replace the screen and cable videi

Similar Questions

• blue screen after replacing the battery and charger / need of Windows XP Pro disc

  Hi all.

  I bought a used laptop from gateway with Windows XP Professional already on it. The person I got it never gave me the disc of Windows or textbooks and it is out of warranty. I had to replace the battery and the charger after 3 months of use, and it now gives me the blue screen.  I can't enter in safe mode, it gives me just all sorts of codes for Win32 /? (different things). SYS. The blue screen also tells me if this keeps continues to go to F8(Advanced Options), and then choose the option. I called my local tech and he said contact Windows to get a disk to fix the problem. How can I do (I'm not a comp WIZ). So I try here to get any help. I am on a borrowed laptop so if you can help, please send me a personal email to * address email is removed from the privacy *. I get their

  After reading the owner's manual for the NX260X (Chpt. 7, p. 72-74) I am convinced that the laptop, as previously indicated above by PML, is originally came with Windows Vista.
  http://support.gateway.com/s/manuals/mobile/8511886.PDF

  In addition, according to the instructions of the manual recovery (pg.74, means only available recovery Windows are re - install using the supplied DVD.) This is meaningless given that bridge claims the recovery partition was part of laptop computers sold after November 2004.  I agree that, if you decide not to try to fix the errors, you should consider Windows 7.

  However, personally, I would try to fix the mistakes here before you spend a minimum of $100.00 for Windows 7. We usually have a pretty good success rate when the OP stays with the subject.

• Re: Satellite A210 and replacing the screen

  Hello

  I need to replace the screen on my A210 - 1 4. An A210-1AS screen would fit this model?
  Any help appreciated thanks.

  According to the specifications of the laptop the two models of laptops have absolutely identical displays, so you can use it.

• ENVY of HP DV7 - replacing the screen 7230us

  Just a few questions if you let it. Unfortunlsoately my laptop fell on the floor and the screen cracked. I have a new replacement on the way. Mind you, I replaced the screens of laptops before gently and smoothly. On each of them, in the place where the cable Ribbon which extends from the motherboard and attaches to the screen he is and was a warning label 'do not touch'. Take this warning seriously I've always avoided this and do not touch.  On the WANT DV7-7230us the place where the ribbon cable connection is made it is difficult, but not impossible, to do not touch this area. It is a possibility, I might have to hold a small area to re - attach the cable on the new screen. My question is why he cannot be touched? I somehow damage the new screen if I accidentally touch or hold this area? Just one simple answer other than 'just don't touch' would be great.  Thank you.

  Al Hebert

  ahebert wrote:

  Just a few questions if you let it. Unfortunlsoately my laptop fell on the floor and the screen cracked. I have a new replacement on the way. Mind you, I replaced the screens of laptops before gently and smoothly. On each of them, in the place where the cable Ribbon which extends from the motherboard and attaches to the screen he is and was a warning label 'do not touch'. Take this warning seriously I've always avoided this and do not touch.  On the WANT DV7-7230us the place where the ribbon cable connection is made it is difficult, but not impossible, to do not touch this area. It is a possibility, I might have to hold a small area to re - attach the cable on the new screen. My question is why he cannot be touched? I somehow damage the new screen if I accidentally touch or hold this area? Just one simple answer other than 'just don't touch' would be great.  Thank you.

  Al Hebert

  Hello

  I think that the warning "do not touch" is intended for the Board of LCD screen.

• Replacing the screen Acer V5-573p-6486

  Dear Acer users/professionals/support,

  I need to replace the screen on my ACER V5-573P-6486:
  -a screen (screen current) HD 1366 x 768
  b (replaced by) screen FULL HD 1920 x 1080 (w/o digitizer)

  Please let me know:

  1-compatible with FHD screens?

  2 - eDP 30-pin flat FullHD video cable? (if necessary)

  3 - a screen from other models, such as the V5-573 P-9899or V5 - 573 G would correspond?

  Thank you very much

  All (Acer part #s) for replacement of computers screens portable V5 - 573 is 1366 x 768.

  Found this at:

  https://forums.Lenovo.com/T5/ThinkPad-T400-T500-and-newer-T/replace-T400-WXGA-LCD-with-WXGA/TD-p/145...

  "You can easily change the Panel, WXGA with a WXGA + as long as you don't change a CCFL from an LED backlit panel. The LCD cable is the same for both the WXGA and WXGA + CCFL baclit LCD Panel.

  If you want to change out for a LCD backlit LED WXGA +, you also need to it's respective cable LCD, as it is different from that of the cable for the LCD CCFL backlit. »

  If your graphics card supports Full HD, follow these guidelines and it can work.

• BlackBerry Storm 9500 Smartphone - phone don't read do not my SIM after having replaced the screen (vodafone PAYG).

  I recently replaced the screen on my Storm 9500, ensuring that the screen I bought was an exact match, paying special attention to the color of the flex cable and all the serial numbers. After turning on at the end of the replacement of the phone work as usual, all the menus and functions are in perfect working condition. The only problem I have is the phone is not reading the sim card there is now a message at the top of the screen that reads "insert sim card". The upper right corner of the screen indicates "SOS". I tried to give the SIM to a clean place and also tried another card sim vodafone with the same result. I thought that maybe the new screen needs to be reconfigured or something. Anyone have any ideas?

  Thank you very much

  Gary...

  Hello

  Tried the biggest pieces of paper and it worked a treat, thank you very much for your advice, it was very appreciated!

  Thank you very much

  Gary

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• Blue screen in decline after replacing the screen

  I got my iPhone 6plus screen replaced at an apple store, earlier this week, and now a random regression a blue screen appears from the top of the screen and goes up and down, disappears, then pops up. Meanwhile, the screen is not sensitive to the touch, but when it stops and I double finger restart my phone several times, it works perfectly fine, then at random again. I've already set up another appointment on the apple store. What is an internal error and apple will charge me to fix this?

  It's either a problem with the screen replacement and Apple will not charge your for this or there is also damage to the logic board and you need to replace the entire phone. There will be an extra charge for this.

• How to replace the screen-Portege 3500

  Hello

  Please could you give me some advice or instructions on how to remove and replace the screen on my laptop?

  The external glass is intact, but the actual screen itself is damaged.

  It would also be a great help if someone knew the product number of the replacement in this way screen I should be able to buy the right pair.

  Thank you for reading
  Kind regards

  Hey mate,

  First of all I must say that replacement of the screen, and the disassembly of the laptop is usually quite complicated and delicate. You must remove a large number of screws, it must be very careful. So it's not easy to replace the screen.
  Maybe you can find some instructions if you're looking for with Google

  And a replacement screen or number, you can get your authorized service provider. Simply contact the guy and ask for help and they can exchange the screen too.

• Replacing the screen on Satellite C50-A-1CK

  Hello

  The screen of my C50-A-1CK Satellite was recently broke and I need a replacement, but I have no experience with this sort of thing. Editing actually screen won't be a problem (I'm lucky enough to have friends who will fit it free) but I need to buy one and I'm not sure which one to buy.

  I'm looking for something around £40 or less if possible, and I'm in the United Kingdom, if a British salesman would be best. I would prefer to get one on eBay, if possible, so I would really appreciate if I could get a link rather than just "oh looking for it and you will find.

  I thank very you much in advance!

  To be honest, it is not easy to give you some good advice on this. Why? Replacing the screen is rather complicated and almost entire laptop must be disassembled. To do this you need manuals maintenance with explanation step by step how to do this and avoid any damage. This document is not a public document, so I do not know who want to help and how.

  If a person without experience and expertise want to do this, can damage your laptop even more. There are many smallholders plastic that can be broken or damaged.

  I don't know, but in my opinion, you should contact Toshiba service nearest and ask for help. It costs a little, but it will happen on the vocational track.

  Anyway, I don't live in the UK so I don't want to pick you up. You can check ebay UK and search for 15.6 HD 200 CSV LD and if you find a seller contact by phone and check compatibility with your laptop satellite.

• Replacing the screen satellite U840-10V

  Hi guys,.

  My Satellite U840-10V hinge on the right side screen broke when I accidentally dropped the laptop. This happened almost 2 years ago and today he is out, which separates it from the window of the screen. I had this problem temporarily to a nearby repair shop and was advised to contact toshiba to replace the head of screen. my warranty expired in 2013 and I did not apply to it.

  Can someone advise the best course of action to replace the screen? I live in ealing, London and am able to go to a provider of services close to who would be able to replace it. I like really this laptop and I would like to replace the screen as soon as possible instead of dishing out money on another new laptop.

  Kind regards

  Raaqim

  repair shops dealing with computers laptop toshiba would be very useful.

  If you are looking for an authorized service provider, I recommend this page:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  You will find all available world-wide ASP.

• Replace the screen for one with a higher resolution on Satellite P850-12Z

  Hi all

  I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].

  Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?

  I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.

  I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.

  Thank you in advance.

  Hello

  Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
  I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.

  You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.

  All this is quite complicated.

• Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

  Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

  You can buy a worn integers for that.

  Only if your machine is Virgin and you want only one specific

• Satellite M30X-115: I need to replace the screen

  Hello

  I need to replace the screen on my laptop but I can't find references one is on. Is it possible to have this references or references to a compatible standard model and of course, an easy to find the object: o)
  Thanks for the help of the Tower

  Hello

  As far as I know the Satellite M30X was delivered with a screen 15.4 "(1280 x 800) view wide TFT color display."

  Only the dimensions of the screen are important. So if you want you can search a 15.4 "display.
  By the way; the display is one of the most expensive parts of laptop. Perhaps a second hand M30X, or a display of second hand would be a better solution as to buy a new screen for around $ 300.

  Greetings

• How to replace the screen & HDD in Tecra S1

  Could someone help me with 2 queries?
  1. how to replace the screen? I broke my screen 15 "and have a replacement original but would like to know if this is possible without the help of the reseller, etc.
  2. bad drive c. message is 992 KB bad clusters. How to replace or repair the C drive?
  Thank you
  BL

  Hello

  Well, the replacement of HARD disk drive is very easy on the Tecra S1.
  At the bottom of the unit, you will find a cover that protects the HARD drive Bay.
  A screw covers. Remove it.
  Then, it should be possible to remove the HARD drive.

  The replacement of the screen is another matter. It is not easy to remove it. In this case I recommend to contact Toshiba service in your country for details.