Replace the XML data using AS3

I have a file called temp.xml saved on the localhost (I'm under wamp to test), and it has this in it:

<?xml version="1.0" encoding="utf-8"?>
<1>
<SAVEDATA pos="1"/>
</1>

The idea is, you get to control pos points = "" could be updated. " I can't understand how to actually change it. SAVEDATA is located in < 1 > it is because I wanted to also give somehow a unique ID to each player (there is a system of connection), and when you connect, it checks your ID and continues the game where you left off.

If you use the XML, as I've shown, you can use the following to load and change the attribute of retail:

Load it

var urlLoader:URLLoader = new URLLoader();

urlLoader.addEventListener (Event.COMPLETE, f);

urlLoader.load (new URLRequest ("test2.xml"));

var xml;

function f(e:Event):void {}

XML = XML (e.target.data);

}

editing xml: (for example to change player with id = '3' for pos = '7', use editXMLF (3.7);)

you don't need to change any code above or below except the parameters you pass when you call editXMLF

function editXMLF(playerID:int,_newPOS:int):void {}

XML. Player. (@id == playerID.toString ()). SaveData.@POS = newPOS;

}

Tags: Adobe Animate

Similar Questions

  • How to extract data using the xml data type

    Hello
    I tried the following example using the xml data type, but not the desired output.
    could you please correct the query in order to obtain the necessary
    CREATE TABLE TEST.EMP_DETAIL
(
  EMPNO       NUMBER,
  ENAME       VARCHAR2(32 BYTE),
  EMPDETAILS  SYS.XMLTYPE
)
    Insert into EMP_DETAIL
   (EMPNO, ENAME, EMPDETAILS)
 Values
   (7, 'Martin', XMLTYPE('<Dept>
  <Emp Empid="1">
    <EmpName>Kevin</EmpName>
    <Empno>50</Empno>
    <DOJ>20092008</DOJ>
    <Grade>E3</Grade>
    <Sal>3000</Sal>
  </Emp>
  <Emp Empid="2">
    <EmpName>Coster</EmpName>
    <Empno>60</Empno>
    <DOJ>01092008</DOJ>
    <Grade>E1</Grade>
    <Sal>1000</Sal>
  </Emp>
  <Emp Empid="3">
    <EmpName>Samuel</EmpName>
    <Empno>70</Empno>
    <DOJ>10052008</DOJ>
    <Grade>E2</Grade>
    <Sal>2530</Sal>
  </Emp>
  <Emp Empid="4">
    <EmpName>Dev</EmpName>
    <Empno>80</Empno>
    <DOJ>10032007</DOJ>
    <Grade>E2</Grade>
    <Sal>1200</Sal>
  </Emp>
</Dept>
'));
    I need to get the record for Empid = '2'
    Then tried the following query with no expected o/p
    SELECT a.empno,a.ename,a.empdetails.extract('//Dept/Emp/EmpName/text()').getStringVal() AS "EmpNAME",
     a.empdetails.extract('//Dept/Emp/Empno/text()').getStringVal() AS "EMPNumber",
      a.empdetails.extract('//Dept/Emp/DOJ/text()').getStringVal() AS "DOJ",
      a.empdetails.extract('//Dept/Emp/Grade/text()').getStringVal() AS "Grade",
      a.empdetails.extract('//Dept/Emp/Sal/text()').getStringVal() AS "Salary",
      a.empdetails.extract('//Dept/Emp[@Empid="2"]').getStringVal() AS "ID",
      a.empdetails.extract('//Dept/Emp[EmpName="Coster"]').getStringVal() AS "CHK"
     FROM emp_detail a 
     where empno=7  
           AND a.empdetails.existsNode('//Dept/Emp[@Empid="2"]') =1
    Thank you...

    Karthick_Arp wrote:
    I'm not very good at that... But if your XML code should not be more like this

    SQL> Insert into EMP_DETAIL
2     (EMPNO, ENAME, EMPDETAILS)
3   Values
4     (7, 'Martin', XMLTYPE('
5    
6      1
7      Kevin
8      50
9      20092008
10      E3
11      3000
12    
.. cut ..

    Why? It is perfectly valid to data as attributes rather than elements and also quite common for key values.

  • Update the XML data store

    Hello experts,

    I've created an interface when an xml file is reversed in the form of a source data store. Xml data are pumped into a target of oracle db. All this goes well.

    I'm creating a scenario where I get an xml file from a ftp server on a daily basis (with agent). This new xml file has the same structure as that already used in the interface. The question is: How can I update the data in the xml data store?

    I tried to replace the original xml file, but it does not work and cdc does not seem to apply here, I searched for quite a while now.

    Thank you very much!

    Yves

    Hello

    See if that helps
    XML for the interface Oracle even insert County regardless of input XML file

    Thank you
    Fati

  • How can I find and replace the xml tags?

    Hi, I am using xml in my workflow and want to be able to remove some tags if they contained particular text.

    Here is an example of the xml struct...

    < Entry >

    < name > DEFAULT < / name >

    < such > default < / such >

    DEFAULT < address > < / address >

    < / Entry >

    I use this initial structure to define paragraph styles to follow when you import the xml data.

    This leaves DEFAULT in place everywhere where an entry is not any content of this field.

    I want to be able to import my XML and then run a script that deletes tags that include by DEFAULT, - I need to the xml tag to remove not only the text, if I do a normal find and replace will remove only the text not the tags that is causing problems with style. I also want to remove the end of para/return (^ p) that I placed at the end of the line. So it would be the same opening editor mode and removing content, tags + hard back in there, but I want to automate the process...

    So I think that's what I'm looking for in each case

    "< name > DEFAULT < / name > ^ p.

    and I want to replace it with nothing.

    Is this possible in a script (ideally javascript)?

    I have a little knowledge of javascript, but don't know how to search for and target this kind of string in indesign...

    using indesign cs5

    Thank you very much

    Hello

    Script should do it in two steps:

    1 find all occurrences of that is ' > by DEFAULT.<>

    2 delete the whole paragraph which is a found_text container.

    For example, in this way - JS - (a textFrame filled your text must be selected):

    var mStory = app.selection[0].parentStory;
app.findTextPreferences =  null;
app.findTextPreferences.findWhat = ">DEFAULT<";
var myF = mStory.findText();
var count = myF.length;
while (count--)
     myF[count].paragraphs[0].remove();

    Rgds

  • How to write the xml data to a file

    Hi all

    We have a requirement of writing, the xml data in a file in the data directory in the server. Generate xml data using the SQL below.

    SELECT XMLELEMENT ("LINE",
    XMLELEMENT ('CELL', xmlattributes (LIKE 'column name', ' EBIZCZMDL_01'), inventory_item_id).
    XMLELEMENT ('CELL', xmlattributes (AS 'Name of COLUMN', ' EBIZFFMT_01'), attribute29).
    XMLELEMENT ('CELL', xmlattributes ("COMMON" AS "Name of COLUMN"), inventory_item_id |) '' || attribute29 | "ITM")
    "XMLDATA" AS "PRODUCE")
    OF apps.mtl_system_items_b

    When we try to write this query data in a file using UTL_FILE.put_line, the script gives error
    PLS-00306: wrong number or types of arguments in the call to "PUT_LINE '.

    If anyone can help pls...

    Thanks in advance

    The call to dbms_xslprocessor.clob2file is in the cursor for the specific SQL loop.

    This is obviously the problem.
    The file is replaced with each iteration.

    Do not use a cursor at all.

    See the example below, it should be close to your needs:

    DECLARE

   l_file_name      VARCHAR2 (30);
   l_file_path      VARCHAR2 (200);

   l_xmldoc         CLOB;

BEGIN

   l_file_path := '/usr/tmp';
   l_file_name := 'TEST_XREF4.xml';

   SELECT XMLElement("xref", xmlattributes('http://xmlns.oracle.com/xref' as "xmlns"),
            XMLElement("table",
              XMLElement("columns",
                XMLElement("column", xmlattributes('EBIZFFMT_01' as "name"))
              , XMLElement("column", xmlattributes('COMMON' as "name"))
              , XMLElement("column", xmlattributes('EBIZQOT_01' as "name"))
              , XMLElement("column", xmlattributes('EBIZCZMDL_01' as "name"))
              , XMLElement("column", xmlattributes('EBIZCZGOLD_01' as "name"))
              ),
              XMLElement("rows",
                XMLAgg(
                  XMLElement("row",
                    XMLElement("cell", xmlattributes('EBIZCZMDL_01' AS "colName"), inventory_item_id)
                  , XMLElement("cell", xmlattributes('EBIZFFMT_01' AS "colName"), attribute29)
                  , XMLElement("cell", xmlattributes('COMMON' AS "colName"), inventory_item_id || '' || attribute29 || 'ITM')
                  )
                )
              )
            )
          ).getClobVal()
   INTO l_xmldoc
   FROM apps.mtl_system_items_b
   WHERE attribute29 IS NOT NULL
   ;

   dbms_xslprocessor.clob2file(l_xmldoc, l_file_path, l_file_name, nls_charset_id('UTF8'));

END;
/

    BTW, the directory in DBMS_XSLPROCESSOR parameter. CLOB2FILE must be an Oracle Directory object, not a literal path.

  • Error occurred when the XML data is inserted in the table.

    Hello

    I'm trying to load the xml data into the table of following code.but get below error

    Error on line 1
    ORA-31011: XML parsing failed
    ORA-19202: an error has occurred in the processing of XML
    LPX-00222: error received from the SAX callback function
    ORA-06512: at "SYS." DBMS_XMLSTORE', line 78
    ORA-06512: at line 21

    DECLARE
 
  xmldoc   clob;
  insCtx   DBMS_XMLStore.ctxType;
  dname    varchar2(20) := 'MDIR';
  rows  number;
 
 BEGIN
 
    xmldoc := dbms_xslprocessor.read2clob(dname, 'try_xm3.xml');
    insCtx := DBMS_XMLStore.newContext('try1');
 dbms_output.put_line('1');
    DBMS_XMLStore.setRowTag(insCtx, 'cajas');
 rows := DBMS_XMLStore.insertXML(insCtx, xmlDoc);
 
 commit;
  dbms_output.put_line('INSERT DONE '||TO_CHAR(rows));
 
  DBMS_XMLStore.closeContext(insCtx);
 
 END;
    <?xml version="1.0" encoding="utf-8"?>
<cajas xmlns="PBcion.Caja" fec="2011-03-02T14:20:14" codDeleg="093">
  <caj codPrev="80001223" fechaInicio="2011-03-02" fec="2011-09-02" couta="01" idPerio="1" caj="32"></caj>
 </cajas>
    can you please look at this?
    I m using oracle 10g 
    insert
  into try1
  with t as (
             select xmltype('') x from dual
            )
  select  codPrev,
          fechaInicio,
          fec,
          couta,
          idPerio,
          caj
    from  t,
          xmltable(
                   '/'
                   passing x
                   columns
                     codPrev number path '@codPrev',
                     fechaInicio varchar2(25) path '@fechaInicio',
                     fec varchar2(25) path '@fec',
                     couta number path '@couta',
                     idPerio number path '@idPerio',
                     caj number path '@caj'
                  )
/

1 row created.

SQL>  select  *
  2    from  try1
  3  /

   CODPREV FECHAINICIO               FEC                            COUTA    IDPERIO        CAJ
---------- ------------------------- ------------------------- ---------- ---------- ----------
  80001223 2011-03-02                2011-09-02                         1          1         32

SQL>

    SY.

  • R12 payment process Request Status Report add additional columns to the XML data.

    In 11i, we had modified the preliminary report of payment to include additional columns (distributions of invoice). R12, this report is obsolete and Oracle introduced a new report 'Payment process Request Status Report'. This query uses BI Publisher to generate the release of the final report. I can't edit the template for the output XML to the report has not
    contains data for distribution invoice account. We need to know how we can modify the XML data to include additional columns.

    For the disbursement of funds (payment instructions file) process, Oracle provides extensibility IBY_FD_EXTRACT_EXT_PUB package to build the custom XML element structure that can be added to the extracted XML payment generated by the Oracle payments. Do we have something similar to this report? Are there other options available?

    Thank you

    Hello

    The same "IBY_FD_EXTRACT_EXT_PUB" package also works for the payment request process status report. Please add the logic to get the distribution data in this package, and you'll see the new XML tags in this report also.

    I hope this helps.
    Serge

  • Users of readers to save the xml data file

    Hello
    We can e-mail through the form xml data file without its extension drive. It is very good. Instead of emailing, I want just to save the xml data file in my local system.
    What is the syntax to get it? To send email, I usually create a "submit" button and the area of the submittoURL write us mailto:[email protected].
    What to write to save it on the local computer instead of emailing? I tried saveto: C:\NewFolder or fileto:C:\NewFolder. Nothing works. I think I'm missing the good syntax here.
    I know its possible by RE the pdf, you can get using savedataXML(). I want to achieve this goal without the form.
    Thanks in advance,

    Chaitanya

    The best you can do is set up a submitForm action and uses a type mailto URL. This will prompt the user to attach to an e-mail message using their email client or save it to a file.

  • Catch / know the XML data in the form of PDF (without doing send XML)

    It is possible from a PDF form using get JS / know the XML data in the current form?

    I need to get the same XML data that would be generated with the "export data" function to Adobe Professional.

    THX!

    OK now I get... You can use the command:

    xfa.datasets.data.saveXML ("pretty")

    Paul

  • Pdf forms can always send the xml data (even if the pdf does not extend)?

    Hello

    My problem is the following. I have Acrobat Professional license, so I can create pdf forms.

    I added a shipment through the mail button to my form and sent to the end user, who had only the acrobat reader software. He was able to complete the form and send its data via the e-mail button, and I got an xml with the data file.

    Because I had not extended the document, I suppose it's always possible, so I can always receive the xml data in completed forms, I can't?

    Then also extended the professional Acrobat document (Tools-> enable usage rights in Adobe Reader), because I need the final customer, be able to save the form. Now, I just sent this document extended by mail (do not use the tool Distribuite form in Acrobat), the user has clicked the button and again once I received my xml.

    Now, I want to back my document to a maximum of 500 customers, I have no limitation?

    I quote acrobat licenze agreement:

    14.13.3 for any unique Document extended, you may only either (a) deploy this Document extended to an unlimited number of recipients unique but shall not extract information from more than five hundred 500 unique of this extensive Document instances or any representation of a paper copy of this Document extended with fields of form [...]

    Since the function I described before (the xml data emailing) is granted even if the document is not extended, I think that this limitation does not apply to me. Am I wrong?

    The limitation applies instead if I use the function 'Distribuite form' (forms-> Distribuite forms...) in acrobat professional. If I use this feature for distribuite the form, an email is automatically sent by acrobat (and not manually by me, as before) and pdf dataset is created. When the end customer cliks button, a pdf file (and not an xml) with the data are sent to me. If I double click on acrobat fills the dataset that was created with the data. It is the extraction of information to which the license relates?

    This is my conclusion: a pdf form can still send data xml by the player, and if I Express with acrobat, the end-user can also record. The only restriction is to distribute the form using "Distribuite form", but if I use it not I have no limitation on the number of times where ever I can get xml data.

    Can anyone confirm that my conclusion is just?

    Thank you very much

    Giuseppe Romeo

    You can try the link "contact us".

  • loading the XML data in password protected URLs

    Using Flash Professional 8...

    I have an application that loads the XML data in remote servers.

    It works fine, except that the company provide me with the data decided to protect their files. It seems they use IIS or .htaccess protection of password for the style.

    I have a valid user name and password, but I do not know how to integrate those when calling the URL to authenticate.

    I think I need to use loadVars objects, but I've not been able to find examples where people use this method for this style of security. I see most of the examples deal with submit a name of user and password on a URL and then receive a response.
    The security of this type does not follow this pattern. The URL is blocked unless a name of user and password is entered in a box even before see pages.

    LoadVars to use for this?

    If Yes, are there an example or something that I can see?

    If this is not the case, how Flash authenticates this style of security?

    This seems like a fairly standard issue, and I am puzzled that I can't yet find other examples. Am I stupid?

    Thank you
    Joe

    Maybe it helps.
    http://www.martijndevisser.com/blog/article/using-HTTP-authorization-headers

  • ODI can load data into the planning and REPLACE the existing data?

    Hello
    ODI (9.3.1.1) can load data into the planning and REPLACE the existing data?
    Currently of our ODI by "ADD" load to existing data data - so that is I accidentally run the load twice, it would be double planning numbers. I don't know how to do it to REPLACE so that running more than twice has no effect.

    With the help of the essbase adapter you would use a rule of load, in the State of charge, you can set whether to replace or add to existing values. It is not difficult to pass.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Select the XML data

    Dear all,

    Please find a list of the steps done to read the date of conversion of currency by the last final query, that I can be able to obtain the release of the name of the Bank as the Central Bank, but impossible to extract the time, rates, currency of the XML data.

    Please tell us how to solve the problem.

    CREATE TABLE url_tab

    (

    URL_NAME VARCHAR2 (100),

    SYS URL. URIType

    );

    INSERT INTO url_tab VALUES

    ("This is a test URL',

    sys . UriFactory.getUri ("http://www.ecb.europa.eu/stats/eurofxref/eurofxref-daily.xml" "")

    );

    INSERT into xml_data_tab select sys.xmltype.createXML (u.url.getClob ()) in u url_tab;

    Select Bank_name, xt1.* from

    XMLTable (XMLNamespaces (default 'http://www.ecb.int/vocabulary/2002-08-01/eurofxref', ))

                                   ' ( http://www.GESMES.org/XML/2002-08-01 ' as "gesmes"),

    ' / / gesmes:Envelope'

    FROM (select * from xml_data_tab)

    columns

    Path of varchar2 (100) Bank_name ' / gesmes:Envelope / gesmes:Sender / gesmes:name',

    outer join left perv_t XMLTYPE PATH "Cube/Cube")

    XMLTable (XMLNamespaces ('http://www.gesmes.org/xml/2002-08-01' as "gesmes"), )

    "/ / Cube/Cube."

    FROM (select * from xml_data_tab)

    COLUMNS

    path of varchar2 (100) of rate_date "@time"

    path varchar2 (100) coin "@currency."

    path of rate varchar2 (100) '@rate') xt1 on 1 = 1

    its work for me

    SQL > with xml_data_tab like)

    2. Select XMLType)

    3'http://www.gesmes.org/xml/2002-08-01' xmlns ="http://www.ecb.int/vocabulary/2002-08-01/eurofxref" >. "

    4 reference rate

    5

    6 the European Central Bank

    7

    8

    9

    10

    11

    12

    13

    14

    15

    16

    17

    18

    19

    20

    21

    22

    23

    24

    25

    26

    27

    28

    29

    30

    31

    32

    33

    34

    35

    36

    37

    38

    39

    40

    41

    42

    43 ') as the double DATA

    44)

    45 select Bank_name, xt1. RATE_DATE, xt2.*

    XMLTable 46 (XMLNamespaces (default 'http://www.ecb.int/vocabulary/2002-08-01/eurofxref',

    47'http://www.gesmes.org/xml/2002-08-01"as"gesmes"),"

    48 ' / / gesmes:Envelope'

    49 FROM (select * from xml_data_tab)

    50 columns

    51 way of varchar2 (100) of Bank_name ' / gesmes:Envelope / gesmes:Sender / gesmes:name',

    52 perv_t XMLTYPE PATH 'Cube'):

    53 left outer join XMLTable (XMLNamespaces (default 'http://www.ecb.int/vocabulary/2002-08-01/eurofxref'),

    54                         '*'

    55 in PASSING (h.perv_t)

    56 COLUMNS

    path of varchar2 (100) 57 rate_date "Cube/@time."

    58 rate_data XMLType path ' / / Cube/Cube ') xt1 on 1 = 1

    59 left outer join XMLTable (XMLNamespaces (default 'http://www.ecb.int/vocabulary/2002-08-01/eurofxref'),

    60 ' / / cube/Cube/Cube. "

    61 FROM (select * from xml_data_tab)

    62 COLUMNS

    path of VARCHAR2 (3) currency 63 "@currency."

    number 64 path "@rate" rate) xt2 on 1 = 1;

    BANK_NAME RATE_DATE HEART RATE

    ---------------------------------------- ------------------------- --- ----------

    2015 Central Bank European-12-30 US $ 1.0926

    30-12-2015 of the European Central Bank JPY 131.66

    2015 Central Bank European-12-30 BGN 1.9558

    2015 Central Bank European-12-30 CZK 27.029

    30-12-2015 of the European Central Bank DKK 7.4625

    2015 Central Bank European-12-30 GBP.73799

    30-12-2015 of the European Central Bank HUF 313,15

    2015 Central Bank European-12-30 PLN 4.24

    30-12-2015 of the European Central Bank, RON 4.5296

    2015 Central Bank European-12-30 SEK 9.1878

    2015 Central Bank European-12-30 CHF 1.0814

    BANK_NAME RATE_DATE HEART RATE

    ---------------------------------------- ------------------------- --- ----------

    2015 Central Bank European-12-30 NOK 9.616

    30-12-2015 of the European Central Bank 7.637 HRK

    30-12-2015 of the European Central Bank RUB 79.754

    30-12-2015 of the European Central Bank TRY 3.1837

    2015 Central Bank European-12-30 AUD 1.499

    30-12-2015 of the European Central Bank BRL 4.259

    2015 Central Bank European-12-30 CAD 1.5171

    2015 Central Bank European-12-30 CNY 7.091

    2015 Central Bank European-12-30 HKD 8.4685

    30-12-2015 of the European Central Bank IDR 15081.33

    30-12-2015 of the European Central Bank, ILS 4.2606

    BANK_NAME RATE_DATE HEART RATE

    ---------------------------------------- ------------------------- --- ----------

    30-12-2015 of the European Central Bank INR 72.535

    30-12-2015 of the European Central Bank 1284.79 KRW

    2015 Central Bank European-12-30. 18.8867 MXN

    30-12-2015 of the European Central Bank MYR 4.6887

    2015 Central Bank European-12-30 NZD 1.5959

    30-12-2015 of the European Central Bank PHP 51.281

    30-12-2015 of the European Central Bank SGD 1.5449

    2015 Central Bank European-12-30 THB 39.334

    30-12-2015 of the European Central Bank ZAR 16.8847

    31 selected lines.

  • More simple way to complete the xml data in a drop-down list

    Hi all

    I have a dept.xml as below.

    <? XML version = "1.0" encoding = "UTF-8"? >
    < departments >
    Department < and > account < / Department >
    < departmentAdmin < / Department >
    Department < and > Security < / Department >
    < / departments >

    Can I know what is the easiest way to fill in the 'account', 'Admin' and 'Security' in a drop down list?  And how?  Can we by befriending pure?  Or has done by the script?

    Thank you all!

    CL

    To embed the XML data in the PDF file, open it in Acrobat and then:

    Forms-> manage form data-> import data.

    And you choose XML file.

    I hope this helps.

    Diego

  • How to use a variable to browse the XML data

    My chart has xml data that looks like this:

    < getViewResponse >

    < getViewResult >

    < DocumentElement >

    < ColumnChart >

    < month >

    "Dec".

    < NetIncome >

    1000

    < ColumnChart >

    etc.

    etc.

    the following lines in actionscript work perfectly for the table:

    resultxml = event.result.getViewResult.DocumentElement.ColumnChart as XMLList

    chart data provider

    _chartDP = new XMLListCollection (resultxml);

    The last argument of Colum graphic in DocumentElement.ColumnChart will change. I want to make this variable instead.

    I tried DocumentElement +'. ' + this. [ColumnChart] but I get an error telling me that the property does not exist.

    The following almost works:

    event.result.getViewWithTitlesResult.DocumentElement. *.

    but my card has a series of additional data empty.

    How can I adjust the latter to a variable?

    If the data that currently say you XMLList has a single point, just cast to XML with XML (myXMLLIST) or "myXMLLIST in Xml format.

    If this post answers your question or assistance, please mark it as such.

Maybe you are looking for

  • Could not find ExcelExamples.llb in LV2013

    Hi all! I have an old VI I'm opening. Miss me the "LabVIEW" 2013/examples/comm folder and the ExcelExamples.llb file, which should reside. My questions are; What I need to load a toolkit to get this file, and what tools do I need? If this file has co

  • is it possible to use external memory to increase the performance of my computer?

    I have a slow xp and each program/app/files in an external drive.But I want to know if I can improve the performance of my control memory left him in the external drive.

  • Cisco 2112 and Apple TV Airplay wireless LAN Controller

    Hi all I'm having a problem with the help of iTunes, iPhones, and iPads on our wireless network. We have the WLC 2112 and 10 1142N WAP. If I do a network scan, I can see the Apple TV and port 5353 is open, which is Apple's morning service.  However,

  • FlowFieldManager not 'compatible' with the text fields?

    Hi all. I'm making an icon to follow the end of a given text. A bit like the phoneLog done with the green phone icon next any number that you enter. I tried the substitution of the DrawText, but unfortunately after conditioning to the new line I don'

  • IOS compiler error: phonegap-plugin-csdk-client-auth

    HelloI try to use the creative image SDK editor in my iOS application that has a dependency on the plug-in phonegap-plugin-csdk-client-auth. When I get this plugin, I get the following generation problem:Cannot install "phonegap-plugin-csdk-client-au