Replace the Panel of e/s on Presario SR5310F

Similar Questions

• can I replace the graphics card on my compaq presario cq71-308ez?

  can I replace the graphics card on my compaq presario cq71-308ez? It must have a dedicated graphics card which should be variable... If it can be replaced, what type of cards can be used...

  thx to advancce

  Hello

  The G 103 M of your laptop is integrated into the motherboard and therefore, is not an evolutionary element.

  Kind regards

  DP - K

• I need to replace the hard drive for a campaq presario v5000 laptop

  having trouble with the laptop is very slow or freezing upwards.  Had he wiped and all the info on it but did not help the cause.  Message has started to come up on top of the hard drive and then it just stopped working.  My daughter who works in the field of Informatics said I need a new hard drive.  So now I need to know what parts I need to buy

  Just a new hard drive.

  

  Above is the image of the Bay on the lower part of the lasptop where the player will. You need an old drive portable PATA (IDE) model. Remove the drive from the caddy and replace it with a new one, new plug-in and recharge your software and you're good to go.

  Here's a disc that will work for you to newegg.com:

  http://www.Newegg.com/product/product.aspx?item=N82E16822152110

• replace the Panel background color

  Hello

  I am using a theme of Adobe (GraphiteGraphical). It's a bit too dark for my Panel containers. I would like to set the background color.

  I am able to adjust the background color of the Application in the CSS file as follows:

  s | {Of the application
  padding-top: 10;
  padding-bottom: 10;
  padding-left: 10;
  padding-right: 10;
  vertical gap: 4;
  background-color: #CCCCCC;
  
  }

  I can't do it for my signs. Why? And how can I achieve this?

  I need my Panel background is the same as the application. Currently, they are much too dark. Help?

  Very well. Try this

  MX | Group of experts
  {
  Border - Skin:ClassReference('mx.skins.Halo.PanelSkin');
  backgroundColor: #FF0000;
  }

• Compaq Presario SR5214x: Replacing the CMOS battery for Compaq Presario SR5214x desktop computer

  How to replace the CMOS battery on a Compaq Presario SR5214x desktop computer. What type of battery? Where is the battery? Thank you (deleted content)

  @ernier

  You will find how to do here.

  http://h10032.www1.HP.com/CTG/manual/c00840496

  REO

• Notice - the upgrade to Windows 7 after replacing the hard drive

  I am replacing the failed hard drive in my Presario V6305NR & considering the upgrade to 2 GB of Ram.  Should I try to reload Vista or can I switch to a new total installation of Windows 7?

  If the upgrade to Windows 7 is feasible, how & what problems can be expected?

  1-Yes, the next step I would try is remove the card and start once without him.

   

  2 - Yes, there were numerous reports of failure wireless and/or the chip Nvidia dv graphics and v made two or three years before. Unfortunately, most of the people seems to result from the motherboard. There is even an American in effect now colony for many models (US). www.nvidiasettlement.com  

• Replaced the faulty hard drive

  Hello

  I replaced the defective hard drive on my Presario CQ61 - upgrade to a 500G SATA drive.  Booted up the system repair disc, I created when I bought the computer.  I ask myself a lot of questions about the folder in which to select.  I assumed it would happen automatically.

  Can anyone help please?

  Thank you

  MOFMan

  Hello

  Assuming that you are referring to Windows 7, there is a good guide on the link below for the present - to ensure that if the Disk Image is saved on an external HARD drive, that it is connected before starting.

  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup/

  Kind regards

  DP - K

• Dynamically, to replace a Panel in a palette?

  Hi, my question is this:

  My plugin has a palette with a Panel and two modes. These two modes are expected to show another Panel in the same palette. the transition from one mode to the other, the content of the palette (aka the Panel itself) are replaced with the sign of the second mode.

  I already looked at the example DynamicPanel, but this does not replace the Panel, but it dynamically creates new palettes with new panels.

  Thanks for any help I can get!

  Dirk and Bartek thanks for your answers!

  I ended up do like I said before, because it has proved to be the easiest way.

  I included all the widgets in a Panel and set them visible/invisible mode. the code is as easy as the following.

  (in my c ++ method where I check for mode)

  IControlView * SomeButtonControlView = VARUtils::GetWidgetOnPanel (kMyPanelWidgetID, kSomeButtonWidgetID); acquire the controlview in the specified widget

  check for my condition

  If (loggedIn is true)

  {

  SomeButtonControlView-> ShowView();

  } else {}

  SomeButtonControlView-> HideView();

  }

  VARUtils::GetWidgetOnPanel method

  / * GetWidgetOnPanel

  */

  VARUtils::GetWidgetOnPanel (IControlView *)

  const WidgetID & panelWidgetID, const WidgetID & widgetID)

  {

  IControlView * controlView = nil;

  do

  {

  InterfacePtr

  panelData (Utils()-> QueryPanelByWidgetID (panelWidgetID));

  Do not say, fail silently, the tree view panel can be closed.

  if(panelData == Nil)

  {

  break;

  }

  controlView = panelData-> FindWidget (widgetID);

  Assert (controlView);

  if(controlView == Nil)

  {

  break;

  }

  } while (0);

  Return controlView;

  }

  Thanks for your answers, they helped me understand what I needed!

• Installation of restore in Compaq Presario V2000 after replacing the hard drive disk

  I have a Compaq Presario V2000, I had the hard drive replaced at CompUSA.  The drive is a 250 gig to replace the original HD 40 gig.  When you load the restore of the operating system (Windows XP) disc nothing happens just a note on the ethernet controller and the media test failure then exit ROM PXE.  How to load the operating system.  I follow the procedures on the Web site?

  Thank you very much.  After a discussion at CompUSA, they decided to try another HD concert 160 instead of 250. Wallah... OS began the installation of restore disc program.  It is a problem with the new hard drive.

  Help a what to do CompUSA actually tech the problem finally.

  Thanks again!

• How to replace the LabVIEW icon in the upper left corner of the panels?

  Hey Gang,

  We will create an application that will go to customers.  We want to replace the LabVIEW icon in the upper left of the panels with the company logo.  How can I replace that?

  All responses will be appreciated.

  Thanks in advance,

  Roger

  Create the icon you want to there are several editors of ico on the market (I usually use one of the freebies) and save it in your project.

  In the Application build spec select the icon section, clear the default checkbox and choose your .ico in the pop-up.

• Link to find out how to replace the battery in the clock on laptop Compaq Presario 1247

  Once upon a time, I had a link to a guide who offered guidance on how to access the motherboard in order to replace the battery in the clock on an old laptop Compaq Presario 1247. Can anyone provide this link?

  Hello

  This should be the Guide of maintenance & Service you're looking for.

  Kind regards

  DP - K

• I got a low ink warning on my mac for my printer epson artisan 837. I replaced the cartridge, which was low, but he still reads the low ink level on the mac, but full bed on the epson Control Panel.

  Well, I replaced the cartridge as usual, and osx is not that the printer is now complete: says, "printer may be out of ink" on the status. Ink levels will be not displayed via the computer but check out on the printer.

  Restarted both units and in vain.

  WiFi is not a factor.

  If anyone has a solution or any ideas, please help.

  Thank you!

  You can try to disconnect the printer, restart the computer, reconnect with the printer, and then try again.

• Compaq Presario CQ56: Try to replace the fan, do I need radiator?

  Hello. I am trying to replace my fan it starts to go.

  I need to replace the fan AND the heat sink (they appaear to be attached to another)? Is it possible I could buy just the fan itself, simply remove the old fan heatsink and then attach it to a new fan? Or would remove the damaged radiator? If I can remove it and reattach to another fan how what to do?

  The manual shows the part number is 606573-001, but I can't seem to find where to buy with a heat sink in any case. I find only individual fans and it seems not can I buy it separately the radiator. Where my question.

  Thank you.

  Usually, the fan is held in place with a few screws. Simply remove, remove the fan and replace it with the new fan.

• Compaq Presario CQ42-234TU: replace the HDD with SSD

  Hi, I want to know if I can replace the HARD drive with one Sumsung EVO 850 500 GB SSD, if not what other SSD can be used?

  Yes, but it's a lot of money to spend on a laptop that is likely worth less than the cost of the SSDS (about $175 I guess). The specifications of this model are in the end very low what can even run an SSD efficiently. The SSD will help, but the money could be better spent on a new machine.

• Replaced the cable. Now, the screen does not work. What could be?

  The cable coming out of the back of my monitor Apple Thunderbolt Display is fraying. I decided that rather than risk a short at a certain point, I preemptively replace the cable. On iFixit teardown photos, I decided to replace the cable coming out of the back of the screen myself instead of paying almost $200 to get an Apple service provider to do that here in Bangkok. Bought the cable on AliExpress for $12. It replaced. And... no dice. Screen has not come.

  My setup

  [MacBook Air]-[Thunderbolt Display]-[drive Thunderbolt]-[Cinema Display]

  with a key USB drive and Ethernet connected to the back of the Thunderbolt display

  Already tried this

  • First impressions were that the cable was defective. But then I noticed Ethernet came the USB has been mounted, Thunderbolt was mounted drive and after a reboot, the movie screen come also. Obviously, the cable has been working very well.
  • Second thought was that I'd neglected to plug some cables that connect the LCD to the main logic board. I checked. Seemed fine.
  • Third was maybe the serial number of the cable was somehow connected to the main logic board. So I put the old cable. Still no screen.
  • Tried to connect the screen with a Thunderbolt external cable, everything worked as well but still no image on the screen.
  • Tried more than 30 seconds and 3 hours disconnected as a "reset" of the screen. No change.
  • Restarted my laptop. No change.
  • Thunderbolt Display well plugged the drive and then into the MacBook, so change the sequence of the devices. No change.
  • Information reports under "Thunderbolt" the entire chain of devices, but under "Graphics/displays" system displays only the internal screen and Cinema Display.
  • Using the newly purchased cable as a Thunderbolt external cable works fine too.

  Question

  Does anyone have suggestions on what to try next?

  The logic card goes into a sort of locked mode when you replace the cable?

  Is there more than 3 flat cables connection + connection to the land between the Panel and main Board?

  Although there is no reason to think that this has been, how to test LCD screen still work given all these flat cable connectors?

  
  

  Note: There is no Apple here store.  Apple authorized service providers are without help. He suggested to replace the cable and the Panel at a cost that is almost the same as the purchase of a new screen.

  Some of the cables that connect the LCD to the main logic board, are very short. Careful lifting the LCD, because it will go away with strength cables once that raise you it more than 2 to 3 inches on the side of the camera module.

  The shorter cable of all is the LVDS cable. A short cable with gold plated connector. Although I have had reconnected the cable on the side of the logic board, I had wrongly assumed that the other end of the cable was stayed connected because all the band used on. Someone with experience of fixing these things said of his town for this cable to unravel by force and to be sure to check both ends of the cable. When I peeled back the tape, I found that he had indeed been disconnected. Reconnect, fiddling with the tiny workspace to get the logical side of Board of Directors of what properly fixed cable again and we were back in business.

  Apple authorized service providers here in Bangkok have quoted me $200 to replace the cable. I ordered the replacement cable Thunderbolt Display off AliExpress for $12.50. It was really simple to replace the cable, just to keep an eye on this darn LVDS cable opening to the top of the screen!