Replace one for the other < div >

Similar Questions

• After replacing one cartridge, the other who was half full got exhausted.

  Hello

  Once I replaced a magenta cartridge impoverished, the yellow cartridge which was full of 25% was supported by my printer to run out. After replacing a yellow, blue those amounting to 75% suffered the same discrimination. Now if this is the way for HP to make me buy more cartridges, then I'm sorry to know that they have opted for the mentality of microsoft to force consumers to buy more expensive stuff indirectly.  What do you suggest to me that I should do?

  Thank you.

  Thanks for the reply

  I would recommend that you remove all the cartridges, close the access door, unplug the printer and follow the steps in this a 'cartridge problem', "Ink cartridge failed" or not "compatible ink cartridges" Error Message on the printer paper to clean the contacts of the cartridge as well as the printer. Once done, plug the printer in and wait for the printer to say the cartridges are all missing or damaged.

  I suggest that insert you one at a time and close the access door after you enter each of them to ensure that they are properly recognized. If all goes well, that should help with any of the false readings on the printer.

  Let me know if that helps!

• Download Master cs5 because I lost my drive for the other items that I need to download a different one or is the part of the cs5 Master down lode

  Download Master cs5 because I lost my drive for the other items that I need to download a different one or is the part of the cs5 Master down lode

  I have 3 serial number, but do not know if the low vein is for all 3 or if there is another download, I need, (do not know if I need them iver tbh)

  Adobe Creative Suite Master Collection

  Adobe Acrobat Pro

  Adobe Creative Suite Production Premium

  
  

  Thanks for any help

  Dave
  

  If you have a suite serial number, download the master suite collection.

• for each page, I'm going to (including this one) something keeps vomit "Secure connection failed" notice, like 50, one after the other - how to make them stop?

  When I open a web page, and sometimes between the two, something launches a 'warning' that the "secure connection failed". I've added nothing to Firefox, but I stopped most of the security plug-ins or extension nothing helps. It wouldn't be too bad if it happened a page once or twice but I'm talking 10,15,20 one after the other.

  Try this solution:

  https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

• I'm trying to put a Transition chained between two elements placed one above the other.  I tried and I failed.

  I'm trying to put a Transition chained between two elements placed one above the other. To the left of the line that she plays in the lower clip and after the line, he played in the clip above.  Is that it can be done when the two clips are on the other? I tried and I failed. Help please.

  Also how do you call this long line like?

  Thank you.

  simply put your 'top' clip where it belongs - in the scenario

  Select the clip, Option - command - down

  the secondary has no replacement for 'tracks '...

• Can the Sandisk Sansa Fuze 4 GB MP3 read podcasts one after the other

  For health reasons, I need to take a long walk after each meal.  For many years during my walks that I listened to podcasts on my wonderful old Sandisk sansa, who plays a podcast after the other without action from me until I have stop.  It's perfect here in the North when I walk in 30 below zero weather. I mean that I don't want to open my parka and out the player to move to the next podcast.  If I had to do, they would find me lying in the snow, Frost, like all the rest of those poor Devils who bought the wrong MP3 player.  Anyway, after years of using the plug-in on my old Sansa fuze is pretty much exhausted and the player must be replaced.  I buy a sansa clip, but had to return when I discovered that he has not played podcasts one after the other, automatically. (And it's also too small for my needs).  Before you buy a new 4 GB sansa fuse, so I need to know if this greatest player will play my podcasts consecutively and one after the other.  Your advice would be much appreciated.

  MrHat wrote:

  I currently use the Sansa e250 2 GB MP3 Fuze player Walkman.

  There is an e250 (2 GB) and a rocket. They are 2 totally different players. The "rocket" (original) replaced the e200 series model.

  But if your podcasts are placed in the Podcast folder (or even record Audio books) and then ranked in the same "Album" folder, they must play consecutively without stopping, regardless of the model of reader.

• Playing several clips video one after the other on the main timeline

  Excuse the probably simple question but I'm just starting with Flash.

  I imported a few trailers directly in flash and saved as video clips.

  I want to be able to insert these clips on the main timeline and play one after the other, by repeating once they all played.

  In the main timeline, I put one layer for each clip and a keyframe where the clip is inserted for each layer.

  When I go to play the flash file, is to show the first frame of each movie file and before the first frame of the next movie file.

  What should I do to make the entire movie file flash game in this specific context before moving on to the next section where is the following file in the sequence, then to play all this film?

  Sorry for what is probably a simple thing to ask.

  Thank you

  Create a new layer actions on the timeline stop() and the main square. commands on this layer in each frame where resides a movieclip.

  In each clip, at the end (last image) you mean the main timeline to play(); While it moves to the next section (where it stops because of the stop() commands you add).

  If at the end of each movieclip you put either:

  AS2: _parent.nextFrame ();

  for AS3: MovieClip (parent) .nextFrame ();

  For the last movieclip in programming, you will replace nextFrame() by gotoAndStop (1);

• div floating above the other div that has the image inside. Help, please

  Hello
  
  the page is http://blackpaint.co.uk/BlackPaint09/films/
  
  I'm trying to make sure the DIV "SlantedWritingFilms" floating above the image that is in the same div - without it pushes the image down.
  
  Maybe it's easier to look at the code:

  .SlantedWritingFilms {
       position:relative;
       font-family: Georgia, "Times New Roman", Times, serif;
       font-size: 20px;
       font-weight: 100;
       font-style: italic;
       color: #000;
       letter-spacing: 3px;
       padding-right: 20px;
       padding-bottom: 4px;
       padding-left: 9px;
       padding-top: 5px;
       top: 0px;
       -webkit-border-bottom-right-radius: 1ex 1ex;
       background-image: url(../images/Semi-transparent.png);
       left: 0px;
       visibility: visible;
       z-index: 5;
  }     
  
  
  .FilmStill {
       background-color: #000;
       width: 375px;
       height: 140px;
       margin-left: 30%;
       margin-top: auto;
       margin-right: auto;
       margin-bottom: auto;
      border-style: none;
  }

  and HTML

    <div class="FilmStill">
    
       <span class="class1"> 
   <span class="SlantedWritingFilms"><a rel="shadowbox;width=2000;height=1000;options={flashVars:{clip_id:1280592,autoplay:'true'}}" title="Eyelids" href="http://vimeo.com/moogaloop.swf">
  Eyelids 
   </a></span>
  </span>
  
     <a rel="shadowbox;width=2000;height=1000;options={flashVars:{clip_id:1280592,autoplay:'true'}}" title="Eyelids" href="http://vimeo.com/moogaloop.swf" id="triggereyelids" ><img src="../images/buttons/eyelids-button.jpg" width="375" height="140" border="0"/></a><div class="tooltip"><span class="HoverWritingParagraph">A short experiment of a film</span><br />
  <br />
  <span class="HoverWritingHeading">2007<br />
  Dur: 2min30</span>
  </div>
   </div>

  I'm sure it is a simple - but I can't find the answers!
  
  Thanks a lot for help

  As you have discovered, two elements to the surface of a

  cannot occupy the same space. The solution by getting one of the elements to "sleep," it totally down the surface and that in fact a background of it either by actually "levitation", one above the other.

  • Apply a unique id to each div in which is now a picture.
  • Place each image in the background of the div, define in your CSS.
  • You will not then be able to use the image as a button, and you may want to add something to click on.

  OR (this second way is preferable)

  • Change the . FilmStill definition by adding position: relative;
  • Change the . SlantedWritingFilms definition by adding position: absolute; and positioning attributes (left: 0; top: 0; for example)
  • Change to each . SlantedWritingFilms in one
    within the

    .

  Beth

• FF jump between tabs if I have several open at the same time and it sometimes seems to be trying to load the same page one above the other

  When running FF for awhile, it starts to jump between different tabs I have open without clicking anything whatsoever. Also, it will sometimes appear that another copy of the same tab I have open try to open again at the top of page. The address bar that appears at the bottom of page loading will appear one above the other and the page will jump up and down about a 1/8th of an inch. Out of the enclosure, then by restarting FF does not solve the problem. I have to restart the computer and then restart FF for him to quit.

  I changed to Chrome and it doesn't, but I prefer the FF browser so I can get this fixed number.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• A video on any website is presented in double, one on the other!

  Every time I want to see a video, any site, it is case, the screen, the video is on, shows two images from the video. Basically, the video is condensed into two, one above the other, making them wider, but I don't know why he show two!

  This appears to have happened after the last update of Adobe Flash Player. Could be a compatibility issue with Firefox, because the problem does not appear in Internet Explorer. Have not yet tried all other browsers.

  For me, it seems that the two images that appear are similar to those used in the manufacture of 3D movies, but instead view overlap them, they are displayed separately. It's just a wild guess and I have no evidence to back this up.

  PS: I also use Firefox 3.6.13 Windows XP.

  Later edit: I found a work around for this problem. Right-click on any incorrect display video and choose settings. On one of the tabs found there is a checkbox "enable hardware acceleration". It has been activated for me, after having stopped it and restart the video browser was back to normal.

• Satellite A100-411: one or the other DVDs cannot be recognized

  Hello

  I work with my new Toshiba a100 411 since the end of February here at I m happy w / my choice.
  The only point is that I found that one or the other DVD cannot be recognized by the Pioneer K17A.
  Need me possibly new drivers?
  Thks in advance for yr help.
  Jürgen

  Hello

  Hmm I n t think so.
  As far as I know that these drives support not all CD or DVD and it s nothing unusual that one or the other DVD may not be recognized correctly.

  Sometimes a firmware update could allow the reader to recognize more kind of CD and DVD, but on the other hand, no one can say that this update might help.

• I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I understand that if my Apple Watch is unlocked (or on my wrist) incoming Message notifications will be displayed on my watch. This allows to bypass the notification on my iPhone for messages.  I would like to find a way for Message notifications to simultaneously alert me on my iPhone and Apple Watch.

  Thoughts?

  Hello

  If you disable the detection of wrist (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection), it will make all notification alerts to be delivered to both devices. However, you will not be able to benefit from features including screen Wake on wrist lift, Apple pay and one unblock after placing the watch on your wrist.

  If you want Apple to consider adding an option for notification alerts to be delivered for both devices regardless of the other settings, you can suggest here:

  https://www.Apple.com/feedback/watch.html

• Why is my media player of securities randomly suddenly played on every album & not as shown, one after the other?

  All of a sudden my Windows Media Player (11) started playing the songs on each album random & not one after the other in chronological order, any ideas anyone please?

  Hello

  To better understand the issue, please let me know if you have made recent changes made on the computer before this problem?

  This problem may occur if the Windows Media Player settings are incorrect.

  Method 1:
  Let's first run the fixit and check if it helps.

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2:
  If the problem persists, I suggest you organize your digital media collection
  and check if it helps.

  Organize and search your digital media collection
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/library

  Check out the link for more information.

  Create and use your own customized reading lists
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/playlists

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I managed to remove the icon to display all open windows one behind the other.

  I managed to remove the icon to display all open windows one behind the other.  Where can I find it now?

  Also, my laptop keeps getting an error when I try to restore to an earlier date and told me that it is impossible to complete.

  Hello

  Which, in my view, that you have a problem with, it's called windows Flip 3D!

  Try this first and see how you go...

  1. To turn on the Quick Launch bar, follow these steps:
  2. Right-click anywhere on an empty spot on the taskbar.
  3. Choose toolbars from the menu that appears.
  4. Select Quick Launch in the following menu so that it is checked.

  You should then be able to click the icon to switch between Windows now and use the 3d Flip...

  Or

  . Right click on the Quick Launch toolbar, but not on an icon
  2. Select the folder from the context menu. It will take you to the Quick Launch folder that should live:

  C:\Users\username\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  3. right click in an empty area of this folder
  4. Select new, then shortcut from the context menu
  5. for the location text box, enter the following text:

  C:\Windows\System32\rundll32.exe dwmapi #105

  6. click on the next button
  7. appoint. (Flip3D, for example)
  8. click on finish

  The shortcut will now be in your Quick Launch toolbar.

  Concerning

  GT4U

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.