Replacement of USB connection

Similar Questions

• How to control the TTi QL564P Power Supply with USB connection?

  Hello

  When I connect the TTi QL564P power supply via the USB port I see not on MAX (peripherals and interfaces) the virtual serial connection. With GPIB, everything works great!

  I already downloaded the latest drivers on the site of the IFG.

  And I created a simple VI like this:

  OPEN--> VISA VISA WRITE ('V1?") --> DELAY (0.1 s)--> READING of VISA--> VISA CLOSE

  (works via GPIB, does not work via USB)

  VISA OPEN I have the name of resource VISA only the LPT1 and COM1 ports available... so where is the USB port (this virtual serial port, case)?

  VISA GPIB resource name is the ALIAS that I set on MAX...

  Thanks for the help

  OK, the solution was... on the front panel of the power supply, I replace the USB bus (I had default GPIB )

• HP psc 750xi - USB connection. for windows7 professional 32-bit. driver does not work.

  HP psc 750xi - USB connection.  New windows7 professional 32-bit.  I downloaded the proposed driver from hp.com but ' the selected printer is not currently supported by this wizard ".  Help

  Hi flojo9,

  Follow the steps below to load the driver for Win 7.

  1. open devices and printer

  2. click on add a printer

  3. replace the USB port and then click Next

  4. click on Windows Update (step 1)

  5. once the update is complete, you will need to select the PSC 750xi driver in the list on the right (step 2)

  

• Install HP Officejet 5740 & USB connection problems

  I recently bought a HP all-in-one OfficeJet 5740 printer for my desktop Dell XPS 8700-(Windows 8.1) and attempted to install, using the USB connection option. I was informed by the instructions of configuration to go online to a Dell website for the latest version of the installation software to download if I had access to the internet. I have DL'ed software and it apparently installed OK-(aucune erreur ou quoi que ce soit pour indiquer qu'il n'a pas abouti). Once finished with the installation of the software, I got to the window option connection-(wireless, usb cable ethernet cable). I chose the option of usb cable, however after having to then connect the USB cable to the printer and the computer via the usb cable, it tries to connect, but alerted me, stating; "Failed connection to printer, printer was not able to connect successfully via the usb cable. I tried this several times-(par moi-même et remote assist avec Support ordinateur Dell). I had the same problem last week when he tried with my old HP Officejet 6100, which I wanted to replace. I ran the program of doctor printing/scanning HP on the 5740 and it lists the printer and the software installed, however the HP printer install lists assistant the complete software package for the printer is not installed and some basic features drivers may be missing or damaged. Also when I go into Control Panel, then devices/printers, it displays the icon of 5740, however after rt - by clicking on the printer icon, instead of the regular menu that comes up to the top-(showing the complete properties, select this printer as the default printer, etc.), it displays a menu of smaller selections very-little (who don't understand not the "select as default printer"). I tried downloading the printer software two ways-(via the HP website on line 1, and then click the installation CD supplied with the printer, the same results. The printer was purchased 11/15/2014 and seems works very well-(tirages test-page, page d'alignement, etc.), but I can't print anything, and apparently it can not connect via the USB-(* j'ai acheté un nouveau câble usb 2.0 hier et, utilisé pour écarter la possibilité d'avoir un mauvais câble). My Dell computer is only 10 months old, and I upgraded to 8.1 Windows back on 25 October.  The USB ports on the computer all seem to work properly when connected to another USB device other than the 5740 printer.  What is the software apparently is not fully installed, with some missing drivers or, possibly, USB drivers should be updated? Any help would be appreciated. Thank you!!!

  Thanks for responding, but I was able to get the printer installed with the help of diagnostic, remotely in line with my computer manufacturer support staff. He was determined to be a software problem because of a recent update of Windows 8.1. Thanks for the effort!

• Aspire One d255 does not recognize the usb connected external ssd drive

  I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

  I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• iPhone 6s use usb connections in my car

  6s IiPhone uses usb connections in my car

  iPhone devices no load carrier via the USB Ports of the music player

• Photosmart C309 printer: change to usb connection

  I currently have a wireless connection to my computer.  How to change that to a USB, wired connection?

  Hey @dac71, welcome to the Forums of HP!

  I understand that you do not want to change to have a wireless connection to a USB connection between the printer and the computer. When you connect a USB cable, the printer automatically installs the correct driver and since you have already paid it works wirelessly, it would be seamless.

  If you're having trouble, and you have a Windows operating system, run the HP print and the doctor Scan with the USB cable connected and it will help: www.hp.com/go/tools.

  If you have a Mac and you need assistance let me know.

  If it meets your needs, please click Accept as Solution button below. If there is anything else I can help make sure you respond back and I will do my best to help!

  See you soon!

• Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

• Gigashot K40 - USB connection mode lights up when

  Hello.
  I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
  The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
  http://img9.imageshack.us/my.php?image=k40m.jpg
  Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
  I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
  Any ideas? I can solve the problem by myself or must I go to service?

  So soft reset didn't help I really don't know what you can try now.
  Call and ask what the problem is here.

  I thought that the rebate to zero must be the solution when the cam is source of confused.
  Please let us know what they tell you.

• USB connection does not work on my computer for hdr-cx260v

  It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

  When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

  My problem is trying to get the video from the cameras internal memory via the USB connection.

  I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

  Stone

  I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

• USB connection problem

  Whenever I connect my tab to any PC or laptop using the USB cable, it is not connect. It is not pop window on the USB connection. USB port works fine. Tab gets charged through this property. Functional disorder it is. Everyone will solve it?

  Hello and welcome to the HP support community!

  Need a few details.

  What tablet you are asking about?

  What OS is on your PC?

  Tried another cable?

  Usual suggestion is to unplug the devices and reboot the computer and tablet.  Check the settings of the tablet in storage/settings / < icon options, top right - looks like 3 blocks stacked vertically > / USB connection to the computer.

  See if the PSG is checked.  It is suitable for the transfer of all types of files.  Connect the devices.  If still no joy, try to uncheck MTP and PTP.  This should make the Tablet appear as a camera.

  I had to do with an old Win XP computer so that he can "wake up" and make the connection.  I then switched to the PSG and all was good!

  WyreNut

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

• HPE-150ff: HPE-150ff replace before USB 2.0 to 3.0

  Hello

  I was just wondering, if I replace the USB ports before 2, which are 2.0, with the latest USB 3.0? Who sells this material and how easy / difficult is it to replace the ports?

  Thanks in advance!

  milpai wrote:
  

  Hello

  I was just wondering, if I replace the USB ports before 2, which are 2.0, with the latest USB 3.0? Who sells this material and how easy / difficult is it to replace the ports?

  Thanks in advance!

  According to the specification, the card mother MS-7613 (Iona-GL8E)has only USB 2.0, which means it is not possible to simply switch to 3.0 for IO ports front without buying additional hardware.

  Check out this guide to upgrade to USB 3.0 for more information: http://www.pcworld.com/article/2043035/how-to-add-usb-3-0-to-your-desktop-pc.html

• C6380 usb connection

  My new C6380 works very well in wireless mode.  Can I simultaneously connect to a wired computer using the printer usb connection?

  Thank you, I tried it and it worked!  I was hesitant to try because the printer manual warned against it.

  Problem solved!