Update the XML data store

Similar Questions

• Updating the XML data

  We know how or if you can update or insert new data in an xml file in Flash AS3?
  
  An example would be a person complete and submit a form, then the input is sent to the xml file to create or update the nodes in the xml file.
  
  Thanks in advance.

  You can do that directly flash player.

  You can do this via a script server-side, e.g. a script using php that processes the application of flash, but often the data in this type of scenario would be stored in a database instead of an xml file (however you use php to update an xml file is quite possible too)

• After the migration of ESXi 4.1 to 5.0 Update 1, ESXi containing the missing data store

  I intend to upgrade to an ESXi 4.1 production host, but I want to run through an upgrade of test on a separate machine. I created this using a virtual machine and the upgrade went well. However, now when I insert my vSphere client, I don't see the data store that contains data to my VM.

  Before migrating to 5, I had 2 drives, a disk of 4 GB for ESXi, and a 40 GB drive for the data of the VM installation. I could see and access times stores via the 4.1 vSphere client, but once the upgrade only the VM data store is available. Is there a reason that this is the case?

  I've updated but has not changed the partitions of data store. I have selected to migrate and keep the VMFS store, which was VMFS-3. I also tried to add the store drive 4 GB with the customer data, but an error message: "the selected disk already has a vmfs data store or the host cannot perform a conversion of partition table.
  Select another disk.

  I found this article on error message: http://KB.VMware.com/kb/2000454 , but I never actually removed from the data store. With the help of the 5.0 ESXi update I can see the VMFS store on 4 GB drive, which should have about 3.2 GB of available disk space (the rest being used by the hypervisor).

  Recommended someone else try esxconfig-volume - the list, and then use the output to a mount (http://communities.vmware.com/message/1666168#1666168), but the list command had no output at all.

  I searched through the forums and Google but you saw nothing.

  ESXi 5 has a different architecture, and I think that the problem is the size of the disk (too small) and the partition of scratch required.

  Have a look here:

  • http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-50-installation-Setup-Guide.PDF (page 153)
  • http://communities.VMware.com/message/1848769
  • http://KB.VMware.com/kb/1033696
  • http://blogs.VMware.com/ESXi/2011/03/OPS-changes-part-5-scratch-partition.html

  HTH

  Sam

• Move-VM error: VM must be managed by the same VI servers as the destination data store

  I work with 2 ESXi servers and a single vCenter server with vSphere 6.0 Update 1 b; and PowerCLI 6.0 Release 2

  I have an a datacenter, cluster, vCenter and a vDS.  I need to pass the vCenter data store to another and get the error message:

  "Move-VM VM you are moving should be handled by the same server of VI as the destination container and the data store.

  Code looks like the following:

  $vctObj = to connect-viserver $vctIPaddress

  $esx1Obj = to connect-viserver $esx1IPaddress

  $esx2Obj = to connect-viserver $esx2IPaddress

  $vmObj = get-vm-name $vmname - Server $vctObj

  $destDSobj = get-datastore-name $destDSname

  Move-vm - vm $vmObj Datastore - $destDSobj - 'End' DiskStorageFormat

  I can migrate successfully from the virtual machine to vCenter data store through the VI Client, but PowerCLI left me speechless.

  Maureen

  Try to use the Server parameter on the Get-Datastore line

• ESXI 5.1 "the disc is not thin-provisioned" after copying to the new data store vmdk

  I wanted to create an external backup as a 2nd VM ready-to-run on the 2nd data store.

  I've removed all snapshots, stop the machine virtual and exported the OVF file to a computer, adjusted to the size of the original virtual machine starts in Gparted to update the partition and restart. All very well.

  I then tried to deploy the OVF in the data store alternative (235GB slim, thickness according to the deployment of 250 Wizard). I tried both thick and thin but the error message "cannot deploy the OVF. The operation was cancelled by the user.

  I then manually downloaded the VMDK & OVF file to the 2nd data store and tried to inflate but then received the message "a specified parameter was not correct. The disc isn't thin provisioned. ».

  It seems I have dealing with the same thing, as this is the document here (http://pubs.vmware.com/Release_Notes/en/vsphere/55/vsphere-vcenter-server-55u3-release-notes.html).  However, I have no idea what to do now... and I'm worried because it seems that my backup plan may not work if I can't restore an OVF/VMDK from a disk of visas.

  The solution to the first problem here: https://communities.vmware.com/message/2172950#2172950 that solved my problem 2nd too.

• ESXi 5.0 servers don't recognize that same NFS share to the same data store

  I have a setup of vSphere 5.0 running VMware Workstation 8.  I have two ESXi servers that are accumulating the same NFS share (with the same IP address and the same directory path), but for some reason, they don't recognize it as the same data store.  I deleted and added to the data store again and checked that I am getting the same way on both nodes.  However, vSphere don't let me use the same name when I ride sharing NFS as a data store on the second node. vSphere changes the name of "NFSdatastore" to "NFSdatastore (1)" and will not let me change, say that the name already exists.

  The NFS file server is a VM of 2.99 OpenFiler, which IP 192.168.0.100 (and is in DNS as "openfiler1").  The path is "/ mnt/vsphere/vcs/datastore.

  The NFS mount works great as a data store on the two servers ESXi, except for the fact that vSphere sees two data stores.  I have a Red Hat VM running on each of them, and when I browse the data of each ESXi Server store, I can definitely see two configs VM, as well as a few ISO images that I put on the NFS share.  However, I can't vMotion as he complains about not being able to access the configuration file and the file virtual disk (vmdk) of the other node.

  On the OpenFiler, the directory/mnt/vsphere/vcs/datastore is the property of "ofguest" in the "ofguest" group, and the permissions are "drwxrwsrwx +".  All files under the directory are also held by "ofguest" in the group "ofguest".  Vmx files have permissions "rwxr-xr-x + ', and the vmdk files have permissions ' rw +-

  I did a lot of Google search, read best practices, etc.  Any help is appreciated.

  UPDATE: he Figured out - leakage / on one of the paths of NFS mounting.  DOH!

  Maybe this can help you:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005930

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005057

  Concerning

• How can I update the expiration date on my credit card account?

  How can I update the expiration date on my credit card account?

  How can I update the expiration date on my credit card account?

  Go to your Bank and get a new card.

• Planted in the middle of the intallation: "could not update the registry data.

  My hard drive was a hardware malfunction and had to be replaced altogether. I just got my new hard drive, and after fit, he tried to install vista Home premium 32B, that came with my dell inspiron 530 computer. About 10 minutes after the installation a message announcing that "windows could not update the registry data" and "installation has been cancelled. This was repeated several times. Any ideas why and how to solve?
  Thank you.

  HI -.
  Other people who have had this problem report that choose NOT to do the updates during installation allows you to install finish. They are then installing updates once the installation is complete. You see an option to install no updatesa as part of the installation? Barb winter
  Program Manager of Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Good way to use the concurrent data store

  Hello

  I'm developing a multithreaded C++ application that uses the C++ of Berkeley DB Library.

  In my case, I have several databases that I composed in a wooded area. It is important for me to use an environment because I need control over the cachesize parameter.

  I don't need no guarantee of transaction and have for most of the readings, so I decided to use the "simultaneous database.

  I first pre-fill all databases with a number of entries (configuration single-threaded phase) and then work on it at the same time (for most readings, but also insertions and deletions).

  I tried all kinds of different configurations, but I can't work without specifying DB_THREAD as a flag of the environment.

  I don't want to because then access all handles is synchronized sequentially according to the documentation:

  "... Note that the activation of this indicator will serialize calls to DB using the handle between the threads. If

  simultaneous scaling is important for your application, we recommend handles separate for each thread opening

  (and do not specify this indicator), rather than share handles between threads. "

  (Berkeley DB QAnywhere C++)

  So I tried to open the environment with the following indicators:

  DB_CREATE | DB_PRIVATE | DB_INIT_MPOOL | DB_INIT_CDB

  All data in this environment handles are open only with the DB_CREATE flag.

  So, since my understanding this same basic access handles need to be synchronized, I opened separate handles foreach database for each thread (opening the handles is still single-threaded).

  In my first approach, I have only made use of the object of global environment. Which does not work and gives the following during operations error message:

  DB_LOCK-> lock_put: Lock is no longer valid

  So I thought, since the same handle global env is passed to all handles separate DB, it is perhaps a race condition critical on the handful of approx.

  So in my next test, I opened also handles separate EPS in each thread (and db handles owned each).

  That does not produce an error in db, but now it seems that each thread sees its own version of the databases (I call it stat early in the life of each thread and he sees all of the empty dbs).

  What is the right way to use the concurrent data store? Each thread should really open his own set of db handles? What about the number of open handles env?

  PS: Without specifying that the DB_PRIVATE flag seems to do the job, but for performance reasons, I want all operations to perform in the cache and do not specify product DB_PRIVATE average of several writes to the disk for my scenario.

  Thanks a lot for your help.

  CD (simultaneous database) allows a single editor with multiple drives, access to the db at a given point in time.    The handle for the writer doesn't have to be shared with readers.   If you share the DB handle then calls are synchronized, but if each thread has its own handle DB then this is not the case.     Since you have an environment, DB_THREAD must be at the level of the environment.   This will allow the sharing of the environment handle.     This type of error "DB_LOCK-> lock_put: Lock is no longer valid" you can provide us your code so we can take a look.   Also what BDB version are you using?

• Select the XML data

  Dear all,

  Please find a list of the steps done to read the date of conversion of currency by the last final query, that I can be able to obtain the release of the name of the Bank as the Central Bank, but impossible to extract the time, rates, currency of the XML data.

  Please tell us how to solve the problem.

  CREATE TABLE url_tab

  (

  URL_NAME VARCHAR2 (100),

  SYS URL. URIType

  );

  INSERT INTO url_tab VALUES

  ("This is a test URL',

  sys . UriFactory.getUri ("http://www.ecb.europa.eu/stats/eurofxref/eurofxref-daily.xml" "")

  );

  INSERT into xml_data_tab select sys.xmltype.createXML (u.url.getClob ()) in u url_tab;

  Select Bank_name, xt1.* from

  XMLTable (XMLNamespaces (default 'http://www.ecb.int/vocabulary/2002-08-01/eurofxref', ))

                                 ' ( http://www.GESMES.org/XML/2002-08-01 ' as "gesmes"),

  ' / / gesmes:Envelope'

  FROM (select * from xml_data_tab)

  columns

  Path of varchar2 (100) Bank_name ' / gesmes:Envelope / gesmes:Sender / gesmes:name',

  outer join left perv_t XMLTYPE PATH "Cube/Cube")

  XMLTable (XMLNamespaces ('http://www.gesmes.org/xml/2002-08-01' as "gesmes"), )

  "/ / Cube/Cube."

  FROM (select * from xml_data_tab)

  COLUMNS

  path of varchar2 (100) of rate_date "@time"

  path varchar2 (100) coin "@currency."

  path of rate varchar2 (100) '@rate') xt1 on 1 = 1

  its work for me

  SQL > with xml_data_tab like)

  2. Select XMLType)

  3'http://www.gesmes.org/xml/2002-08-01' xmlns ="http://www.ecb.int/vocabulary/2002-08-01/eurofxref" >. "

  4 reference rate

  5

  6 the European Central Bank

  7

  8

  9

  10

  11

  12

  13

  14

  15

  16

  17

  18

  19

  20

  21

  22

  23

  24

  25

  26

  27

  28

  29

  30

  31

  32

  33

  34

  35

  36

  37

  38

  39

  40

  41

  42

  43 ') as the double DATA

  44)

  45 select Bank_name, xt1. RATE_DATE, xt2.*

  XMLTable 46 (XMLNamespaces (default 'http://www.ecb.int/vocabulary/2002-08-01/eurofxref',

  47'http://www.gesmes.org/xml/2002-08-01"as"gesmes"),"

  48 ' / / gesmes:Envelope'

  49 FROM (select * from xml_data_tab)

  50 columns

  51 way of varchar2 (100) of Bank_name ' / gesmes:Envelope / gesmes:Sender / gesmes:name',

  52 perv_t XMLTYPE PATH 'Cube'):

  53 left outer join XMLTable (XMLNamespaces (default 'http://www.ecb.int/vocabulary/2002-08-01/eurofxref'),

  54                         '*'

  55 in PASSING (h.perv_t)

  56 COLUMNS

  path of varchar2 (100) 57 rate_date "Cube/@time."

  58 rate_data XMLType path ' / / Cube/Cube ') xt1 on 1 = 1

  59 left outer join XMLTable (XMLNamespaces (default 'http://www.ecb.int/vocabulary/2002-08-01/eurofxref'),

  60 ' / / cube/Cube/Cube. "

  61 FROM (select * from xml_data_tab)

  62 COLUMNS

  path of VARCHAR2 (3) currency 63 "@currency."

  number 64 path "@rate" rate) xt2 on 1 = 1;

  BANK_NAME RATE_DATE HEART RATE

  ---------------------------------------- ------------------------- --- ----------

  2015 Central Bank European-12-30 US $ 1.0926

  30-12-2015 of the European Central Bank JPY 131.66

  2015 Central Bank European-12-30 BGN 1.9558

  2015 Central Bank European-12-30 CZK 27.029

  30-12-2015 of the European Central Bank DKK 7.4625

  2015 Central Bank European-12-30 GBP.73799

  30-12-2015 of the European Central Bank HUF 313,15

  2015 Central Bank European-12-30 PLN 4.24

  30-12-2015 of the European Central Bank, RON 4.5296

  2015 Central Bank European-12-30 SEK 9.1878

  2015 Central Bank European-12-30 CHF 1.0814

  BANK_NAME RATE_DATE HEART RATE

  ---------------------------------------- ------------------------- --- ----------

  2015 Central Bank European-12-30 NOK 9.616

  30-12-2015 of the European Central Bank 7.637 HRK

  30-12-2015 of the European Central Bank RUB 79.754

  30-12-2015 of the European Central Bank TRY 3.1837

  2015 Central Bank European-12-30 AUD 1.499

  30-12-2015 of the European Central Bank BRL 4.259

  2015 Central Bank European-12-30 CAD 1.5171

  2015 Central Bank European-12-30 CNY 7.091

  2015 Central Bank European-12-30 HKD 8.4685

  30-12-2015 of the European Central Bank IDR 15081.33

  30-12-2015 of the European Central Bank, ILS 4.2606

  BANK_NAME RATE_DATE HEART RATE

  ---------------------------------------- ------------------------- --- ----------

  30-12-2015 of the European Central Bank INR 72.535

  30-12-2015 of the European Central Bank 1284.79 KRW

  2015 Central Bank European-12-30. 18.8867 MXN

  30-12-2015 of the European Central Bank MYR 4.6887

  2015 Central Bank European-12-30 NZD 1.5959

  30-12-2015 of the European Central Bank PHP 51.281

  30-12-2015 of the European Central Bank SGD 1.5449

  2015 Central Bank European-12-30 THB 39.334

  30-12-2015 of the European Central Bank ZAR 16.8847

  31 selected lines.

• Need to create a structure for the target data store?

  Hi Experts,

  If I create a structure for the target data store, and then load the data from source to target works fine. If I make mistakes.

  Is necessary to create a structure for target?

  Please help me...

  Thanks in advance.

  A.Kavya.

  I found the answer. No need to create the structure for target temporary data store. and we need to create the structure for the permanent target data store.

• remove the Cluster data store data store

  I have an infrastructure with vCenter and ESXi 4 5.5 I have a data cluster store in SAN with 8 Mon, I need to remove 3 Lun (to be used for other purposes) what is the appropriate procedure

  to remove the Lun (end then to destroy)? Thank you

  Do you want the LUN to use for purpose of non-vSphere? If so, you can just storage vMotion virtual machines since associated LUN data warehouses that you want to decommission (or simply putting the data store in maintenance mode, in this way, that the virtual machines will automatically be migrated). Cleaning after the data store, move the data store from the cluster data store, and then delete the VMware environment data store as described here: best practices: how to properly remove a unit number logic of a host ESX - VMware vSphere Blog - VMware Blogs

• Extremely high latency during the migration of the local data store to data store shared.

  Hi guys I hope you help me. Sorry for my English btw, I'm not native.

  Let's start!

  I have:

  1 vCenter
  1 host
  1 Distributed Switch (with a pg for managing network/IPstorage the esxi)
  1 standard switch (empty)
  1 FreeNAS to provide iSCSI LUNS
  1 Microsoft to provide iSCSI LUNS

  When I try to migrate virtual machines between the warehouses of shared data or data shared at local store, all right. The problem has become when I try to migrate virtual machines from the local to the shared data store. All data stores down (all paths down) and back up and I get this error:

  "Error caused by the /vmfs/volumes/volumenID/VMDirectory/Disk.vmdk file.

  
  When I try to migrate virtual machines from the local to the FreeNAS iSCSI data store it fails immediately.
  When I do the same local Microsoft iSCSI datastore that it takes a time loooooong to migrate the virtual computer, give it to me even all the paths downwards and uplinks down error but not lacking in migration.

  I'll give you some screenshots to see the errors.

  Thank you very much!

  EDIT: I have extremely high latency notice when I try to migrate from the premises of warehouses of shared data. average 2000ms with peaks of 50,000 (see my response below for more information)

  Finally, I found the solution! The problem is that I have been using E1000E vmnic instead of vmxnet3. I have configured an adapter vmxnet3 and boom! 20 ms in all migration!

  Thank you to all for help, especially Nick_Andreev !

• Expand the Local data store

  Hello

  I have an ESX 4.1 with only a data store local (RAID5) on virtual machines on a DELL Server

  I want to enlarge the data store, I don't have enough free space to create multiple virtual machines.

  To do:

  -Install a new hard drive (with vmware powered)

  -Add the new hardisk to Raid5 with DELL Open manage

  -wait finally extend raid 5

  -Power Off Vmware machines?  or continue started?

  -Develop with local Vshpere the data store vmware (what time must expand?)

  I want to know if I can do an extension with the new space unpartitioned on local existing datastore without losing my virtual machines? I have only the local data store with esxi when I develop the esxi continue to work?

  Can someone help me?

  Concerning

  Yes, it's quite OK.

  If this solved your problem, please mark it as answered.

  See you soon,.

  Adil Arif

• Deployment uses the local data store

  The deployment of VIO works without problem, but one of the virtual machines (VIO-DB-0) is now in a local data store. I never chose this data store in the installation process.

  Is it possible to manually move the virtual machine? Is it possible to define the data store used for the management of virtual machines somewhere?

  Concerning

  Daniel

  Hi Daniel,.

  Take a look at VMware integrated OpenStack 1.0 Release Notes:

  • Installer gives priority to local storage by default
    When you set up the data for the database stores three virtual machines, VMware OpenStack Setup integrated automatically gives priority to a local storage to improve IO performance. For resilience, users might prefer a shared storage, but the installer does not clear how to change this setting.
  • Workaround: Before completing the installation process, the installer of VMware OpenStack integrated allows you to examine and change the configuration. You can use this opportunity to change the configuration of the data to the database store three virtual machines.

  If you have already installed VIO, AFAIR you should be able to manually move between data warehouses as long as you do not change VM itself.

  Note that there is rule anti-affinite, so you may not be able to move that VM in the same data store when no other VIO - DB resides.

  Another note is that if you turn off VIO-DB-0, mysql service will not appear automatically. you have to turn on manually by running "service mysql start" on the node itself, or run 'vioconfig start' of the SGD server.

  Best regards

  Karol