself a new pc and bought a copy of Windows 7 on the offer of the student they were running. I got all this and running for ages now, installed games, played against them, it is fully functional.

  Recently I wanted to install the software for my tv TNT acquisition card and knew exactly what model it was, as it was on the bottom pci on the motherboard slot, I had to take it apart to look at the sticker on the underside. I put the power off, came out the card checked, put to the back of the card to and attempt to start back up.

  Nothing will do, he gives up and restarts on the blobs little swirling new fantasies of the title of color screen. So I launched in repair system, as recommended by the computer.

  Here's the issue, it appears with a recovery system, with a drop-down list Options dialog not input method keyboard, which I can't access, because the mouse and keyboard don't work, they work very well up to this point, but once here, he's just ignoring me.

  Now, I tried this with the connection USB or PS/2 keyboard, no difference. Same story if I try to boot from my drive of W7, comes to a different language options page, and I can't do anything.

  Any ideas? Council of State, I am quite puzzled. Help, please.

  Matt

  Very old topic, but met the same behavior recently.  I was preparing to decide the mobo was made, but I remembered that my devices have been connected on the usb 3.0 ports.  Win 7 repair does not appear like this (on my PC anyway).  Put the two USB 2.0 ports, all very well once again

• "Found root system on the disk volume is damaged."

  Hi, have a Dell laptop Inspiron 1720 under Vista. Suddenly the screen turned blue, my wife tells me, and she tried to restart. A message passed very quickly, and she was unable to read. When I tried to restart the screen has come to give the option to start in safe mode, guest, with the network and other options, including to start normally. I tried each of the options, and none worked so I am unabe to run chkdisk or system restore because I can not get the prompt. I used my boot drive and ran the repair, not good ran, it ran and said the system should restart, he did, but windows could not load.

  I ran a few other test with the F2 and F12 keys-drive unit as much as I've been able to say all items being passed. I took the vista disc and tried to do a clean installation, the computer wouldn't complete installation, it just hangs on the system configuration. After running another one of the diagnosis he was one of the tests that gave information

  " Root cause found" "" system on the disk volume is damaged".

  What is this and can I replace the hard drive for this problem?

  Thank you

  Hi Michel S

  Changed the BIOS to ATA and was able to download Vista and put in place. When I set the BIOS to SATA boot computer a blue screen that passes if fast, cant read then stops start towards choosing a nail system, to the system recovery of windows screen then the screen of windows recovery and repeated the same thing each time.

• Windows 8 How to recover without a recovery USB disk or a disc?

  Hello, about a month ago, I rebooted my computer in windows 8, caused by viruses, and I did it without creating a recovery on a USB drive. Also, I bought the computer from best buy so I have not received a disc of 8 recovery of 64-bit Windows is restarted. Trying to repair and restart, the computer turns on, but head to the blue menu screen and tells me that I am missing the drivers. Is it possible that I can download a recovery on a different computer from windows disk 8 and use it to mine? If this does not work, is there a way to download a recovery on the windows site drive? Thanks I hope you can answer my questions.

  Most computers come with an internal partition on them with the recovery information.  This allows you to go back to "factory fresh" conditions, as a new installation.

  How to go to you it's different on different computers.  My Sony Vaio all-in-one PC that I got from BestBuy last year with Windows 8, has a small pin hole I have to press with a paper clip to enter recovery mode.

  If this does not work (or your computer does not have this option), you will need a recovery disk.  The recovery discs are unique to the computer, so you should get from the manufacturer.

  I helped a friend a few weeks ago and Dell sent him a DVD disc of free recovery, the next day Fed - ex.  But my Sony Vaio here, (which just returned after the internal hard drive field itself of pasta), Sony wanted me to pay 60 million dollars for a CD. I can't use anyway because this computer has no CD drive (then they were told to go buy a lol... but that's another story).

  My recommendation or you is so ask the manufacturer or get with BestBuy.  In my case, because the computer has been less than a year when this Vaio hard drive died, BestBuy geek squad made replacement under warranty on it for me, free.  I had no recovery either by car (although it would not have helped because the internal hard disk was physically dead).

  When I came back today, do you think better :), I created a recovery USB disk

• Dynabook SS 1700MY - ' alert: System protection USB key set failure.

  Toshiba dynabook SS 1700MY displays "alert: System protection USB key set failure.

  So here's the story:
  I accidentally tickled my friend that is using his laptop and he spilled his Coke into the laptop.
  I told her to turn it off, and then he wiped his spill in the keyboard.

  Then, when he tried to open it. He opened Fortunately, but it says:
  Alert: System protection failure.
  Set the USB key:

  Me and my friend do not know what it is. Just reply to us if you know what is this 'USB key '.

  We do not know what it is, so please tell us if you know what is the USB

  Dynabook SS 1700MY is not known to me... I guess this isn't a European model for Toshiba laptop...

  The error message looks like a BIOS password. It seems that the security of the system has been compromised.

  Unknown BIOS password can be removed from the laptop user but can be removed by the Toshiba authorised service provider available in your area.
  So you will need to return the unit to an ASP for a password reset.

• What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?

  What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?

  Disconnect, and then try to connect again. Use a different cable.

• NO REPAIR ON FSX INSTALLATION DISK OPTION

  Hello im trying to fix fsx but there is no option of repair on the Setup disk 1. I have windows 7 and delux fsx. I would like to be able to fix my game, but there is no repair function while I would appreciate it if someone could help me.

  Sorry, you are wrong! The problem is caused by the presence of some files missing from the following folder: C:\Program Files (x 86) \Microsoft Games\Microsoft Flight Simulator X\Effects\texture

• System Restore Startup disk

  Hello: I have a registry problem complicated that I can't get an answer to, and I would like to create a System Restore Startup disk. How can I do this? I am running windows xp (I think that sp3) on a lenovo thinkpad t61.

  I can't open the *.exe files and think it's a registry problem. I tried several ways to solve this problem and have not been able to do.

  I'm running a lenovo thinkpad t61.

  I am referring to the recovery disc.

  You don't say what you tried, but EXE File Association Doug Knox fix usually does the trick: http://www.dougknox.com/xp/file_assoc.htm

  It would be interesting to analyze both of these free applications:
  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  It would be wise to say away from generic 'system restore boot floppies', unless you are sure of what you are doing.  The Thinkpad T61 should have associated with the application of "Rescue and recovery" of Lenovo in a hidden hard drive partition.  See the Thinkpad T61 Service and troubleshooting guide, Chapter 4: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67885.

  Rather than provide a disk recovery or a Windows disc with your computer, Lenovo provides simpler methods to accomplish the tasks usually associated with these discs. The files and programs for these alternative methods are on your hard drive, which avoids having to find a misplaced drive and problems related to the use of an incorrect version of the disc.

  The full backup of all files and programs that Lenovo preinstalled on your computer is located in a hidden protected area, or a partition of the hard drive. Although that hidden in the partition backups consume space hard disk. Therefore, during the audit of the capacity of the hard drive under Windows, you might note that the full capacity of the drive seems to be smaller than expected. This discrepancy is explained by the content of the hidden partition.