Compaq Presario CQ56: Try to replace the fan, do I need radiator?

Hello. I am trying to replace my fan it starts to go.

I need to replace the fan AND the heat sink (they appaear to be attached to another)? Is it possible I could buy just the fan itself, simply remove the old fan heatsink and then attach it to a new fan? Or would remove the damaged radiator? If I can remove it and reattach to another fan how what to do?

The manual shows the part number is 606573-001, but I can't seem to find where to buy with a heat sink in any case. I find only individual fans and it seems not can I buy it separately the radiator. Where my question.

Thank you.

Usually, the fan is held in place with a few screws. Simply remove, remove the fan and replace it with the new fan.

Tags: Notebooks

Similar Questions

  • Compaq Presario CQ56: a problem with the computer keyboard laptop presario CQ56

    All keys (F) Act as the FN key is been held down when it is not. This just started today. I have a free prog called "keyboard test utility. Now, I have discovered that I can get 1 clean tap of F4 and the prog to test keyboard shows only illuminated F4. The next time I hit the letter (P) F4 and the Windows key are lit. Now, if I tap the FN key, and then press the F4 key. Again, F4 is the only 1 who turned on the prog of test. It's almost like the FN button nosed. I just to confirm. Rather than hold down the FN key to get things under the keys (F) (as a volume-, volume +, cut and so on). Now, I have to hold down the FN key to get the regular F1 to F12 keys. The rest of the keyboard is fine. A regular toggle switch or a switch in a radio push button. The FN key acts like someone ripped the wires to the back of the switch and reverse the wires and the switch can operate in reverse. Beats me how this can happen to a laptop keyboard.

    Steve

    Hello

    Here are a couple of things to try.

    1. judgment of the laptop.  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    2. try to change the default action of the keys 'f' as follows.

    Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02035108 & DocLang = in & docLocale = en_US &...

    Kind regards

    DP - K

  • Help! 3rd day wireless on the Compaq Presario CQ56 no response to the 1st don't post :(

    It's day 3 of no wireless on my laptop. I reset my router several times without success. My phone works fine and the laptop can see the network simply do not connect. My WIFI is on and according to Device Manager, I have the latest version of the driver for my adapter WiFi Ralink RT5390 802.11 b/g/n. I did uninstall and reinstall, but that no longer works. Please could someone answer me? I tried to post yesterday but I got no response. I really need help.

    Hi Colleen,

    Please try the ping and test DNS server. We are beginning to run out of options, it's looking like it could be the wireless card. To confirm this, you could look for an adapter Wireless USB that would plug into a USB port and to capture the signal from there. The computer's wireless adapter could be replaced, but if the USB wireless adapter correctly would be the cheaper of the two options.

    Thank you

  • No audio in my Compaq Presario CQ56-can I replace it?

    The audio just stopped.  Services troubleshooting, all the rest apparently is OK and the problem does not appear in Device Manager.  Is there a replaceable part?  It is of course just out of warranty.

    Hi Helen,

    Try the following.

    Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50720.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek audio device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    Chipset Driver - Windows 7.

    Once this done, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • Compaq presario cq56-115dx: bios password began to appear on a presario cq56-115dx laptop

    I have Compaq presario cq56-115dx and got the 53346355 Lock password can u help me

    @wickedkidd

    Enter 42024991

    Kind regards

    DP - K

  • DV7-6153er replacing the fan

    Hello! After 3 years of use, I found 2 cracks on the cooler fan blades. I need to replace the fan, but I need to know, to do for all portable computers dv7 series coolers are identical and compatible (for example - I found in the cooler shop for $ 4 and it is marked as compatible dv7 6000 series, it will be compatible with my dv7 6153er)?

    Not the series 6xxx even are will be because cpu/gpu configurations of different fan/radiator installation.

    Also doubt $4 many fan will buy at least that he used a cheap copy of China.

    Quality original nine fan is going to be $ 9 to $ 19 while waiting on luck & how much effort you put in, usually if you have the fan brand name & model numbers, you can track down cheap quality so that if the price of sourcing by laptop model has a premium...

    http://www.eBay.com/ITM/original-new-CPU-cooling-fan-for-HP-Pavilion-dv7-6152sf-dv7-6153ea-dv7-6153er-/121153655858?PT=US_CPU_Fans_Heatsinks&hash=item1c35521432

    Be careful as the Chinese copy or without fans no expensive name are terrible...

  • I have a compaq presario cq56-115dx notebook pc and I wiped the hardrive without knowing

    Hello

    I have a Compaq Presario CQ56-115DX laptop running on Windows 7. I wiped the hardrive without knowing what would happen, and now when I turn it on it has a black screen with a white dash flashes. I was wondering if there was a way to solve this problem.

    Thank you!

    Hello:

    You will need to order a set of recovery disks.

    http://support.HP.com/us-en/document/bph07143

    Or if you can read your Microsoft W7 product key you can make your own windows 7 installation disc.

    Here's how:

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.

    http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

    Paul

  • My battery on my compaq presario cq56 is not recognized. It's not even an icon for it. Hp support assistant said trying the update of the bios battery. I can't find to download... Help, please!

    My battery on my compaq presario cq56 is not recognized. When I ran the test on HP support assistant, he says take the battery off and then powered off and that did not help. He said to ensure that the latest version of the BIOS battery has been installed but I can not find how or where to do... someone know how and if it is the best thing to do?

    Hello

    This document includes the steps of research, download and installation of updates to the BIOS (Basic Input Output System) or ROM (ROMPaq) for your HP or Compaq laptop.

    Update for AMD processors

  • Compaq Presario CQ56: System disabled

    My Compaq Presario CQ56 shows system 98207381 disabled when I try to start it. I searched the forums and find other codes, but not this one.

    Can anyone help?

    Thank you

    TERI

    @Heavenlee05

    Enter 27165907

    Kind regards

    DP - K

  • Compaq Presario CQ56: BIOS password lock

    I bought a HP Compaq Presario CQ56 model on eBay for $25 with screen cracked and no hard drive. I wasn't informed that it is has a password for BIOS-_ - after you have entered the incorrect password three times I get the key: 34915346 error and it keeps let me try again after the reboot. Can someone please help me with this?

    Hello:

    Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

    stems-and-software/system http://h30434.www3.HP.com/T5/notebook-operating-Sy...

  • Compaq presario cq56: Bios password

    I have a COMPAQ PRESARIO CQ56 and suddenly asks me the password of the bios.
    The message that appear isENTER PASSWORD or POWER ON PAST ADMINISTRATOR password".
    What can I do?

    Deactivation of the system 73277861

    Josh

    Try: 62155267

    Concerning

    Visruth

  • Compaq presario cq56 primer not.

    Model: Compaq Presario CQ56-219WM

    I've had the computer for only less than a year. When I press the power button, the computer starts, appears red 'Q', then 'hangs' on a black screen with an underscore flashing. I ran the diagnostic tests available and everything SEEMS fine, but it still does not boot past the black screen. Tried a hard reset, still no luck.

    Hello

    Assuming you are using Windows 7, try the following.

    If you do not, use another PC to create a Windows 7 recovery CD.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as having a 64-bit installation...

    Windows 7 32 bit

    Windows 7 64 bit

    You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

    Demarrer start from the rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

    Bootrec.exe

    bcdedit/export C:\BCD_Backup

    c:

    Boot CD

    BCD attrib s h - r

    Ren c:\boot\bcd BCD.old

    Bootrec /RebuildBcd

    Bootrec /fixmbr

    Bootrec /fixboot

    Remove the rescue CD and try to restart now.

    Kind regards

    DP - K

  • Wireless adapter driver for Compaq Presario CQ56

    Hi, please help me find the right driver for my wireless network card.

    Hardware ID:

    PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
    PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
    PCI\VEN_10EC & DEV_8171 & CC_028000
    PCI\VEN_10EC & DEV_8171 & CC_0280

    Windows 7 64 bit

    Compaq Presario cq56

    Thank you very much

    Hello

    Try: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-102574-1

    Kind regards

  • Compaq Presario CQ56-115DX power on password

    I need help wih the power on password for my Compaq Presario CQ56-115DX

    ~ Thanks in advance

    Hello

    Enter: 66760919

    Kind regards

    DP - K

  • Compaq Presario CQ56: Forgotten password

    My Compaq Presario CQ56 throws me an administration password and when I try to enter it, it gives me a code system with disabilities... 82527050... I know not what to do, please help, everybody. ...

    #HPExpertDay

    Try:

    33485096

Maybe you are looking for

  • connection problems with the version 6.18.0.106

    Hello I have Windows XP and I have always used an earlier version of Skype, but now the old version is retired and I can't use it. So I download the new version 6.18.0.106, but this one has a connection problems. Every 4 seconds, I am offline and the

  • separate the AO and CO

    Hello Can someone help me diagnose the problem. I have a program to generate output of counter that is triggered by an area of OCCUPANCY of 2 channels. the output of the countered is connected to the route of the RTSI. This program works well. Then I

  • lnstalled 2000 to SQL Server 2008 and error message it is necessary install previous to restart the computer

    Original title: sql I install sql 2000 Server 2008 always message like this it takes a previous installation to restart the computer. I reboot several times the same problem or a message when I try to run the installer.

  • VPN clients hairpining through a tunnel from site to site

    I have a 8.2 (5) ASA 5510 in Site1 and a 8.2 (1) ASA 5505 Site2 they are configured with a tunnel from site to site. Each site has VPN clients that connect and I would like to allow customers to access on both sides across the site-to-site tunnel ser

  • Removing a node remove undo and arc journal thread

    11.2.0.2.01 deleted my 3 node at the end of week rac nodes.  everything is fine, but a number of things happened unexpectedlyI ran that the deleteinstance, deletenode, removed clusterware all very well. On one of my cases, I went to turn off journal